HP Microsoft Internet Security and Acceleration Security Guide
HP ProLiant DL320 Security Server
Network Information Card
Overview
Before connecting the HP ProLiant DL320 Security Server to the network,
record the configuration information for your environment in the space
provided.
After recording the configuration information, proceed to step 4 of the
DL320 Security Server Quick Setup Poster.
Internal network interface IP setup
The internal network interface (NIC 1) of
the interface assigned to
•
Internal network interface IP
•
Subnet mask: _______________________________________________
•
Preferred DNS server: ________________________________________
•
Alternate DNS server: ________________________________________
NOTE:
If you have more than two DNS servers or any WINS servers,
internal network traffic.
address: ___________________________
enter their IP addresses after the ProLiant DL320 Security Server Setup
Wizard completes.
the ProLiant DL320 Security Server is
External network interface IP setup
The external network interface (NIC 2) of
the interface assigned to external network
address (assigned by the DNS server), en
•
External network interface IP
•
Subnet mask: _______________________________________________
•
Default gateway: ____________________________________________
address: ___________________________
the ProLiant DL320 Security Server is
traffic. If you have a public static IP
ter this information during setup.
Perimeter network interface IP setup
The perimeter network interface (NIC 3)
is optional. The interface is connected
the DMZ). If you have a DHCP server and
address to NIC 3, there is no need to
of the ProLiant DL320 Security Server
to the perimeter network (also known as
intend to automatically assign an IP
provide the address during setup.
ProLiant
Computer name
The ProLiant DL320 Security Server mu
computer name must be 15 alph
Computer name: _____________________________________________
st be assigned a computer name. The
anumeric characters or less.
Administrator password
The administrator password is the password used to log on to the ProLiant
DL320 Security Server. Define the admi
at least six characters and a mix of up
and non-alphanumeric characters
NOTE:
For security reasons, HP recommends destroying any hard
copy notes taken to memorize this pa
storing the notes in a safe place.
nistrator password during setup using
percase and lowercas
e letters, numbers,
(for example, !, $, #, %).
ssword as soon as possible or
Workgroup or domain name
Record the name of the workgroup or doma
Workgroup or domain name: ___________________________________
NOTE:
© Copyright 2006 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to ch
products and services are set forth in the ex
products and services. Nothing herein should be co
HP shall not be liable for technical or editorial errors or omissions
Confidential computer software. Valid license fr
Consistent with FAR 12.211 and 12.212, Commercial Co
Documentation, and Technical Data for Commercial
under vendor’s standard commercial license.
February 2006 (First Edition)
Part Number 411247-001
A domain can be joined anytime after setup completes.
press warranty statements accompanying such
in that will be joined during setup.
ange without notice. The only warranties for HP
nstrued as constituting an additional warranty.
contained herein.
om HP required for possession, use or copying.
mputer Software, Computer Software
Items are licensed to the U.S. Government
Perimeter network interface IP address: ______________________
_____
Loading...