HP ProLiant BL460c Generation 9 (Gen9) Server Blade - Internal View
1.
FlexibleLOM adapter
2.
Nand Flash & Micro SD
3.
Mezzanine Slots (x16 PCI 3.0)
4.
Sixteen (16) DDR4 DIMM memory slots (8 per
processor)
5.
Up to two (2) Intel® Xeon® E5-2600 v3 family
processors
6.
USB 3.0 and TPM
7.
Embedded SATA Connector
8.
Solid State Device Connector
9.
Two hot-plug drive bays
10.
HP Smart Array P244br Controller with 1GB FBWC
11.
iLO Management Engine
What's New
Flexible Controller Options
Support for 2133MHz DDR4 memory
Support for 12Gb SAS internal hard drives and 12Gb SAS storage controller offerings
Support for the Intel E5-2600 v3 Product Family
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 1
HP ProLiant BL460c Generation 9 (Gen9) Server
QuickSpecs
Blade
Standard Features
This document covers the HP ProLiant BL460c Gen9 server blade only. For information on HP BladeSystems c-Class
Enclosures and HP BladeSystem c-Class Interconnect and Mezzanine Components, please see the following:
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c7000 Enclosure QuickSpecs at
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components at
The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
NOTE:
configured with 10 fans and the c3000 enclosure to be configured with 6 fans.
NOTE:
Connect are required and available via the HP Service Pack for ProLiant, please see http://www.hp.com/go/spp/download
NOTE:
Factory Integrated Models" section.
Processor
One of the following
depending on Model
For optimal cooling and system performance the BL460c Gen9 Server Blade requires the c7000 enclosure to be
For proper BladeSystem operation, the minimum required versions of HP Onboard Administrator and HP Virtual
For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information -
E5-2600 v3 series Processors
HP BL460c Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2623v3 (3GHz/4-core/10MB/105W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W) Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W) Processor Kit
NOTE:
E5-2643 v3, the E5-2637 v3, or the E5-2667 v3 is used. In a 2 processor configuration, there are
twelve (12) total available DIMM slots.
NOTE:
DIMM slots 4 and 5 are not accessible when either the E5-2699 v3, the E5-2697 v3, the
For the maximum supported memory speeds for each processor listed above, please
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 2
QuickSpecs
Standard Features
reference the 'Memory Speed by Processor Model' table in the Memory section of the
QuickSpecs.
NOTE:
NOTE:
Technology. The frequency boost increment is dependent on the processor SKU and the number
of active cores. In general, a higher boost increment is obtained when fewer cores are active.
NOTE:
depend on the quantity and type of DIMMs installed.
NOTE:
NOTE:
indicates the Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is
socket/segment designation, 00 = Processor SKU, and x = L for low power SKUs.
NOTE:
installed in processor slot 1 for access to the first mezzanine expansion slot (expansion slot 1). A
processor must be installed in processor slot 2 for access to the second mezzanine expansion
slot (expansion slot 2).
NOTE:
NOTE: All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies
except the E5-2603 v3 and E5-2609 v3.
NOTE:
NOTE:
speed memory can operate. Please see the see the "Memory" section later in this document.
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
HT indicates that the processor model supports Intel® Hyper-Threading Technology.
Turbo indicates the maximum potential frequency when using Intel® Turbo Boost
DDR4 speed is the maximum memory speed of the processor. Actual memory speed may
Supports 1 or 2 processors. Mixing different processor models is not supported.
For the Intel® C610 Chipset E5-2600 v3 Series, the letter preceding the model number
The BL460c Gen9 includes two I/O mezzanine expansion slots. A processor must be
All processors within the server must be identical.
The letter "L" following the model number indicates denotes lower wattage.
The processor model as well as the memory configuration determines the maximum
Cache Memory
One of the following
depending on Model
Chipset
45MB (1x45MB) L3 cache
NOTE:
40MB (1x40MB) L3 cache
NOTE:
35MB (1x35MB) L3 cache
NOTE:
30MB (1x30MB) L3 cache
NOTE:
25MB (1x25MB) L3 cache
NOTE:
20MB (1x20MB) L3 cache
NOTE: For Six or Eight-core processors.
15MB (1x15MB) L3 cache
NOTE:
10MB (1x10MB) L3 cache
NOTE:
Intel® C610 Series Chipset
Intel® E5-2600v3 Processor Family
NOTE:
http://www.intel.com/products/server/chipsets/
For Eighteen-core processors.
For Sixteen-core processors.
For Fourteen-core processors.
For Twelve-core processors.
For Ten-core processors.
For Quad or Six-core processors.
For Quad-core processors.
For more information regarding Intel chipsets, please see the following:
.
Upgradeability
On System
Management Chipset
Upgradeable to two (2) processors
HP iLO (Firmware HP iLO4 2.0), 4GB NAND with 1GB USB user space configurable via UEFI and
accessible via iLO. Read and learn more in the
NOTE:
For more information, visit:
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
http://www.hp.com/go/ilo
iLO QuickSpecs
.
Page 3
QuickSpecs
Standard Features
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
Memory Protection
Memory
One of the following
depending on Model
Advanced ECC
Memory Online Spare Mode (Rank Spare Mode)
Type
Standard (Preconfigured Models)
Maximum (LRDIMM)
Maximum (RDIMM)
NOTE:
HP SmartMemory is required to realize the memory performance improvements and enhanced
functionality listed in this document for Gen9. For additional information, please see the HP
SmartMemory QuickSpecs at:
run at 2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or the Online
Memory Configuration Tool at:
HP memory from previous generation servers (DDR3) is not compatible with this server.
LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a
Depending on the memory configuration and processor model, the memory speed may
HP SmartMemory
DDR4 Load Reduced (LRDIMM), or Registered (RDIMM)
128GB (4 x 32GB) DDR4 2133MHz RDIMMs at 1.2V
64GB (4 x 16GB) DDR4 2133MHz RDIMMs at 1.2V
32GB (2 x 16GB) DDR4 2133MHz RDIMMs at 1.2V
32GB (2 x 16GB) DDR4 2133MHz RDIMMs at 1.2V
16GB (2 x 8GB) DDR4 2133MHz RDIMMs at 1.2V
16GB (2 x 8GB) DDR4 2133MHz RDIMMs at 1.2V
512GB (16 x 32GB) up to 2133MHz at 1.2V
256GB (16 x 16GB) up to 2133MHz at 1.2V
http://h22195.www2.hp.com/MemoryTool/Home/Legal
Network Controller
One of the following
depending on Model
One (1) 20Gb 2-port FlexFabric FLB, 10Gb 2-port HP FlexFabric FLB, or 10Gb 2-port Ethernet
FLB
NOTE:
and autosensing 10Gb/1Gb Ethernet.
NOTE:
Class interconnect components. Both ports will operate at the same speed.
NOTE:
Fibre Channel over Ethernet (FCoE) is supported with HP interconnects. Learn more at:
http://www.hp.com/go/bladesystem/interconnects
One (1) HP FlexFabric 10Gb 2-port 536FLB FlexibleLOM
One (1) HP FlexFabric 20Gb 2-port 650FLB FlexibleLOM
NOTE:
Standard iLO Network Controller:
One (1) 10/100 Mbps port for the HP iLO 4 to Onboard Administrator link. The Onboard
Administrator (with 10/100/1000 Mbps) to BladeSystem link is 1Gbps
Each port is autosensing the speed, and can interoperate with 1Gb HP BladeSystem c-
FlexFabric capabilities require the use of an HP Virtual Connect FlexFabric module.
FlexibleLOMs are not compatible with prior generation c-Class server blades
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 4
QuickSpecs
Standard Features
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
Expansion Slots
HP Server ROM
Two (2) I/O expansion mezzanine slots:
x16 PCIe 3.0 Type A (supports Type A mezzanine cards) (expansion slot 1).
NOTE:
interconnect module bay 3 and the other to bay 4.
x16 PCIe 3.0 Type B (supports Type A and Type B mezzanine cards (expansion slot 2).
NOTE:
port cards, one port is routed to interconnect module bay 5 and the other to bay 6. For
quad-port cards, one port is routed to interconnect module bay 5, one to bay 6, one to bay
7, and one to bay 8.
NOTE:
second expansion slot (expansion slot 2).
Mezzanine card options include:
Dual-port 20Gb FlexFabric, Dual-port 10Gb FlexFabric, 10GbE options, and quad-port 1Gb
Ethernet server adapter mezzanine options for additional network ports.
Dual-port 16Gb Fibre Channel HBA for SAN connectivity.
QDR and FDR InfiniBand for low latency and high bandwidth server interconnectivity.
I/O accelerator mezzanine options for high transaction rate local storage
HP ROM (read only memory) is now digitally signed using HP's Corporate Signing Service. This
signature is verified before the flash process starts, reducing accidental programming and
preventing malicious efforts to corrupt system ROM.
This expansion slot supports dual-port mezzanine cards: one port is routed to
This expansion slot supports dual-port and quad-port mezzanine cards. For dual-
A second processor must be installed (in processor slot 2) to have access to the
HP ROM provides for essential initialization and validation of hardware components before
control is passed to the customer-installed operating system. The ROM also provides the
capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to
continue operation to the operating system.
HP ROM performs very early configuration of the video controller, to allow monitoring of
initialization progress via an attached monitor. If configuration or hardware errors are discovered
during this early phase of hardware initialization, suitable messages are now displayed on the
connected monitor. Additionally, these configuration or hardware errors are logged to the
Integrated Management Log (IML) to assist in diagnosis.
HP's ProLiant ROM is used to configure the following:
Processor and chipset status registers
System memory, memory map, and memory initialization
System hardware configuration (integrated PCI devices and optional PCIe cards).
Customer-specific BIOS configuration using the HP ROM-Based Setup Utility (RBSU).
NOTE:
www.hp.com/support/rbsu
For further information, please refer to HP's RBSU (ROM based setup utility) user guide:
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 5
QuickSpecs
Standard Features
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
HP Server UEFI
/Legacy ROM
Unified Extensible Firmware Interface (UEFI) is an industry standard that provides better
manageability and more secured configuration while interacting with your server at boot time. HP
ProLiant Gen9 platform defaults to UEFI and can be factory or field configured for Legacy BIOS
Boot Mode.
NOTE:
(RBSU) of legacy BIOS. For more information, please visit
UEFI enables numerous new capabilities specific to HP ProLiant servers such as:
NOTE:
NOTE:
properly to support UEFI.
NOTE:
mode in the factory.
The UEFI System Utilities function is analogous to the HP ROM-Based Setup Utility
http://www.hp.com/go/proliantuefi/docs
Secure Boot
Operating system specific functionality
Support for > 2.2 TB (using GPT) boot drives
USB 3.0 Stack
Embedded UEFI Shell
Mass Configuration Deployment Tool using HP RESTful API
PXE boot support for IPv6 networks
Boot support for option cards that only support a UEFI option ROM
For more information please visit www.hp.com/go/proliant/uefi
For UEFI Boot Mode, boot environment and OS image installations should be configured
HP UEFI FIO Setting (758959-B22) can be selected to configure the system in Legacy
Storage Controller
Maximum Internal
Storage
One of the following
depending on Model
Interfaces
All BTO Models
Hot Plug SFF SAS
Hot Plug SFF SATA
Hot Plug SFF SAS SSD
Hot Plug SFF SATA
SSD
NOTE:
The ProLiant BL460c Gen9 server includes the HP hot plug small form factor (SFF)
SmartDrive carrier for enhanced management and reduced maintenance errors. HP drives from
previous generation servers (prior to Gen8) are not compatible with the ProLiant BL460c Gen9
drive bays.
Micro SDHC Slot
USB 3.0 Port
NOTE:
The above options are intended for integrated hypervisor virtualization environments.
One (1) HP Smart Array P244br Controller with 1GB Flash-Backed
Write Cache (FBWC) supporting RAID 0 and RAID 1, or HP H244br
Smart HBA.
NOTE:
the HP B140i (chipset SATA). Support two (2) small form factor (SFF)
hot plug drive bays.
2.4TB
2.0TB
3.2TB
1.6TB
One (1) internal Micro Secure Digital High Capacity (Micro SDHC) card
slot
One (1) internal USB 3.0 connector for USB flash media drive keys
The HP Smart Array P244br, the HP H244br Smart HBA, and
2 x 1.2TB
2 x 1.0TB
2 x 1.6TB
2 x 800GB
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 6
QuickSpecs
Standard Features
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
Industry Standard
Compliance
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
ACPI 2.0
Microsoft® Logo certifications
USB 3.0 Support
IPMI 2.0
Secure Digital 2.0
TPM 1.2 Support
IEEE (specific IEEE standards depending on Ethernet adapter card(s) installed)
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
SNMP
SSL 2.0
DMTF Systems Management Architecture for Server Hardware Command Line Protocol (SMASH
CLP)
Active Directory v1.0
PCIe 3.0
ASHRAE 3.0
FIPS 140-2 Level-2 certification pending
Microsoft Windows Server
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Canonical Ubuntu
Oracle Solaris
VMware
Citrix XenServer
NOTE:
For more information on HP's Certified and Supported ProLiant Servers for OS and
Virtualization Software and latest listing of software drivers available for your server, please visit
our Support Matrix at:
http://www.hp.com/support/BL460cGen9
http://www.hp.com/go/ossupport
and our driver download page:
Enclosures
Graphics
HP offers two different c-Class server blade enclosures to meet your individual needs:
The HP BladeSystem c7000 rack enclosure is 10U high and holds up to sixteen (16)
ProLiant BL460c Gen9 servers plugged vertically.
The HP BladeSystem c3000 rack enclosure is 6U high and holds up to eight (8) HP
ProLiant BL460c Gen9 servers plugged horizontally.
Server blades, storage blades, interconnect modules, power supplies, fans, and redundant
Onboard Administrator modules are all designed to fit into the c3000 and c7000 enclosures.
NOTE: For additional enclosure information, please see:
16 MB Flash Video Memory
256 MB DDR 3 with ECC (112 MB after ECC and video)
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 7
QuickSpecs
Standard Features
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
Form Factor
Embedded
Management
Server Utilities
HP ProLiant BL460c Gen9 is a half-height server blade that plugs into the HP BladeSystem
c3000 and c7000 enclosures.
HP Integrated Lights
Out
UEFI
HP RESTful API
Intelligent Provisioning
HP Smart Update
HP Systems Insight
Manager (HP SIM)
Scripting Tool Kit and
Windows PowerShell
HP RESTful Interface
Tool
HP iLO Mobile
Application
HP Insight Online
Monitor your servers for ongoing management, service alerting,
reporting and remote management with iLO. Learn more at
www.hp.com/go/ilo
Configure and boot your servers securely with industry standard Unified
Extensible Firmware Interface (UEFI). Learn more at
www.hp.com/go/ProLiant/uefi
RESTful API is an application programming interface. RESTful Web
Service API served by iLO's web server.
www.hp.com/go/restfulapi
Provision servers by discovering and deploying 1 to few servers with
Intelligent Provisioning. Learn more at
www.hp.com/go/intelligentprovisioning
Optimize firmware and driver updates with HP Smart Update solutions.
Learn more at
HP SIM allows you to monitor the health of your HP ProLiant Servers
and HP Integrity Servers, and also provides you with basic support for
non-HP servers. HP SIM also integrates with HP SUM to provide quick
and seamless firmware updates. Learn more at
Provision 1 to many servers using your own scripts to discover and
deploy them with HP Scripting Tool Kit for Windows and Linux or HP
Scripting Tools for Windows PowerShell. Learn more at
www.hp.com/go/ProLiantSTK
HP RESTful API tool is a scripting tool to provision servers using
RESTful API Interface to discover and deploy servers at scale. Learn
more at
Enables the ability to access, deploy, and manage your server anytime
from anywhere from select smartphones and mobile devices. For
additional information please visit:
HP Insight Online, available at no additional cost as part of your HP
warranty, Care Pack or contractual support agreement with HP, is a
personalized dashboard for simplified tracking of IT operations and
support information from anywhere, anytime. Learn more at
www.hp.com/go/insightonline/info
www.hp.com/go/restfulapi
.
.
.
.
www.hp.com/go/smartupdate
or
www.hp.com/go/powershell
.
www.hp.com/go/ilo/mobileapp
.
www.hp.com/go/sim
.
.
.
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 8
QuickSpecs
Standard Features
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
Security
Availability
Administrator's password
Keyboard password (QuickLock)
HP iLO Management On System Management Chipset with:
SSL encryption
Secure Shell version 2
Advanced Encryption Standard (AES) and Triple Data Encryption Standard (3DES)
on browser, CLP and XML scripting interface
AES and RC4 encryption of video
External USB port enable/disable
Network server mode
Serial interface control
TPM (Trusted Platform Module) 1.2 option
Advanced Encryption Standard (AES)
Intel® Advanced Encryption Standard-New Instructions (AES-NI)
FIPS 140-2 Level-2 certification pending
Memory
Advanced ECC uses single device data correction (SDDC) to detect and correct single and
all multi-bit error that occurs within a single DRAM chip. Both x4 and x8 SDDC are
supported (x8 requires lockstep mode).
Memory online spare mode (also known as rank spare mode) detects a rank that is
degrading and switches operation to the spare rank.
Memory demand and patrol scrubbing to prevent accumulation of correctable errors and
reducing the likelihood of unplanned downtime.
Failed DIMM isolation improves the service time thus improving the overall system
availability.
Address parity protection available on RDIMMs and LRDIMMs detects address bit errors to
improve service time and overall system availability.
Mezzanine options and I/O
Support for one (1) FlexibleLOM, providing two (2) (i.e. redundant) Ethernet ports
Multiple mezzanine I/O expansion slots that support a wide variety of mezzanine cards
each supporting multiple data paths routed to redundant interconnect modules.
Network Adapter Teaming (bonding) provides network fault tolerance, transmit load
balancing, and switch-assisted load balancing.
Storage
Two (2) Small Form Factor hot-plug SAS/SATA HDD or SSD drive bays.
Choice of the HP Smart Array P244br Controller with 1GB FBWC/HP, Smart HBA H244br,
or the HP B140i (chipset SATA). RAID 0 and 1 support for all three storage controller
offerings.
Optional dual-port Fibre Channel mezzanine card(s) for redundant SAN connections.
Processor/Chipset
Processor internal sensors & thermal control protection against over-temperature
conditions.
Cache parity/ECC protects cache data from accidental data corruption.
Machine Check Architecture (MCA) detects and captures hardware errors such as system
bus, memory ECC, parity, and cache, and improves service time.
Intel® QPI Protocol Protection allows detection of data errors using a checksum of 8-bits.
Core Disable for FRB (fault resilient boot) allows a system to power-on despite a failing
core-pair. It uses BIST (built-in self-test) results to detect a failure and disables the target
core-pair upon subsequent boot.
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 9
QuickSpecs
Standard Features
Server Blade Enclosure Infrastructure
Pooled power for true N+N power redundancy through up to six (6) hot-plug, highefficiency, common slot enclosure-based power supplies (configuration dependent).
Up to ten (10) enclosure-based hot-plug HP Active Cool fans that scale to meet future
demands, optimize airflow, reduce power draw, and improve acoustic performance.
Dual grid power providing redundant rack enclosure power feeds to the server blade
enclosure.
HP Dynamic Power Saver Mode monitors the total enclosure power consumption in real
time and automatically adjusts with change in demand for improved efficiency and
reliability.HP Dynamic Power Capping safely limits power usage without impacting
performance by capping peak usage instead of average power usage, removes risk to
electrical infrastructure with a fast-acting, hardware-based capping algorithm, and reclaims
more power by dynamically controlling power limits based on workload demand.
Up to eight interconnect modules per server blade enclosure providing four simultaneous
redundant fabrics for FlexFabric, Virtual Connect Ethernet, Fibre Channel, InfiniBand, Pass
Thru Ethernet, etc.
Enclosure crosslinks between adjacent enclosures to provide interconnect module-tomodule connections or as Virtual Connect module stacking links.
Optional enclosure redundant Onboard Administrator system management module.
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
Warranty
This product is covered by a global limited warranty and supported by HP Services and a
worldwide network of HP Authorized Channel Partners. Hardware diagnostic support and repair is
available for three years from date of purchase. Support for software and initial setup is available
for 90 days from date of purchase. Enhancements to warranty services are available through HP
Care Pack services or customized service agreements. Certain restrictions and exclusions apply.
Hard drives have either a one year or three year warranty; refer to specific hard drive QuickSpecs
for details.
NOTE:
repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts
fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and
labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional
CSR parts are also designed for easy replacement but may involve added complexity. Customers
may choose to have HP replace Optional CSR parts at no charge. Additional information
regarding worldwide limited warranty and technical support is available at
HP Virtual Connect is an interconnect option for c-Class BladeSystem that simplifies server
connectivity to data and storage networks, and reduces costs. Unique HP Flex-10 technology
makes maximum use of network bandwidths, provide dynamic tuning and enable extreme
flexibility to meet individual server and infrastructure requirements by allocating up to 4 network
connections per server port. Virtual Connect FlexFabric modules extend those capabilities to
allocate one function per port to storage connections (FCoE).
HP OneView's software-defined approach to infrastructure management enables central console
to administer network connections and workloads for thousands of servers, see
hp.com/go/oneview
For more information on Virtual Connect Ethernet, Fibre Channel, Converged Network and
management options, see
http://www.hp.com/go/virtualconnect
.
.
Embedded
Management
Server Management
iLO Advanced for
BladeSystem
HP Insight Control
HP OneView
HP Matrix Operating
Environment
HP iLO Advanced for BladeSystem licenses offer smart remote
functionality without compromise, for all HP ProLiant servers. The
license includes the full integrated remote console, virtual keyboard,
video, and mouse (KVM), multi-user collaboration, console record and
replay, and GUI-based and scripted virtual media and virtual folders.
You can also activate the enhanced security and power management
functionality. Learn more about HP iLO Advanced at
www.hp.com/go/iloadvanced
HP Insight Control, lets you deploy, migrate, monitor, remote control,
and optimize your IT infrastructure through a single, simple
management console. For more information, see
http://www.hp.com/go/insightcontrol
Powerful converged management of servers, storage, and network for
IT service automation and infrastructure simplicity, see
www.hp.com/go/oneview
The HP Matrix Operating Environment (Matrix OE) for ProLiant and
Integrity servers is an integrated command center that helps you
instantly adjust to dynamic business demands. This advanced
infrastructure management software lets you reduce the cost of
common data center tasks by up to 40 percent while keeping pace with
your changing business. The HP Matrix OE includes the automated
provisioning, optimization, and recovery management capabilities for
HP CloudSystem Matrix, the ideal platform for private cloud and
Infrastructure as a Service (IaaS).
NOTE:
For more information, visit:
.
http://www.hp.com/go/matrixoe
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 11
QuickSpecs
Optional Features
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
High Performance
Clusters
Storage Software
HP Insight Cluster
Management Utility
(CMU)
HP Cluster Platforms
HP HPC Interconnects
Whether you need to solve a specific data protection, archiving, or storage command and control
challenge, or deliver on strategic consolidation, compliance, or continuity initiatives, look no
further than HP storage software. Our storage software helps you reduce costs, simplify storage
infrastructure, protect vital assets and respond faster to business opportunities.
HP Insight Cluster Management Utility is a Hyperscale management
framework that includes software for the centralized provisioning,
management and monitoring of nodes and infrastructure. Learn more at
www.hp.com/go/cmu
HP Cluster Platforms are specifically engineered, factory-integrated
large-scale ProLiant clusters optimized for High Performance
Computing, with a choice of servers, networks and software. Operating
system options include specially priced offerings for Red Hat Enterprise
Linux and SUSE Linux Enterprise Server, as well as Microsoft Windows
HPC Server. A Cluster Platform Configurator simplifies ordering.
http://www.hp.com/go/clusters
High Performance Computing (HPC) interconnect technologies are
available for this server as part of the HP Cluster Platform portfolio.
These high-speed InfiniBand and Gigabit interconnects are fully
supported by HP when integrated within an HP cluster. Flexible,
validated solutions can be defined with the help of configuration tools.
Whether you're a large enterprise or a smaller business, HP data protection and recovery
software will cost-effectively protect you against disaster and ensure business continuity.
Data Archive and Migration Software
HP's storage software enables you to comply with data retention and retrieval requirements,
improve application performance, and reduce costs by efficiently migrating infrequently
accessed or less valuable data to lower cost storage.
Storage Resource Management Software (SRM)
HP's storage resource management software reduces operational costs and provides the
command and control foundation you need to efficiently manage and visualize your physical
and virtual environments.
Data Replication Software
HP offers array-based and host-based replication software for use in disaster recovery,
testing, application development and reporting.
Storage Device Management Software
Maximize your investment in HP storage and networking with software that enables
hardware-specific configuration, performance tuning and connectivity management.
HP StoreVirtual VSA
HP StoreVirtual VSA allows you to create fully featured shared storage on a VMware
vSphere or Microsoft Hyper-V virtualized server. This server model starting November
2013, includes a limited license for HP StoreVirtual VSA software with 1TB of capacity. To
download the license key and StoreVirtual VSA software, visit: www.hp.com/go/unlockVSA.
NOTE:
Fully functional, capacity-based licenses are available in 4TB, 10T and 50TB sizes. For
more information and access to the 60-day free trial, visit:
You will need your server serial number in order to complete the registration form.
www.hp.com/go/tryVSA
NOTE:
www.hp.com/go/storage/software
For more information available Storage Software including QuickSpecs, please see:
.
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 12
QuickSpecs
Optional Features
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
HP Insight Online
Get connected to HP
Expansion Blade
Support
Factory Express
Portfolio for Servers
and Storage
HP Insight Online is part of the HP Support Center for one stop, secure access to product and HP
support information personalized to your IT environment. Insight Online can automatically display
devices remotely monitored by HP Remote Support tools. With Insight Online's easy navigation
you can efficiently track your IT support contracts and device status from anywhere and at any
time.
http://www.hp.com/go/insightonline
To get the most from your investment in HP Servers, get connected to HP using our innovative
remote support technology which provides system health monitoring, pre-failure alert notification
and more. For details, visit
Supports one (1) optional tape blade.
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Customers can choose how their factory solutions are built,
tested, integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading,
asset tagging, and custom packaging. HP products supported through Factory Express include a
wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP
BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape
libraries and configurable network switches.
www.hp.com/services/getconnected
HP Simple
Configurator
For more information on Factory Express services on your specific server model please contact
your sales representative or go to:
SCE is a guided self-service tool to help sales and non-technical people provide customers with
initial configurations in 3 to 5 minutes. You may then send the configuration on for configuration
help, or use in your existing ordering processes. If you require "custom" rack configuration or
configuration for products not available in SCE, please contact HP's Customer Business Center
or an Authorized Partner for assistance.
http://www.hp.com/go/factory-express.html
http://www.hp.com/products/configurator
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 13
QuickSpecs
Recommended Support Services for BL460
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
Service and Support
Optimized Support
recommendation
HP Technology Services for BladeSystem
HP Technology Services delivers confidence, reduces risk and helps customers realize agility and
stability. Connect to HP to help prevent problems and solve issues faster. Our support technology
lets you to tap into the knowledge of millions of devices and thousands of experts to stay
informed and in control, anywhere, any time.
Protect your business beyond warranty with HP Care Pack Services
HP Care Pack Services enable you to order the right service level, length of coverage and
response time as you purchase your new server, giving you full entitlement for the term you
select.
HP Proactive Care Advanced
Achieve a higher return on your product investment with the personal attention from a locally
assigned Account Support Manager who delivers recommendations designed to improve
availability and performance. Leverage your system's ability to connect to HP for automated
problem detection and rapid critical event management to increase stability and reduce
unplanned downtime. This recommendation provides 24x7 coverage with four-hour response for
hardware and two-hour callback for supported software. Collaborative call management comes
with Proactive Care Advanced or you may choose full support from HP where we own all cases
through to resolution. HP is a leading provider of support services for most operating systems
used on HP BladeSystem with long, successful partnerships with vendors such as Microsoft, Red
Hat, VMware, SUSE and others. Purchasing software support from HP simplifies troubleshooting
and shortens time to resolution with one call for hardware or software questions.
This easy-to-buy, easy-to-use HP Care Pack service helps ensure your new HP BladeSystem
hardware is installed smoothly, efficiently and with minimal disruption to your IT and business
operations.
www.hp.com/services/bladesystemservices
HP Proactive Care
This service helps prevent problems and stabilize IT by utilizing secure, real-time, predictive
analytics and proactive consultations when your products are connected to HP. It combines three
years' proactive reporting and advice with 24x7 four hour response coverage and enhanced
escalation management. It also includes collaborative call management with two hour call back
on software questions to reduce troubleshooting on hardware and industry leading software.
Choose HP Technology Services Consulting to modernize and migrate your key systems. These
services help fine tune your data center to improve security, management and efficiency across
IT infrastructure, operations, and facilities and prepare you for the new style of IT. HP
understands the needs of the data center of the future and will serve as your guide for the
journey.
- 24x7 coverage, three year Care Pack Service
www.hp.com/services/consulting
Data Privacy Services
Protect your data through better media management. HP Data privacy services help manage and
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 14
QuickSpecs
Recommended Support Services for BL460
protect sensitive data to reduce the risk of unauthorized access to private information and help
meet compliance requirements. Our retention services allow you to keep drives and other devices
upon failure with Defective Media Retention and Comprehensive Defective Material Retention,
our removal services provide convenient data sanitization and our recovery services allow you to
safely retire IT assets and capture any remaining value from the hardware.
www.hp.com/services/dataprivacy
Factory Express for Servers and storage
HP Factory Express offers configuration, customization, integration and deployment services for
HP servers and storage products. Choose how your factory solutions are built, tested, integrated,
shipped and deployed.
http://www.hp.com/go/factory-express
Additional hardware Installation services for HP BladeSystem
In addition to hardware installation of your Blade server, HP offers installation and startup
services for your BladeSystem and Network infrastructure.
www.hp.com/services/bladesystemservices
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
HP Foundation Care
HP Foundation Care provides hardware and software support, enabling faster resolution of
problems on HP and third party products. Standard service levels have been simplified, making it
even easier for you to determine the right level of coverage for your SLA and budgetary
requirements.
www.hp.com/services/foundationcare
Parts and Materials
NOTE:
Factory Integrated Models" section.
NOTE:
options section of this QuickSpecs.
NOTE:
shipped separately.
NOTE:
this QuickSpecs.
NOTE:
NOTE:
For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information -
Pre-configured models ship with the configurations below. Options can be selected from the Core or Additional
HP does not allow factory integration of options into pre-configured models. Any additional options purchased will be
If you desire a custom configuration please see "Configuration Information - Factory Integrated Models" section of
All Pre-configured Models come populated with some hard drive blanks installed.
Not all models are available in all regions. Check with your local country HP offices for availability.
HP will provide HP-supported replacement parts and materials necessary to maintain the covered
hardware product in operating condition, including parts and materials for available and
recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum
usage limitations as set forth in the manufacturer's operating manual, product quick-specs, or the
technical product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash
Drives replaced by HP due to malfunction.
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 15
QuickSpecs
Models
E5-2600 v3 series Processors
HP ProLiant BL460c
Gen9 E5-2609 v3 1P
16GB-R H244br Server
128GB (4x 32GB) PC4-2133P-L (DDR4-2133) Registered DIMMs at 1.
2V)
NOTE:
processor.
HP FlexFabric 20Gb 2-port 650FLB FlexibleLOM
Smart Array P244br Controller with 1GB FBWC RAID 0,1
None ship standard
Supports up to two (2) HP hot-plug SFF SAS/SATA/SDD drives
SAS: 2.4TB; SATA: 2.0TB; SAS SSD: 3.2TB; SATA SSD: 1.6TB
None
2 standard - Slot 1 supports Type A mezzanine Cards. Slot 2 supports
Type A and Type B mezzanine cards.
HP iLO Management (standard)
Optional: HP OneView or HP Insight Control
Up to eight (8) half-height blades supported in the HP BladeSystem
c3000 Enclosure
Up to sixteen (16) half-height blades supported in HP BladeSystem
c7000 Enclosure
Server warranty includes 3-year3-year Parts, 3-year Labor, 3-year onsite support.
Total of 16 DIMM slots. Only eight (8) usable with single
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 18
HP ProLiant BL460c Generation 9 (Gen9) Server
QuickSpecs
Configuration Information - Factory Integrated Models
Blade
NOTE:
server). To ensure only valid configurations are ordered, HP recommends the use of an HP approved configurator. Contact
your local sales representative for information on CTO product offerings and requirements.
NOTE:
NOTE:
NOTE:
drives ordered with the server.
This section lists some of the steps required to configure a Factory Integrated Model (configure-to-order or CTO
Configure-to-order server blades must start with a CTO Blade Server.
FIO indicates that this option is only available as a factory installable option.
All Factory Integrated Models will be populated with sufficient hard drive blanks based on the number of initial hard
Step 1: Base Server Blade Configuration (Select a configurable Blade)
Models
HP ProLiant BL460c Gen9 E5-v3 10Gb/20Gb FlexibleLOM Configure-to-order
Blade Server
Configurable Models ship with:
One (1) FlexibleLOM connector providing a choice for one (1) of the supported
10Gb/20Gb FlexibleLOMs (see Step 2)
Two (2) HP small form factor hot-plug SAS/SATA/ HDD or SSD hard drive bays
Two (2) x16 PCIe I/O expansion slots (one Type A, one Type A/B)
One (1) integrated USB connector and one (1) MicroSDHC connector
One (1) TPM connector
HP iLO Management (standard)
727021-B21
Step 2: Choose Required Options (one of the following from each list unless
otherwise noted)
HP Processors
NOTE:
processor.
NOTE:
one xxxxxx-B21 in Step 4.
E5-2600 v3 series Processors
HP BL460c Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2623v3 (3GHz/4-core/10MB/105W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2685v3 (2.6GHz/12-core/30MB/120W) FIO
Processor Kit
All configure-to-order processor kits (i.e. xxxxxx-L21) contain one (1)
If two processors are desired, select one xxxxxx-L21 here in Step 2 and
726987-L21
726988-L21
726989-L21
726990-L21
726991-L21
726992-L21
726993-L21
726994-L21
726995-L21
726996-L21
726997-L21
726998-L21
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 19
HP ProLiant BL460c Generation 9 (Gen9) Server
QuickSpecs
Configuration Information - Factory Integrated Models
Blade
HP Memory
HP BL460c Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/135W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W) FIO
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W) FIO
Processor Kit
NOTE:
E5-2697 v3, the E5-2643 v3, the E5-2637 v3, or the E5-2667 v3 is used. In a 2
processor configuration, there are twelve (12) total available DIMM slots.
NOTE:
above, please reference the 'Memory Speed by Processor Model' table in the
Memory section of the QuickSpecs.
NOTE:
Technology.
NOTE:
Turbo Boost Technology. The frequency boost increment is dependent on the
processor SKU and the number of active cores. In general, a higher boost
increment is obtained when fewer cores are active.
NOTE:
memory speed may depend on the quantity and type of DIMMs installed.
NOTE:
supported.
NOTE:
model number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of
CPUs in a Node, 6 is socket/segment designation, 00 = Processor SKU, and x =
L for low power SKUs.
NOTE:
processor must be installed in processor slot 1 for access to the first mezzanine
expansion slot (expansion slot 1). A processor must be installed in processor
slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE:
NOTE:
Technologies except the E5-2603 v3 and E5-2609 v3.
NOTE:
wattage.
NOTE:
the maximum speed memory can operate. Please see the see the "Memory"
section later in this document.
NOTE:
with this server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document
DIMM slots 4 and 5 are not accessible when either the E5-2699 v3, the
For the maximum supported memory speeds for each processor listed
HT indicates that the processor model supports Intel® Hyper-Threading
Turbo indicates the maximum potential frequency when using Intel®
DDR4 speed is the maximum memory speed of the processor. Actual
Supports 1 or 2 processors. Mixing different processor models is not
For the Intel® C610 Chipset E5-2600 v3 Series, the letter preceding the
The BL460c Gen9 includes two I/O mezzanine expansion slots. A
All processors within the server must be identical.
All processors support Intel® Hyper-Threading and Intel® Turbo Boost
The letter "L" following the model number indicates denotes lower
The processor model as well as the memory configuration determines
HP memory from previous generation servers (DDR3) is not compatible
726999-L21
727000-L21
727001-L21
727002-L21
727003-L21
765268-L21
767049-L21
773123-L21
773124-L21
779795-L21
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 20
HP ProLiant BL460c Generation 9 (Gen9) Server
QuickSpecs
Configuration Information - Factory Integrated Models
for Gen9. For additional information, please see the HP SmartMemory
QuickSpecs at:
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle Single
Server FIO License
NOTE:
The HP Smart Array P220i Controller FIO Kit (690164-B21) comes
included with the HP ProLiant BL460c Gen8 10Gb FlexibleLOM Configure-toorder Blade Server (641016-B21). However when choosing the HP ProLiant
BL460c Gen8 E5-v2 10Gb FlexibleLOM Configure-to-order Blade Server
(735151-B21), the HP Smart Array P220i Controller FIO Kit (690164-B21) must
be added separately as part of the Server Blade Configuration Process.
HP OneView with iLO Advanced - Server hardware required on same
purchase order
HP OneView incl 3yr 24x7 Supp Bundle 1 Svr E-LTU
HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle Physical 1 Svr Lic
HP OneView for Blade Server incl 3yr 24x7 Supp FIO Bundle 1 Svr E-LTU
HP Smart Array P244br Controller FIO Kit
HP H244brSmart HBA Controller
HP FIO B140i RAID Enable Kit - BIOS Setting
NOTE:
The HP Smart Array B140i Controller (chipset SATA) comes standard
with the HP BL460c Gen9 10Gb/20Gb FLB CTO Blade (727021-B21). If neither
the HP Smart Array P244br nor the HP H244br controllers are chosen, a SATA
cable will be provided to support SATA devices for the two internal drives. If
RAID is required when using the B140i, please choose 'HP FIO B140i RAID
Enable Kit - BIOS Setting' (784308-B21).
Blade
C6N36A
E5Y43AAE
F6Q89A
F6Q89AAE
761871-B21
761878-B21
784308-B21
Step 4: Choose Additional Options for Factory Integration
NOTE:
For additional options, please refer to the "Core Options" and "Additional Options" section below. For additional
options, including server blade enclosures interconnect, mezzanine options and power subsystem options; please see the
Core Options and Additional sections below; or the following:
supported in the new enclosures and any future server blades will be supported in the existing enclosures.
HP BladeSystem c-Class Interconnect and Mezzanine Components:
configured with 10 fans and the c3000 enclosure to be configured with 6 fans.
The c3000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
The c7000 HP c-Class enclosures have full backwards and forwards compatibility, existing server blades are
and
For optimal cooling and system performance the BL460c Gen9 Server Blade requires the c7000 enclosure to be
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 22
QuickSpecs
Core Options
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
HP Networking
NOTE:
when connected to an interconnect module with 10Gb Ethernet downlinks.
NOTE:
connected to an interconnect module with 1Gb Ethernet downlinks.
NOTE: The 10 Gigabit Ethernet adapters on each server blade connect to a
10Gb interconnect in bays 3-6 (HP BladeSystem c7000 Enclosure) or bays 2-4
(HP BladeSystem c3000 Enclosure).
FlexibleLOM connectors and is already included in the pre-configured models.
However, it must be added in Step 2 for Configure-to-Order Models. The
FlexibleLOM options below are used to change these original FlexibleLOMs.
20Gb FlexibleLOM Adapters
HP FlexFabric 20Gb 2-port 630FLB Adapter
NOTE:
information at
docname=c04312719
HP FlexFabric 20Gb 2-port 650FLB Adapter
NOTE:
information at
docname=c04347341
A 10 Gigabit Ethernet adapter supports linking at 1Gbps or 10Gbps
A 10 Gigabit Ethernet adapter supports linking at only 1Gbps when
700076-B21
Please see QuickSpecs for technical specifications and additional
http://www8.hp.com/h20195/v2/GetDocument.aspx?
700767-B21
Please see QuickSpecs for technical specifications and additional
http://www8.hp.com/h20195/v2/GetDocument.aspx?
700748-B21
Please see QuickSpecs for technical specifications and additional
665246-B21
Please see QuickSpecs for technical specifications and additional
.
718935-B21
Please see QuickSpecs for technical specifications and additional
http://www8.hp.com/h20195/v2/GetDocument.aspx?
615729-B21
Please see QuickSpecs for technical specifications and additional
The server supports one (1) FlexibleLOM that is installed in the
700065-B21
Please see QuickSpecs for technical specifications and additional
http://www8.hp.com/h20195/v2/GetDocument.aspx?
700763-B21
Please see QuickSpecs for technical specifications and additional
http://www8.hp.com/h20195/v2/GetDocument.aspx?
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Please see QuickSpecs for technical specifications and additional
http://www8.hp.com/h20195/v2/GetDocument.aspx?
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
718203-B21
710608-B21
726987-B21
726988-B21
726989-B21
726990-B21
Page 24
QuickSpecs
Core Options
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
HP BL460c Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2623v3 (3GHz/4-core/10MB/105W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2685v3 (2.6GHz/12-core/30MB/120W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2630Lv3 (1.8GHz/8-core/20MB/55W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/135W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W)
Processor Kit
HP BL460c Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W)
Processor Kit
NOTE:
E5-2697 v3, the E5-2643 v3, the E5-2637 v3, or the E5-2667 v3 is used. In a 2
processor configuration, there are twelve (12) total available DIMM slots.
NOTE:
above, please reference the 'Memory Speed by Processor Model' table in the
Memory section of the QuickSpecs.
NOTE:
Technology.
NOTE:
Turbo Boost Technology. The frequency boost increment is dependent on the
processor SKU and the number of active cores. In general, a higher boost
increment is obtained when fewer cores are active.
NOTE:
memory speed may depend on the quantity and type of DIMMs installed.
NOTE:
supported.
NOTE:
DIMM slots 4 and 5 are not accessible when either the E5-2699 v3, the
For the maximum supported memory speeds for each processor listed
HT indicates that the processor model supports Intel® Hyper-Threading
Turbo indicates the maximum potential frequency when using Intel®
DDR4 speed is the maximum memory speed of the processor. Actual
Supports 1 or 2 processors. Mixing different processor models is not
For the Intel® C610 Chipset E5-2600 v3 Series, the letter preceding the
726991-B21
726992-B21
726993-B21
726994-B21
726995-B21
726996-B21
726997-B21
726998-B21
726999-B21
727000-B21
727001-B21
727002-B21
727003-B21
765268-B21
767049-B21
773123-B21
773124-B21
779795-B21
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 25
QuickSpecs
Core Options
model number indicates the Product Line (E3, E5, E7); 2600x, 2 = number of
CPUs in a Node, 6 is socket/segment designation, 00 = Processor SKU, and x =
L for low power SKUs.
NOTE: The BL460c Gen9 includes two I/O mezzanine expansion slots. A
processor must be installed in processor slot 1 for access to the first mezzanine
expansion slot (expansion slot 1). A processor must be installed in processor
slot 2 for access to the second mezzanine expansion slot (expansion slot 2).
NOTE:
NOTE:
Technologies except the E5-2603 v3 and E5-2609 v3.
NOTE:
wattage.
NOTE:
the maximum speed memory can operate. Please see the see the "Memory"
section later in this document.
All processors within the server must be identical.
All processors support Intel® Hyper-Threading and Intel® Turbo Boost
The letter "L" following the model number indicates denotes lower
The processor model as well as the memory configuration determines
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
HP Memory
NOTE:
with this server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document
for Gen9. For additional information, please see the HP SmartMemory
QuickSpecs at:
docname=c04111535
NOTE:
mixed within a server.
NOTE:
memory speed may run at 2133MHz, 1866MHz, or 1600MHz. Please see
Memory Population Table or the Online Memory Configuration Tool at:
http://h22195.www2.hp.com/MemoryTool/Home/Legal
HP SmartMemory
Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors
HP 8GB (1x8GB) Single Rank x4 PC4-2133P-R (DDR4-2133) Registered
HP 16GB (1x16GB) Dual Rank x4 PC4-2133P-R (DDR4-2133) Registered
Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors
HP 32GB (1x32GB) Quad Rank x4 PC4-2133P-L (DDR4-2133) Load Reduced
NOTE:
memory may operate at a lower speed. Please see the see the "Memory"
section later in this document and the Online Memory Configuration Tool for
details at
http://h22195.www2.hp.com/MemoryTool/Home/Legal
HP memory from previous generation servers (DDR3) is not compatible
http://www8.hp.com/h20195/v2/GetHTML.aspx?
LRDIMM and RDIMM are distinct memory technologies and cannot be
Depending on the memory configuration and processor model, the
Depending on the memory configuration and processor model, 2133MHz
.
726718-B21
726719-B21
726722-B21
HP Hard Drives
NOTE:
factor (SFF) SmartDrive carrier for enhanced management and reduced
maintenance errors. HP drives from generation G7 servers and before are not
compatible with the BL460c Gen9 drive bays.
NOTE:
server, but limits the RAID configuration to two separate RAID 0 volumes. Mixing
of other drives types is not supported.
NOTE:
specific hard drive QuickSpecs for details.
NOTE:
model.
6G SATA Hot Plug with SmartDrive SFF (2.5-inch) Midline (MDL) Drives
HP 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive
The ProLiant BL460c Gen9 server includes the HP hot-plug small form
The mixing of standard SAS drives with SAS SSD is supported within the
HP hard drives have either a one year or three year warranty; refer to the
The hard drive options are not required when configuring a drive-less
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
655710-B21
Page 26
QuickSpecs
Core Options
NOTE:
Please see the QuickSpecs for technical specifications and additional
information at
The mixing of standard SAS drives with SAS SSD is supported within the
Please see the QuickSpecs for technical specifications and information
.
717973-B21
739898-B21
717971-B21
739888-B21
717969-B21
691868-B21
691866-B21
691864-B21
691862-B21
756636-B21
762263-B21
762261-B21
759208-B21
759210-B21
759212-B21
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 28
QuickSpecs
Additional Options
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
HP Insight software
HP Insight Control
HP Insight Control including 1yr 24x7 Technical Support and Updates Single
Server License
HP Insight Control including 1yr 24x7 Technical Support and Updates Electronic
License
HP Insight Control including 1yr 24x7 Support ProLiant ML/DL/BL-bundle FIO
Electronic License
HP Insight Control Server Provisioning Media Kit
HP Insight Management Media Kit
NOTE:
Contains HP Systems Insight Manager, HP Insight Control, HP Matrix Operating
Environment, and Virtual Connect Enterprise Manager software. Uses an
integrated installer to perform quick and accurate software installation and
updates.
NOTE:
multiple licenses with a single activation key.
NOTE:
redeemed online or via fax in order to obtain the license activation key(s).
Includes one year of 24 x 7 HP Software Technical Support Service.
HP Insight Management Media Kit contains DVDs without licenses.
Electronic and Flexible-Quantity licenses can be used to purchase
Customer will receive a license entitlement certificate, which must be
Licenses ship without media. The HP Insight Management Media Kit can
For additional license kits, please see the QuickSpecs at:
C6N27A
C6N28ABE
C6N36ABE
BD883A
C6N31A
HP iLO Advanced
License
HP Integrated Lights-Out (iLO) Advanced for ProLiant BladeSystem Remote
Management
HP iLO Advanced for BladeSystem including 3yr 24x7 Technical Support and
Updates E-LTU
HP iLO Advanced Blade 1 Server License with 3yr 24x7 Tech Support and
Updates
HP iLO Advanced for BladeSystem including 1yr 24x7 Technical Support and
Updates E-LTU
HP iLO Advanced for BladeSystem including 1yr 24x7 Support Single Server
License
NOTE:
redeemed online or via fax in order to obtain the license activation key(s).
Includes one or three years of 24 x 7 HP Software Technical Support Service.
NOTE:
see the iLO QuickSpecs at
NOTE:
redeemed online or via fax in order to obtain the license activation key(s).
Includes one or three year of 24 x 7 HP Software Technical Support Service.
HP Insight Cluster Management Utility 1yr 24x7 Flexible License
HP Insight Cluster Management Utility 3yr 24x7 Flexible License
NOTE:
licenses and support with a single activation key. Each license is for one node
(server). Customer will receive a printed end user license agreement and license
entitlement certificate via physical shipment. The license entitlement certificate
must be redeemed online in order to obtain a license key. Customer also will
receive a support agreement.
These part numbers can be used to purchase one certificate for multiple
For additional license kits please see the QuickSpecs at
.
.
E5Y34A
E5Y35AAE
E5Y37A
E5Y38A
E5Y39AAE
QL803B
BD476A
BD477A
HP Security
HP Storage Controllers
HP Trusted Platform Module Option
NOTE:
securely store artifacts used to authenticate the server platform. These artifacts
can include passwords, certificates and encryption keys. Windows® BitLocker™
Drive Encryption (BitLocker) is a data protection feature available in Windows
Server® 2008. BitLocker leverages the enhanced security capabilities of a
Trusted Platform Module (TPM) version 1.2. The TPM works with BitLocker to
help protect user data and to ensure that a server running Windows Server 2008
has not been tampered with while the system was offline.
NOTE:
http://www.hp.com/go/TPM
NOTE:
TPM deployment.
NOTE:
retained. Misplacing or losing the key could result in data loss.
HP Smart Array P244br/1GB FBWC 12Gb 2-ports Int SAS Controller
HP H244br 12Gb 2-ports Int Smart Host Bus Adapter
The TPM (Trusted Platform Module) is a microcontroller chip that can
For more information about TPM, including a white paper, go to
.
ProLiant OS pre-installed units will come with the partition required for
The TPM key is unique to every TPM deployed server and must be
488069-B21
749680-B21
726809-B21
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 30
QuickSpecs
Additional Options
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
HP Secure Encryption
HP InfiniBand
Mezzanines
HP Secure Encryption No Media E-LTU per Drive
HP Secure Encryption No Media Flexible License per Drive
NOTE:
H244br (running in RAID mode) as an option. HP Secure Encryption licensing is
based on the number of physical drives requiring encryption.
NOTE:
www.hp.com/go/hpsecureencryption
NOTE:
active (regardless of operating mode). When installed in any other mezzanine
slot, both ports are active.
NOTE:
BladeSystem c7000 Enclosure. For additional information, please see the HP
BladeSystem c7000 Enclosure and InfiniBand QuickSpecs at:
HP Infiniband QDR/Ethernet 10Gb 2-port 544M Adapter
NOTE:
the server.
HP Infiniband FDR/Ethernet 10Gb/40Gb 2-port 544M Adapter
NOTE:
FDR mode and may be installed in any mezzanine slot if operated in any other
mode.
The FDR InfiniBand adapter must be installed in mezzanine slot 1 for FDR mode
and may be installed in any mezzanine slot if operated in any other mode.
HP Secure Encryption is supported on the HP Smart Array P244br and
For more information about HP Secure Encryption, go to
.
an InfiniBand adapter is installed in mezzanine slot 1, only one port is
InfiniBand QDR and FDR speeds are only supported on the HP
The QDR InfiniBand adapter may be installed in any mezzanine slot of
The FDR InfiniBand adapter must be installed in mezzanine slot 1 for
D8S85AAE
D8S84A
644160-B21
644161-B22
702213-B21
HP Flash Media Kits
for USB Drives
HP Flash Media Kits for USB Drives
HP Enterprise Mainstream Flash Media Kits for Memory Cards
HP 8GB USB Enterprise Mainstream Flash Media Drive Key Kit
HP 8GB microSD Enterprise Mainstream Flash Media Kit
HP 32GB microSD Enterprise Mainstream Flash Media Kit
NOTE:
Please see the QuickSpecs for Technical Specifications and additional
information:
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 31
QuickSpecs
Additional Options
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
HP Care Pack Services
Proactive Care
on shore/near shore Advanced Solution Center (ASC) and backed by the global
delivery organization, end-to-end case ownership from a Technical Solution
Specialists and Technical Account Manager who remotely delivers
firmware/software revision management, proactive scans and incident trend
reports. Recommended for customers running a virtualized infrastructure and/or
customers who desire an enhanced call support experience.
HP 3 year 4 hour 24x7 ProLiant BL4xxc Proactive Care Service
HP 3 year 4 hour 24x7 with Defective Media Retention ProLiant BL4xxc
Proactive Care Service
HP 3 year 6 hour Call To Repair 24x7 ProLiant BL4xxc Proactive Care Service
HP 3 year 6hr Call To Repair 24x7 with Defective Media Retention ProLiant
BL4xxc Proactive Care SVC
Proactive Care Personalized Support Environmental Option - to add an onsite
Account Support Manager (ASM) to Proactive Care. ASM is an assigned
resource who delivers support planning and brings technical expertise and best
practices advice for the customer's environment.
HP 3 year ISS ProactiveCare Personalized Support
Installation Services
running and help minimize disruptions to your business.
HP Install c-Class Server Blade Service
HP Hardware Installation during Non Standard Hours c-Class Server Blade
Service
Additional HP Care Pack services can be found at:
- Collaborative Support plus Proactive services delivered by the
- reduce the time required to get your system up and
http://www.hp.com/go/cpc
U3B14E
U3B17E
U3B20E
U3B23E
U6W98E
UE493E
UG869E
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 32
HP ProLiant BL460c Generation 9 (Gen9) Server
QuickSpecs
Blade
Memory
For detailed memory configuration rules and guidelines, please use the Online DDR4 Memory Configuration Tool:
http://h22195.www2.hp.com/MemoryTool/Home/Legal
Memory Subsystem Architecture
Each Intel® Xeon® E5-2600 v3 family or Intel® Xeon® E5-2600 v3 family processor socket contains four memory channels
that support two DIMMs each for a total of eight (8) DIMM per installed processor or a grand total of sixteen (16) DIMMs for
the server. Up to 32GB capacity DIMMs are supported for 512GB of memory (16 DIMM slots x 32GB per DIMM).
Memory Population Rules and Guidelines:
A minimum of one DIMM is required per processor.
Install DIMMs only if the corresponding processor is installed.
If only one processor is installed in a two processor system, only half of the DIMM slots are available.
DIMM sizes can be mixed in channel. To maximize performance, it is recommended to balance the total memory
capacity between all installed processors and to load the channels similarly whenever possible.
LRDIMM and RDIMMs are all distinct memory technologies and cannot be mixed within a server. The majority of
ProLiant Gen9 servers support RDIMM and LRDIMM.
DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.
The maximum memory speed is a function of the memory type, memory configuration, and processor model.
The maximum memory capacity is a function of the memory type and number of installed processors.
HP memory from previous generation servers is not compatible with the BL460c Gen9 Server Blade.
To realize the performance memory capabilities listed in this document, HP SmartMemory is required. For additional
information, please see the HP SmartMemory QuickSpecs at:
docname=c04111535
For memory population rules and additional memory guidelines, please see the BL460c Gen9 user guide at
http://www.hp.com/support
.
http://www8.hp.com/h20195/v2/GetHTML.aspx?
Supported Memory Bandwidth on Intel® Xeon® E5-2600 v3 series Processors
DIMM Rank
DIMM Capacity
Voltage
12 slot servers
16 slot servers
12 slot servers
16 slot servers
1 DIMM Per Channel
2 DIMM Per Channel
*Maximum Capacity will vary based on individual serve platform qualification schedule
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 34
QuickSpecs
Memory
Item
Description
1
Capacity
2
Rank
3
Data width
4
Memory generation
5
Max. Memory speed
6
CasLatency
6
DIMM type
Following are memory options available from HP:
HP Memory
NOTE:
with this server. HP SmartMemory is required to realize the memory
performance improvements and enhanced functionality listed in this document
for Gen9. For additional information, please see the HP SmartMemory
QuickSpecs at:
To review typical system power ratings use the HP Power Advisor which
is available via the online tool located at
www.hp.com/go/hppoweradvisor.
NOTE:
Server Blade requires the c7000 enclosure to be configured with 10
fans and the c3000 enclosure to be configured with 6 fans.
Operating
For optimal cooling and system performance the BL460c Gen9
14.00 lb (6.33 kg)
10.50 lb (4.75 kg)
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1,000 ft) above sea level to a
maximum of 3,050 m (10,000 ft), no direct
sustained sunlight.
Non-operating
Relative Humidity
(non-condensing)
Altitude
Operating
Non-operating
Operating
Maximum rate of change is 10°C/hr (18°F/hr).
The upper limit may be limited by the type and
number of options installed.
System performance may be reduced if
operating with a fan fault or above 30°C
(86°F).
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
10 to 90% relative humidity (Rh), 28°C
(82.4°F) maximum wet bulb temperature, noncondensing.
5 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature,
non-condensing.
3,050 m (10,000 ft). This value may be limited
by the type and number of options installed.
Maximum allowable altitude change rate is
457 m/min (1,500 ft/min).
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 37
QuickSpecs
Technical Specifications
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
HP Smart Array P244br
Controller
Acoustic Noise
Disk Drive Interface
Server Interface
Cache Memory
Logical Drives
Supported
Host Memory
Addressing
RAID Support
Other
Non-operating
For acoustic noise specifications, please see the HP BladeSystem cClass Enclosures QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
Two ports, each at 20Gbps full duplex; 40Gbps aggregate full duplex
theoretical bandwidth
NOTE:
1Gb or 10Gb HP BladeSystem c-Class interconnect components. Both
ports will operate at the same speed.
NOTE:
20Gbps (theoretical) full duplex.
802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4)
and 802.3x
Full hardware offload of iSCSI and FCoE storage protocol processing
for highest performance
converged Ethernet data and storage networks.
Dual-port 10GbE Flex-10 FlexibleLOM network adapter that provides
the flexibility type of LOM to meet growing infrastructure needs
Industry-leading throughput and latency performance
Supports HP's Flex-10 blade interconnect technology
User configurable bandwidth settings when combined with the 10Gb
Flex-10 Virtual Connect
module. From 100Mb/s to10Gb/s on up to four "Physical Function" NICs
per port, in increments of
100Mb/s for NIC. The combined bandwidth of NICs cannot exceed port
bandwidth i.e. 10 Gb.
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration and offloads for stateless TCP/IP, TCP Offload
Engine (TOE)
Improved small packet performance
Support for Preboot eXecution Environment (PXE)
Integrated PHY and MAC
Supports for SR-IOV
Support for Network Partitioning (NPAR)
Each port is autosensing 1Gb/10Gb, and can interoperate with
Each port on the 554FLB adapter transmits from the server at
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 39
QuickSpecs
Technical Specifications
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
HP FlexFabric 20Gb
2-port 650FLB
FlexibleLOM
Type
Network Processor
Data Transfer Method
Network Transfer Rate
IEEE Compliance
Standard Features
Integrated dual-port KR2 20Gb FlexibleLOM with FlexFabric (Flex-20,
FCoE, RoCE, Tunnel Offload with VXLAN/NVGRE, hardware-based
iSCSI, iSCSI boot, TCP/IP offload engine, and autosencing Ethernet
speed capability)
Emulex XE-104
x8 PCI Express 3.0
Two ports, each at 40 Gbps bi-directional; 80 Gbps aggregate bidirectional theoretical bandwidth
Dual 20Gb ports provide up to 80Gb bi-directional per adapter
Multi-speed adapter operates at either 20GbE or 10GbE
Converges FCoE or RoCE with LAN traffic on a single Ethernet wire
Tunnel Offload support for VXLAN and NVGRE
RDMA over Converged Ethernet (RoCE) for greater server efficiency
and lower latency (6125XLG only)
Advanced storage offload processing freeing up valuable CPU cycles
Supports UEFI and legacy boot options
Mixed Storage - supports NIC + FCoE on one port, and NIC + iSCSI on
the other
Concurrent Storage - concurrently supports NIC, FCoE, and iSCSI
storage functions on the same port (NIC + FCoE + iSCSI)
Industry-leading throughput and latency performance
Supports HP's Flex-20 blade interconnect technology
Over eight million small packets/s, ideal for web/mobile applications,
mobile messaging, and social media
User configurable bandwidth settings when combined with the 20Gb
Flex-20 Virtual Connect module. From 100Mb/s to10Gb/s on up to four
"Physical Function" NICs per port, in increments of 100Mb/s for NIC.
The combined bandwidth of NICs cannot exceed port bandwidth i.e. 20
Gb/s.
Greater bandwidth with PCIe 3.0
Jumbo Frames support
Supports Wake On LAN (WOL)
Support for Preboot eXecution Environment (PXE)
Support for Microsoft Windows SMB Direct
Optimized host virtualization density with SR-IOV support
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 40
QuickSpecs
Technical Specifications
HP ProLiant BL460c Generation 9 (Gen9) Server
Blade
Environment-friendly
Products and
Approach
End-of-life
Management and
Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and
recycling programs in many geographic areas. For trade-in information,
please go to:
please go to:
sales office. Products returned to HP will be recycled, recovered or
disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to
provide treatment information for each product type for use by treatment
facilities. This information (product disassembly instructions) is posted
on the Hewlett Packard web site at:
instructions may be used by recyclers and other WEEE treatment
facilities as well as HP OEM customers who integrate and re-sell HP
equipment.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon
Inside are trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 15052 Worldwide QuickSpecs — Version 1 — 9.9.2014
Page 41
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.