HP HPE 3PAR StoreServ 8000 User Manual

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Overview

1

HPE 3PAR StoreServ 8000 Storage

The
delivers the performance advantages of a purpose

optimized architecture without compromising resiliency, efficiency, or
data mobility. The new
including inline deduplication, to reduce acquisition and operational costs by up to 75% without compromising performance. Wi
unmatched versatility, performance, and density,

options that support true
convergence of block and file protocols, all
3PAR StoreServ 8000 Storage offers
availability through a complete set of persistent technologies
StoreOnce Backup appliances

start small and grow without painful

upgrades down the road.

NOTE:

Datasheet
sheet&doclang=EN_US&searchquery=&cc=us&lc=en

HPE 3PAR StoreServ 8000 is storage made effortless.

(2-Node Storage Base)

(4-Node Storage Base)

What's New

• Direct Attach Copper (DAC) Cable Support

HPE 3PAR StoreServ 8000 Storage offers enterprise Tier 1 storage at a midrange price. HPE 3PAR StoreServ 8000 Storage

-built, flash-

HPE 3PAR Gen5 Thin Express ASIC provides silicon-based hardware acceleration of thin technologies,

HPE 3PAR StoreServ 8000 Storage gives you a range of

-flash array performance, and the use of spinning media to further optimize costs. HPE

rich, Tier-1 data services, quad-node resiliency, seamless data mobility between systems, high

, and simple and efficient data protection with a flat backup to HPE

. Four models are available: 8200, 8400, 8440, and 8450. You can

For more information about the value of HPE 3PAR StoreServ 8000 Storage refer to the HPE 3PAR StoreServ 8000

http://h20195.www2.hp.com/v2/GetDocument.aspx?docname=4AA5-9493ENW&doctype=data

th

HPE 3PAR StoreServ 8000 Storage

HPE 3PAR StoreServ 8000 Storage

Page

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Overview

Page 2

Host OS Support

Citrix® XenServer® | HP-UX® | IBM® AIX® | Microsoft® Windows® Server, including Microsoft® Hyper-V™ | Apple Mac OS

OpenVMS* | Oracle® Linux® (UEK and RHEL compatible kernels) | Oracle® Solaris | Ubuntu | VMware vSphere™

Red Hat® Enterprise Linux® | Red Hat® Enterprise Virtualization

SUSE® Linux Enterprise | SUSE® Linux Virtualization | IBM Virtualization | Oracle VM

For the latest information on supported operating systems refer to Si
Products (SPOCK): http://www.hpe.com/storage/spock

ngle Point of Connectivity Knowledge for HPE Storage

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Overview

Page 3

Summary

8200

8400

8440

8450

Number of Controller Nodes

2

2 or 4

2 or 4

2 or 4

HPE 3PAR Gen5 ASICs

2

2 or 4

2 or 4

2 or 4

Processors

GHz

Total Cache

832 GiB

1664 GiB

8384 GiB

384 GiB

Flash Cache (optional)

768 GiB

1536 GiB

8000 GiB

Not Applicable

On-Node Cache

64 GiB

128 GiB

384 GiB

384 GiB

Total Cache per node pair

832 GiB

832 GiB

4192 GiB

192 GiB

Flash Cache per node pair

768 GiB

768 GiB

4000 GiB

Not Applicable

Maximum

16Gb/s Fibre Channel Host Ports

4 - 12 ports

4 - 24 ports

4 - 24 ports

4 - 24 ports

10Gb/s iSCSI Host Ports

0 - 4 ports

0 - 8 ports

0 - 8 ports

0 - 8 ports

10Gb/s FCoE Host Ports

0 - 4 ports

0 - 8 ports

0 - 8 ports

0 - 8 ports

1Gb/s Ethernet Adapter

0 - 8 ports

0 - 16 ports

0 - 16 ports

0 - 16 ports

10Gb/s Ethernet Adapter

0 - 4 ports

0 - 8 ports

0 - 8 ports

0 - 8 ports

Maximum Initiators Supported

2048

4096

4096

4096

Built-in 1GbE Ports

2

2 - 4

2 - 4

2 - 4

2U Controller Node Drive Capacity

24

24

24

24

Number of Hard Disk Drives2

6 – 240

6 – 576

6 – 960

Not Applicable

Number of Solid State Drives

6 – 120

6 – 240

6 – 480

6 – 480

Max Raw Capacity (approx.)3

750 TiB4

2400 TiB

3000 TiB

1843 TiB

Usable File Capacity5

2 - 128TiB

2 - 256TiB

2 - 256TiB

2 - 256TiB

Capacity Details

RAID Levels

RAID 0, 1, 5, 6

RAID 5 Data to Parity Ratios

2:1 - 8:1

RAID 6 Data to Parity Ratios

4:2, 6:2, 8:2, 10:2, 14:2

Drive Capacities (SSDs)6

400 SSD, 480 SSD, 920 SSD, 480 nonAFC SSD, 1920 SSD, 3840 SSD, 7680 SSD

Drive Capacities (HDD)

2000 7.2K NL8, 4000 7.2K NL, 6000 7.2K NL, 8000 7.2K NL

Number of Add-on Drive Enclosures9

0 - 9 enclosures

0 - 22 enclosures

0 - 38 enclosures

0 - 18 enclosures

For storage capacity, 1 GiB = 230 bytes and 1 TiB = 1,024 GiB

2 x 6-core 2.2 GHz 2-4 x 6-core 2.2 GHz 2-4 x 10-core 2.4 GHz

2-4 x 10-core 2.4

On-Node Cache per node pair 64 GiB 64 GiB 192 GiB 192 GiB

Host Ports 12 ports 24 ports 24 ports 24 ports

1

8200

8400

8440

8450

300 15K SAS7, 600 15K SAS

600 10K SAS, 1200 10K SAS, 1800 10K SAS

Not Applicable

NOTE: Specifications are subject to change without notice.

1

Two built-in 1GbE ports per node pair can be used either for Remote Copy (RCIP) or for File Persona.

2

Not applicable to HPE 3PAR StoreServ 8200 All-Flash Starter Kit and HPE 3PAR StoreServ 8400 All-Flash Starter Kit

3

Maximum raw capacity currently supported with any and all drive types. The minimum supported raw capacity is equal to

8 * Min drive size available.

4

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Overview

Page 4

5

Usable file capacity supported for HPE 3PAR File Persona Software Suite

drives

6

SSDs are Solid State Drives

7

SAS drives are Serial Access SCSI Drives

8

NL drives are Nearline (7200 RPM) Enterprise SAS drives

9

Each Drive Enclosure holds up to 24 drives in 2U for small form factor (2.5”) drives and 4U for large form factor (3.5”)

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

HP 3PAR StoreServ 8000 All-Flash Starter Kit

Page 5

HPE

The
acceleration at entry

Storage System Base equipped with 8 x 480GB SFF
nonAFC
StoreServ 8200 All
StoreServ

HPE 3PAR StoreServ 8200 All Flash Starter Kit

M0S95A

The

Quantity

Component

1

HP 3PAR StoreServ 8200 2-node Field Integrated Storage Base

K2Q36A

8

HP 3PAR 8000 480GB SAS nonAFC SFF SSD

K2P88A

1

HP 3PAR 8200 Operating System Suite Base LTU

L7B45A

8

HP 3PAR 8200 Operating System Suite Drive LTU

L7B46A

1

HP 3PAR 8200 Virtual Copy Base LTU

L7B57A

8

HP 3PAR 8200 Virtual Copy Drive LTU

L7B58A

1

OS Media Kit

BD362AAE / BD363AAE

HPE 3PAR StoreServ 8400 All-Flash Starter Kit

The
acceleration at entry

Node Storage System
Base equipped with 8 x 480GB SFF
Proactive Care Support. The
number of SSDs (240) as the

HPE 3PAR StoreServ 8400 All-Flash Starter Kit

M0T18A

The

Quantity

Component

1

HP 3PAR StoreServ 8400 2-node Field Integrated Storage Base

H6Y96A

8

HP 3PAR 8000 480GB SAS nonAFC SFF SSD

K2P88A

1

HP 3PAR 8400 Operating System Suite Base LTU

L7B69A

8

HP 3PAR 8400 Operating System Suite Drive LTU

L7B70A

1

HP 3PAR 8400 Virtual Copy Base LTU

L7B81A

8

HP 3PAR 8400 Virtual Copy Drive LTU

L7B82A

3PAR StoreServ 8200 All-Flash Starter Kit

HPE 3PAR StoreServ 8200 All-Flash Starter Kit is an all-flash version of the HPE 3PAR StoreServ 8200 that provides all-flash

-level price. The kit includes the HPE 3PAR StoreServ 8200

SSD drives, the OS Suite, and Virtual Copy software. It also includes 3 year 24x7 Proactive Care Support. The HPE 3PAR

-Flash Starter Kit has the same Drive LTUs cap (48) and maximum number of SSDs (120) as the HPE 3PAR

8200.

HPE 3PAR StoreServ 8200c All-Flash Starter Kit is an orderable part number that includes the following individual parts.

HPE 3PAR StoreServ 8400 All-Flash Starter Kit is an all-flash version of the HPE 3PAR StoreServ 8400 that provides all-flash

-level price in a 4-node scalable system. The kit includes the HPE 3PAR StoreServ 8400 2­nonAFC SSD drives, the OS Suite, and Virtual Copy software. It also includes 3 year 24x7

HPE 3PAR StoreServ 8400 All-Flash Starter Kit has the same Drive LTUs cap (168) and maximum

HPE 3PAR StoreServ 8400.

HPE 3PAR StoreServ 8400 All-Flash Starter Kit is an orderable part number that includes the following individual parts.

1 OS Media Kit BD362AAE / BD363AAE

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

HP 3PAR StoreServ 8000 All-Flash Starter Kit

Page 6

and will be priced accordingly

NOTE: It is possible to add more SSDs, drive enclosures (and any other 8000 accessory), and software to the HPE 3PAR
StoreServ 8200/8400 All-Flash Starter Kit quote. Each of the nested components will appear as separate parts on the quote

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

HP 3PAR StoreServ 8000 Converged File/Block Starter Kit

Page 7

HPE

The
that
arrays.

7.2K LFF HDD
LTU
same Drive LTUs

Model

HPE 3PAR StoreServ 8200 Converged File/Block Starter Kit

M0T74A

The
parts.

Quantity

Component 1

HP 3PAR StoreServ 8200 2N Fld Int Base

K2Q36A

1

HP 3PAR 8200 OS Suite Base LTU

L7B45A

20

HP 3PAR 8200 OS Suite Drive LTU

L7B46A

1

HP 3PAR 8200 Replication Suite Base LTU

L7B49A

20

HP 3PAR 8200 Replication Ste Drive LTU

L7B50A

16

HP 3PAR 8200 File Persona Ste 1TB LTU

BD440A

8

HP 3PAR 8000 600GB SAS 10K SFF HDD

K2P99A

12

HP 3PAR 8000 2TB SAS 7.2K LFF HDD

K2P95A

1

HP 3PAR 8000 LFF(3.5in) SAS Drive Encl

H6Z27A

2

HP 3PAR 8000 2-pt 10Gb Eth Adapter

E7Y70A

1

OS Media Kit

BD362AAE / BD363AAE

parts on the quote and will be priced accordingly

3PAR StoreServ 8200 Converged File/Block Starter Kit

HPE 3PAR StoreServ 8200 Converged File/Block Starter Kit is a converged file/block version of the HPE 3PAR StoreServ 8200
is twice as easy to manage, has 40% better density, and is more attractively priced than other comparable unified storage

The kit includes the HPE 3PAR StoreServ 8200 Storage System Base equipped with 8 x 600GB 10K SFF HDDs and 12 x 2TB

s, a LFF SAS Drive Enclosure, 2 x 2-port 10GbE adapters, the OS Suite, Replication Suite, and 16 x File Persona 1TB

s. It also includes 3 year 24x7 Proactive Care Support. The HPE 3PAR StoreServ 8200 Converged File/Block Starter Kit has the

cap (48) and maximum number of HDDs/SSDs (240/120) as the HPE 3PAR StoreServ 8200.

HPE 3PAR StoreServ 8200 Converged File/Block Starter Kit is an orderable part number that includes the following individual

NOTE: It is possible to add more HDDs/SSDs, drive enclosures (and any other 8000 accessory), and software to the HPE
3PAR StoreServ 8200 Converged File/Block Starter Kit quote. Each of the nested components will appear as separate

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Service and Support

and Warranty Information

Page 8

unconditional replacement in case of drive failure, media wear-out, or both.

streamline storage management, and improve backup and recovery. HPE Support Services enable you

storage solution, giving you full entitlement for the support for need for your IT and business.

2 – HP CSC reports 2014 - 2015

product investment with personalized support from

HPE Proactive Care* with 24x7 coverage, three year Support Service + 20 services credits for 1st
year

Warranty 3 Year, On-site Warranty Service for hardware components. 7x24 4-hour remote response with next

business day on-site response.

The warranty on all HPE 3PAR StoreServ 8000 Solid State Drives is 5 years, parts only. Please refer to
the HPE 3PAR StoreServ 8000 Drives section for the complete list of SSD SKUs. The warranty on all
other HPE 3PAR StoreServ 8000 drives (SAS performance and Nearline SAS) is 3 years, parts only.
Hewlett Packard Enterprise warrants only that the Software media will be free of physical defects for a
period of ninety (90) days from delivery.

For more information about Hewlett Packard Enterprise's Global Limited Warranty and Technical

Service and Support

Support, visit: http://www.hpe.com/storage/warranty

NOTE: All currently available HPE 3PAR StoreServ SSDs carry a five-year warranty offering

Protect your business beyond warranty with HPE Support Services

HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and
stability. Our integrated portfolio of Services for storage help customers reduce costs, optimize data,

to choose the right service level, length of coverage and response time as you purchase your new

Connect your devices Unlock all of the benefits of your technology investment by connecting your products to Hewlett

1

Packard Enterprise. Achieve up to 77%

reduction in down time, near 100%2 diagnostic accuracy and a
single consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre­failure alerts, automatic call logging, and automatic parts dispatch. HPE Proactive Care Service and
HPE Datacenter Care Service customers will also benefit from proactive activities to help prevent
issues and increase optimization. All of these benefits are already available to you with your server
storage and networking products, securely connected to Hewlett Packard Enterprise support.

Optimized Care

1- IDC

HPE Proactive Care Advanced* - 24x7 coverage, three year Support Service

This services helps achieve a higher return on your
a local assigned Account Support Manager who will share best practice advice and personalized
recommendations designed to help improve availability and performance to increase stability and
reduce unplanned downtime. Leverage your system’s ability to connect to Hewlett Packard Enterprise
for pre-failure alerts, automatic call logging and parts dispatch. For business critical incidents, this
service offers critical event management to reduce mean time to resolution. This recommendation
provides 24x7 coverage with four-hour response for hardware and collaborative support that offers
two-hour callback for supported software issues. Collaborative software management is included with
independent software vendors unless you have your software support from Hewlett Packard
Enterprise where we own all cases from start through to resolution.

http://www.hpe.com/h20195/V2/GetDocument.aspx?docname=4AA5-3259ENW&cc=us&lc=en

Standard Care

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Service and Support

and Warranty Information

Page 9

HPE Proactive Care gives customers an enhanced call experience plus helps preventing problems and

HPE Proactive Care gives customers an enhanced call experience plus helps preventing problems and

budgets while proactively responding to your dynamic business.

the customer connect their devices to make the

ata across your

or virtualized server environments.

maintains IT stability by utilizing personalized proactive reports with recommendations and advice
when your products are connected to Hewlett Packard Enterprise. This Service combines three years’
proactive reporting and advice with our 24x7 coverage, four hour hardware response time when there
is a problem.

https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

Basic Care

HPE Proactive Care* with 24x7 coverage, three year Support Service

maintains IT stability by utilizing personalized proactive reports with recommendations and advice
when your products are connected to Hewlett Packard Enterprise. This Service combines three years’
proactive reporting and advice with our 24x7 coverage, four hour hardware response time when there
is a problem.

https://www.hpe.com/h20195/v2/GetPDF.aspx/4AA3-8855ENW.pdf

HPE Services Support
Credits

Services Support Credits offer flexible services and technical skills to meet your changing IT demands.
With a menu of service that is tailored to suit your needs, you get additional resources and specialist
skills to help you maintain peak performance of your IT. Offered as annual credits, you can plan your

NOTE: *HPE Proactive Care and HPE Proactive Care Advanced require that
most of these services and receive all the deliverables.

Related Services

HPE 3PAR StoreServ Storage Installation and Startup Service - Hewlett Packard Enterprise

installs and tests your hardware and software onsite, including configuration. We deliver a custom
tailored storage deployment, properly integrated into your
environment.

http://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA5-8035ENW.pdf

HPE Storage Transformation Workshop - Explore data management transformation journey to

business-aligned visions, aligning your specific situation and Hewlett Packard Enterprise’s
experiences. http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-9541ENW.pdf

HPE Storage Modernization Service - Modernize your storage to take better advantage of physical
or virtualized server environments.. http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA3-

4620ENW.pdf
HPE StoreServ Integration Service - Integrate your new HPE 3PAR StoreServ system so that it is

agile, performs effectively, and scales to rapid growth.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-9254ENW.pdf

HPE 3PAR StoreServ Data Migration - Proven expertise and tools help you migrate d

data center or around the globe.

HPE 3PAR StoreServ Data Migration Service data sheet - US English (A4)

HPE Storage Transformation Workshop - Explore data management transformation journey to

business-aligned visions, aligning your specific situation and Hewlett Packard Enterprise’s
experiences. http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-9541ENW.pdf

HPE Storage Modernization Service - Modernize your storage to take better advantage of physical

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Service and Support

and Warranty Information

Page 10

he HPE EVA to HPE 3PAR Acceleration Service can

help guide you or even execute data migration activities on your behalf that can not only optimize, but

from your storage investment. Complementing

your new HPE 3PAR 8000 storage software, HPE 3PAR 8000 Software Installation and Startup Service

Provides implementation

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA3-4620ENW.pdf

HPE StoreServ Integration Service - Integrate your new HPE 3PAR StoreServ system so that it is

agile, performs effectively, and scales to rapid growth.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-9254ENW.pdf

HPE Storage Data Migration Service - Hewlett Packard Enterprise expertise and tools help you

migrate data across your data center or around the globe. Take the burden of migration off your
shoulders and put it in the capable hands of expert HPE storage migration consultants. Our proven
approach helps orchestrate the complete data migration and consolidation process while maintaining
consistent data availability during the transfer process.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA3-0774ENW.pdf

HPE QuickStart Service for HPE 3PAR StoreServ Storage - Choose the most effective, appropriate

methods for configuring and migrating to a HPE 3PAR
platform.

http://www8.hpe.com/us/en/services/services-detail.html?compURI=tcm:245-

826727&pageTitle=Consulting-Services&contentView=business

HPE EVA to HPE 3PAR Acceleration Service - T

provide OPEX and CAPEX savings as a result of your journey from HPE EVA to HPE 3PAR StoreServ.
This service provides customers with an alternative DIY ("do-it-yourself") data migration option with
guidance from TS Storage migration specialists. With the help of migration experts, this service allows
customers to execute an HPE EVA to HPE 3PAR StoreServ data migration at their own pace and
lowered cost.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-4234ENW.pdf

HPE 3PAR StoreServ 8000 Software Installation and Startup Service - Designed to provide a

smooth startup, HPE 3PAR 8000 Software Installation and Startup Service provides deployment of
your HPE 3PAR 8000 storage software, helping to ensure proper installation in your storage
environment as well as helping you increase the benefit

provides the necessary activities required to help you deploy your licensed HPE 3PAR 8000 software
products into operation.

http://h20195.www2.hpe.com/v2/GetPDF.aspx/4AA5-8036ENW.pdf

HPE SAN Deployment Service - Hewlett Packard Enterprise delivers complete design and

implementation services for Fibre Channel, FCoE, FCIP, SAS, and iSCSI storage area network (SAN)
connectivity components. This service includes three levels of support based on the type of
environment, ranging from simple to more complex. A trained service specialist guides the
implementation of the storage switches in the SAN environment according to Hewlett Packard
Enterprise quality standards.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/5981-8527EN.pdf

HPE 3PAR Replication Software Suite Installation and Startup Service -

of the HPE 3PAR Virtual Copy, Remote Copy, Peer Persistence and Cluster Extension components of
the HPE 3PAR Replication Software Suite product. The service is designed to help get HPE 3PAR
8000 Replication Software Suite up and running quickly and to provide a demonstration of the
product's key features using sample or test data only. HPE 3PAR 8000 Replication Suite includes HPE
3PAR Remote Copy, HPE 3PAR Virtual Copy, HPE 3PAR Peer Persistence, and HPE 3PAR Cluster

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Service and Support

and Warranty Information

Page 11

n of potential disk capacity

tailed I/O analysis and enhancement recommendations for HPE 3PAR StoreServ Storage disk arrays,

Extension. The HPE 3PAR Cluster Extension Implementation service is available separately.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-2570ENW.pdf

HPE Data Replication Solution Service for HPE 3PAR Virtual Copy - HPE Data Replication

Solution Service for HPE 3PAR Virtual Copy Software helps create, manage and configure local
replication data mirroring and snapshot capabilities of HPE 3PAR StoreServ storage systems. This
service enables snapshots and mirroring to facilitate data restores, minimize downtime for backups,
perform application testing, support data mining use with decision-support tools.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA3-8107ENW.pdf

HPE Data Replication Solution Service for HPE 3PAR Remote Copy - HPE Data Replication

Solution Service for HPE 3PAR Remote Copy Software configures real-time data mirroring between
local and remote HPE 3PAR StoreServ storage systems to safeguard critical business information.
Provides scalable deployment of HPE 3PAR Remote Copy Software with real-time data mirroring
between a local and a remote HPE 3PAR StoreServ storage system.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA3-8627ENW.pdf

HPE 3PAR Adaptive Optimization Policy Implementation Service - HPE 3PAR Adaptive

Optimization Policy Implementation Service provides analysis, recommendations, and implementation
of HPE 3PAR Adaptive Optimization policies to enable storage tiering using data collected from the
HPE 3PAR Storage system over time. With the assistance of a designated IT storage administrator, a
service specialist works with the customer to implement Adaptive Optimization policies on the HPE
3PAR Storage system to help deliver service level optimization for virtual and cloud data centers while
reducing cost, increasing agility and minimizing risk.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf

HPE Storage Virtual Volume Design and Implementation Service - When redeploying an HPE

StorageWorks Disk Array, the HPE Virtual Volume Design and Implementation Service provides the
necessary activities required to design and implement a new virtual volume configuration.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA2-3764ENN.pdf

HPE Thin Volume Conversion Service - Provides evaluation and execution of conversion from

standard to thin provisioned virtual volumes for HPE 3PAR Storage. A service specialist advises the
customer on HPE 3PAR Thin Provisioning best practices, provides evaluatio
savings if target virtual volumes are converted, and plans and implements thin conversion processing.
The service leverages 3PAR thin provisioning capabilities to help optimize storage capacity, reduce
cost, increase agility and maintain performance.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA2-3842ENW.pdf

HPE Performance Analysis Service for HPE Disk Arrays - The service provides data collection,

de
HPE EVA P6000 Storage disk arrays and HPE XP P9000 Storage disk arrays. HPE Performance
Analysis Service for HPE Storage Disk Arrays provides a single engagement concerning the
performance of a single HPE 3PAR StoreServ Storage disk array, HPE EVA P6000 Storage disk array
and HPE XP P9000 Storage disk array

http://h20195.www2.hpe.com/V2/GetPDF.aspx/5982-6668EN.pdf

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Service and Support

and Warranty Information

Page 12

Through this service, you will receive a specified number of

The HPE 3PAR Rebalance Service helps balance data across

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-0280ENW.pdf

HPE 3PAR Performance and Capacity Trending Service - HPE 3PAR Performance and Capacity

Trending Service provides data collection, analysis, and reports with key performance and capacity
metrics for your HPE 3PAR StoreServ array.
reports describing long-term trends in performance and capacity usage, and have the option to
purchase additional reports. You will also receive briefing sessions highlighting The Hewlett Packard
Enterprise findings and recommendations.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA5-8792ENW.pdf

HPE 3PAR Health Check Service - The HPE 3PAR Health Check service is delivered as a single

engagement, providing data collection, analysis, report creation, and a briefing session concerning the
performance of a single HPE 3PAR StoreServ Storage System. This health check service is best for
HPE 3PAR StoreServ Storage Systems that have been installed and are in normal production mode. It
can also be used to establish a baseline for future reference to improve the effective use of your
storage system.

http://h20195.www2.hpe.com/V2/GetPDF.aspx/4AA4-3225ENW.pdf

HPE 3PAR Storage Rebalance Service -

an HPE 3PAR StoreServ Storage array to take advantage of the capabilities of the array architecture.
The service provides analysis, planning, and implementation of data movement and/or physical
movement of drive magazines within the array.

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Customer Self Installation

Page 13

Customer Self Installation

Customers have the option of self
available for HPE 3PAR StoreServ 8000 Storage systems

Customer technical profile

I

If the installer doesn’t meet the profile or is not comfortable with the self
recommends
purchase HPE deployment services.

Customer responsibilities

The Customer will:

• Resolve any problems with their SAN and host environment, prior to installing the HPE 3PAR StoreServ 8000 Storage.

Customer Self Installation documentation

Prior to installing the HPE 3PAR StoreServ 8000 Storage system, the installer should thoroughly review the following
documentation.

•

• Forum on HPE 3PAR StoreServ 8000 Self-Install: http://www.hpe.com/forum/3PAR8000CSIHELP

The Customer Self Installation option is available only for initial installs, not for upgrades.
for HPE 3PAR OS software.
link:

NOTE:

to rules identified above) will not void their warranties and will be fully

supported.

(CSI)

-installing HPE 3PAR StoreServ 8000 Storage system. The Customer Self Installation option is
that meets the following criteria:

• 2-node configuration (8200, 8400 2N, 8440 2N, 8450 2N)

• Maximum of 4 additional drive enclosures

• Single rack (the physical Service Processor can be in a separate rack)

• CTO configurations (factory integrated)

• BTO configurations (field integrated) without additional host adapters

n order to successfully install the HPE 3PAR StoreServ 8000 Storage system the installer should:

• Have a good understanding and knowledge of Storage Area Networks, Fiber Channel fundamentals and a basic

understanding of TCP/IP and other networking protocols (DNS/NTP).

• Have a good understanding of server virtualization technology, in particular of Hypervisors such as VMware ESXi and

Microsoft Hyper-V.

• Be able to maintain and install server hardware and Microsoft Windows and/or Linux Operating Systems.

• Have experience creating Storage LUNs, presenting/exporting LUNs to a server and formatting the LUNs to make them

usable for applications.

• Be able to troubleshoot hardware and software issues using logs and documentation.

-installation process, Hewlett Packard Enterprise

engaging the Hewlett Packard Enterprise sales representative or Hewlett Packard Enterprise Channel Partner to

• Ensure that the host and SAN environment is supported and compliant with HPE recommendations and best practices.

Host and SAN Implementation Guides are available at http://www.hp.com/go/hpsc
SPOCK (HP Storage Single Point of Connectivity Knowledge) http://www.hpe.com/storage/spock.

HPE 3PAR StoreServ 8000 Storage Self-Install Guide: http://www.hpe.com/support/3PAR8000CSI

• HPE 3PAR StoreServ 8000 Storage Series Cabling Configuration

Guide: http://www.hpe.com/support/3PAR8000Cabling

• HPE 3PAR StoreServ 8000 Storage Installation video:http://www.hpe.com/support/3PAR8000CSIVideo

Customer Self Repair (CSR) information is available at this

http://h18033.www1.hp.com/hpe/support/selfrepair/ww/replace_part.asp?myinc=s008

Customers performing a self-install (according

. Support Matrix are available on

Customer Self Upgrade (CSU) is optional

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 14

Step 1 - Choose a Base configuration

form factor drives, and PCIe slots for host adapter cards. SAN Kits are also considered base configurations.

HPE 3PAR StoreServ 8000 Base Configurations

Factory Integrated

HP 3PAR StoreServ 8200 2-node Storage Base

K2Q35A

H6Y95A

HP 3PAR StoreServ 8440 2-node Storage Base

H6Y97A

HP 3PAR StoreServ 8440 4-node Storage Base

H6Y98A

HP 3PAR StoreServ 8450 2-node Storage Base

H6Z17A

HP 3PAR StoreServ 8450 4-node Storage Base

H6Z23A

HP 3PAR StoreServ 8200 2-node Storage Base for Storage Centric Rack

K2Q37A

HP 3PAR StoreServ 8400 2-node Storage Base for Storage Centric Rack

H6Z12A

H6Z03A

H6Z09A

HP 3PAR StoreServ 8440 4-node Storage Base for Storage Centric Rack

H6Z14A

HP 3PAR StoreServ 8450 2-node Storage Base for Storage Centric Rack

H6Z20A

HP 3PAR StoreServ 8450 4-node Storage Base for Storage Centric Rack

H6Z25A

HP 3PAR StoreServ 8200 2-node Field Integrated Storage Base

K2Q36A

HP 3PAR StoreServ 8400 2-node Field Integrated Storage Base

H6Y96A

HP 3PAR StoreServ 8400 4-node Field Integrated Storage Base

H6Z02A

H6Z13A

HP 3PAR StoreServ 8450 4-node Field Integrated Storage Base

H6Z24A

•

HPE 3PAR StoreServ 8000 configurations start with the selection of the Base. The Base includes controller nodes, bays for small

in HPE rack

Factory Integrated
in HPE rack in a
Storage Centric
Configuration

Field Integrated

HP 3PAR StoreServ 8400 2-node Storage Base

HP 3PAR StoreServ 8400 4-node Storage Base H6Z01A

HP 3PAR StoreServ 8400 4-node Storage Base for Storage Centric Rack

HP 3PAR StoreServ 8440 2-node Storage Base for Storage Centric Rack

HP 3PAR StoreServ 8440 2-node Field Integrated Storage Base H6Z07A

HP 3PAR StoreServ 8440 4-node Field Integrated Storage Base

HP 3PAR StoreServ 8450 2-node Field Integrated Storage Base H6Z18A

A minimum of one (1) configuration base must be ordered for each array.

• The HPE 3PAR StoreServ 8000 base configuration includes (2 or 4) controller

nodes, (24) small form factor drive bays per node pair, (4) built-in 16 Gb/sec FC
ports per node pair, (4) 16Gb shortwave FC SFP per node pair, (2) PCIe adapter
slots for host adapter cards per node pair (one slot per node), (2) 2m SAS
cables per node pair, (1) mounting rail kit per node pair, and power cords.

• The HPE 3PAR StoreServ 8000 2-node base configuration also includes (2) 1U

rack filler panels to reserve 2U of rack space above the 2-node Storage Base for
a future upgrade to a 4-node configuration

• All base configurations include (1) built-in 1GbE port for management and (1)

1GbE port for either Remote Copy over IP or File Persona, per node.

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 15

configurations

configuration in a HPE Intelligent Series Rack

configuration in a HPE Intelligent Series Rack

• The Storage Centric rack versions of HPE 3PAR StoreServ 8000 are for CTO

(factory Configure-To-Order) only. With a Storage Centric configuration, the
storage system gets placed in the center of the rack so that future expansion of
that storage system becomes easier.

• In Storage Centric configurations, non-3PAR components, with the exception of

certain StoreFabric Storage Networking switches, if added to the same order,
get placed in a separate rack.

The following diagrams show a HPE 3PAR StoreServ 8000 4N Storage System in Storage Centric and non-Storage Centric

StoreServ 8000 4-node Storage system in a storage centric

StoreServ 8000 4-node Storage system in a non-storage centric

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 16

HP 3PAR StoreServ 8450 Upgrade Node Pair

H6Z19A

•

Step 2 - Choose Host Adapter

Host adapters can be ordered separately to be installed in the field or they
adapter cards provide the array with additional FC ports
The additional FC ports can be used for
a Remote Copy relationship. The iSCSI/FCoE ports permit host connection in iSCSI and FCoE environments.
can be used only with the HPE 3PAR File Persona Software Suite for File services connectivity.

HPE

HP 3PAR StoreServ 8000 4-port 16Gb Fibre Channel Adapter

H6Z00A

HP 3PAR StoreServ 8000 2-port 10Gb iSCSI/FCoE Adapter

H6Z10A

HP 3PAR StoreServ 8000 4-port 1Gb Ethernet Adapter

H6Z05A

HP 3PAR StoreServ 8000 2-port 10Gb Ethernet Adapter

E7Y70A

in FC

Ethernet Adapters (H6Z05A and E7Y70A) can be used exclusively

Adapter (E7Y70A) includes (2) 10Gb/s SR SFP+

HPE 3PAR StoreServ 8000 Upgrade Controller Node Pair

Use the HPE 3PAR StoreServ 8000 Upgrade Node Pair to convert an existing previously installed HPE 3PAR StoreServ 8000 2­node Storage Base into a 4-node configuration.

HP 3PAR StoreServ 8400 Upgrade Node Pair H6Z06A

HP 3PAR StoreServ 8440 Upgrade Node Pair H6Z08A

H6Z06A is used to upgrade a HPE 3PAR StoreServ 8400 2-node
Storage Base into a 4-node configuration.

• H6Z08A is used to upgrade a HPE 3PAR StoreServ 8440 2-node

Storage Base into a 4-node configuration.

• H6Z19A is used to upgrade a HPE 3PAR StoreServ 8450 2-node

Storage Base into a 4-node configuration.

• One (1) pair of controller nodes beyond the base configuration is

supported on the 3PAR StoreServ 8000.

• The 3PAR StoreServ 8000 Upgrade Node Pair includes (2) controller

nodes, (24) small form factor drive bays, (4) built-in 16 Gb/sec FC ports,
(4) 16Gb shortwave FC SFP, (2) PCIe adapter slots for host adapter
cards (one slot per node), (2) 2m SAS cables, (4) node link cables, (1)
mounting rail kit, and power cords

• The upgrade node pair includes (2) built-in 1GbE ports for management

and (2) 1GbE ports for either Remote Copy over IP or File Persona.

can be factory configured into controller nodes. Host

, with 10Gb/s iSCSI/FCoE ports, or with 1GbE/s and 10Gb/s Ethernet ports.

connection to hosts or used to connect to other HPE 3PAR StoreServ Storage systems in

3PAR StoreServ 8000 Host Adapters

• The host adapter cards are optional because the Storage Base

products and the Upgrade Controller Node Pair include built­ports.

•

with the HPE 3PAR File Persona Software Suite.

• The 16Gb/s Fiber Channel Adapter (H6Z00A) includes (4) 16Gb/s

shortwave FC SFP+. The 10Gb/s iSCSI/FCoE Adapter

(H6Z10A)

includes (2) 10Gb/s shortwave SFP+. The 10Gb/s Ethernet

The Ethernet ports

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 17

Storage Base

Node 1

Empty

FC

iSCSI/FCoE

Eth

Node Pair

Node 3

Empty

FC

iSCSI/FCoE

Eth

iSCSI/FCoE

E

I J K L M M O P

Node 3

FC

Eth

FC

Eth

iSCSI/FCoE

FC

iSCSI/FCoE

iSCSI/FCoE

Eth

Step 3 - Choose Drive Enclosures

• Each node in a node pair (a node pair is composed of the two

controller nodes in a single 2U enclosure) must have the same
number and type of adapters: FC, iSCSI/FCoE, and Ethernet
adapters may not be intermixed in a node pair.

• The 4 ports of the FC adapter can be individually configured to

connect to a host or to a remote array in an RC configuration.

• The two ports of the iSCSI/FCoE adapter can be individually

configured by the user as iSCSI or FCoE.

Adapter Configurations permitted on HPE 3PAR StoreServ 8000 2-node systems

Product Nodes A B C D

2-node

Upgrade

Node 0

Node 2

Empty

Empty

FC

FC

iSCSI/FCoE

iSCSI/FCoE

Eth

Eth

Adapter Configurations permitted on HPE 3PAR StoreServ 8000 4-node systems

Product Nodes A B C D E F G H

Node 0
Node 1
Node 2
Node 3

Empty
Empty
Empty
Empty

FC
FC
Empty
Empty

iSCSI/FCoE

Empty
Empty

Eth
Eth
Empty
Empty

Empty
Empty
FC
FC

Empty
Empty
iSCSI/FCoE
iSCSI/FCoE

Empty
Empty
Eth
Eth

FC
FC
iSCSI/FCo
E
iSCSI/FCo

4-node Storage
Base

Node 0
Node 1
Node 2

iSCSI/FCoE
iSCSI/FCoE
FC

FC
FC
Eth

Eth
Eth
FC

iSCSI/FCoE
iSCSI/FCoE
Eth

Eth
Eth
iSCSI/FCoE

FC
FC
FC

iSCSI/FCoE

iSCSI/FCoE

Eth
Eth
Eth

NOTE: If the configuration includes Remote Copy over Fibre Channel it is recommended that optional Fiber Channel HBAs
are purchased as the built in ports will not offer sufficient connectivity.
NOTE: Ethernet Adapters can be used only with the HPE 3PAR File Persona Software Suite for File services connectivity

Add drive enclosures to expand the configuration and to add large form factor drives to the configuration. Drive enclosures can be
ordered separately for installation in the field, or they can be factory configured in a rack. Drive enclosures are optional. Because
the Storage Base products and the Upgrade Node Pair include small form factor drive bays, the minimum configuration does not
require any additional drive enclosures. For larger configurations, attach drive enclosures. Each drive enclosure includes 24 drive
bays. The two drive enclosure types can be intermixed in a single array. The HPE 3PAR StoreServ 8200 supports up to nine (9)
added drive enclosures. The HPE 3PAR StoreServ 8400 supports up to twenty-two (22) added drive enclosures. The HPE 3PAR
StoreServ 8440 supports up to thirty-eight (38) added drive enclosures. The HPE 3PAR StoreServ 8450 supports up to eighteen
(18) added drive enclosures.

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 18

HPE 3PAR StoreServ 8000 SFF(2.5in) SAS Drive Enclosure

HPE 3PAR StoreServ 8000 LFF(3.5in) SAS Drive Enclosure

Drive Enclosures

HP 3PAR StoreServ 8000 SFF(2.5in) SAS Drive Enclosure

H6Z26A

HP 3PAR StoreServ 8000 LFF(3.5in) SAS Drive Enclosure

H6Z27A

HP 3PAR StoreServ 8000 SFF(2.5in) Field Integrated SAS Drive Enclosure

E7Y71A

HP 3PAR StoreServ 8000 LFF(3.5in) Field Integrated SAS Drive Enclosure

E7Y72A

The 4U drive enclosure provides 24 LFF drive bays, arranged in four (4)

• Each drive enclosure includes 24 drive bays, (2) IO modules, (2) 1m SAS

cables, (1) mounting rail kit, and power cables.

• The 2U SAS drive enclosure provides 24 SFF drive bays arranged in a

single row.

•

columns of six (6) slots each.

• Drive enclosures are connected in daisy chains from the SAS ports of

the controller nodes.

• The best practice is to balance the drive enclosures across the SAS

ports, remembering that the controller node enclosures include (24)
drives attached to the SAS port labeled DP-1.

• The best practice when including LFF and SFF drive enclosures in the

same array is to arrange them in the rack so that all of the 2U
enclosures that belong to one node pair are together and all of the 4U
enclosures for that node pair are together. When connecting the
backend SAS cables, intermix the 2U and 4U SAS enclosures on each
SAS port.

• With a four node configuration, the best practice is to attach the same

number of drive enclosures and drive types to each node pair.

• To achieve highest availability in multi-enclosure configurations,

configure a minimum of two (2) enclosures per node pair for RAID 1, a
minimum of four (4) enclosures per node pair if RAID 5 is included, and
a minimum of three (3) enclosures per node pair if RAID 6 is included.
Include enclosures containing node pairs in the count with the 2U SAS
enclosures.

• Drive bays that are not filled with a drive must be covered with a drive

blank to preserve proper air flow.

• If future capacity upgrades are expected, include enough Drive

Enclosures so that there are some empty bays in each enclosure after
all drives are added.

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 19

Step 4 - Choose Drives

8000 SAS Drive Enclosures.

HPE 3PAR StoreServ 8000 SAS Drives

HPE 3PAR StoreServ 8000 400GB SAS MLC SFF(2.5in) Solid State Drive

N9Y06A

HP 3PAR StoreServ 8000 480GB SAS cMLC SFF(2.5in) Solid State Drive

K2P88A

HP 3PAR StoreServ 8000 480GB SAS cMLC LFF(3.5in) Solid State Drive

K2Q96A

HP 3PAR StoreServ 8000 1.92TB SAS cMLC SFF(2.5in) Solid State Drive

K2P89A

HP 3PAR StoreServ 8000 3.84TB SAS cMLC SFF(2.5in) Solid State Drive

K2P91A

HPE 3PAR SAS HDDs

HP 3PAR StoreServ 8000 300GB SAS 15K SFF(2.5in) Hard Drive

K2P97A

HP 3PAR StoreServ 8000 600GB SAS 15K SFF(2.5in) Hard Drive

K2P98A

HP 3PAR StoreServ 8000 600GB SAS 10K SFF(2.5in) Hard Drive

K2P99A

HP 3PAR StoreServ 8000 1.2TB SAS 10K SFF(2.5in) Hard Drive

K2P93A

HP 3PAR StoreServ 8000 1.8TB SAS 10K SFF(2.5in) Hard Drive

K2P94A

HP 3PAR StoreServ 8000 2TB SAS 7.2K SFF(2.5in) Hard Drive

M0S92A

HP 3PAR StoreServ 8000 2TB SAS 7.2K LFF(3.5in) Hard Drive

K2P95A

HP 3PAR StoreServ 8000 4TB SAS 7.2K LFF(3.5in) Hard Drive

K2P87A

HP 3PAR StoreServ 8000 6TB SAS 7.2K LFF(3.5in) Hard Drive

K2P96A

HPE 3PAR StoreServ 8000 8TB SAS 7.2K LFF(3.5in) Hard Drive

P9B44A

• Small Form Factor (SFF)-specific configuration practices

Drives are orderable at the time the array is purchased, or can be added in the future when additional capacity is required. HPE
3PAR StoreServ 8000 drives are sold as single drives. Note that these drives are only compatible with the HPE 3PAR StoreServ

HPE 3PAR SSDs

HP 3PAR StoreServ 8000 480GB SAS MLC SFF(2.5in) Solid State Drive K2Q95A

(Performance HDDs)

HPE 3PAR NL SAS
HDDs

HPE 3PAR StoreServ 8000 7.68TB SAS SFF (2.5in) Solid State Drive

• For each drive type installed in the array, the minimum recommended

P9L83A

initial quantity is eight (8) drives per node pair for SSD and SAS
performance HDDs, and twelve (12) drives per node pair for Nearline
HDDs.

NOTE: 8 drives support RAID 1 and RAID 5. For RAID 6 choose 12
drives.

• Minimum upgrade quantity is 4 drives per node pair or 2 drives per

enclosure, whichever is larger. Best practice is to run Autonomic
Rebalance (also known as tunesys) after adding the drives.

• RAID 6 is strongly recommended for Nearline drives.

• All node enclosures must contain either zero (0) or an even number of

the same type of drives (FC, NL, SSD).

• All drive enclosures must contain an even number of drives, with a

minimum of two.

• A best practice is to add equal numbers of drives to all enclosures

compatible with the drive type being added.

• With a four node configuration, the best practice is to attach the same

number and type of drives to each node pair.

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 20

is allowed as long as each drive type is installed in even pairs in

containing drives. Different columns do not have to contain the

An all LFF drive configuration is permitted, leaving the Storage

Drive

K2P90A

Solid State

Drive

M0T66A

HP 3PAR StoreServ 8000 600GB SAS 15K SFF(2.5in) FIPS Encrypted Hard Drive

K2P92A

HP 3PAR StoreServ 8000 1.2TB SAS 10K SFF(2.5in) FIPS Encrypted Hard Drive

K2P85A

HPE 3PAR StoreServ 8000 2TB SAS 7.2K LFF(3.5in) FIPS Encrypted Hard Drive

N9Y04A

HPE 3PAR StoreServ 8000 4TB SAS 7.2K LFF(3.5in) FIPS Encrypted Hard Drive

N9Y05A

HP 3PAR StoreServ 8000 6TB SAS 7.2K LFF(3.5in) FIPS Encrypted Hard Drive

K2P86A

HPE 3PAR StoreServ 8000 8TB SAS 7.2K LFF(3.5in) FIPS Encrypted Hard Drive

P9B45A

HPE 3PAR 8200 Data Encryption LTU

L7B67A

HPE 3PAR 8200 Data Encryption E-LTU

L7B67AAE

HPE 3PAR 8400 Data Encryption LTU

L7B91A

HPE 3PAR 8400 Data Encryption E-LTU

L7B91AAE

HPE 3PAR 8440 Data Encryption LTU

L7C15A

HPE 3PAR 8440 Data Encryption E-LTU

L7C15AAE

HPE 3PAR 8450 Data Encryption LTU

L7C39A

HPE 3PAR 8450 Data Encryption E-LTU

L7C39AAE

- SFF drives may be loaded into the Storage Base enclosures,

the Upgrade Node Pair enclosure and the 2U SAS drive
enclosure.

- SFF drives must be loaded in pairs of identical drives,

beginning with the leftmost slot, slot 0, and filling to the right,
leaving no empty slots between drives.

• Large Form Factor (LFF)-specific configuration practices

- LFF drives may be loaded into the 4U SAS drive enclosure.

- LFF drives must be loaded in pairs of identical drives starting

at the bottom of a column, leaving no empty slots between
drives in the column.

- Intermixing SSDs and spinning media in a LFF drive enclosure

the same column.

- It is permitted to have empty columns between columns

same number of drives.

-

Base Enclosure empty.

HPE 3PAR FIPS
Encrypted SSD/HDD

HPE 3PAR Encryption
License

HP 3PAR StoreServ 8000 920GB SAS MLC SFF(2.5in) FIPS Encrypted Solid State

HP 3PAR StoreServ 8000 1.92TB SAS cMLC SFF(2.5in) FIPS Encrypted Solid State
Drive

HPE 3PAR StoreServ 8000 3.84TB SAS cMLC SFF(2.5in) FIPS Encrypted

K2R27A

• An encrypted HPE 3PAR StoreServ array, i.e. any HPE 3PAR StoreServ

array that has the HPE 3PAR Data Encryption license activated or
intended to be activated, must have only self-encrypted drives installed.

• A non-encrypted HPE 3PAR StoreServ array can have a mix of

encrypted and non-encrypted drives.

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 21

Establishment (CSE) as meeting the

l key manager. Supports KMIP 1.1 for key management

A data encryption license (LTU) is required to enable encryption on the

Step 5 - Choose Service Processor Implementation

- For VSP on VMware, the server must be listed in the VMware Compatibility Guide

• Customers have option to turn on encryption, non-disruptively, at any

time, even after data has been written to the system.

• FIPS 140-2 Validated Self-Encrypting Drives (SEDs) have been certified

by the U.S. National Institute of Standards and Technology (NIST) and
Canadian Communications Security
Level 2 security requirements for cryptographic modules as defined in
the Federal Information Processing Standards (FIPS) 140-2 Publication

• Strengthen the DAR solution with an optional FIPS 140-2 Level-2

validated externa
communications

• Supports HPE Enterprise Secure Key Manager 4.0 and SafeNet

KeySecure k460 and k150 centralized key management

•

array. One encryption license is required for each encrypted array.

• Once encryption is enabled on the HPE 3PAR StoreServ Storage, it

cannot be disabled.

• The local key manager is included in the HPE 3PAR OS. There is not a

separately orderable part number for the local key manager.

The HPE 3PAR Service Processor remotely monitors the HPE 3PAR StoreServ 8000 and enables remote servicing of the array.
The key capabilities of the Service Processor are to:

• Enable rapid, proactive responses to issues

• Provide a secure communication channel between the customer's data center and HPE 3PAR Central for:

- Remote Online Software Upgrade --Upgrade software with no application disruption

- Remote Diagnostics --Maintain key diagnostic information centrally on a historical basis

- Remote Serviceability--Provide fast predictive response and remediation

Each HPE 3PAR StoreServ 8000 requires its own Service Processor. The Service Processor functions as the communication
interface between a customer's IP network and HPE 3PAR Central by managing all service-related communications. The Service
Processor leverages the industry-standard HTTP over Secure Sockets Layer (HTTPS) protocol to secure and encrypt data
communication. The Service Processor can be deployed either as a virtual Service Processor (VSP) or a physical Service Processor.

Virtual Service Processor
A virtual Service Processor is included free with the base HPE 3PAR Operating System. The virtual Service Processor can be
installed on a customer-provided VMware or Microsoft Hyper-V system that meets the following specifications:

• Virtualization operating system

- VMware vSphere ESXi 4.1, 5.0, 5.1, 5.5

- Microsoft Hyper-V Server 2008 R2, 2012 or 2012 R2

• Server features

- 2 GB RAM (minimum for the VSP Virtual Machine)

- 256 GB free disk space (minimum for the VSP Virtual Machine)

NOTE: VSP storage must not reside on the array it is managing.

- DVD ROM or DVD RW

- 1 Gb Ethernet port

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 22

Physical Service Processor

with Redundant Power Supply.

Service Processor

from all

HP 3PAR Policy Manager Software LTU

TE400B

es in adjacent racks to the nodes in the base rack. OM4 Fiber Cables are required for host connectivity, Remote Copy

and Peer Motion. The copper 1GbE cables are used for Remote Copy over IP and for connection to the Management Port.

Cables

HP 10m Mini SAS High Density Active Optical Cable

E7V95A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable

QK732A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable

QK733A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable

QK736A

- For VSP on Hyper-V, the server must be listed on the Windows Server Catalog

The physical Service Processor is a dedicated storage appliance located within the storage rack providing close proximity to the
HPE 3PAR StoreServ 8000 Storage. The physical Service Processor is fully supported and maintained by HPE Services. The
physical Service Processor has serial port connectivity that provides maintenance access for trouble shooting capabilities.

If a VMware server is not available to run the virtual Service Processor, the physical Service Processor is the alternative choice for
remote monitoring and remote service. The physical Service Processor is available in two version: with Single Power Supply and

HP 3PAR StoreServ SPS Service Processor K2R28A

HP 3PAR StoreServ RPS Service Processor K2R29A

HPE 3PAR Policy Server
HPE 3PAR Policy Server works to implement customer-configurable remote service access policies. Installed on a customer­provided host, Policy Server provides the customer with ultimate flexibility and control to allow or deny outbound communication
or remote service connections to and from an HPE 3PAR StoreServ Storage system. Policy Server also serves as the centralized
point for collecting and storing audit logs of all diagnostic data transfers and authorized remote service connections to and
configured HPE 3PAR Storage systems. HPE 3PAR Policy Server provides the

• The customer has complete control over policy administration.

• A centralized policy administration for all HPE 3PAR Storage systems is provided.

• A centralized audit log to facilitate security audits is provided.

• Up to 100 3PAR systems can be managed with a single 3PAR Policy Server license

• Policy Server 6.1.5 can be run on a Virtual Machine. For the latest information on supported hypervisors, refer to Single

Point of Connectivity Knowledge for HPE Storage Products (SPOCK): http://www.hpe.com/storage/spock

Step 6 - Choose Cables for host connection and remote copy connection

Cables are required on the HPE 3PAR StoreServ 8000 Storage for drive enclosure connections and for host connectivity. Copper
SAS cables are required for connecting the drive enclosures to the nodes on the same rack and for daisy chaining between
adjacent drive enclosures. Storage Base products, the Upgrade Node Pair and the Drive Enclosures all include Copper SAS cables.
SAS Active Optical Cables are required if an HPE 3PAR StoreServ 8000 needs to be expanded into an adjacent rack, to connect
drive enclosur

SAS Active Optical Cables

HP 25m Mini SAS High Density Active Optical Cable E7V96A

OM4 Cables

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable QK734A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable QK735A

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 23

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable

QK737A

HP 4.3m/14ft CAT5 RJ45 M/M Ethernet Cable

C7536A

HP 7.6m/25ft CAT5 RJ45 M/M Ethernet Cable

C7537A

HP 15.2m/50ft CAT5 RJ45 M/M Ethernet Cable

C7542A

HP Multi Fiber Push On to 4 x Lucent Connector 5m Cable

K2Q46A

HP Multi Fiber Push On to 4 x Lucent Connector 15m Cable

K2Q47A

Direct Attach Copper Cables*

HPE 3COM (H3C)

HP X240 QSFP+ 4x10G SFP+ 1m DAC Cable

JG329A

HP X242 10G SFP+ to SFP+ 1m Direct Attach Copper Cable

J9281B

Cisco

HPE C-series 5M Passive Copper SFP+ Cable

K2Q22A

NOTE:

with iSCSI, FcoE, and File protocols.

Step 7 - Choose Racking Options

HPE Rack and Rack Options

Intelligent Series Rack with the appropriate power

Intelligent Series Rack must be purchased for factory configuration. Additional 3PAR

installation. When calculating available U-space, assume that no space will be placed between the mounted

Copper 1GbE cables

Optical splitters

HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable JD096C

HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable JD097C

HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable JG081C

HPE X240 QSFP+ 4x10G SFP+ 3m DAC Cable JG330A

HPE X240 QSFP+ 4x10G SFP+ 5m DAC Cable JG331A

HPE ProCurve

HP X242 10G SFP+ to SFP+ 3m Direct Attach Copper Cable J9283B

HPE C-series 3M Passive Copper SFP+ Cable K2Q21A

DAC cable support for 3PAR 8000 platforms requires HPE 3PAR OS

version 3.2.2 MU3 or higher. DAC cables are supported for 10GbE speeds

The HPE 3PAR StoreServ 8000 is compatible with most industry standard 4-post EIA 19 inch racks with square mounting holes,
including the HPE Intelligent Series Rack and the HPE 10000 G2 Series Rack. The HPE 3PAR StoreServ 8000 can be factory
configured and shipped in a rack or shipped without a rack for field integration into an existing rack. The rack used for factory
integration is the HPE Intelligent Series Rack.

Factory
Integration

Primary
Configuration
Rules

Select a rack to house your HPE 3PAR StoreServ 8000.

NOTE: The HPE Intelligent Series Rack is the only series supported for factory configuration.

The HPE 3PAR StoreServ 8000 will be configured into an HPE
distribution units (PDUs). If other products such as servers or back-up products are included in the cab, a
different PDU will be added (if required) or can be chosen from a list of appropriate offerings shown in the
configuration tool. The HPE
StoreServ 8000 controller node enclosures and drive enclosures may be ordered for multiple subsystem
integration at the factory. The 3PAR StoreServ 8000 is also supported in HPE 10000 G2 Series racks for field

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 24

interior U-space of the rack.

HP 47U 600mm x 1075mm Enterprise Shock Rack

BW912A

HP 47U 1075mm Side Panel Kit

BW915A

HP 42U 600mm x 1075mm Enterprise Shock Rack

BW904A

HP 42U 1075mm Side Panel Kit

BW906A

HP 36U 600mm x 1075mm Enterprise Shock Rack

BW896A

HP 42U 1200mm Side Panel Kit

BW909A

protection/pdu.html

HP EVA PDU Pivot Kit

AG730A

configurations. This kit allows the PDUs to be placed in the back of the rack without requiring any
rack U space.

recommended and is the default option when

orders are configured, as it will save 2U of valuable rack space.

appropriate.

Non-HPE rack

information included in the HPE 3PAR StoreServ 8000 StoreServ 8000 Site Planning Guide

based licensing

enses to Use (LTU), a Base LTU that enables the software feature for the system and a Drive LTU that licenses the

that is installed in the array, independent of drive type. For the HPE 3PAR StoreServ 8200 the Drive LTUs cap at 48. For the HPE

components. For redundancy, order PDUs in quantities of two. Refer to the Configuration and User Guide in the
Information Library at the Rack Solutions webpage.

HPE Intelligent
Series Racks

HPE PDU Pivot
Kit

NOTE: The number of components that will fit in a rack varies and is determined by the

HP 36U 1075mm Side Panel Kit BW898A

HP 42U 600mm x 1200mm Enterprise Shock Rack BW908A

For more information on the HPE rack offerings, please see the following URL:

http://h18004.www1.hpe.com/products/servers/platforms/rackandpower.html

.

For more information on rack options, see: http://www.hpe.com/products/rackoptions.
For more information on PDUs, see:

http://h18004.www1.hpe.com/products/servers/proliantstorage/power-

.

Used to reclaim 2U of space in an HPE Intelligent Series Rack with HPE 3PAR StoreServ 8000

NOTE: The use of the PDU Pivot Kit is strongly

NOTE: 0D1 will appear after this part number to indicate factory integration where

The Storage Bases, the Upgrade Node Pair, and the Drive Enclosures include mounting rails that

and power
requirements

are compatible with industry standard 4-post EIA 19 inch racks with square mounting holes. For
detailed information on determining compatibility of a non-HPE rack, please review the

Step 8 - Choose Software

Hewlett Packard Enterprise provides an extensive selection of features for HPE 3PAR StoreServ Storage. All of the features
available on the HPE 3PAR StoreServ 20000 Storage system are also available on the HPE 3PAR StoreServ 8000 Storage system,
the result of a common architecture that spans from small and medium businesses to the largest global enterprise. For convenient
ordering, the 3PAR StoreServ 8000 provides the features in Suites.

Two types of software licensing methods are employed with the HPE 3PAR StoreServ 8000. Some software titles are licensed per
system; other titles are licensed by drive. With system-based licensing one license covers the whole array, independent of
configuration or capacity. Drive-based licensing, in contrast, is licensed per installed drive. A software title with drive­includes two Lic
use of one drive. For each software title, purchase one Base LTU per title per array, and one Drive LTU, up to a cap, for every drive,

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 25

http://h18006.www1.hpe.com/storage/solutions/3par/software.html

http://h20195.www2.hpe.com/v2/GetPDF.aspx/c04199812.pdf

3PAR Operating

3PAR Host Explorer

ms. Other highlights

3PAR Full Copy, autonomic rebalancing capabilities that help you optimize the

, EMC VMAX (VMAX, VMAX SE, VMAX 10K, 20K, 40K)

or HDS NSC, USP, USP V, USP VM.

HPE 3PAR
Replication Software

This software suite enables rich set of file protocol services, core file data services and an Object Access

licensed based on aggregate usable file capacity in increments of 1TB software LTU.

3PAR StoreServ 8400 the Drive LTUs cap at 168. For the HPE 3PAR StoreServ 8440 the Drive LTUs cap at 320. For the HPE 3PAR
StoreServ 8450 the Drive LTUs cap at 168. After reaching the cap, you do not need to purchase any more Drive LTUs for that title.

For more information regarding HPE 3PAR software see
For more information regarding HPE 3PAR 8000 software SKUs
see:

HPE
System Software
Suite (Required)

Suite

Required for all new HPE 3PAR StoreServ systems, this foundational software suite gives you
everything you need to get up and running quickly and efficiently. Powered by HPE 3PAR ASIC, HPE
3PAR StoreServ’s Thin Technologies which include HPE 3PAR Thin Provisioning, HPE 3PAR Thin
Persistence, HPE 3PAR Thin Conversion and HPE 3PAR Thin Deduplication, form the base of this
software suite. Performance acceleration is assured with HPE 3PAR Adaptive Flash Cache by reducing
application response time.
Network simplification are security are covered with VLAN tagging. Simplified management is offered
by HPE 3PAR Operating System, HPE 3PAR StoreServ Management Console, HPE
and HPE SmartStart software designed to get you off to a quick start with your new HPE 3PAR
StoreServ system; HPE 3PAR System Reporter and HPE 3PARInfo software are designed to track
performance and capacity utilization trends for multiple HPE 3PAR StoreServ Syste
of this suite include HPE
use of future capacity expansions, and support for standard multipathing software for high availability
in clustered environments. A one year license for online import is included to enable migration from
HPE EVA, EMC CLARiiON CX4, EMC VNX/VNX2

This suite bundles HPE 3PAR Virtual Copy with HPE 3PAR Remote Copy software, both also sold
separately for all HPE 3PAR StoreServ models. HPE 3PAR Virtual Copy software protects and shares
data affordably with rapid recovery using reservation-less, non-duplicative, copy-on-write snapshots.
HPE 3PAR Remote Copy offers simple and cost effective data protection for efficient multi-tenant
disaster recovery.
Also, included in this bundle is Peer Persistence which ensures transparent automatic failover over
metropolitan distances using Remote Copy Synchronous mode. The Suite also includes HPE 3PAR
Cluster Extension Software which enables automatic failover across data centers using Remote Copy
Asynchronous mode.

HPE 3PAR Data
Optimization
Software Suite

This software bundle combines HPE 3PAR Dynamic Optimization, HPE 3PAR Adaptive Optimization,
HPE 3PAR Priority Optimization and HPE 3PAR Peer Motion software together. HPE 3PAR Dynamic
Optimization delivers the required service levels for the lowest possible cost throughout the data
lifecycle. HPE 3PAR Adaptive Optimization improves storage utilization by enabling cost-optimized
storage tiering. HPE 3PAR Priority Optimization assures service levels with QoS controls for mission
critical applications. HPE 3PAR Peer Motion enables load balancing at will wherein, movement of data
and workloads between arrays is initiated without impacting applications, users or services. The four
software titles bundled in this suite are also sold separately for all HPE 3PAR StoreServ models.

HPE 3PAR File
Persona Software
Suite

API to extend the spectrum of primary storage workloads natively addressed by HPE 3PAR StoreServ
8000 Storage. With this solution, the architectural benefits of HPE 3PAR StoreServ 8000 Storage can
be extended to use cases such as: home directories and user shares; content management and
collaboration; data preservation and governance; and custom cloud applications. This software suite is

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 26

resulting in the creation of fewer zones, and enables configuration of zones in minutes, not hours.

Application Software
Suite for Hyper-V

V

Application Software
Suite for Exchange

Application Software
Suite for Oracle

intrusive

reliability and cost effective retention of deduplicated backups

http://www.storefrontremote.com

Step 9 - Choose File Controller

HPE 3PAR Security
Software Suite

This software suite bundles HPE 3PAR Virtual Domains and HPE 3PAR Virtual Lock software. With this
suite, you can segregate access and deliver robust storage services for different applications and user
groups with additional security attached to the retention of storage volumes.

HPE Smart SAN HPE Smart SAN for HPE 3PAR makes end-to-end SAN configuration and management simple and

autonomic, reducing the probability of errors through SAN automation. It is an application embedded in
the SAN components (array, hosts and switches) that enables the 3PAR to automate configuration for
settings and policies across the SAN. Smart SAN features enable customers to automate peer zoning,

HPE 3PAR

Protect your Microsoft Hyper-V environment with HPE 3PAR Recovery Manager for Microsoft Hyper­and the HPE 3PAR VSS Provider software, included in this software bundle.

HPE 3PAR

HPE 3PAR

This bundle gives you the essentials for use with Microsoft Exchange, including HPE 3PAR Recovery
Manager for Exchange and the HPE 3PAR VSS Provider software.

Everything you need for protecting Oracle databases, including HPE 3PAR Recovery Manager for
Oracle and Oracle space reclamation capabilities.

HPE StoreOnce
Recovery Manager
Central

By combining the performance of snapshots with the protection of backups, this software integrates
HPE 3PAR StoreServ with HPE 3PAR StoreOnce Backup Systems to provide a converged availability
and flat backup service that augments traditional backup processes. With this automated, non­software, the simplicity and performance of local and remote snapshots can be combined with the

HPE StoreFront
Remote SaaS Portal

The HPE StoreFront Remote SaaS Portal provides proactive tools and integrated data collection from
the HPE 3PAR StoreServ Storage arrays that call home to deliver unique insights and analytics all in
one dashboard. Identify capacity and performance issues early through intuitive capacity and
performance trend analysis and forecasting. These valuable analytics help maximize asset utilization
and optimize the datacenter with recommendations and remedial actions when issues arise. Users can
log into

to claim their arrays and get access for free.

With HPE 3PAR StoreServ File Controller you get an efficient, bulletproof, and effortless way to provide file storage from HPE 3PAR
StoreServ Storage. 3PAR StoreServ File Controller saves you time and money by supporting hundreds to thousands of concurrent
users and diverse file workloads .It also has non-intrusive data deduplication that provides an average 50-60% in space savings. It
provides security through features such as built-in encryption, sophisticated access controls, online snapshots, and the ability to run
endpoint protection and backup software onboard so that data is protected at rest and in flight. HPE 3PAR StoreServ File
Controllers are clustered file gateway configurations with transparent failover and online rolling maintenance updates that deliver
continuous availability of data to users, servers, and applications. With a straightforward and consistent management experience, it
also provides robust capabilities for demanding 24 x 7 file storage environments.

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Configuration Information

Page 27

For more details on the specifications and data services offered by the HPE 3PAR StoreServ File Controller please refer to the
following link:

http://www8.hpe.com/h20195/v2/GetHtml.aspx?docname=c04637524

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Technical Specifications

Page 28

Physical Dimensions

Width in/mm

Depth in/mm

Height in/mm/U

Weight lb/kg

36U 1075mm Intelligent Series Rack

23.54/597.9

44.3/1125.2

68.84/1748.6

428/195

42U 1075mm Intelligent Series Rack

23.54/597.9

44.3/1125.2

79/2006.6

451/205

42U 1200mm Intelligent Series Rack

23.54/597.9

51.19/1300.2

79/2006.6

531/241

Base (no host adapters, no drives)

Base (with two host adapters, no drives)

Base (no host adapters, no drives)

Base (with two host adapters, no drives)

Base (no host adapters, no drives)

Base (with four host adapters, no drives)

Base (with two host adapters, no drives)

Base (no host adapters, no drives)

Base (with four host adapters, no drives)

Base (no host adapters, no drives)

Base (with two host adapters, no drives)

Base (no host adapters, no drives)

Base (with four host adapters, no drives)

SAS Drive Enclosure (without drives)

(varies by type)

(varies by type)

Service Processor

37.48/17

47U 1075mm Intelligent Series Rack 23.54/597.9 44.3/1125.2 88.53/2248.7 483/220

HPE 3PAR StoreServ 8200 2N Storage

HPE 3PAR StoreServ 8200 2N Storage

HPE 3PAR StoreServ 8400 2N Storage

HPE 3PAR StoreServ 8400 2N Storage

HPE 3PAR StoreServ 8400 4N Storage

HPE 3PAR StoreServ 8400 4N Storage

HPE 3PAR StoreServ 8440 2N Storage
Base (no host adapters, no drives)

HPE 3PAR StoreServ 8440 2N Storage

HPE 3PAR StoreServ 8440 4N Storage

HPE 3PAR StoreServ 8440 4N Storage

19/483 26.6/676.1* 3.46/87.95/2 47.7/21.6

19/483 26.6/676.1* 3.46/87.95/2 48.7/22.1

19/483 26.6/676.1* 3.46/87.95/2 47.7/21.6

19/483 26.6/676.1* 3.46/87.95/2 48.7/22.1

19/483 26.6/676.1* 6.925/175.9/4 97.8/44.4

19/483 26.6/676.1* 6.925/175.9/4 99.8/45.3

19/483 26.6/676.1* 3.46/87.95/2 47.7/21.6

19/483 26.6/676.1* 3.46/87.95/2 48.7/22.1

19/483 26.6/676.1* 6.925/175.9/4 97.8/44.4

19/483 26.6/676.1* 6.925/175.9/4 99.8/45.3

HPE 3PAR StoreServ 8450 2N Storage

HPE 3PAR StoreServ 8450 2N Storage

HPE 3PAR StoreServ 8450 4N Storage

HPE 3PAR StoreServ 8450 4N Storage

HPE 3PAR StoreServ 8000 SFF(2.5in)

19/483 26.6/676.1* 3.46/87.95/2 47.7/21.6

19/483 26.6/676.1* 3.46/87.95/2 48.7/22.1

19/483 26.6/676.1* 6.925/175.9/4 97.8/44.4

19/483 26.6/676.1* 6.925/175.9/4 99.8/45.3

19/483 24.8/630.7 3.46/87.95/2 33.5/15.2

SAS Drive Enclosure (without drives)

HPE 3PAR StoreServ 8000 LFF(3.5in)

19/483 24.9/631.4 6.89/175/4 42.9/19.5

SFF SAS drive with carrier 0.78/19.9** 896/227.7 3.42/86.85** 0.7/0.32

LFF SAS drive with carrier 4.36/110.84** 8.67/220.26 1.18/30.0** 1.9/0.86

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Technical Specifications

Page 29

Power Requirements

Input Voltage (VAC)

100 - 240 VAC

Frequency (Hz)

50 - 60

Component

Idle (watts / BTU/hr)

Transactional (watts / BTU/hr)

Node Pair (
no drives, no add-on host adapters

398 / 1357

Node Pair (
no drives, no add-on host adapters

363 / 1238
4-port 16Gb/s Fibre Channel Adapter

18.61 / 63.5

19.13 / 65.3

2-port 10Gb/s iSCSI/FCoE Adapter

34 / 115.8

40 / 136.4

2-port 10Gb/s Ethernet Adapter

5.69 / 19.4

5.71 / 19.5

4-port 1Gb/s Ethernet Adapter

1.97 / 6.7

1.97 / 6.7

8000 SFF(2.5in) SAS Drive Enclosure, no drives

150 / 512 (average)

150 / 512 (average)

8000 LFF(3.5in) SAS Drive Enclosure, no drives

164 / 559 (average)

164 / 559 (average)

300GB 15K Small Form Factor HDD

6.9

600

7.3 / 25.1

600 GB 10K Small Form Factor HDD

6.3 / 21.4

7.4 / 25.2

1.2TB 10K Small Form Factor HDD

6.2 / 21.1

8.2 / 27.9

1.8TB 10K Small Form Factor HDD

7.3 / 24.8

7.5 / 25.6

2TB 7.2K Small Form Factor NL HDD

6.1 / 20.8

7.2 / 24.6

2TB 7.2K Large Form Factor NL HDD

7.5 / 25.6

10.6 / 36.1

4TB 7.2K Large Form Factor NL NDD

9.1 / 31.1

13.1 / 44.6

6TB 7.2K Large Form Factor NL NDD

11.9 / 40.7

14.3 / 48.74

8TB 7.2K Large Form Factor NL NDD

10.8 / 36.8

14.9 / 50.7

400GB Small Form Factor SSD

3.3/11.3

5.8/19.8

480GB Small Form Factor SSD

2.2 / 7.5

5.5 / 18.7

480GB Small Form Factor nonAFC SSD

3.2 / 11

7.1 / 24.4

480GB Large Form Factor nonAFC SSD

1.8 / 6.1

6.7 / 22.9

920GB Small Form Factor FIPS SSD

2.2 / 7.5

5.5 / 18.7

1920GB Small Form Factor SSD

3.5 / 11.9

8.9 / 30.5

3840GB Small Form Factor SSD

3.4 / 11.6

11.0 / 37.5

7680GB Small Form Factor SSD

13.7 / 46.74

8200 or 8400),

236 / 803

8440 or 8450),

344 / 1173

6.7 / 22.9

GB 15K Small Form Factor HDD 7.0 / 24.0

/ 23.1

3.4 / 11.6

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Technical Specifications

Page 30

Environmental Specifications

C/1,000 m)

Shipping Temperature

-30° to 60°C (-22 to 140°F). Maximum rate of change is 20°C/hr (36°F/hr)

Altitude (ft/m) max.

10,000 ft / 3,048 m

Shipping Altitude (ft/m) max.

40,000ft/ 12,192 m

Humidity

10% to 90% non-condensing

Shipping Humidity

10% to 90% non-condensing

Operating Vibration

0.25 G, Sine, 5-500 Hz, 0.1 Grms, Random 10-100Hz

Non-operating Vibration

0.5 G, 5 - 500 Hz, Sine

Operating Shock

2 G, 11ms, half-sine

Non-operating Shock

10 G, 11ms, half-sine

RRA Notice No. 2014-9 (2014.06.23) & 2014-38 (2014.06.23)

10,000 RPM

Fan Speed
(RPM)
Base

Base

Base

Base

8000
SAS Drive
Enclosure

Enclosure

Minimum

63.8

67.2

72

74

62.6

61.3

Maximum

85.4

NOTE:

KCC
GOST
C
WEEE China RoHS
EU RoHS

Operating Temperature

4

41° to 104° F (5° to 40° C) - Reduce rating by 1° F for each 1000 ft altitude (1.8°

Maximum Air Flow

Electromagnetic Compatibility

Acoustics Sound pressure level
measured per ISO 7779 specs
during normal operating fan
conditions, from a minimum of
3,000 RPM to a maximum of

Storage Base and Upgrade Node Pair - 109 CFM per enclosure
8000 SFF(2.5in) SAS Drive Enclosure - 105 CFM
8000 LFF(3.5in) SAS Drive Enclosure - 109 CFM

CISPR 22:2008/ EN55022:2010 Class A
CISPR 24:2010/ EN 55024:2010
IEC 61000-3-2:2005/ EN 61000-3-2:2006 +A1:2009 +A2:2009
IEC/ EN 61000-3-3:2008
AS/NZS CIPSR 22: 2009 Class A
CNS 13438:2006 Class A
47 CFR Part 15 Subpart b Class A
ICES-003 Issue 5 Class A
V-3/2014.04
RRA Notice No. 2014-8 (2014.06.23) & 2014-37 (204.06.23) Class A

8200/8400
2N Storage

8400 4N
Storage

8440 2N
Storage

93.4 96.5 93 97

8440 4N
Storage

2U

8000 4U
SAS Drive

88

Safety

IEC 60950-1:2005 (2nd Edition); Am 1:2009
EN 60950-1:2006 +A11:2009+A12
EN 62479:2010
CNS 14336-1 2nd Edition
UL 60950-1 2nd Ed.
CAN/CSA C22.2 No. 60950-1

4 Specifications are subject to change without notice.

Certifications / Markings

cTUVus Mark
TUV T-mark (EN 60950)
CE Mark
FCC Class A
IC Class A

-R

-Tick

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Technical Specifications

Page 31

BSMI Class A

VCCI Class A

QuickSpecs

HPE 3PAR StoreServ 8000 Storage

Summary of Changes

Page 32

Date

Version History

Action

Description of Change

15-Aug-2016

From Version 9 to 10

Added

Added DAC cables support

15-Apr-2016

From version 7 to 8

Changed

Updated SSD descriptions

8-April-2016

From version 6 to 7

Changed

Changes made throughout the QuickSpecs

Added optical splitter cables (K2Q46A, K2Q47A)

16-Feb-2016

From Version 4 to 5

Changed

Changes made throughout the QuickSpecs

02-Oct-2015

From Version 2 to 3

Added

Added The HPE StoreFront Remote SaaS Portal

28-Sept-2015

From Version 1 to 2

Changed

Changes made throughout the QuickSpecs

24-Aug-2015

Version 1

Created

Create first version

Sign up for updates

© Copyright 201
subject to change without notice. The only warranties for
services are set forth in the express warranty statemen

Nothing herein should be construed as constituting an additional warranty.
shall not be liable for technical or editorial errors or omissions contained herein.

c04607918

07-Jun-2016 From Version 8 to 9 Changed Added new drives (7.68TB SSD, 8TB NL FE HDD)

Added Smart SAN

31-March-2016 From version 5 to 6 Changed Added new drives (2TB NL FE HDD, 8TB NL HDD)

Added CSI section

04-Dec-2015 From Version 3 to 4 Changed Added HPE 3PAR StoreServ 8200 Converged File/Block

Starter Kit. Added new drives (400GB SSD, 3.84TB FE SSD,
4TB NL FE HDD).

6 Hewlett Packard Enterprise Development LP. The information contained herein is

Hewlett Packard Enterprise products and

ts accompanying such products and services.

Hewlett Packard Enterprise

- 15247 - Worldwide - V10 – 15-August-2016