HPE 798152-B21 Getting Started Guide

QuickSpecs

HPE Apollo 2000 Chassis

Overview

Page 1

HPE Apollo 2000 Chassis

The Apollo 2000 System

he space and cost
savings of density
performance and workload capability into a small amount of datacenter space while delivering the efficiencies of a shared
infrastructure.

The Apollo 2000 System offers the configuration flexibility to support a variety of w
HPC clusters and everything in between.
chassis to meet the configuration needs of a wide variety of scale

The Apollo 2000 System
servers with all the traditional data center attributes
fits up to 20 Apollo r2000 series chassis accommodating up to 80 servers per rack.

With Apollo 2000 System servers there is flexibility to tailor the system to the precise needs of each workload with compute
flexible I/O and storage options.
different applications and it can even be deployed with a single server, leaving room to scale as customer’s needs grow.

The Apollo 2000 chassis comes with 4
The
HPE Apollo r2200 Chassis – 12 LFF

Item

Description

3

Right bezel ear

is the enterprise bridge to scale-out architecture for traditional data centers delivering t

-optimized infrastructure in a non-disruptive manner. It is a dense, multi-server platform that packs a lot of

orkloads, from remote site systems to large

And it can be deployed cost-effectively starting with a single 2U, shared infrastructure

-out workloads.

is a density-optimized, 2U shared infrastructure chassis for up to 4 ProLiant Gen9 independent, hot-plug

– standard racks and cabling and rear-aisle serviceability access. A 42U rack

and

Apollo 2000 System servers can be “mixed and matched” within a single chassis to support

new generation single rotor fans and an additional 4 fans can be added for redundancy.

power can be managed by the HPE Advanced Power Manager (HPE APM) an optional rack level manager.

1 Left bezel ear
2 Low-profile LFF hot-plug drives

4 Chassis serial label pull tab

QuickSpecs

HPE Apollo 2000 Chassis

Overview

Page 2

HPE Apollo r2600 Chassis – 24 SFF

HPE Apollo r2800 Chassis -24 SFF

Item

Description

2 SFF HPE SmartDrives

Item

Description

1 Left bezel ear
2 Low-profile LFF hot-plug drives
3 Right bezel ear
4 Chassis serial label pull tab

1 Left bezel ear

3 Right bezel ear
4 Chassis serial label pull tab

QuickSpecs

HPE Apollo 2000 Chassis

Overview

Page 3

Chassis Rear Panel Components / Four 1U Nodes

Item

Description

3 RCM module

7

Node 1

Chassis Rear panel Components / Two 2U Nodes

Item

Description

3 Power Supply 2

1 Node 4
2 Node 3

4 Power Supply 2
5 Power Supply 1
6 Node 2

1 Node 3
2 RCM module

4 Power Supply 1
5 Node 1

QuickSpecs

HPE Apollo 2000 Chassis

Overview

Page 4

Chassis Rear panel Components / Two 2U Nodes

Item

Description

2 Node 3

6 Node 2

Chassis Rear panel Component

Item

Description

1 Node 4

3 RCM module
4 Power Supply 2
5 Power Supply 1

7 Node 1

/ Two 2U Nodes

1 Node 3
2 RCM module
3 Power Supply 2
4 Power Supply 1
5 Node 1

QuickSpecs

HPE Apollo 2000 Chassis

Core Features

Page 5

Chassis

There are

NOTE:

workloads giving more flexible storage density for various applications. For more detail
information about flexible mapping,

http://h20564.www2.hpe.com/hpsc/doc/public/display?docId=c04604560

Each

Server Tray Blank Kit

acks are recommended to allow these

CAUTION:

spaces in the rack.

3 chassis options with different storage configurations

• HPE Apollo r2200 Chassis – 12 LFF hot-plug SAS or SATA HDDs or SSDs - allocated equally

across server nodes

• HPE Apollo r2600 Chassis – 24 SFF hot-plug SAS or SATA HDDs or SSDs - allocated equally

across server nodes

• HPE Apollo r2800 Chassis-24 SFF hot-plug SAS or SATA HDD or SSDs- allocated flexibly

across server nodes

r2800 supports flexible drive mapping enabling custom drive allocations to match

visit

HPE Apollo 2000 Chassis is built with the following:

• Four server slots for a chassis

• Up to two (2) 800W/1400W power supply for the chassis HPE Thermal Logic technology

for lower power consumption and airflow.

• Four (4) single rotor fans standard and an additional 4 fans can be added for redundancy

System Fans The Chassis ships standard with 4 single rotor fan modules.

A chassis requires that four (4) server tray slots be populated with either an HPE ProLiant XL170r,

XL190r server or an HPE Apollo 2000 Server Tray Blank Kit.

Rack Airflow
Requirements

HPE Apollo 2000 Chassis
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. For maximum cooling, HPE r
racks to be fully loaded with servers using the latest processors.

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment.

Always use blanking panels to fill all remaining empty front panel U-

This arrangement ensures proper airflow. Using a rack without blanking panels will result in
improper cooling that can lead to thermal damage.

QuickSpecs

HPE Apollo 2000 Chassis

Optional Fe

Page 6

HPE Insight

Virtual Connect Enterprise Manager (VCEM), and

Packard Enterprise or from your authorized reseller

Management software

atures

Insight Management Managing the growing number of servers can be complex and expensive

for your organization. IT managers need to address changing business
needs with tools that meet the challenges of managing today's complex
Datacenters.

HPE Insight Management lowers the cost of running your HPE ProLiant
servers by providing you with best-in-class management tools, including
HPE Insight Control, HPE
HPE Insight Dynamics/Matrix Operating Environment. Insight Management
increases your productivity and reduces your operating costs to get you
higher value from your HPE ProLiant servers.

Electronic download of Insight Management Media
Insight Management software media is available for free download (not
including license entitlement certificates) at this website:
http://www.hpe.com/go/insightupdates

Software media available for download includes:

• HPE Insight Control

• HPE Insight Control for Microsoft® System Center

• HPE Insight Control for VMware vCenter Server

• HPE Virtual Connect Enterprise Manager (VCEM)

• HPE Insight Dynamics / Matrix Operating Environment

Customers will receive an Insight Control or Insight Dynamics license
entitlement certificate via physical shipment or email. The license
entitlement certificate must be redeemed online or via fax in order to
obtain the license activation key(s).

One year of 24x7 Software Technical Support and Updates are included
with your purchased licenses.

Hewlett Packard Enterprise provides a complete range of installation and
support services to
ensure the successful deployment and operations of your server
infrastructure. For more information about support services and licensing
options, see the following website:

http://www.hpe.com/go/insightsoftware

Insight Software Media Kit (DVDs)
Physical media (DVDs) are also available for purchase from Hewlett

Service Pack for ProLiant Customers should use the HPE Service Pack for ProLiant (SPP) to perform

firmware, driver, and related software updates.