The PIP/POP feature must be initially set up using the
DA - 13134 North America — Version 3 — August 29, 2008
Page 1
QuickSpecs
Technical Specifications
Panel
Panel
PanelPanel
On Screen Display
On Screen Display
On Screen DisplayOn Screen Display
(OSD)
Controls
Controls
ControlsControls
Signal Interface/
Signal Interface/
Signal Interface/Signal Interface/
Performance
Performance
PerformancePerformance
Type
Type
TypeType
Viewable Image Area
Viewable Image Area
Viewable Image AreaViewable Image Area
Screen Opening
Screen Opening
Screen OpeningScreen Opening
(W x H)
Viewing Angle
Viewing Angle
Viewing AngleViewing Angle
Brightness
Brightness
BrightnessBrightness
Contrast Ratio
Contrast Ratio
Contrast RatioContrast Ratio
Response Time
Response Time
Response TimeResponse Time
Pixel Pitch
Pixel Pitch
Pixel PitchPixel Pitch
Backlight Lamp Life
Backlight Lamp Life
Backlight Lamp LifeBacklight Lamp Life
(to half brightness)
Color Gamut
Color Gamut
Color GamutColor Gamut
*All performance specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower.
Buttons or Switches
Buttons or Switches
Buttons or SwitchesButtons or Switches
Languages
Languages
LanguagesLanguages
User Controls
User Controls
User ControlsUser Controls
Horizontal Frequency
Horizontal Frequency
Horizontal FrequencyHorizontal Frequency
Vertical Frequency
Vertical Frequency
Vertical FrequencyVertical Frequency
Native Resolution
Native Resolution
Native ResolutionNative Resolution
Preset VESA Graphic
Yes
One upstream, six downstream ports (cable included)
6.6 ft (2.0 m)
(2) DVI-I, (1) HDMI, and (1) DisplayPort with HDCP support, (1) Component
Video, (1) S-Video, and (1) Composite Video
1 (SPDIF) audio output; passes through the audio from the HDMI input
75 ohms ± 10%
TTL separate synch
15 pin D-sub VGA; HDMI to VGA, used for VGA input
Unpacked w/standUnpacked w/stand
Unpacked w/o stand
Unpacked w/o stand
Unpacked w/o standUnpacked w/o stand
(head only)
Packaged
Packaged
PackagedPackaged
–5° to + 30° vertical
–45° to + 45°
Yes, range 3.94 in (10.0 cm)
Yes
Attachable, ships detached
41° to 95° F (5° to 35° C)
–29° to 140° F (–20° to 60° C)
16.6 to 20.54 x 21.9 x 9.96 in (42.16 to 52.16 x
55.64 x 25.3 cm)
14.25 x 21.9 x 3.29 in (36.2 x 55.64 x 8.35 cm)
13.86 x 26.5 x 18.27 (35.2 x 67.2 x 46.4 cm)
20.06 lb (9.1 kg)
13 lb (5.9 kg)
26.46 lb (12 kg)
DA - 13134 North America — Version 3 — August 29, 2008
External/wood (pallet) – 5.73 lb (2.6 kg)
Internal/paper (cardboard) – .088 lb (0.04 kg)
This product does not contain any of the following substances in excess of
regulatory limits (refer to the HP General Specification for the
Environment at
supplychain/gen_specifications.html
Asbestos
Certain Azo Colorants
Certain Brominated Flame Retardants – may not be used as flame
retardants in plastics
Cadmium
Chlorinated Hydrocarbons
Chlorinated Paraffins
Formaldehyde
Halogenated Diphenyl Methanes
Lead carbonates and sulfates
Lead and Lead compounds
Mercuric Oxide Batteries
Nickel – finishes must not be used on the external surface designed to
be frequently handled or carried by the user.
Ozone Depleting Substances
Polybrominated Biphenyls (PBBs)
Polybrominated Biphenyl Ethers (PBBEs)
Polybrominated Biphenyl Oxides (PBBOs)
Polychlorinated Biphenyl (PCB)
Polychlorinated Terphenyls (PCT)
Polyvinyl Chloride (PVC) – except for wires and cables, and certain
retail packaging has been voluntarily removed from most applications.
Radioactive Substances
Tributyl Tin (TBT), Triphenyl Tin (TPT), Tributyl Tin Oxide (TBTO)
HP follows these guidelines to decrease the environmental impact of product
packaging:
www.hp.com/hpinfo/globalcitizenship/environment/
Eliminate the use of heavy metals such as lead, chromium, mercury
and cadmium in packaging materials.
Eliminate the use of ozone-depleting substances (ODS) in packaging
materials.
Design packaging materials for ease of disassembly.
Maximize the use of post-consumer recycled content materials in
packaging materials.
Use readily recyclable packaging materials such as paper and
corrugated materials.
Reduce size and weight of packages to improve transportation fuel
efficiency.
Plastic packaging materials are marked according to ISO 11469 and
DIN 6120 standards.
DA - 13134 North America — Version 3 — August 29, 2008
Page 5
QuickSpecs
Technical Specifications
End-of-life Management
End-of-life Management
End-of-life ManagementEnd-of-life Management
and Recycling
Approvals, MIC (Korean) Requirements, CSA, Australian ACA Approval, "GS"
Mark, TUV Approvals, CE Marking, FCC Approval, ENERGY STAR® qualified,
Microsoft® Windows® Certification (Microsoft® Windows® 98, Microsoft
Windows 2000, Microsoft Windows XP, and Windows Vista® Premium),
EPEAT™ Silver
Powered directly by the monitor or the PC, the Speaker Bar seamlessly
attaches to the monitor's lower bezel to bring full audio support to select HP
LCD monitors. Features include dual speakers with full sound range and
external jack for headphones. Sold separately. For more information, refer to
the HP Silver LCD Speaker Bar QuickSpecs.
Combines aircraft-grade steel and Kevlar fiber to securely lock down your
monitor and help prevent theft.
DVI-I to VGA cable, DVI-D, HDMI, DisplayPort; USB cable, power cable
HP Display Assistant is a software utility that enables theft deterrence and
allows monitor adjustment, color calibration, and security/asset management
using the Display Data Channel Command Interface (DDC/CI) protocol of
the connected PC.
HP Display LiteSaver allows you to schedule Sleep mode at preset times to
help protect the monitor against image retention, drastically lower power
consumption and energy costs, and extend the lifespan of the monitor.
Pivot Pro software from Portrait Displays, Inc. interacts with your PC's native
graphics driver to enable seamless portrait screen redraws with a simple
mouse-click or keyboard command. Pivot Pro supports 90-degree portrait
and landscape views. Language support is available in English, Japanese,
French, German, Spanish, Italian, and Traditional and Simplified Chinese.
English, B. Portuguese, French, LA Spanish, Korean, S. Chinese, T. Chinese,
Bahasa, Japanese, Danish, Finnish, German, Norwegian, Spanish, Swedish,
Greek, Polish, Russian, Slovenian, Turkish
English, Canadian French, LA Spanish, Brazilian Portuguese, Danish,
German, Castilian Spanish, French, Italian, Dutch, Norwegian, Finnish,
Swedish, Bahasa Indonesian, Korean, T. Chinese, S. Chinese
All carbonite
Yes, standard 4 hole pattern, 100 mm
Yes, one security slot available
or contact your nearest HP sales office. Products
DA - 13134 North America — Version 3 — August 29, 2008
Page 6
QuickSpecs
Technical Specifications
Compatibility
Compatibility
CompatibilityCompatibility
Service and Warranty
Service and Warranty
Service and WarrantyService and Warranty
Compatible with platforms using the VESA standard video modes. Recommended for use with HP
products.
Three years parts, labor, and on-site service. 24-hour, 90-day, toll-free technical support. Replacement
options may include second business day on-site service, or next business day direct replacement, at HP's
sole discretion*. With direct replacement, HP will ship a replacement display product directly to you.
Using the prepaid shipping labels provided, return your failed display to HP in the same packaging as the
replacement. Certain restrictions and exclusions apply. For details see your product warranty or contact
HP Customer Support.
* Service levels and response times for HP Care Pack Services may vary depending on your geographic
location. Service starts from date of hardware purchase. Restrictions and limitations apply.HP Care Pack
Services extend service contracts beyond the standard warranties. To choose the right level of service for
your HP product, use the HP Care Pack Services Lookup Tool at:
Additional HP Care Pack Services information by product is available at:
The HP Quick Release, which ships standard with the HP LP2275w 22-inch Widescreen LCD Monitor, is an easy to use, 100 mm
VESA-compliant, flat panel monitor mounting solution that allows you to quickly and securely attach a flat panel monitor to a variety
of stands, brackets, arms or wall mounts. HP Quick Release can also be used for mounting any combination of devices that are
compatible with the 100 mm VESA Flat Display Mounting Interface Standard. The failsafe "Sure-Lock" mechanism snaps the monitor
(or mounted device) securely in place, and can be further secured with a theft-deterrent security screw.
HP Quick Release enables uniquely flexible product configuration alternatives in a variety of settings, such as:
Storefronts/kiosks: Mount LCD monitors for easy viewing and add touchscreens for interactivity.
Trade shows: Securely mount LCD TVs or monitors in common areas and quickly remove them for safekeeping at the end of
the day.
Front office environments: Minimize desk space requirements with wall or swing-arm mounting of monitors in reception areas.
Training labs: Mount a monitor directly on a 100 mm VESA-compatible PC or an HP Thin Client for all-in-one convenience.
Medical/institutional settings: Securely mount monitors in nursing stations and public areas.
Conference rooms: Mount projectors (with 100 mm VESA-compliant pre-drilled holes) on ceilings, and monitors on walls or
tables.
1.
1.
Four 100 mm VESA mount screw holes
1.1.
2.
1.
1.
1.1.
2.
2.2.
Locking pin screw
Locking pin hole on release/locking
arm
DA - 13134 North America — Version 3 — August 29, 2008
Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts)
Eight 15.5 mm mounting screws (for attachment to HP Thin Client products)
Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands)
One Quick Release "locking" screw
Carbonite
1.
No HP monitors allow positioning of a thin client product between a monitor screen and its stand.
2.
The Quick Release device is not to be used between a monitor screen and its stand unless
provided that way from the factory.
3.
Under no circumstances is the Quick Release device intended to be used in an orientation where
the Release/Lock lever is oriented downward.
The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) depending
upon the mounting configuration used. Please note this is a total weight limit for all devices mounted,
i.e. the combined weight of the monitor and a second device such as an HP Thin Client cannot exceed
24 pounds. Because mounting surfaces vary widely and the final mounting method and configuration
may vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends
that you consult with a qualified engineering, architectural or construction professional to determine the
appropriate type and quantity of mounting fasteners required for your application and to ensure that
your mounting solution is properly installed to support applied loads.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries. Windows
Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. ENERGY
STAR is a registered mark owned by the U.S. government.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth
in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
DA - 13134 North America — Version 3 — August 29, 2008
Page 9
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.