HP ProLiant DL1000 Quickspecs
The HP ProLiant DL1000 Multi Node Server is the first multi node DL server designed for higher density and increased power
efficiency yet is flexible enough to be optimally configured for varying application requirements. The DL1000 supports up to four
independent HP ProLiant DL170h G6 Servers in the 2U HP ProLiant h1000 G6 Chassis. The servers share power supplies and fans,
providing greater power and cooling efficiencies. The HP ProLiant DL170h G6 Server is a two socket Intel server with 16 DDR3
DIMM slots.
3 Node 16SFF HDD Model Illustrated
3 Node 16SFF HDD Model Illustrated3 Node 16SFF HDD Model Illustrated
3 Node 16SFF HDD Model Illustrated
Front View:
Front View:Front View:
Front View:
Rear View:
Rear View:Rear View:
Rear View:
1.
16 DDR3 DIMM slots
1.
Video Port
2.
Optional Right Power Buttons, Health LEDs and UID bezel
2.
Low-Profile PCI Express x16 Gen2 slot
3.
16 2.5" SFF SAS/SATA hard drive bays (alternate
configuration available with 8 3.5" LFF SAS/SATA hard drive
bays)
3.
Serial Port
4.
One GbE LAN port (RJ-45)
4.
Optional Left Power Buttons, Health LEDs bezel
5.
One GbE LAN port with shared management (RJ-45)
5.
4 x 80mm system fans
6.
Two USB ports
6.
Quad-Core Intel® Xeon® 5500 series processors (supports
up to two per node)
7.
Optional dedicated management port (RJ-45)
8.
Power supply cable socket
7.
Low Profile PCIe x16 Gen2 Slot
9.
Full height / full length PCIe Gen2 Slot
8.
Access panel
10.
Full height / half length PCIe Gen2 Slot
11.
Power Button
12.
Health LED
13.
UID Button
What's New
What's NewWhat's New
What's New
New high efficiency power supplies.
New low voltage UDIMM
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Overview
DA - 13309 Canada — Version 31 — April 8, 2011
Page 1
NOTE:
NOTE: NOTE:
NOTE:
For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information - Factory
Integrated Models" section.
Processor
ProcessorProcessor
Processor
One of the following
depending on Model
Six-Core Processors
Six-Core ProcessorsSix-Core Processors
Six-Core Processors
Intel® Xeon® Processor X5670 (2.93 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo
2/2/2/2/3/3)
Quad-Core Processors
Quad-Core ProcessorsQuad-Core Processors
Quad-Core Processors
Intel® Xeon® Processor E5640 (2.66 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor L5630 (2.13 GHz, 12MB L3 Cache, 40W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
Intel® Xeon® Processor X5560 (2.80 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
Intel® Xeon® Processor X5550 (2.66 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo, 2/2/3/3)
Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5530 (2.40 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor L5530 (2.40 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor L5506 (2.13 GHz, 4MB L3 Cache, 60W, DDR3-800)
Intel® Xeon® Processor E5506 (2.13 GHz, 4MB L3 Cache, 80W, DDR3-800)
Intel® Xeon® Processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
NOTE:
NOTE:NOTE:
NOTE:
HT indicates that the processor model supports Intel® Hyper-Threading Technology
NOTE:
NOTE:NOTE:
NOTE:
Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost
Technology, with 4, 3, 2, and 1 cores active.
NOTE:
NOTE:NOTE:
NOTE:
DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
NOTE:
NOTE:NOTE:
NOTE:
For the Intel 5600 and 5500 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise
Performance/Wattage (Mainstream), and "L" denotes Lower Wattage.
NOTE:
NOTE:NOTE:
NOTE:
Up to 2 processors supported. Mixing different processor models is not supported.
Cache Memory
Cache MemoryCache Memory
Cache Memory
12MB (1 x 12MB) Level 3 cache
NOTE:
NOTE:NOTE:
NOTE:
All 5600 processor models.
8MB (1 x 8MB) Level 3 cache
NOTE:
NOTE:NOTE:
NOTE:
All 5500 series processor models except for those identified below.
4MB (1 x 4MB) Level 3 cache
NOTE:
NOTE:NOTE:
NOTE:
For processors L5506, E5506 and E5504.
Chipset
ChipsetChipset
Chipset
Intel® 5520 Chipset
NOTE:
NOTE:NOTE:
NOTE:
For more information regarding Intel chipsets, please see the following URL:
http://www.intel.com/products/server/chipsets/
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Standard Features
DA - 13309 Canada — Version 31 — April 8, 2011
Page 2
Upgradeability
UpgradeabilityUpgradeability
Upgradeability
Upgradeable to two processors (12 cores)
NOTE:
NOTE:NOTE:
NOTE:
DL170h G6 servers purchased with Intel Xeon 5500 Series processors are not upgradeable to
Intel Xeon 5600 series processors.
Memory Protection
Memory ProtectionMemory Protection
Memory Protection
Advanced ECC (multi-bit error protection)
Mirroring mode
Lockstep mode
Memory
MemoryMemory
Memory
Type
DDR3 Registered (RDIMM) and Unbuffered (UDIMM)
Standard (UDIMM) (per
server node)
6GB (3 x 2GB) PC3-10600E (DDR3-1333)
Maximum (RDIMM) (per
server node)
192GB (12 x 16GB) PC3-8500R (DDR3-800)
Maximum (UDIMM) (per
server node)
48GB (12 x 4GB) PC3-10600E (DDR3-1333)
NOTE:
NOTE:NOTE:
NOTE:
Depending on the memory configuration and processor model, the memory speed may run at
1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at
http://www.hp.com/go/ddr3memory-configurator
Network Controller
Network ControllerNetwork Controller
Network Controller
HP NC362i Integrated Dual Port Gigabit Server Adapter
Expansion Slots
Expansion SlotsExpansion Slots
Expansion Slots
Half Height Nodes (1U): One available PCI Express Gen 2.0 slots: (standard on 4-node BTO
model).
Slot 1: Low profile PCI-Express 2.0 x16
Full Height Nodes (2U): three available riser options:
Option 1: Up to three available PCI-Express Gen 2.0 slots:
Slot 1: full-length/full-height PCI-Express 2.0 x16
Slot 2: full-length/half-height PCI-Express 2.0 x4
Slot 3: low-profile PCI-Express 2.0 x4
Option 2: Up to three available PCI-Express Gen 2.0 slots:
Slot 1: full-length/full-height PCI-Express 2.0 x8
Slot 2: full-length/half-height PCI-Express 2.0 x8
Slot 3: low-profile PCI-Express 2.0 x8
Option 3: Up to two available PCI-Express Gen 2.0 slots: (standard on 2-node BTO model)
Slot 1: full-length/full-height PCI-Express 2.0 x16
Slot 2: low-profile PCI-Express 2.0 x8
Full-height PCIe Riser
Full-height PCIe RiserFull-height PCIe Riser
Full-height PCIe Riser
Option
OptionOption
Option
Expansion
ExpansionExpansion
Expansion
Slots #
Slots #Slots #
Slots #
Technology
TechnologyTechnology
Technology
Bus Width
Bus WidthBus Width
Bus Width
**
Connector
ConnectorConnector
Connector
Width
WidthWidth
Width
*
Bus Number
Bus NumberBus Number
Bus Number
Form Factor
Form FactorForm Factor
Form Factor
Notes
NotesNotes
Notes
1
PCI-Express
2.0
x16 x16
4
Full length,
full height
3.3 volts
2
PCI-Express
2.0
x4 x4
6
Full length,
half height
3.3 volts
3
PCI-Express
2.0
x4 x4
7
Low Profile
3.3 volts
Full-height PCIe Riser
Full-height PCIe RiserFull-height PCIe Riser
Full-height PCIe Riser
Expansion
ExpansionExpansion
Expansion
Technology
TechnologyTechnology
Technology
Bus Width
Bus WidthBus Width
Bus Width
**
Connector
ConnectorConnector
Connector
Bus Number
Bus NumberBus Number
Bus Number
Form Factor
Form FactorForm Factor
Form Factor
Notes
NotesNotes
Notes
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Standard Features
DA - 13309 Canada — Version 31 — April 8, 2011
Page 3
Option
OptionOption
Option Slots #
Slots #Slots #
Slots #
Width
WidthWidth
Width
*
1
PCI-Express
2.0
x8 x8
4
Full length,
full height
3.3 volts
2
PCI-Express
2.0
x8 x8
5
Full length,
half height
3.3 volts
3
PCI-Express
2.0
x8 x8
7
Low Profile
3.3 volts
Full-height PCIe Riser
Full-height PCIe RiserFull-height PCIe Riser
Full-height PCIe Riser
Option
OptionOption
Option
(Standard in 2 Node BTO
Models)
Expansion
ExpansionExpansion
Expansion
Slots #
Slots #Slots #
Slots #
Technology
TechnologyTechnology
Technology
Bus Width
Bus WidthBus Width
Bus Width
**
Connector
ConnectorConnector
Connector
Width
WidthWidth
Width
*
Bus Number
Bus NumberBus Number
Bus Number
Form Factor
Form FactorForm Factor
Form Factor
Notes
NotesNotes
Notes
1
PCI-Express
2.0
x16 x16
4
Full length,
full height
3.3 volts
3
PCI-Express
2.0
x8 x8
6
Low Profile
3.3 volts
Half-height PCIe Riser
Half-height PCIe RiserHalf-height PCIe Riser
Half-height PCIe Riser
(Standard in 4 Node BTO
Models and with half-
height nodes)
Expansion
ExpansionExpansion
Expansion
Slots #
Slots #Slots #
Slots #
Technology
TechnologyTechnology
Technology
Bus Width
Bus WidthBus Width
Bus Width
**
Connector
ConnectorConnector
Connector
Width
WidthWidth
Width
*
Bus Number
Bus NumberBus Number
Bus Number
Form Factor
Form FactorForm Factor
Form Factor
Notes
NotesNotes
Notes
1
PCI-Express
2.0
x16 x16
4
Low Profile
3.3 volts
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Indicates the number of physical electrical lanes running to the connector.
Storage Controller
Storage ControllerStorage Controller
Storage Controller
Non-Hot Plug SATA
Models
Embedded HP Smart Array Hot Plug Advanced Pack for B110i (RAID 0, 1,
10)
NOTE:
NOTE:NOTE:
NOTE:
Transfer rate: up to 3 Gb/s SATA
NOTE:
NOTE:NOTE:
NOTE:
To enable RAID on Embedded SATA (Windows and Linux only), use
the HP Smart Array B110i SATA Raid controller, To enable use of the B110i,
enter the ROM based setup utility(RBSU). The option for enabling RAID can
be found in the advanced section of the RBSU. For additional details
www.hp.com/go/SATARAID
. For RAID on Solaris, a Smart Array Controller
must be purchased.
Hot Plug SATA Models
Embedded HP Smart Array Hot Plug Advanced Pack for B110i (RAID 0, 1,
10)
NOTE:
NOTE:NOTE:
NOTE:
Transfer rate: up to 3Gb/s SATA
NOTE:
NOTE:NOTE:
NOTE:
The HP Smart Array B110i SATA Raid Hot Plug Advance Pack
provides the hot-plug and RAID support for the embedded SATA controller.
The Hot Plug Advance kit is a License to enable the RAID support on Hot
Plug models. It supports up to six 3G SATA hard disk drives. It will support a
maximum of two (2) logical drives. It supports Raid 0, 1 and 1+0. For
additional details
www.hp.com/go/SATARAID
Hot Plug SAS/SATA
Models
HP Smart Array Controller RAID 0,1,10, 5
NOTE:
NOTE:NOTE:
NOTE:
Transfer rate: up to 6GB/s SAS, 3Gb/s SATA
NOTE:
NOTE:NOTE:
NOTE:
SAS Upgrade: A HP Smart Array Controller is required for SAS HDD support. Transfer rate: 6.0
Gb/s SAS supported.
NOTE:
NOTE:NOTE:
NOTE:
When adding a Smart Array Controller to an 8 LFF SAS HDD configuration, a HP h1000 LFF
SAS CONTROLLER CABLE OPTION KIT (P/N 519503-B21) must be ordered to connect the Smart Array
Controller to the hard drive backplane. When a controller is added during a CTO buildup, the
appropriate cables are included and this kit is not required. This cable kit is only needed for BTO
configurations or if a CTO customer upgrades to a Smart Array Controller after initial purchase.
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Standard Features
DA - 13309 Canada — Version 31 — April 8, 2011
Page 4
NOTE:
NOTE:NOTE:
NOTE:
When adding a Smart Array Controller to a 16SFF SAS HDD configuration, an HP h1000 SFF
SAS CONTROLLER CABLE OPTION KIT (P/N 519507-B21) must be ordered to connect the Smart Array
Controller to the hard drive backplane. When a controller is added during a CTO buildup, the
appropriate cables are included and this kit is not required. This cable kit is only needed if a CTO
customer upgrades to a Smart Array Controller after initial purchase.
NOTE:
NOTE:NOTE:
NOTE:
An external diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is
needed to install storage controller drivers during a Windows operating system installation from a CD.
Internal Storage Devices
Internal Storage DevicesInternal Storage Devices
Internal Storage Devices
Diskette Drives
Via USB only
Optical Drives
DVD drive via USB only
NOTE:
NOTE:NOTE:
NOTE:
External support only.
Hard Drives
None ship standard
Drive Bays
One of the following
depending on Model
Up to 8 Hot plug SAS/SATA 3.5" drives
Up to 16 Hot plug SAS/SATA 2.5" drives
Maximum Internal
Maximum InternalMaximum Internal
Maximum Internal
Storage
StorageStorage
Storage
LFF 3.5" Hot Plug SATA
16.0TB
8 x 2TB
LFF 3.5" Hot Plug SAS
16.0TB
8 x 2TB
SFF 2.5" Hot Plug SATA
8.0TB
16 x 500GB
SFF 2.5" Hot Plug SAS
4.8TB
16 x 300GB
Interfaces
InterfacesInterfaces
Interfaces
Serial
1
Network RJ-45 (Ethernet)
2 10/100/1000 NIC ports (1 NIC shared for the HP ProLiant Lights Out
100i Remote Management)
Graphics
1
Management
1 Optional Dedicated LO100i Management Port
Health LED
1 rear per server node (Optional front health LED per server node)
Power
1 rear per server node (Optional front power button per server node)
UID
1 rear per server node (Optional front UID per chassis)
USB
3 (two rear, one internal)
NOTE:
NOTE:NOTE:
NOTE:
Please see the following URL for additional information regarding
USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html
.
Industry Standard
Industry StandardIndustry Standard
Industry Standard
Compliance
ComplianceCompliance
Compliance
ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0, DCMI 1.0. SMASH CLP compliant
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Standard Features
DA - 13309 Canada — Version 31 — April 8, 2011
Page 5
Graphics
GraphicsGraphics
Graphics
Integrated Matrox Graphics G200e, 32MB Standard
16 bit colour: maximum resolution of 1600 x 1200
32 bit colour: maximum resolution of 1280 x 1024
The following NVIDIA graphics cards are supported in the DL1000:
NVIDIA Quadro FX5800 512MB PCIe x 16 graphics card
NOTE:
NOTE:NOTE:
NOTE:
For more information on the latest visualization and acceleration qualification status, please see
http://www.hp.com/go/accelerators
.
NOTE:
NOTE:NOTE:
NOTE:
An HP DL170h Graphics Bracket/Cable Kit (P/N 536860-B21) is required when installing this
NVIDIA card. The FX5800 can only be installed in the 2 slot full-height riser option: HP DL170h I/O
Riser PCIe x16 x8 FIO option (P/N 512481-B21).
Server Power Cords
Server Power CordsServer Power Cords
Server Power Cords
One 6' Highline (IEC-IEC) power cord ships standard
NOTE:
NOTE:NOTE:
NOTE:
HP ProLiant DL servers are primarily connected to PDU's in data centre racks so they ship
standard with only a PDU power cord (416151-B21). If a user wishes to power a ProLiant DL server
using a 110V receptacle (NEMA-15), the NEMA power cord (227099-001) must be ordered separately.
NOTE:
NOTE:NOTE:
NOTE:
If customers require a local power cord, they can check the power cord matrix for the
appropriate cord. Please see the following power cord matrix:
http://www.hp.com/go/powercordmatrix
Advanced Power
Advanced PowerAdvanced Power
Advanced Power
Management: Power
Management: PowerManagement: Power
Management: Power
Management Controller
Management ControllerManagement Controller
Management Controller
In addition to the efficiencies gained by the shared power infrastructure, the DL1000 contains advanced
power metering and capping capabilities. The embedded Power Management Controller (PMC) is able
to monitor power consumption and throttle the speed of the processors and memory in each node within
the chassis in order to maintain a pre-set power budget. HP provides a simple command-line utility,
called HP ProLiant Power Interface Control (PPIC) Utility, for reading and configuring the power control
logic of the server nodes. Versions are available for MS Windows Server OS (2008 and 2008 R2) and
Linux OS (RHEL5 and SLES11) with the requirement that the OS IPMI Driver be installed. The following
Power Management modes for power redundancy are standard and are configurable in the controller:
No Redundancy - power control disabled. No power throttling will occur.
(DEFAULT) AC Redundancy with Throttling. This mode allows all nodes to share both power
supplies and run at maximum performance. Power control logic will only throttle the performance
of each node when the power draw by the chassis attempts to exceed the load supported by the
power supplies. In this mode, the box is expected to survive an unexpected AC Power loss to one
of the power supplies.
Full AC/DC Redundancy - power control logic will maintain a power cap value for the chassis at
the DC rating of a single power supply (750W, or 1200W), such that if one power supply
experiences a DC or AC failure, the chassis should remain on-line and operational.
Dynamic Power Capping is included with the LO100 Advanced Pack:
Dynamic Power Capping - User specifies the power envelope for the 2U chassis, within the
capabilities of the hardware installed. Users run a utility to calibrate the minimum and maximum
power consumption envelope for the chassis. In order to avoid any impact to performance due to
throttling, a User selectable Power Cap value should not be set below the minimum power value
provided by the utility.
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Standard Features
DA - 13309 Canada — Version 31 — April 8, 2011
Page 6
Common Slot Power
Common Slot PowerCommon Slot Power
Common Slot Power
Supplies
SuppliesSupplies
Supplies
HP has a new design for ProLiant power- the new Common Slot Power Supply bay. This design provides
the customer with commonality in power supplies across multiple platforms to save on the cost of spares
and allows HP to offer multiple power solutions to fit the customers' needs. Many HP ProLiant Servers
come with Common Slot, High Efficiency and Right-Size Power Supplies. The new HP Common Slot
power supplies are designed for the highest power efficiency without degrading performance of the
ProLiant server. Power Supplies have efficiency ratings up to 94%. There are multiple Right Size power
options available depending on the configuration of your server. To make sure you select the correct
power supply to meet your configuration, please use the HP Power Advisor at:
www.hp.com/go/proliant-
energy-efficient
or
www.hp.com/go/hppoweradvisor
. All HP Common Slot power sources are UL, CE
Mark Compliant, Hot Plug and Redundant.
There is a low cost, Industry Standard 1500W (2x750W) Power Supply option that does not support hotpluggability, redundancy or power capping functionality.
NOTE:
NOTE:NOTE:
NOTE:
Mixing of power supplies in the same chassis is not supported. All power supplies must be of the
same type, all 460W, all 750W 94%, all 750W 92%, all 1200W 94%, or all 1200W 90%. If nonmatched power supplies are inserted you will get errors and operation will fail.
It is highly recommended that you use the HP Power Advisor in defining the "Right-Size" power supply for
your needs. HP offers several Common Slot Power Supply Options for this platform. HP's ProLiant
Common Slot Power supplies meet multiple Energy Efficiency Initiatives.
NOTE:
NOTE:NOTE:
NOTE:
The 80 PLUS program is a unique forum that unites electric utilities, the computer industry, and
consumers in an effort to bring energy efficient technology solutions to the marketplace. 80 Plus
independently tests power supply efficiency and publicly posts the results on 80Plus.org.
Optional power supplies can be purchased through power supply option kits (see Power Supply Options
for part numbers).
System Fans
System FansSystem Fans
System Fans
4 x 80mm system fans ship standard; Non-hot plug, Non-redundant.
Required Cabling
Required CablingRequired Cabling
Required Cabling
For required cabling information, refer to the HP Web site at:
www.hp.com/servers/dl170h
.
Operating Systems and
Operating Systems andOperating Systems and
Operating Systems and
Virtualization Software
Virtualization SoftwareVirtualization Software
Virtualization Software
Support for ProLiant
Support for ProLiantSupport for ProLiant
Support for ProLiant
Servers
ServersServers
Servers
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Solaris
VMware ESX
Citrix XenServer
NOTE:
NOTE:NOTE:
NOTE:
For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server including how to purchase from
HP, please visit our OS Support Site at:
http://www.hp.com/go/ossupport
and our driver download
page
www.hp.com/support/DL170hG6
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Standard Features
DA - 13309 Canada — Version 31 — April 8, 2011
Page 7
Form Factor
Form FactorForm Factor
Form Factor
HP ProLiant h1000 G6 Chassis - 2U Chassis can support up to four DL170h server nodes in the 2U
chassis.
HP ProLiant DL170h G6 Server - Half-width system board. Half-height (1U) or full-height (2U)
depending on riser option selected.
HP offers two different drive cages for the 2U HP ProLiant h1000 G6 Chassis: 8 LFF HDD Cage or 16
SFF HDD Cage.
The 2U chassis can support three server node configurations:
Two full height nodes
One full height node and two half-height nodes
Four half-height nodes
4 Node Configuration - Front View
4 Node Configuration - Front View4 Node Configuration - Front View
4 Node Configuration - Front View
NOTE:
NOTE:NOTE:
NOTE:
For 2 node configurations, Nodes 2 and 4 are ordered. For 3 node configurations, Nodes 1, 2
and 4 are ordered.
NOTE:
NOTE:NOTE:
NOTE:
Additional nodes cannot be added later to 2 or 3 node configurations.
Embedded Manageability
Embedded ManageabilityEmbedded Manageability
Embedded Manageability
HP LO100 Advanced
HP LO100 AdvancedHP LO100 Advanced
HP LO100 Advanced
HP Lights-Out 100 with Optional LO100 Advanced Licenses for Virtual KVM
and Virtual Media.
Standard Features:
IPMI 2.0 & SMASH CLP support
ROM Setup Utility
Improvements to virtual media with the addition of USB 2.0 drives and
protocol support for much faster transfer speeds and DVD-ROM
support plus simplified virtual media (floppy and CD with no FTTP
server requirements)
Enhanced browser interface and embedded KVM over IP provides OSindependent remote graphical console
24x7 Technical Support and Update (TSU) 1 year support and license
upgrades included in Advanced license
For more information, see:
www.hp.com/go/lo100
.
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Standard Features
DA - 13309 Canada — Version 31 — April 8, 2011
Page 8
Security
SecuritySecurity
Security
Power-on password
Setup password
Diskette boot control
Secure Sockets Layer (SSL)
Secure Shell (SSH)
Warranty
WarrantyWarranty
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide
network of HP Authorized Channel Partners. Hardware diagnostic support and repair is available for one
year from date of purchase. Support for software and initial setup is available for 90 days from date of
purchase. Enhancements to warranty services are available through HP Care Pack services or
customized service agreements. Hard drives have either a one year or three year warranty; refer to the
specific hard drive QuickSpecs for details.
NOTE:
NOTE:NOTE:
NOTE:
Server Warranty includes 1 year Parts, 1 year Labour, 1-year on-site support with next business
day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR)
parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A
travel and labour charge will result when customers decline to replace a Mandatory CSR part; 2)
Optional CSR parts are also designed for easy replacement but may involve added complexity.
Customers may choose to have HP replace Optional CSR parts at no charge. Additional information
regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
.
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Standard Features
DA - 13309 Canada — Version 31 — April 8, 2011
Page 9
HP Insight Control
HP Insight ControlHP Insight Control
HP Insight Control
management software
management softwaremanagement software
management software
HP Insight Control for
HP Insight Control forHP Insight Control for
HP Insight Control for
Linux
LinuxLinux
Linux
HP Insight Control for Linux (IC-Linux), as a product option, delivers essential
lifecycle management that can help save time and money by integrating
discovery, server deployment, firmware updates & provisioning, health &
performance management, remote management, and virtualization. This
makes it easy to optimize your IT infrastructure through a single, simple
management console. The IC-Linux suite installs and licenses software
modules that are integrated into HP System Insight Manager (HP SIM).
HP Insight Control for Linux serves environments requiring Linux-based
management consoles. See
www.hp.com/go/ic-linux
.
HP Insight Control for Linux includes one year of 24 x 7 HP Software
Technical Support and Update Service ensuring rapid access to HP support
staff and proactive delivery of software updates. For more information about
this service, please visit:
http://www.hp.com/services/insight
.
HP Insight Control server
HP Insight Control serverHP Insight Control server
HP Insight Control server
deployment
deploymentdeployment
deployment
HP Insight Control server deployment is a deployment solution for HP
ProLiant and Integrity servers hosted on a Windows CMS. It automates the
process of deploying and provisioning server software, enabling companies
to quickly and easily adapt to changing business demands. Insight Control
server deployment includes software optimizations for HP servers, including
the HP scripting toolkits, configuration jobs for leading industry-standard
operating systems, sample unattended files, and HP server support packs that
include software drivers, management agents, and important documentation.
Deploying servers can be accomplished either through imaging or through
scripting.
Insight Control server deployment is hosted on a Windows server and is
intended for heterogeneous environments deploying Windows, Linux,
VMware ESX and Microsoft Hyper-V systems.
Insight Control server deployment includes one year of 24 x 7 HP Software
Technical Support and Update Service ensuring rapid access to HP support
staff and proactive delivery of software updates. For more information about
this service, please visit:
http://www.hp.com/services/insight
.
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Optional Features
DA - 13309 Canada — Version 31 — April 8, 2011
Page 10
Core Server Management
Core Server ManagementCore Server Management
Core Server Management
ProLiant 100 Series G6
ProLiant 100 Series G6ProLiant 100 Series G6
ProLiant 100 Series G6
Core Management
Core ManagementCore Management
Core Management
Software for ProLiant 100
Software for ProLiant 100Software for ProLiant 100
Software for ProLiant 100
Series Servers
Series ServersSeries Servers
Series Servers
HP provides management solutions that are designed to simplify a server's
installation, configuration, and maintenance throughout the entire server
lifecycle. This provides the customers with higher levels of operational
efficiency and highly reliable systems.
While ProLiant 100 series G6 servers do not support the Insight Foundation
Suite for ProLiant, they support a key subset of this important suite software
tools and utilities which are very suitable for this class of server: SIM, SMH,
agents, providers, and a SmartStart 'like' deployment CD called Easy Set-up
which greatly simplifies server set-up. Additionally the DL100 and SL100 G6
models support the SmartStart Scripting Toolkit (SSSTK), an automated
scalable deployment utility.
Information on core management supported on ProLiant 100 series G6
servers can be found at these URLS:
Core Management:
www.hp.com/go/coremanagement
HP ProLiant 100 series Easy Set-up CDs:
www.hp.com/servers/easysetup
Core Infrastructure
Core InfrastructureCore Infrastructure
Core Infrastructure
Management
ManagementManagement
Management
HP Systems Insight
Manager
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible standards-based environment to centrally manage servers, storage
and other infrastructure devices, (both HP and non-HP) across multiple
operating system platforms.
Insight Management
Agents
HP Insight Management Agents and Insight Management Providers are
available for HP Systems Insight Manager (SIM) Integration.
ProLiant 100-series G6 servers can use the same SNMP based Insight
Management Agents supported by other ProLiant servers. As a result,
administrators can use HP Systems Insight Manager (SIM) 5.3 and greater to
manage ProLiant 100-series G6 servers. Administrators can also use any
other SNMP- based management tool. These agents are obtained as part of
the ProLiant 100-series model-specific "Easy Set-up" CDs, or through
http://www.hp.com/servers/easysetup
The following capabilities are enabled on the 100-series G6 servers by the
SNMP agents:
Health monitoring capabilities, including monitoring for drives, fans,
network, power supplies, and temperature
Alerting capabilities, including basic alert notification for Smart Array
drive pre-failure only
Performance monitoring capabilities providing information on
processor, memory, disk free space, network utilization
For additional information, please see:
http://www.hp.com/go/insight
Easy Set-up CD
Easy Set-up CDs are available on all 100-series G6 servers and are also
available as an ISO image web download. HP ProLiant Easy Set-up CDs
provide easy, step-by-step, single and multi-server server utilities for the
ProLiant 100-series G6 servers to streamline server setup for 100-series G6
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Optional Features
DA - 13309 Canada — Version 31 — April 8, 2011
Page 11
servers. The user experience is consistent with SmartStart and offers the
following capabilities:
Boot environment and GUI
Assisted Installation: Windows 2003 Server and Windows 2008 Server
drivers
Manual installation: Windows 2003 Server, Windows 2008 Server,
and Linux drivers (specific OS support varies by server. Refer to each
server's QuickSpecs for supported versions)
HP Insight Diagnostics
AutoRun
Array Configuration Utility (ACU) has been combined with Array
Diagnostics Utility (ADU) to offer both configuration of array
controllers and storage devices and testing of array controller
hardware
SmartStart Scripting Toolkit (SSSTK) and Smart Components for
software and drivers
NOTE:
NOTE:NOTE:
NOTE:
OS and SW available for Manual Installation are listed on each
servers' QuickSpecs.
SmartStart Scripting Toolkit
(SSSTK)
The SmartStart Scripting Toolkit is a server deployment product that delivers
an unattended automated installation for high-volume server deployments.
The SmartStart Scripting Toolkit includes a set of utilities for configuring and
deploying servers in a customized, predictable, and unattended manner.
These utilities enable you to duplicate the configuration of a source server on
target servers with minimum user interaction.
The Toolkit is designed for IT experts with experience in scripting operating
system installations and configuring ProLiant server hardware.
For additional information, please see:
http://h18004.www1.hp.com/products/servers/management/toolkit/
index.html
Subscriber's Choice
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice
and customize your profile to
receive various new alerts as they become available, on a weekly or monthly
basis.
ROMPaq, software and
latest drivers
The latest software, drivers, and firmware fully optimized and tested for your
ProLiant server and options; downloaded from Software and Drivers
download pages website at:
http://www.hp.com/go/support
and from
www.hp.com/servers/easysetup
. Contains the following:
HP Insight Management Agents for Systems Insight Manager (SIM)
Integration
HP Systems Management Homepage
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU)
HP Insight Diagnostics
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Optional Features
DA - 13309 Canada — Version 31 — April 8, 2011
Page 12
High Performance
High PerformanceHigh Performance
High Performance
Clusters
ClustersClusters
Clusters
HP Cluster Platforms
HP Cluster Platforms are specifically engineered, factory-integrated largescale ProLiant clusters optimized for High Performance Computing, with a
choice of servers, networks and software. Operating system options include
specially priced offerings for Red Hat Enterprise Linux and Novell SLES, as
well as Microsoft Windows HPC Server. A Cluster Platform Configurator
simplifies ordering.
http://www.hp.com/go/clusters
HP HPC Interconnects
High Performance Computing (HPC) interconnect technologies are available
for this server as part of the HP Cluster Platform portfolio. These high-speed
InfiniBand and Gigabit interconnects are fully supported by HP when
integrated within an HP cluster. Flexible, validated solutions can be defined
with the help of configuration tools.
http://www.hp.com/techservers/clusters/ucp/index.html
HP Cluster Management
Utility
HP Cluster Management Utility (CMU) is an HP-licensed and HP-supported
suite of tools that are used to manage large-scale Linux ProLiant systems.
CMU includes software for the centralized provisioning, management and
monitoring of nodes. CMU makes the administration of clusters user friendly,
efficient, and effective.
http://www.hp.com/go/cmu
HP HPC Linux Value Pack
HP HPC Linux Value Pack (Value Pack) is an HP-licensed and HP-supported
specially priced software bundle for the development and deployment of
applications on HPC Cluster Platforms. Value Pack includes the Platform
HPC Enterprise Edition suite of tools including the LSF workload scheduler,
the HP-MPI parallelization library. Also included are the HP Unified Parallel
C compiler and the HP Shmem library, as well as the execution environments
for the libraries and compiler.
HP HPC Linux Value Pack
Factory Express Portfolio
Factory Express PortfolioFactory Express Portfolio
Factory Express Portfolio
for Servers and Storage
for Servers and Storagefor Servers and Storage
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to:
http://www.hp.com/go/factory-express
.
HP Enterprise
HP EnterpriseHP Enterprise
HP Enterprise
Configurator
ConfiguratorConfigurator
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our
valued customers. If you require "custom" rack configuration, please contact HP's Customer
Business Centre or an Authorized Partner for assistance.
http://www.hp.com/products/configurator
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Optional Features
DA - 13309 Canada — Version 31 — April 8, 2011
Page 13
Service and Support
Service and SupportService and Support
Service and Support
HP Technology Services for Industry Standard Servers and BladeSystem
HP Technology Services for Industry Standard Servers and BladeSystemHP Technology Services for Industry Standard Servers and BladeSystem
HP Technology Services for Industry Standard Servers and BladeSystem
Capitalizing on HP ProLiant server and HP BladeSystem capabilities requires a service partner who
understands your increasingly complex business technology environment. That's why it makes sense to
team up with the people who know HP infrastructure hardware and software best - the experienced
professionals at HP Services.
What HP ProLiant and BladeSystem Services can do for you
What HP ProLiant and BladeSystem Services can do for youWhat HP ProLiant and BladeSystem Services can do for you
What HP ProLiant and BladeSystem Services can do for you
HP ProLiant and BladeSystem Services can help you design, deploy, test, integrate, support, and manage
IT and infrastructure solutions. This way, HP proposes services solutions that include more than just uplift
of base warranty. You can get the support you need by choosing from one of a number of service
packaged solutions we have designed to address wider set of customer support needs:.
HP Technology Services meets business challenges with services offered in three packages -
Optimized
OptimizedOptimized
Optimized
Care Package, Standard Care Package, and Basic Care Package
Care Package, Standard Care Package, and Basic Care PackageCare Package, Standard Care Package, and Basic Care Package
Care Package, Standard Care Package, and Basic Care Package
- available for each product group.
Such packaged solutions enable customers to optimize technology operations, minimize risk and drive
better business outcomes with easy-to-buy, easy-to-use scalable support packages for servers, storage,
networking and software.
Optimized Care
Optimized CareOptimized Care
Optimized Care
Optimized Care Package: Supports maintaining servers at optimum performance availability
Optimized Care Package: Supports maintaining servers at optimum performance availabilityOptimized Care Package: Supports maintaining servers at optimum performance availability
Optimized Care Package: Supports maintaining servers at optimum performance availability
HP ProLiant Server Hardware Installation
HP ProLiant Server Hardware InstallationHP ProLiant Server Hardware Installation
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner.
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
HP Installation and Startup for Insight Control Software
HP Installation and Startup for Insight Control SoftwareHP Installation and Startup for Insight Control Software
HP Installation and Startup for Insight Control Software
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL
series servers or HP BladeSystem servers.
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-
9972ENW.pdf
3-Year HP Critical Advantage
3-Year HP Critical Advantage3-Year HP Critical Advantage
3-Year HP Critical Advantage
Provides end-to-end infrastructure support solution for business critical applications running on
virtualized/x86 infrastructures, enabling the customers to cost effectively build, operate, and continuously
improve their IT environment.
http://h20195.www2.hp.com/V2/GetDocument.aspx?docname=4AA3-
1772ENW
Additional Services
Additional ServicesAdditional Services
Additional Services
: Microsoft or Linux or VMware education courses + Facility & technology
environmental assessment services + Energy Efficiency Design, Factory Express
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Service and Support
DA - 13309 Canada — Version 31 — April 8, 2011
Page 14
Standard Care
Standard CareStandard Care
Standard Care
Standard Care Package: Package that maintains high level of server availability
Standard Care Package: Package that maintains high level of server availabilityStandard Care Package: Package that maintains high level of server availability
Standard Care Package: Package that maintains high level of server availability
HP ProLiant Server Hardware Installation
HP ProLiant Server Hardware InstallationHP ProLiant Server Hardware Installation
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
HP Installation and Startup for Insight Control Software
HP Installation and Startup for Insight Control SoftwareHP Installation and Startup for Insight Control Software
HP Installation and Startup for Insight Control Software
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL
series servers or HP BladeSystem servers
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-
9972ENW.pdf
3-Year HP 6 hour Hardware Support Onsite Call-to-Repair Service
3-Year HP 6 hour Hardware Support Onsite Call-to-Repair Service3-Year HP 6 hour Hardware Support Onsite Call-to-Repair Service
3-Year HP 6 hour Hardware Support Onsite Call-to-Repair Service
Provides an IT manager with a team of support specialists who will quickly begin troubleshooting the
system to help return the hardware to operating condition within 6 hours of the initial service request to
the HP Global Solution Centre
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6636ENN
3-Year , HP 24x7 Software Support for Insight Control
3-Year , HP 24x7 Software Support for Insight Control3-Year , HP 24x7 Software Support for Insight Control
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL
series servers or HP BladeSystem servers
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
Additional Services
Additional ServicesAdditional Services
Additional Services
: Software OS (Microsoft, Linux (SUSE/Red Hat) & VMware Installation & Start Up,
and Software Support; Install and Startup Services for Insight Control; Microsoft or Linux or VMware
education courses; +30 Proactive Select Credits, Factory Express
Basic Care
Basic CareBasic Care
Basic Care
Basic Care Package: delivers minimum recommended support service level
Basic Care Package: delivers minimum recommended support service levelBasic Care Package: delivers minimum recommended support service level
Basic Care Package: delivers minimum recommended support service level
HP ProLiant Server Hardware Installation
HP ProLiant Server Hardware InstallationHP ProLiant Server Hardware Installation
HP ProLiant Server Hardware Installation
Provides for the basic hardware installation of HP branded servers, storage devices and networking
options to assist you in bringing your new hardware into operation in a timely and professional manner
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-9356EN
HP Installation and Startup for Insight Control Software
HP Installation and Startup for Insight Control SoftwareHP Installation and Startup for Insight Control Software
HP Installation and Startup for Insight Control Software
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL
series servers or HP BladeSystem servers
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-
9972ENW.pdf
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
3-Year HP 24x7 4 hour Response, Hardware Support Onsite Service
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL
series servers or HP BladeSystem servers
http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA0-
9972ENW.pdf
3-Year , HP 24x7 Software Support for Insight Control
3-Year , HP 24x7 Software Support for Insight Control3-Year , HP 24x7 Software Support for Insight Control
3-Year , HP 24x7 Software Support for Insight Control
Provides for the deployment and basic configuration of HP Insight Control on HP ProLiant ML and DL
series servers or HP BladeSystem servers
http://h20195.www2.hp.com/V2/GetPDF.aspx/5981-6645EEE.pdf
Additional Services
Additional ServicesAdditional Services
Additional Services
: Software OS (Microsoft, Linux (SUSE/Red Hat) & VMware Installation & Start Up
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Service and Support
DA - 13309 Canada — Version 31 — April 8, 2011
Page 15
and Software Support); +10 Proactive Select Credits, Factory Express
Insight Remote Support
Insight Remote SupportInsight Remote Support
Insight Remote Support
The packages include HP Insight Remote Support that uses proven technology to deliver secure, reliable
24x7 remote monitoring, diagnoses, and problem resolution. It is available at no additional cost to all
warranty, HP Care Pack Service, and service agreement customers.
For more information
For more informationFor more information
For more information
To learn more on HP ProLiant servers and HP BladeSystem servers, please contact your HP sales
representative or HP Authorized Channel Partner. Or visit:
http://www.hp.com/services/proliant
QuickSpecs
HP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node ServerHP ProLiant DL1000 Multi Node Server
HP ProLiant DL1000 Multi Node Server
Service and Support
DA - 13309 Canada — Version 31 — April 8, 2011
Page 16
Loading...