HP LD4745tm Quickspecs

Input/Output

Controls

HDMI

Connects voice or audio input cable.

INPUT

Changes the input source.

DP IN

Connects DisplayPort in cable to the display.

MENU

Accesses the main menus, or saves
your input and exits the menus.

DP OUT

Connects DisplayPort out cable to the display.

Moves the selection up and down.

LAN/VOE

Connects a local area network cable.

Adjusts the volume level.

SPEAKER OUT

Connects optional external speakers to the display.

AUTO/SET

Displays the current signal and
mode. Press this button to adjust the
screen automatically (RGB mode
only).

AUDIO IN

Connects an audio cable to the display.

RGB/VGA COMPONENT
OUT

Connects an RGB/VGA component out cable to the
display.

%/I

Turns the power on or off.

RGB/VGA COMPONENT IN

Connects an RGB/VGA component in cable to the
display.

RS-232C OUT

Connects an RS-232C out cable to the display.

RS-232C IN

Connects an RS-232C in cable to the display.

USB

USB Connects a USB cable to the display.

QuickSpecs

HP LD4745tm 46.96-inch Interactive LED Digital Signage

Display

Overview

DA - 14894 North America — Version 4 — May 9, 2014

Page 1

IR IN

Connects an IR cable to the display.

Model

F1M95AA, F1M95AC

QuickSpecs

HP LD4745tm 46.96-inch Interactive LED Digital Signage

Display

Overview

DA - 14894 North America — Version 4 — May 9, 2014

Page 2

Panel

Type

IPS, LED with direct backlit

Viewable Image Area

119,278 cm

(46.96 in) widescreen; diagonally measured

Panel Active Area

(W x H)

103,96 x 58,48 cm

(36.53 x 20.54 in)

Aspect Ratio

16:9

Viewing Angle

(typical)

Up to 178° horizontal/178° vertical (10:1 minimum contrast ratio)

Brightness

(typical)

*

340 cd/m

2

Static Contrast Ratio
(typical)*

1000:1

Dynamic Contrast Ratio
(typical)*

500,000:1

Response Rate

(typical)*6 ms gray to gray

Pixel Pitch

0.5415 mm

Color Gamut

68%

Color Support**

Can display up to 16.7 million colors

*All performance specifications represent the typical specifications provided by HP's component
manufacturers; actual performance may vary either higher or lower.
** With the use of FRC technology.

Touch Frame
Specifications

Touch Module Type

IR Spread Technology; 5-point multitouch plus gesture

Touch Input

Finger, gloved hand, or passive stylus (=8mm diameter)

Touch Point Response

<10ms with dual touch

Refresh Rate

100 point/ sec (single-and multi-touch)

Positional Accuracy

< ± 1.0mm @ 95% area

Controller Resolution
Support

1920 x 1080

Glass Transmission

85%

Touch Certification

No certification, only supports Win-7 and Win-8 functionality

On Screen Display (OSD)
Controls

Buttons or Switches

Input, menu,

up,

down,

left,

right, auto/set, power

Languages

9 (German, Simplified Chinese, Traditional Chinese, English, Spanish, French,
Italian, Dutch, and Portuguese)

User Controls

Brightness, Contrast, Backlight, Sharpness, Color, Tint, Color temperature,
Image Control, Sound Mode, Input, Aspect Ratio, Audio, Time, Language,
Factory Reset

User Programmable
Modes

20

Audio Controls*

Infinite Sound, Treble, Bass, Standard, Music, Cinema, Sport, Game.

*Note: Monitor does not ship with speakers (available as an accessory)

Signal Interface/
Performance

Horizontal Frequency

30 to 83 kHz

Vertical Frequency

50 to 60 Hz

Recommended Resolution

1920 x 1080 @ 60 Hz

QuickSpecs

HP LD4745tm 46.96-inch Interactive LED Digital Signage

Display

Technical Specifications

DA - 14894 North America — Version 4 — May 9, 2014

Page 3