HP LSXM1TGS24QGMODHB1 Quick Start Manual
Manual version: 5P101-20171120
BOM: 3123A1NA
Part number: 5200-4100
CAUTION:
This
SFH
used with a switching fabric module that is not Type H.
NOTE:
Switching fabric module slots are covered by fan trays. To verify the
identifiers of the switching
fabric modules while the switch is operating, use the display device command.
(1) SFP+ port
(2) QSFP+ port
(3) Expansion slot
(4) Ejector lever
(5) QSFP+ port LED
(6) SFP+ port LED
Item
Specification
1 2 4
5
6
3
HPE FlexFabric 12900E LSXM1TGS24QGMODHB1
(JH953A) interface card
1 Card identifier
The card identifier LSXM1TGS24QGMODHB1 is at the upper right corner of the front panel.
2 Specifications
card can be used only with Type H switching fabric modules, which have a character string of
in their card identifiers (for example, LSXM1SFH16C1). Card damage will occur if this card is
card
Multiple interface cards are available for the expansion slot on the card. The following figure uses an
LSWM124XGT2Q interface card as an example.
Figure 1 Front panel
Table 1 Card specifications
Processor MIPS64 (Dual Core) @ 1.2 GHz
SDRAM 8 GB DDR3 SDRAM
Power consumption 125 W to 296 W
Fixed ports
• 24 × 10G SFP+ port
• 2 × 40G QSFP+ port
i
Manual version: 5P101-20171120
BOM: 3123A1NA
Part number: 5200-4100
Item
Specification
modules and cables available for ports on
, see the interface
IMPORTANT:
•
•
•
greatest slot IDs take precedence over other slots for switching fabric module installation.
Product code
Model
Description
(nm)
(µm)
(MHz*km)
distance
Transmission rate of the fixed ports
Transmis s io n m edi um an d max tr a ns m is s io n
distance of the fixed ports
Slot
Compatible device models HPE FlexFabric 12900E switch
• SFP+ port: 10 Gbps
• QSFP+ port: 40 Gbps
• SFP+ port: see Table 3 and Table 4
• QSFP+ port: see Table 5 and Table 6
1 × expansion slot for interface card installation
The interface card in t he ex pansion slot needs to be ordered
separately. For the available interface cards, see Table 2.
For transceiver
the interface card in the expansion slot
card manual.
To verify compatibility of the card with the software release you are using, see the release notes.
On a 12900E switch, when a port on the interf ace card in the expansion slot is operating
correctly, its LED is green and does not indicate the transmission rate.
For the card to start up correctly, make sure the three switching fabric module slots with the
Table 2 Interface cards available for the expansion slot
JH183A LSWM18QC 8-port QSFP+ interface card
JH181A LSWM124XG2Q 24-port SFP+ and 2-port QSFP+ interface card with MACSec
JH180A LSWM124XG2QL 24-port SFP+ and 2-port QSFP+ interface card
JH184A LSWM124XG2QFC 24-port SFP+ and 2-port QSFP+ interface card with FC
JH182A LSWM124XGT2Q
24-port 10GBASE-T and 2-port QSFP+ interface card with
MACSec
Table 3 10-Gigabit SFP+ transceiver modules available for the SFP+ ports
Product
code
JD092B
JD094B
Description
HPE X130
10G SFP+ LC
SR
Transceiver
HPE X130
10G SFP+ LC
LR
Transceiver
Central
wavelength
850 LC
1310 LC
Connector
Fiber
diameter
50/125
µm, MMF
62.5/125
µm, MMF
9/125 µm,
SMF
Modal
bandwidth
2000 300 m (984.25 ft)
500 82 m (269.03 ft)
400 66 m (216.54 ft)
200 33 m (108.27 ft)
160 26 m (85.30 ft)
N/A
Max
transmission
10 km (6.21
miles)
HPE X130
JG234A
10G SFP+ LC
ER 40km
Transceiver
1550 LC
9/125 µm,
SMF
ii
N/A
40 km (24.86
miles)
Loading...