HP N1528A, N1529A Installation And User Manual
N1528A and N1529A
ACL Tape Drive
Instal lation and User’s
Guide
Abstract
This guide provides information about installing, operating, and maintaining the
N1528A and N1529A ACL tape drives on HP NonStop™ servers. This guide is written
for those who install or maintain the N1528A and N1529A ACL tape drives.
Product Version
N.A.
Supported Release Version Updates (RVUs)
This publication supports G06.31 and all subsequent G-series RVUs and H06.11 and
all subsequent H-series RVUs until otherwise indicated by its replacement publication.
Part Number Published
544594-003 July 2010
Document History
Part Number Product Version Published
544594-001 N.A. June 2007
544594-002 N.A. July 2010
544594- 003 N.A. July 2010
Hewlett-Packard Company—544594-003
i
N1528A and N1529A ACL Tape
Drive Installation and User’s
Guide
Glossary Index Examples Figures Tables
What’s New in This Manual v
Manual Information v
New and Changed Information v
About This Manual vii
Notation Conventions vii
1. Overview and Features
Overview 1-1
NonStop S-Series Servers 1-1
NonSto p NS-Series Servers 1-2
Models and Accessories 1-3
Tape Cartridges 1-3
Internal Tape Drive 1-3
Magazine 1-4
Power Supply 1-4
Robotics 1-4
Front Panel Indicators 1-6
2. Setting Up the ACL Tape Drives
Setting Up the N1528A ACL Rackmount Unit 2-1
Setting Up the N1529A ACL Tabletop
2-5
3. Install ing a nd Conf igur ing t he ACL Tape Drive for th e NonS top
S-Series Server
Installation Procedure for New Model 3-1
Installation Procedure for Old Model
3-5
Configuration
3-9
ServerNet/DA 3-9
PMF CRU 3-9
4. Operation
Front Panel 4-1
Contents
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
ii
5. Maintenance
Magazine Door 4-2
Indicators 4-2
Initialization Screen 4-3
ACL Default Screen 4-4
Display Screens and Options 4-4
Technical Support Information Option 4-5
Access Magazine Option 4-6
Move Media 4-6
LCD Contrast Controls 4-8
Power 4-8
Status 4-9
Online 4-9
Menu Selections 4-10
View System Data 4-10
Inserting and Removing Tape Cartridges 4-13
Removing the Magazine 4-13
Inserting Cartridges into the Magazine 4-13
Barcode Labels 4-14
5. Maintenance
Manually Running a Cleaning Cartridge 5-1
6. Troubleshooting
Stuck Tape Removal Procedure 6-1
Platform Problems 6-5
Error Recovery 6-5
Error Recovery Procedures 6-7
Fault Symptom Codes (FSCs) 6-7
A. Specifications
Hardware Specifications A-1
Primary Power
A-1
Voltage Limits
A-1
Frequency Limits
A-1
Power Requirements A-2
Temperature, Humidity, and Altitude A-2
Contents
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
iii
Safety and Compliance
Safety and Compliance
Index
Examples
Figures
Figure 1-1. Hardware Configuration 1-2
Figure 1-2. Rear View of Tape Drive 1-3
Figure 1-3. Tape Cartridge Magazine 1-4
Figure 1-4. View of Barcode Reader and Shuttle Assembly 1-5
Figure 1-5. Front Panel Indicators 1-6
Figure 2-1. N1528A ACL Template 2-1
Figure 2-2. Installing the Slide Members 2-3
Figure 2-3. Installing Slide Member Fasteners 2-4
Figure 2-4. Tabletop Model Clearances 2-5
Figure 3-1. View of Power Switch and AC Power Receptacle 3-2
Figure 3-2. Rear View of Tape Drive 3-3
Figure 3-3. View of Power Switch and Power Receptacle 3-5
Figure 3-4. Rear View Below of Internal Tape Drive 3-7
Figure 3-5. Rear View of Tape Drive 3-8
Figure 4-1. Front Panel 4-1
Figure 4-2. Magazine Door Mechanical Release 4-2
Figure 4-3. Initialization Screen 4-3
Figure 4-4. ACL Default Screen 4-4
Figure 4-5. Technical Support Information 4-5
Figure 4-6.
Access Magazine Screen 4-6
Figure 4-7.
Move Media Screen 4-6
Figure 4-8.
Move Media Screen (Source) 4-7
Figure 4-9.
Move Media Screen (Destination) 4-7
Figure 4-10.
Power Down Initiation Screen 4-8
Figure 4-11.
Menu Screen 4-10
Figure 4-12.
View ACL Options Screen (Initial Screen) 4-11
Figure 4-13.
Tape Magazine With Tape Cartridges Installed 4-14
Figure 4-14. Barcode Label Installation (LTO) 4-15
Figure 5-1. Selecting the Magazine Access Button 5-1
Figure 5-2.
Pressing the Left Magazine Button 5-2
Figure 5-3.
Cleaning Cartridge Placed Into Magazine 5-3
Figure 5-4. Pressing the Move Media Button 5-4
Figure 5-5. Pressing the Execute Move Button 5-5
Contents
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
iv
Tables
Figure 5-6. Loading Cartridge into Drive 5-6
Figure 5-7. Pressing the Move Media Button 5-7
Figure 5-8. Pressing the Execute Move Button 5-8
Figure 5-9. Unloading Cartridge from Drive 5-9
Figure 5-10. Selecting the Magazine Access Button 5-10
Figure 5-11. Pressing the Left Magazine Button 5-11
Figure 6-1. Location of Screws on Shoe Kit 6-1
Figure 6-2. Location of Screws on Shoe Kit 6-2
Figure 6-3. Location of Cables 6-3
Figure 6-4. LTO Tape Drive (Brick) 6-4
Figure 6-5. Troubleshooting Flow Chart 6-6
Tables
Table 1-1. Models and Slot Capacities 1-3
Table 3-1. NonStop SCSI Cables 3-3
Table 3-2. SCSI Cables 3-6
Table 4-1. ACL Front Panel Indicators 4-2
Table 4-2. View ACL Options 4-11
Table 6-1. Error Recovery Procedures 6-7
Table 6-2. Fault Symptom Codes 6-7
Table A-1. Hardware Specifications A-1
Table A-2. Temperature, Humidity, and Altitude Specifications A-2
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
v
What’s New in This Manual
Manual Information
N1528A and N1529A ACL Tape Drive Installation and User’s Guide
Abstract
This guide provides information about installing, operating, and maintaining the
N1528A and N1529A ACL tape drives on HP NonStop™ servers. This guide is written
for those who install or maintain the N1528A and N1529A ACL tape drives.
Product Version
N.A.
Supported Release Version Updates (RVUs)
This publication supports G06.31 and all subsequent G-series RVUs and H06.11 and
all subsequent H-series RVUs until otherwise indicated by its replacement publication.
Document History
New and Changed Information
This manual has new information about the installation process.
Part Number Published
544594-003 July 2010
Part Number Product Version Published
544594-001 N.A. June 2007
544594-002 N.A. July 2010
544594- 003 N.A. July 2010
What’s New in This Manual
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
vi
New and Changed Information
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
vii
About This Manual
Notation Conventions
Hypertext Links
Blue underline is used to indicate a hypertext link within text. By clicking a passage of
text with a blue underline, you are taken to the location described. For example:
This requirement is described under Backup DAM Volumes and Physical Disk
Drives on page 3-2.
About This Manual
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
viii
Hypertext Links
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
1-1
1 Overview and Features
This section includes:
Overview
The auto cartridge loader (ACL) tape drives support the LTO Ultrium Gen 3 tape drive.
They are designed for backup operations for NonStop servers. The N1528A comes in
a rackmount configuration, and the N1529A comes in a tabletop configuration.
NonStop S-Series Servers
These auto cartridge loader tape drives connect to a ServerNet/DA, IOMF2 CRU, or
PMF CRU
on the NonStop S-series server by a SCSI cable. Figure 1- 1 shows how
the ACL tape drives connect to the NonStop S-series server.
Overview 1-1
Models and Accessories 1-3
Internal Tape Drive 1-3
Magazine 1-4
Power Supply 1-4
Robotics 1-4
Front Panel Indicators 1-6
Overview and Features
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
1-2
NonStop NS-Series Servers
NonStop N S- Series Servers
An M8201R Fibre Channel to SCSI router must be used to connect the tape drives to
the Fibre Channel ServerNet Adapter (FCSA) on the HP NonStop NS-series server.
For more information on the router, refer to the M8201R Fibre Channel to SCSI Router
Installation and User’s Guide.
Figure 1-1. Hardware Configuration
NonS t op S-Series
Tape Drive
SCSI Cable
ServerNet/DA,
IOMF2 CRU, or
PMF CRU
Server
Overview and Features
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
1-3
Models and Accessories
Models and Accessories
These auto cartridge loader tape drives are configured with one internal LTO Gen 3
tape drive along with one removable tape cartridge magazine.
Tape Cartridges
The amount of data that can be stored on the LTO Gen 3 tape cartridge can be up to
800 gigabytes ( 2:1 compr ession) . DLTIIItape, DLTIVt ap e, or SD LT m edi a ca rtridg es ar e
not compatible with this tape drive. The size and shape of the tape drive’s media are
similar to those of DLT cartridges in order to make it easy for automation.
Internal Tape Drive
The ACL units supports a single internal tape drive. The internal tape drive can be hotswapped.
Table 1-1. Models and Slot Capacities
Model Drives Slots LTO
N1528A 1 15 LTO 12.0 TB
N1529A 1 15 LTO 12.0 TB
Figure 1-2. Rear View of Tape Drive
Single Drive
Overview and Features
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
1-4
Magazine
Magazine
The ACL units contains one removable tape cartridge magazine that is accessible
through the front left door. The door is opened by using the GUI touch screen on the
control panel.
Power Supply
Power to the ACL units are supplied through an AC connector at the rear panel of the
power supply. The ACL unit’s power is normally controlled from the graphical user
interface (GUI) touch screen; however, a manual power disconnect switch, located at
the rear of the power supply may also be used.
Robotics
The ACL tape drive’s robotics consist of a cartridge shuttle, motor hardware, motor
drives, and other support electronics. These robotics are capable of picking and
placing tapes throughout the tape drive and the tape cartridge magazine.
The cartridge shuttle assembly includes a mounted barcode reader for scanning tape
cartridges installed in the magazine and tape drive.
Figure 1 -3. Tape Ca rtridge Magazine
Note. Both a full barcode reader scan and a physical scan are conducted each time the unit is
initially po w ered up, or ea c h t im e a tape magaz ine is excha nged.
Overview and Features
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
1-5
Robotics
Figure 1-4. View of Barcode Reader and Shuttle Assembly
Barcode Reader Shuttle
Overview and Features
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
1-6
Front Panel Indicators
Front Panel Indicators
The ACL tape drive’s front panel indicators consist of:
•
Viewing window - lets you visually check the unit’s internal operations
•
GUI touch screen - manually operated to setup and configure the unit
•
ACL module status LED - displays the unit’s operational status
Figure 1-5. Front Panel Indicators
ACL Status LED GUI Touch Screen Internal Viewing
Window
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
2-1
2 Setting Up the ACL Tape Drives
This section includes:
Setting Up the N1528A ACL Rackmount Unit
Setting up the ACL rackmount unit requires a template and storage cabinet slide rails
to install the unit in a standard 19-inch rack storage cabinet.
To set up the rackmount model:
1. Ensure that you have adequate space available in the rack.
2. Use the template that is shipped with the unit to mark the location of the mounting
hardware on the mounting rails of the storage cabinet.
Setting Up the N1528A ACL Rackmount Unit 2-1
Setting Up the N1529A ACL Tabletop 2-5
Figure 2-1. N1528A ACL Template
Setting Up the ACL Tape Drives
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
2-2
Setting Up the N1528A ACL Rackmount Unit
a. Push back the tabs in the top of the template and place them in the correct
holes in the mounting rack. Match up the hole pattern indicated on the sides of
the template with the hole pattern in the mounting rack.
b. Make sure to begin measuring in the correct place. If a unit is already installed
immediately below the planned position of the new unit, then place the
template against the front of the mounting rack and rest it on top of the
previously installed unit.
c. Use the front of the template to mark the attachment points for mounting
brackets, rails, components, or cage nuts on the back of the storage cabinet.
d. Use the back of the template to mark the attachment points for the mounting
brackets, rails, components, or cage nuts on the back of the storage cabinet.
3. Remove the template.
4. Install the slide members for the rackmount unit.
5. If the slide members are already installed, attach the front and rear mounting
brackets to the outer and middle slide members.
Setting Up the ACL Tape Drives
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
2-3
Setting Up the N1528A ACL Rackmount Unit
6. Attach the slide members using the supplied fasteners. Install the clip nuts on the
inside of the slide member’s front and back mounting bracket only if the vertical rail
mounting holes are not tapped.
Figure 2-2. Installing the Slide Members
Setting Up the ACL Tape Drives
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
2-4
Setting Up the N1528A ACL Rackmount Unit
7. Push the middle slide member as far as possible to the front of the slide member
assembly.
8. Install the two clip nuts on each of the rack’s front vertical rails.
9. Confirm that the bearing carrier is in the retained position.
10. Lift the unit and visually align the inner and middle slide members.
11. Verify the ball bearing slide members are located in the front position.
12. Slide the unit completely into the rack until the front panel touches the rack.
13. Remove and discard the tape that holds the door in the latched position, leaving
the door open.
Figure 2-3. Installing Slide Member Fasteners
Caution. It is recommended that the unit be lifted by two people. Do not attempt to lift the unit
by yourself.
Setting Up the ACL Tape Drives
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
2-5
Setting Up the N1529A ACL Tabletop
14. Attach the unit to the rack using two 10-32 captive thumbscrews that are located
on the lower left and right front panel.
15. Fully tighten the rear-mounting bracket screws.
Setting Up the N1529A ACL Tabletop
The N1529A ACL tabletop requires no mechanical assembly for mounting. (See
Figure 2-4.) Place the unit on a desk, table, or other stable horizontal surface. Ensure
that the cooling grills at the front and the fans at the rear of the unit are not obstructed.
Allow 12 inches (30.4 centimeters) of clearance at the front and 6 inches (15.2
centimeters) at the rear of the unit to allow for adequate cooling.
Figure 2-4. Tabletop Model Clearances
6 inches
(15.2
1
2 inches
(
30.4
c
enti-
m
eters)
centimeters)
Setting Up the ACL Tape Drives
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
2-6
Setting Up the N1529A ACL Tabletop
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
3-1
3 Installing and Configuring the
ACL Tape Drive for the NonStop SSeries Server
This section includes these topics:
Installation Procedure for New Model
1. Check that the power switch on the tape drive is set to the off position. See
Figure 3-1.
2. Connect the power cord to the tape drive’s AC power receptacle. See Figure 3-1.
3. Make sure the power cord is fully seated.
Installation Procedure for New Model 3-1
Installation Procedure for Old Model 3-5
Configuration 3-9
Note. These AC L units are now shipped in a different type of chassis. Th e ins ta llation
procedure for the new er model is different from the older mo del. If you hav e t he newer model,
please see Installation Proced ure for New Model
for the installa t ion procedu re. F or the
installation procedure for the older model see Installation Procedure for Ol d Model. The
configuration section applies to both types.
Note. Do not attach th e m ale end of the power cord to a power outlet at this time.
Installing and Configuring the ACL Tape Drive for the
NonStop S-Series Server
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
3-2
Installation Procedure for New Model
4. Connect the NonStop SCSI cable to the SCSI port on the SCSI Converter card.
See Figure 3-2
for the location.
5. Connect the other end of the NonStop SCSI cable to a supported SCSI port on the
server.
You can attach the tape drive to a NonStop S-series server using one of the
following:
•
ServerNet/DA
•
IOMF2 CRU
•
PMF CRU
Figure 3-1. View of Power Switch and AC Power Receptacle
AC Power Receptacle Power Switch
Installing and Configuring the ACL Tape Drive for the
NonStop S-Series Server
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
3-3
Installation Procedure for New Model
You can use any of the following NonStop SCSI cables:
6. Connect the one end of the VHDCI SCSI cable to the bottom SCSI port on the
SCSI Converter card. See Figure 3-2.
7. Connect the other end of the VHDCI SCSI cable to the bottom SCSI port on the
tape drive.
8. Install the terminator on the top SCSI port of the tape drive. See Figure 3-2.
Table 3-1. NonStop SCSI Cables
Model Number Description
519-003W 3 meter copper SCSI cable
519-015W 15 meter copper SCSI cable
519-020W 20 meter copper SCSI cable
519-023W 23 meter copper SCSI cable
Figure 3-2. Rear View of Tape Drive
Terminator VHDCI SCSI Cable Connect NonStop SCSI Cable Here
Terminator Switch to On
Installing and Configuring the ACL Tape Drive for the
NonStop S-Series Server
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
3-4
Installation Procedure for New Model
9. Attach the male end of the power cord to an AC power outlet.
10. Toggle the terminator switch to the on position (the terminator switch must be
set to the on position for the NonStop server).
11. Toggle the power switch at the rear of the tape drive to the on position.
12. Press the GUI screen at the front of the tape drive to activate the library.
13. Verify that the drive powers on.
WARNING. The tape drive does not have protection against lightning surges. For this reason,
if you are located in a hig h ris k area, use ex te rnal surge p rot ec t ion rated for use in your
location and be able to h andle the po w er requirem ents of the tape drive enclosure.
Installing and Configuring the ACL Tape Drive for the
NonStop S-Series Server
N1528A and N1529A ACL Tape Drive Installation and User’s Guide —544594-003
3-5
Installation Procedure for Old Model
Installation Procedure for Old Model
1. Check that the power switch on the tape drive is set to the off position. See
Figure 3-3.
2. Connect the power cord to the tape drive’s AC power receptacle. See Figure 3-3.
3. Make sure the power cord is fully seated.
4. Connect the 68-pin to 68-pin SCSI cable to the top SCSI port on the SCSI
Converter card. See Figure3-5
.
5. Connect the other end of the SCSI cable to a supported SCSI port on the server.
You can attach the tape drive to a NonStop S-series server using one of the
following:
Note. Do not attach th e m ale end of the power cord to a power outlet at this time.
Figure 3-3. View of Power Switch and Power Receptacle
Power Switch AC Power Receptacle
Loading...