HP SuperStack II RAS Installation Manual
I/O M
®
UIDE
G
ODULE INSTALLATION
UPERSTACK
S
This guide describes how to install V.34 (analog), ISDN-BRI or a
combination of V.34 and ISDN-BRI modules into the RAS 1500 Base Unit
or RAS 1500 Expansion unit. It includes the following:
■
Overview
■
Related Documentation
■
Contacting 3Com
■
Before You Begin
■
Installing and Removing I/O Modules
■
Swapping I/O Modules
■
Powering the Unit On or Off
Visit 3Com’s web site (http://www.3Com.com/ras1500) for the latest
SuperStack II Remote Access System 1500 code and documentation.
EMOTE ACCESS SYSTEM
II R
1500
Part No. 1.024.1911 Rev 2.00
December, 1999
2
ODULE INSTALLATION GUIDE SUPERSTACK
I/O M
EMOTE ACCESS SYSTEM
II R
1500
Overview
Related Documentation
Contacting 3Com
The I/O modules are inserted into the RAS 1500 Base Unit or RAS 1500
Expansion unit. The RAS 1500 and RAS 1500 Expansion provide
remote-access services and terminal server functions, via analog and BRI
ISDN connections.
RAS 1500 documentation is available on the Resource CD that you
received with the Base Unit. The complete RAS 1500 documentation set
is available at
http://www.3com.com/ras1500
.
Use this chart as a reference when you need to contact 3Com.
Contacting 3Com
3Com Corp. - 5400 Bayfront Plaza - P.O. Box 58145 - Santa Clara, CA - 95052-8145
Internet http://www.3Com.com
For a complete listing of support and contact numbers, refer to Appendix
E, “Technical Support,” of the Installing and Configuring the RAS 1500
Guide.
Before You Begin
You Should Have
Received
Before you begin installation, you should:
■
confirm you have the required equipment,
■
check that your I/O Module package contains everything it should.
Contact your network administrator for assistance.
The following items should be included in your I/O Module package:
■
This I/O module installation guide,
■
a 4-port V.34 modem module or 2-port ISDN BRI module,
■
ISDN or regular telephone cables.
Loading...