Technical Specifications
Model v642k |
PE453AA |
|
Processor & Speed |
2.8 GHz/400 Intel® Pentium® 4 Processor – PGA478 |
|
Chipset |
|
Intel® 848P |
Motherboard |
|
Oxford-UL6E (4PSD-LA) |
RAM |
|
256/3200 MB 400 DDR SDRAM (runs@266) |
Maximum |
|
2 GB (2x1024MB DDR SDRAM) |
Sockets |
|
Two 184-pin DDR DIMMs |
Size |
|
128, 256, 512 AND 1024 MB DDR DIMMs |
Free DIMM Sockets |
One |
|
Pairs Required |
|
No |
Type Supported |
|
JEDEC unbuffered DDR SDRAM DIMM specification |
Cache |
|
8KB Data Cache + Trace Cache L1, 512 KB L2 Integrated |
|
|
on Processor module |
Hard Drive |
|
120 GB (7200 RPM) |
Optical Drive |
|
CD-RW/DVD-ROM Drive 48x32x16x48 |
|
|
48XWrite /32X - Re-write /16x- DVD Read |
|
|
48X - CD-ROM Read |
Average Random Access |
DVD =115ms / CD-ROM =95ms |
|
Transfer Rate |
|
DVD = 21.6/sec. / CD-ROM = 7.2MB/sec. |
Diskette Drive |
|
None |
9 in 1 Card Reader |
Compact Flash I/II, Memory Stick/PRO, MMC/SD, Smart |
|
|
|
Media, xD, Microdrive |
Video Graphics |
AGP 8X Graphics Card |
|
Controller |
|
ATI R9200SE |
Video Memory |
|
128 MB DDR, not upgradeable |
Video Connectors |
Composite & S-Video - NTSC |
|
Network Card |
|
10/100 BaseT, Integrated |
1394 Card |
|
IEEE-1394, Integrated |
Sound |
|
AC’97, 6 Channel, Integrated on MB |
Controller |
|
Realtek ALC650F |
Chassis |
|
Lynx, 220V PSU |
USB Interface Specification |
USB 2.0 |
|
External I/O |
Rear Connectors |
4= USB, 1=1394, Serial, Parallel, |
|
|
Line-In, Line-Out; Microphone |
External I/O |
Front Connectors |
2=USB, 1= 1394, Line In, Microphone, Headphone, 9 in 1 |
|
|
Card Reader w/USB |
Expansion Slots (Total) |
3= PCI, 1=AGP |
|
Expansion Slots (FREE) |
3= PCI |
|
Drive Bays (Total) |
One 5.25” external, One 3.5” external, |
|
|
|
Two 3.5” internal |
Drive Bays (FREE) |
One 3.5” internal |
|
Keyboard/Mouse |
One-touch Enhanced Keyboard, PS/2 Optical scrolling |
|
|
|
mouse |
Copyright Hewlett-Packard Co. 1994-2004
This information is subject to change without notice and is provided "as is" with no warranty.
Hewlett-Packard shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this material.