QuickSpecs
HPE 10Gb SFP+ Transceivers
Overview
Page 1
HPE 10Gb SFP+ Transceivers
Models
HP BladeSystem c-Class 10Gb SFP+ SR Transceiver
455883-B21
HP BladeSystem c-Class 10Gb SFP+ LR Transceiver
455886-B21
HP BladeSystem c-Class 10Gb SFP+ LRM Transceiver
455889-B21
QuickSpecs
10Gb SFP+ Transceivers
Technical Specifications
2
HP BladeSystem c-
standard, providing
Ports
1 LC 10-GbE port (IEEE 802.3ae Type 10Gbase-SR); Duplex: full only
Connectivity
Connectivity Connector
type
LC
Wavelength
850 nm
Physical
Dimensions
2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Environment
Weight
Transceiver form factor
SFP+
Operating temperature
32ºF to 158ºF (0ºC to 70ºC)
Operating relative humidity
0% to 85%, noncondensing
Non-operating temperature
-4ºF to 185ºF (-40ºC to 85ºC)
Altitude
Up to 10,000 ft. (3 km)
Electrical
Power consumption typical
0.6w
Power consumption
M
Cabling
Cable Type
62.5/125 μm or 50/125 μm (core/cladding) diameter,
m multimode cable @ 2000
MHz/km
Cable length
2- 300 m
Fiber type
Multi-Mode
Notes
For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish.
Angled Physical Contact (APC) is not recommended.
Services
For details about services and response times in your area, please contact your local
Hewlett Packard Enterprise sales office.
HP BladeSystem c-
Ports
1 LC 10-GbE port (IEEE
Class 10Gb SFP+
SR Transceiver
(455883-B21)
HPE
A 10-Gigabit
transceiver in
SFP+ form-factor
that
supports the 10Gigabit SR
10Gigabit
connectivity up to
300 m on
multimode fiber.
characteristics
characteristics
0.04 lb. (0.02 kg)
0.8w
aximum
graded-index, low metal content, multimode fiber optic,
complying with ITU-T G.651 and ISO/IEC 793-2 Type
A1b or A1a, respectively.
Maximum distance:
• 2-26 m with 62.5 μm multimode cable @ 160
MHz/km
• 2-33 m with 62.5 μm multimode cable @ 200
MHz/km
• 2-66 m with 50 μm multimode cable @ 400
MHz/km
• 2-82 m with 50 μm multimode cable @ 500
MHz/km
• 2-300 m with 50 μ
Page
QuickSpecs
HPE
10Gb SFP+ Transceivers
Technical Specifications
Page 3
Class 10Gb SFP+
standard, providing
802.3aq Type 10Gbase-LR);
Duplex: full only
Connectivity
Connector type
Wavelength
1310 nm
Physical
Dimensions
2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19 cm)
Environment
Weight
0.04 lb. (.02 kg)
Transceiver form factor
SFP+
Operating temperature
32ºF to 158ºF (0ºC to 70ºC)
Operating relative humidity
0% to 85%, noncondensing
Non-operating/Storage
temperature
-4ºF to 185ºF (-40ºC to 85ºC)
Altitude
Up to 10,000 ft. (3 km)
Electrical
Power consumption typical
0.9 w
Power consumption
M
1 w
Cabling
Cable type
Low metal content, single-mode fiber-optic, complying
•
Cable length
2m to 10km
Fiber type
Single Mode
Notes
Conditioning patch cord cables are not supported.
For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish.
Angled Physical Contact (APC) is not re
Services
For details about services and response times in your area, please contact your local
Hewlett Packard Enterprise sales office.
HP BladeSystem c-
Ports
1 LC 10-GbE port (IEEE
802.3aq Type 10Gbase
LRM); Duplex: full only
Connectivity
Connector type
LC
Wavelength
1310 nm
Physical
Dimensions
2.19(d) x 0.54(w) x 0.47(h) in. (5.57 x 1.38 x 1.19cm)
Environment
Weight
Transceiver form factor
LR Transceiver
(455886-B21)
A 10-Gigabit
transceiver in
SFP+ form-factor
that
supports the 10Gigabit LR
10Gigabit
connectivity up to
10 km on singlemode
fiber.
LC
characteristics
characteristics
aximum
Class 10Gb SFP+
LRM Transceiver
(455889-B21)
-
A 10-Gigabit
transceiver in
SFP+ form-factor
that
supports the 10-
characteristics
Gigabit
LRM standard, for
10-
with ITU-T G.652 and ISO/IEC 793-2 Type B1.
Maximum distance:
2m-10km with 9/125 μm single-mode cable
commended.
0.04 lb. (.02 kg)
SFP+
QuickSpecs
10Gb SFP+ Transceivers
Technical Specifications
Page 4
Gigabit
Operating temperature
Operating relative humidity
Non-operating/Storage
temperature
Altitude
Up to 10,000 ft. (3 km)
Electrical
Power consumption typical
0.7 w
Power consumption
maximum
1 w
Cabling
Cable type
1500/500 MHz*km
Cable length
0.5m to 220m
Fiber type
Multi-Mode
Notes
For OM3 cable (50 μ
cord is not required. Other multimode cables may require mode
cords to achieve the maximum distances listed above.
For fiber patch cords, use Ultra Physical Contact (UPC) surface termination/polish.
Angled Physical Contact (APC) is not recommended
Services
For details about services and response times in your area, please contact your local
Hewlett Packard Enterprise sales office.
connectivity up to
220 m on legacy
multimode fiber.
HPE
32ºF to 158ºF (0ºC to 70ºC)
0% to 85%, noncondensing
-4ºF to 185ºF (-40ºC to 85ºC)
characteristics
62.5/125 μm or 50/125 μm (core/cladding) diameter,
graded-index, low metal content, multimode fiber optic,
complying with ITU-T G.651 and ISO/IEC 793-2 Type
A1b or A1a, respectively (a mode conditioning patch
cord may be needed in some multimode fiber
installations).
Maximum distance:
• 0.5-220m with 62.5 μm multimode cable @
160/500 MHz*km
• 0.5-220m with 62.5 μm multimode cable @
200/500 MHz*km
• 0.5-100m with 50 μm multimode cable @
400/400 MHz*km
• 0.5-220m with 50 μm multimode cable @
500/500 MHz*km
• 0.5-220m with 50 μm multimode cable @
m multimode @ 1500/500 MHz/km), a mode conditioning patch
-conditioning patch
QuickSpecs
HPE
10Gb SFP+ Transceivers
Summary of Changes
5
Date
Version History
Action
Description of Change
09-Sep-2016
From Version 1 to 2
Changed
Technical Specifications section was updated
26-Aug-2016
Version 1
Created
New QuickSpecs
Sign up for updates
© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is subject to
change without notice. The only warranties for Hewlett Pa
express warranty statements accompanying such products and services. Nothing herein should be construed as
constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for t
omissions contained herein.
c05130285
- 15625 - Worldwide – V2 - 09-September-2016
ckard Enterprise products and services are set forth in the
echnical or editorial errors or
Page
Loading...