32 ✕ Max IDE
CD-ROM and
ISA Plug-n-Play
Audio Board
(CPL: 07/98 )
User definedUser
HP Vectra VL 6/xxx Series 8 PC 1-1
noNT
4.0
WS
None
defined
1
Page 2
1
HP Vectra VL 6/xxx Series 8 PC
Notes
All models have 512 KB of level 2 cache memory.
MIS Kit
The MIS kit for this product, containing support documentation and localized user
documentation, is available from the HP web site at:
http://www.hp.com/go/vectrasupport/
(pack of 20)
64-MB kit 32-bit SDRAM, 100 MHz non-ECC main memory moduleD6502A
64-MB kit 32-bit SDRAM, 100 MHz non-ECC main memory module
(pack of 20)
128-MB, 32-bit SDRAM, 100 MHz non-ECC main memory moduleD6503A
Documentation
User’s Guide Manual KitD5908A
Input Devices
HP Standard KeyboardC4735A
HP Scrolling Mouse C4736A
Video Displays
All current HP Displays (see the HP Vectra Accessory Service Handbook)
Mass Storage
4.3-GB IDE hard diskD2677A
6.4-GB IDE hard diskD5191A
D6504A
D6505A
1
Multimedia
Multimedia sound accessory kit (16-bit audio board and cable) - pack of 10D5183B
Multimedia sound accessory kit (32✕ Max CD-ROM drive, 16-bit audio
board)
32✕ Max IDE CD-ROM drive (pack of 10)D6656A
32✕ Max IDE CD-ROM drive D4384A
LAN Interfaces
HP NightDirector/100, 10/100BT Ethernet cardD6692A
HP NightDirector/100, 10/100BT Ethernet card (pack of 10)D3999A
3COM 3C905B-TX, 10/100BT Ethernet cardD6500A
3COM 3C905B-TX, 10/100BT Ethernet card (pack of 10)D6509A
Intel EtherExpress
Intel EtherExpress
Medium-Profile
Desktop Vectras
TM
PRO/100, 10/100BT Ethernet card D6507A
TM
PRO/100, 10/100BT Ethernet card (pack of 10)D6508A
HP Vectra VL 6/xxx Series 8 PC 1-3
D6657A
Page 4
HP Vectra VL 6/xxx Series 8 PC
System Board, BIOS, and Memory
1
System Board
Switches:
table on the next page.
Main Memory:
Three DIMM sockets which support
up to a maximum of 384 MB.
Install 32 MB, 64 MB or 128 MB
100 MHz SDRAM modules.
See the
Processor:
module with integrated
heatsink and level-2
cache memory.
Pentium II
1-4 HP Vectra VL 6/xxx Series 8 PC
Medium-Profile
Desktop Vectras
Page 5
HP Vectra VL 6/xxx Series 8 PC
System Board Switches
SwitchFunctionDefault
OpenNormal operation (system speed autoselected by the
1
Closed Sets system speed to 66 MHz
2-5—Processor frequency, see the following table—
OpenNormal operation
6
Closed Clears CMOS (to reload the Setup program defaults)
OpenNormal operation
7
Closed Clears User and Administrator passwords
OpenDisables keyboard power-on
8
Closed Normal operation
OpenNormal operation
9
Closed Crash recovery mode: forces booting in the BIOS boot
10—RESERVED — Do Not UseClosed
processor)
Closed
block area
Open
Open
Open
Open
Processor
Frequency
350 MHzOpenOpen
400 MHzOpenClosedOpenOpen
1
450 MHz
1.The 450 MHz option is not yet available in any model of the HP Vectra VL6/xxx Series 8 at
the time of printing. This information is provided for completeness only.
2345
OpenClosedOpenClosed
Switch
ClosedClosed
BIOS History
For the latest BIOS, the flasher utility program, and the BIOS history refer to the
HP World Wide Web site.