Page 1
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP Pavilion23 All-in-One PC
1.0 Items Requiring Selective Treatment
Item Description
Notes
Quantity
of items
included
in
product
Printed Circuit Boards (PCB) or Printed
Circuit Assemblies (PCA)
With a surface greater than 10 sq cm
Part22,Part45,Part73,Part78,Part86,Part102,Part120,Part134
8
Batteries
All types including standard alkaline and lithium coin or
button style batteries
Part29(CR2032),Part99(AAA),Part110(AA)
5
Mercury-containing components
For example, mercury in lamps, display backlights, scanner
lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface
greater than 100 sq cm
Includes background illuminated displays with gas discharge
lamps Part53 (LED displays,no lamps)
1
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing
PCB/PCT)
0
Electrolytic Capacitors / Condensers
measuring greater than 2.5 cm in diameter or
height
Part135(Electrolytic Capacitor)
1
External electrical cables and cords
Part124(Adapter Cable),Part136(Power Coard)
2
Gas Discharge Lamps
0
Plastics containing Brominated Flame
Retardants weighing > 25 grams (not
including PCBs or PCAs already listed as a
separate item above)
0
Components and parts containing toner and
Include the cartridges, print heads, tubes, vent chambers,
0
Product End-of-Life Disassembly Instructions
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 2
ink, including liquids, semi-liquids (gel/paste)
and toner
and service stations.
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
Tool Description
Tool Size (if
applicable)
Screwdriver, Lever, Star Screwdriver(six)
NA
Slanted Pliers, Pliers
NA
Hammer
NA
Knife
NA
3.0 Product Disassembly Process
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
A
1
Metal piece
Metal
1
Snap,
Adhesive,
Screwdriver,
Lever,
74
and materials requiring selective treatment can be removed.
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. AIO PC
2. LCD
3. Thermal Fan
4. ODD
5. HDD
6. Keyboard
7. Mouse
8. Power Adapter and Cable
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 3
2
Screw
Metal
9
Screw
Slanted pliers,
Pliers
3
Metal plank
Metal
178
4
Conductive
Anti-Static Foam
Mix
1
5
Plastic piece
Plastic
4
6
Metal plank
Metal
371
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
A
7
Plastic piece
Plastic
19
8
Metal piece
Metal
107
9
Metal plank
Metal
53
10
Plastic case
Plastic
75
EL-MF877-00 Page 3
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 4
11
Nut Metal
1
12
Plastic case
Plastic
596
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
A
13
Label
Plastic
1
EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 5
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
B
14
Screw
Metal
41
Plug, Solder,
Adhesive,
Screw
Screwdriver,
Lever,
Star Screwdriver (six),
Slanted pliers,
Knife
254
15
Metal piece
Metal
1
16
Spring
Metal
1
17
Speaker
Mix
128
18
Conductive
Anti-Static Foam
Mix
2
19
Plastic sheet
Plastic
1
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
EL-MF877-00 Page 5
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 6
B
20
Label
Plastic
1
Part 22 is a
PCBA. The
surface of
part 22 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
22 requires
selective
treatment.
21
Metal case
Metal
507
22
PCBA
PCBA
317
23
Metal piece
Metal
130
24
Plastic ring
Plastic
1
25
Plastic piece
Plastic
1
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
B
26
Wire
Cable/wir
e
48
Part 29 is a
battery.
According to
WEEE
(recast)
directive, part
29 requires
27
Metal plank
Metal
127
28
Plastic pad
Plastic
4
EL-MF877-00 Page 6
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 7
29
Cell battery
Battery
3
selective
treatment.
30
Plastic piece
Plastic
1
31
Plastic pad
Plastic
4
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
B 32
Metal frame
Metal
222
EL-MF877-00 Page 7
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 8
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
C
33
Screw
Metal
12
Adhesive,
Screw
Lever,
Slanted pliers,
Knife
75
34
Plastic pad
Plastic
8
35
PCBA
PCBA
1
36
PCBA
PCBA
1
37
Metal piece
Metal
1
38
Nut Metal
3
EL-MF877-00 Page 8
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 9
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
C
39
Metal plank
Metal
1503
40
Plastic frame
Plastic
252
EL-MF877-00 Page 9
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 10
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
D
41
Label
Plastic
1
Snap,
Adhesive,
Screw
Screwdriver,
Knife
162
Part 45 is a
PCBA. The
surface of
part 45 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
45 requires
selective
treatment.
42
Textile Mix
1
43
Plastic sheet
Plastic
4
44
Plastic piece
Plastic
5
45
PCBA
PCBA
25
46
Metal case
Metal
1057
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
D
47
Film Plastic
57
48
Film
Plastic
57
EL-MF877-00 Page 10
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 11
49
Film Plastic
43
50
Plastic sheet
Plastic
366
51
Film Plastic
33
52
Plastic frame
Plastic
40
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
D
53
LCD LCD
450
Part 53 is a
LCD.
According to,
The surface
of part 53 is
greater than
100 square
centimeters.
According to
WEEE
(recast)
directive, part
53 requires
54
Metal frame
Metal
119
EL-MF877-00 Page 11
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 12
selective
treatment.
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
E
55
Screw
Metal
1
Solder,
Adhesive,
Screw
Screwdriver,
Lever,
Slanted pliers,
Knife
21
56
Label
Plastic
1
57
Textile Mix
1
58
Metal plank
Metal
28
EL-MF877-00 Page 12
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 13
59
Wire
Cable/wir
e
1
60
PCBA
PCBA
14
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
E
61
Plastic case
Plastic
28
62
Metal ring
Metal
3
63
Plastic ring
Plastic
5
64
Plastic piece
Plastic
8
65
Metal piece
Metal
2
66
Metal piece
Metal
1
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Tool
Time
EL-MF877-00 Page 13
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 14
Technique
(s.)
E 67
Metal piece
Metal
1
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Tool
Time
EL-MF877-00 Page 14
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 15
Technique
(s.)
F
68
Screw
Metal
1
Plug, Solder,
Snap,
Adhesive,
Screw
Screwdriver,
Lever,
Star Screwdriver (six),
Slanted pliers,
Knife
96
Part 73 is a
PCBA. The
surface of
part 73 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
73 requires
selective
treatment.
69
Spring
Metal
1
70
Label
Plastic
1
71
Plastic piece
Plastic
1
72
Metal piece
Metal
1
73
PCBA
PCBA
7
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
F
74
FPC
Cable/wir
e
1
Part 78 is a
PCBA. The
surface of
part 78 is
greater than
10 square
centimeters.
75
Metal case
Metal
56
76
Metal piece
Metal
14
EL-MF877-00 Page 15
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 16
77
Electronic
component
Mix
12
According to
WEEE
(recast)
directive, part
78 requires
selective
treatment.
78
FPCA
PCBA
8
79
Electronic
component
Mix
5
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
F
80
Plastic case
Plastic
43
EL-MF877-00 Page 16
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 17
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
G
81
Screw
Metal
6
Adhesive,
Screw
Lever,
Star Screwdriver (six),
Knife
119
Part 86 is a
PCBA. The
surface of
part 86 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
86 requires
selective
treatment.
82
Label
Plastic
1
83
Textile Mix
1
84
Sponge
Plastic
1
85
Plastic piece
Plastic
1
86
PCBA
PCBA
16
EL-MF877-00 Page 17
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 18
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
G
87
Metal plank
Metal
59
88
Connector
Mix
1
89
Plastic piece
Plastic
1
90
Metal piece
Metal
3
91
Metal plank
Metal
38
92
Metal case
Metal
233
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
G
93
Metal plank
Metal
23
94
FPCA
PCBA
13
EL-MF877-00 Page 18
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 19
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
H
95
Metal piece
Metal
0.07
Plug, Snap,
Adhesive,
Screw
Screwdriver,
Knife
139
Part 99 is a
battery.
According to
WEEE
(recast)
96
Plastic pad
Plastic
2.67
EL-MF877-00 Page 19
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 20
97
Screw
Metal
9.4
directive, part
99 requires
selective
treatment.
98
Battery cover
Plastic
2.93
99
Battery
Battery
23.44
100
Metal piece
Metal
4.55
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
H
101
Wire
Cable/wir
e
1.54
Part 102 is a
PCBA. The
surface of
part 102 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
102 requires
102
PCBA
PCBA
9.26
103
Plastic piece
Plastic
0.84
104
Plastic piece
Plastic
0.46
105
Plastic pad
Plastic
18.87
EL-MF877-00 Page 20
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 21
106
Plastic sheet
Plastic
14.5
selective
treatment.
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
H
107
Keypa Keypadd
Plastic
490.4
EL-MF877-00 Page 21
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 22
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
I
108
Plastic piece
Plastic
2.51
Adhesive,
Seal, Screw
Screwdriver,
Knife
29
Part 110 is a
battery.
According to
WEEE
(recast)
directive, part
110 requires
selective
treatment.
109
Screw
Metal
0.78
110
Battery
Battery
47.73
111
Plastic piece
Plastic
0.09
112
Plastic case
Plastic
50.04
113
Plastic piece
Plastic
0.38
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
EL-MF877-00 Page 22
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 23
I
114
Plastic piece
Plastic
0.14
115
Plastic piece
Plastic
0.07
116
Plastic piece
Plastic
1.41
117
Spring
Metal
0.47
118
Plastic ring
Plastic
1.21
119
Label
Plastic
0.02
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
I
120
PCBA
PCBA
14.39
Part 120 is a
PCBA. The
surface of
part 120 is
greater than
10 square
centimeters.
121
Plastic case
Plastic
2.18
122
PCBA
PCBA
3
EL-MF877-00 Page 23
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 24
123
Plastic piece
Plastic
0.04
According to
WEEE
(recast)
directive, part
120 requires
selective
treatment.
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
J
124
Cable
Cable/wir
e
172
Solder,
Adhesive,
Seal, Screw
Screwdriver,
Lever,
Slanted pliers,
Pliers,
Hammer,
Knife
63
Part 124 is an
external
cable.
According to
WEEE
(recast)
directive, part
125
Plastic case
Plastic
103
126
Tape Plastic
1
EL-MF877-00 Page 24
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 25
127
Metal case
Metal
128
124 requires
selective
treatment.
128
Plastic case
Plastic
6
129
Socket
Mix
10
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
J
130
Nut Metal
1
Part 134 is a
PCBA. The
surface of
part 134 is
greater than
10 square
centimeters.
According to
WEEE
(recast)
directive, part
134 requires
selective
treatment.
131
Plastic pad
Plastic
1
132
Screw
Metal
2
133
Screw
Metal
4
134
PCBA
PCBA
316
135
Capacitor
Capacito
r
19
EL-MF877-00 Page 25
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Page 26
Procedure
Part
Disassembly
Remark
No
Picture
No
Name
Picture
Material
Weight
(g)
Connection
Technique
Tool
Time
(s.)
K
136
Power cord
Cable/wir
e
89.4
2
Part 136 is an
external
cable.
According to
WEEE
(recast)
directive, part
136 requires
selective
treatment.
Arch_Lavender-G
WEEE-DI.docx
EL-MF877-00 Page 26
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Loading...