HP (Hewlett-Packard) Q5927A, Q5928A, Q5930A, Q5929A User Manual

Product End-of-Life Disassembly Instructions

Product Category: LaserJet Printer

Marketing Name / Model

HP LaserJet 1320/ Q5927A HP LaserJet 1320n/ Q5928A HP LaserJet 1320tn/ Q5930A HP LaserJet 1320nw/ Q5929A

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as applicable.

Quantity

Item Description Notes

Printed Circuit Boards (PCB) or Printed Circuit Assemblies (PCA)

Batteries All types including standard alkaline and lithium coin

Mercury-containing components For example, mercury in lamps, display backlights,

Liquid Crystal Displays (LCD) with a surface greater than 100 sq cm

Cathode Ray Tubes (CRT) [not present] 0 Capacitors / condensers (Containing PCB/PCT) [not present] 0 Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height External electrical cables and cords - power cord 1 Gas Discharge Lamps [not present] Plastics containing Brominated Flame Retardants Plastic parts installed in close proximity to

With a surface greater than 10 sq cm 1320, 1320n, 1320 nw 1320tn

or button style batteries

scanner lamps, switches, batteries

Includes background illuminated displays with gas discharge lamps

heating/fusing units and paper path parts contain brominated flame retardants. Further, industry standard parts including fans, motors, cables, connectors, wiring and printed circuit boards also typically contain these flame retardants.

of items included in product

10 12

All motors, fans, connectors, wiring, and PC boards

Molded

LJ1320 7-20-06 EL-MF877-00 Page 1 Template Revision A

1320, 1320n, 1320 nw 1320tn

plastic parts: 33 36

Components and parts containing toner and ink, including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent chambers, and service stations.

- toner cartridges Components and waste containing asbestos [not present] 0 Components, parts and materials containing

[not present] 0

refractory ceramic fibers Components, parts and materials containing

[not present] 0

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where compone nts and materials requiring selective treatment can be removed.

Tool Description Tool Size (if

applicable)

Use standard hand tools.

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Remove toner cartridges and toner waste containers, if applicable.

2. Remove the outer housing skins and sort according to markings.

3. Disassemble the chassis using appropriate tools and set aside item s requiring selective treatment.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items contained in the product that require selective treatment (with descriptions and arrows identifying locations).

LJ1320 7-20-06 EL-MF877-00 Page 2 Template Revision A