Page 1
f870g
Car Camcorder
User Manual
Page 2
1
Contents
About this Guide ........................................................................... 3
FCC Statement .............................................................................. 3
WEEE Notice .................................................................................. 4
CE Regulatory Notice .................................................................... 4
Battery Warning ............................................................................ 4
Notes on Installation .................................................................... 5
Caution ......................................................................................... 6
1 Introduction ................................................................... 7
1.1 Features ............................................................................ 7
1.2 Package Contents ............................................................. 7
1.3 Product Overview .............................................................. 8
2 Getting Started .............................................................. 9
2.1 Storage Media ................................................................... 9
2.1.1 Insert the Memory Card ........................................ 9
2.1.2 Remove the Memory Card ..................................... 9
2.2 Installing in Vehicles .......................................................10
2.2.1 Mount to Windshield ...........................................10
2.2.2 Adjust the device position ...................................11
2.3 Connecting to Power .......................................................12
2.4 LED Indicator ...................................................................14
2.5 Powering the Camcorder On / Off ...................................15
2.5.1 Auto Power On/Off ..............................................15
2.5.2 Manual Power On/Off ..........................................15
2.5.3 Reset ...................................................................15
2.6 Initial Settings .................................................................16
2.6.1 Set Time zone .....................................................16
2.6.2 Set the Date / Time .............................................18
3 Using the Car Camcorder ............................................... 19
3.1 Automatic Record ...........................................................19
3.1.1 The Recording Screen..........................................20
Page 3
2
3.1.2 Emergency Recording .........................................22
3.2 Add Speed Point ..............................................................23
3.3 Picture in Video ...............................................................23
3.4 Driving Safety .................................................................24
3.4.1 Speed Cam Alert ..................................................24
3.4.2 Speed Limit Alert .................................................25
3.5 Parking Mode ..................................................................26
3.5.1 Using embedded battery of car camcorder .........26
3.5.2 Using car’s battery with ACC cable connected. ....28
3.5.3 Connect with power bank ....................................28
3.5.4 Collision Detection ..............................................29
3.5.5 Driver Fatigue Alert .............................................29
3.5.6 LDWS ...................................................................30
3.5.7 FCWS ...................................................................31
3.5.8 2 GRID FUNCTION CHART .....................................32
3.6 Playback Videos and Photos ...........................................33
3.7 The Playback Screen .......................................................34
3.8 Deleting Files ..................................................................35
4 Adjusting the Settings .................................................. 36
4.1 Using the Menu ...............................................................36
4.2 Menu Items .....................................................................36
5 Connecting to Other Devices ......................................... 40
5.1 Connecting to the Computer ...........................................40
5.2 Connecting to TV .............................................................41
6 Installing the Software ................................................. 42
7 SuperCar ...................................................................... 43
8 Specifications .............................................................. 44
Page 4
3
About this Guide
The content in this document is for information purpose and is subject to
change without prior notice. We have made every effort to ensure that
this User Guide is accurate and complete.
However, no liability is assumed for any errors or omissions that may
have occurred.
The manufacturer reserves the right to change the technical
specifications without prior notice.
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generate, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate this equipment.
Page 5
4
WEEE Notice
Disposal of Waste Electrical and Electronic Equipment and/or Battery
by users in private households in the European Union
This symbol on the product or on the packaging indicates
that this cannot be disposed of as a household waste. You
must dispose of your waste equipment and/or battery by
handling it over to the applicable take-back scheme for the
recycling of electrical and electronic equipment and/or
battery. For more information about recycling of this
equipment and/or battery, please contact your city office,
the shop where you purchased the equipment or your
household waste disposal service. The recycling of
materials will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health
and environment.
CE Regulatory Notice
The product herewith complies with the requirements of the Low Voltage
Directive 2014/35/EU, the EMC Directive 2014/30/EU, battery directive
2006/66/EC, the R&TTE Directive 1999/5/EC and the RoHS Directive
2011/65/EC.
Battery Warning
Never dismantle, crush, or pierce the battery, or allow the battery
to short-circuit. Do not expose battery being placed in high
temperature environment, if battery leaks or bulges, stop continue
to use.
Always charge using the system. Risk of explosion if battery is
replaced by an incorrect type.
Keep the battery out of reach of children.
Batteries may explode if exposed to open fire. Never dispose of
batteries in a fire.
Never replace the battery on your own; have the dealer do it for
you.
Disposed of used batteries observing local regulations.
Page 6
5
Notes on Installation
1. Please measure the front windshield viewing area, make sure not to
block driver's front view, install the camcorder below the rearview
mirror (the central, higher right position of the front windshield). And
we recommend that the sky and the land occupied by the screen
50%, fix the car holder and then adjust the camcorder so that the
lane is aligned with the screen. Proper installation enables the
camcorder to maximize the efficiency also can enhance the accuracy
of LDWS.
2. Make sure that the lens is within the wiping range of the windscreen
wiper to ensure a clear view even when it rains.
3. Do not touch the lens with your fingers. Finger grease may be left on
the lens and will result in unclear videos or pictures. Clean the lens
on a regular basis.
4. Do not install the camcorder on a tinted window. Doing so may
damage the tint film.
5. Make sure that the installation position is not hindered by the tinted
window.
6. This product is suitable for light windshield or light color
heat-resistant film windows , it will affect video quality if install it on
the dark windows or dark heat-resistant film windows.
7. Use the products of the attached power charger only, please do not
use other brand power charger, in order to avoid equipment burn or
cause the battery explosion.
8.
We have provided 2 mounting brackets with this HP Car
Camcorder. The suction cup bracket is designed for temporary
mounting and will require periodic re-installation. The adhesive
bracket is designed for one time and long term installation. We
recommend using the adhesive bracket if permanent installation is
desired. Please install the bracket on the best open-field view. Do
NOT install the bracket in a location that may obstruct your field of
view and impact driving safety. HP or our authorized HP partners are
NOT liable for any damages or data loss due to improper bracket
mounting or suction cup bracket losing seal and dropping.
Page 7
6
Caution
Due to local laws and vehicles safety considerations, do not
operate the camcorder while driving.
Set up time zone, time and date accurately before you use this
camcorder.
Please use SuperCar software under the condition that Electronic
Map are functioning normally.
The firmware function in the camcorder is for reference only,
drivers are advised to exercise discretion based on actual road
conditions.
The results of GPS positioning are only for reference, and should
not affect the actual driving situation. The camcorder also cannot
ensure the positioning accuracy.
GPS positioning accuracy may differ depending on weather and
location such as high buildings, tunnels, undergrounds, or forests.
GPS satellite signals cannot pass through solid materials (except
glass). Tinted window will also affect the performance of the GPS
satellite reception.
GPS reception performance on each camcorder may differ. The
camcorder cannot determine the accuracy of the positioning results
from different hardware.
The values displayed in this camcorder, such as speed and
position, may be inaccurate due to the influence of surrounding
environment. They are for your reference only.
This product is used only for non-commercial use, within the
maximum limits permitted by applicable law. We do not take any
responsibilities for the loss of use of the product.
This camcorder gets warm when in use; this is normal.
Improper use or operation of the product may result in damage of
the product or its accessories and void the warranty.
HP Inc. is NOT responsible for the loss of any data/content during
operation.
Before you start using the product, it is assumed that you
agree to the above statement.
Page 8
7
1 Introduction
Thank you for purchasing this advanced Car Camcorder. This product is
specifically designed for real time video recording when driving. It also
supports a HP rear camera. You might ask distributor for further
information.
1.1 Features
• SONY Sensor, low light enhancement
• Full HD 1920*1080
• 3.0" TFT-LCD color screen
• 155° Wide angle lens
• Collision Detection, when a collision is detected, the camcorder will
automatically trigger the emergency recording
• Parking Mode (Motion detection, Vibration detection)
• Multifunction traffic safety reminder
1.2 Package Contents
The package contains the following items. In case there is any missing or
damaged item, contact your dealer immediately.
Car camcorder Bracket X 2 CD-ROM
Quick start guide Car charger
Rear Camera
(option)
Note:
We recommend using the adhesive bracket if permanent installation is desired. Do NOT install the
bracket in a location that may obstruct your field of view and impact driving safety. HP or our
authorized HP partners are NOT liable for any damages or data loss due to improper bracket
mounting or bracket losing seal and dropping.
Page 9
8
1.3 Product Overview
No.
Item
No. Item
1 LED Indicator
9 Wide Angle Lens
2 LCD Color Screen
10 Reset
3 Menu / Back Button ( / )
11 Microphone
4 Playback / Up Button ( / )
12 Power Switch
5 Snapshot / Down Button ( / )
13 Power Connector Port
6
Emergency Recording / Confirm
Button ( /
OK
)
14 Memory Card Slot
15 HDMI Connector Port
7
Switch Camera Button ( / 2CH)
16
Rear camera connector port
(option)
8 Speaker
17 Bracket Socket
Note:
Please press the button (3~7) according to the diagram notice shown on screen.
Page 10
9
2 Getting Started
2.1 Storage Media
2.1.1 Insert the Memory Card
Insert memory card with the pins facing forward and the screen of the
camcorder facing forward too, see the picture as below:
2.1.2 Remove the Memory Card
If the camcorder is power on, please power off first and wait for the
procedure of switching off the camcorder completed before removing
the memory card.
Note:
1. Do not remove or insert the memory card when the camcorder is turned on. This may damage the
memory card.
2. Support SDHC class 10 and memory storage 8GB or above (support up to 32GB).
3. Please format the micro SD cards before the initial use. The formatted file type for this camcorder
is FAT32 file.
Page 11
10
2.2 Installing in Vehicles
2.2.1 Mount to Windshield
1. Push the mount into mount slot on top of device,
until a click sound is heard.
2. Peel off the protective plastic sheet from the
adhesive bracket.
3. Place and press down the bracket firmly
onto your windshield. Make sure the base
is securely locked in place.
Page 12
11
2.2.2 Adjust the device position
1. Loose the knob to swivel the
device vertically or
horizontally.
2. Then tighten the knob to make sure the device is securely locked in
place.
Knob
Page 13
12
2.3 Connecting to Power
Use only the supplied car charger to power up the camcorder and charge
the built-in battery.
1. Connect one end of the car charger to the USB connector of the
camcorder. USB port input: DC 5V / 1A.
2. Plug the other end of the car charger to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically powers on. Car charger input: DC 12 / 24V.
Note:
Please take note if the environment temperature reaches 45°C or above, the car charger still can
supply power to camcorder, but it may not charge the battery. This is characteristic of Lithium
polymer battery and is not a malfunction.
Page 14
13
Battery Status Indicator:
Icon Description
Full battery power.
2/3 battery power.
1/3 battery power.
Out of battery power.
Battery is charging.
Connect the car charger to charge the battery, battery
is fully charged.
Note:
1. Use the products of the attached car charger only, please do not use other brand car charger, in
order to avoid equipment burn or cause the battery explosion.
2. Please take note if the environment temperature reaches 45°C or above, the car charger can still
supply power to camcorder, but it will not charge the Lithium-ion battery. This is the characteristic of
Li-polymer and is not a malfunction.
Low Voltage:
Note:
If the camcorder is connected to the car charger and turned on, and the screen displays a charging
reminder symbol such as the image above, it means that the available voltage is too low. Please wait
for a few minutes until the charging reminder symbol disappears before entering the video recording
mode to prevent invalid recording or file damage.
Page 15
14
2.4 LED Indicator
Status Explanation LED Indicator Color
Power off, battery
charging
Red
Power off, battery full
charged
LED light off
Power on, battery
charging
Red
Power on, battery full
charged
Green
Standby / Standby and
screen off
Green
Recording/ Recording
and screen off
Flash red
Page 16
15
2.5 Powering the Camcorder On / Off
2.5.1 Auto Power On/Off
If the camcorder is connected to the vehicle power supply, once start the
car engine, the camcorder will automatically power on and start
recording.
Once the vehicle engine shuts down, the camcorder automatically saves
the recording and turns off the power within 10 seconds.
2.5.2 Manual Power On/Off
To manually turn on the power, press the POWER
button.
To turn off, press and hold the POWER button for
at least 2 seconds.
2.5.3 Reset
Use a pin or paper clip to insert and hold the Reset
hole for 5 seconds to reset the device.
Page 17
16
2.6 Initial Settings
Before using the camcorder, we recommend you setup the correct Time
zone, Date and Time.
Note:
Please note that if you press the button during recording, the system will stop recording and
enter OSD menu. Make sure the recording is already stopped then continue operating the menu.
2.6.1 Set Time Zone
To set the time zone, do the following:
1.
Press the button to enter the OSD menu.
2.
Press the or button to select
Set Time Zone
, and then
press the button for entering function menu.
3.
Press the or button to set the current time zone, and
then press the button to complete setting.
4.
Press the button to return to recording screen.
Page 18
17
Note:
1. If
Time Sync.
is on, camcorder clock will be calibrated via satellite clock signal based on
Set Time
zone
.
2. If satellite positioning is not successful, camcorder clock will run based on user defined time.
Page 19
18
2.6.2 Set the Date / Time
To set the correct date and time, do the following:
1.
Press the button to
enter the OSD menu.
2.
Press the or
button to select Date /
Time, and then press the
button for entering
function menu.
3.
Press the or button to adjust the value, and then press
the button to set the next field.
4.
Repeat step 3 until the date and time setting is completed.
Note:
To ensure the accuracy of the video file time, please reset the date and time when the battery power
runs out or when not in use over 7 days.
Page 20
19
3 Using the Car Camcorder
3.1 Automatic Record
Once start the car engine, the camcorder will automatically power on and
start recording.
Recording will automatically stop when the engine is switched off.
Note:
1. Some vehicle power supply would not turn on / off automatically with the car engine start, if the
camcorder cannot automatically power on/off with the car engine, please manually connect the
power supply with the vehicle power, and then power on, or manually power off the camcorder and
then release the connector with the car power supply.
2. It can be configured to save a video file for every 30 seconds, 1 or 3 minutes of recording.
3. All the videos and photos are saved in the memory card, if memory card is full, loop recording will
generally overwrite the oldest video file.
Page 21
20
3.1.1 The Recording Screen
No.
Icon Item Description
1
00: 1 0
Recording Duration Indicates the video current duration.
2
Date / Time
Indicates the current recording date
and time.
3
Menu Button
During video recording, press the
button to enter the OSD menu.
4
Add Speed Point
Button
During video recording, press the
button to add a speed cam
point.
5
PIV (Picture in
Video) Button
Press to capture video screen
shots from the front camera.
6
Emergency
Recording Button
During video recording, press the
OK
button to enter emergency
recording mode.
7
Switch Camera
Button
Press to switch VIV screen.
(Rear Camera is not included in
Page 22
21
standard package. Please contact
distributor for further information.)
8
Satellite Positioning
icon
Indicates the strength of satellite
positioning. If the icon shows in red
on screen, it indicates that the
camcorder cannot complete the
satellite positioning.
9
Speed Current driving speed.
10
Voice Record
icon
Indicates voice recording sets as off,
the sound will not be recorded.
11
Resolution
icon
Indicates the video resolution.
12
TF Card
When a compatible micro SD memory
card is inserted, the LCD displays .
If no memory card is inserted or if
the memory card is damaged /
incompatible, the LCD displays
13
Battery Power
icon
Indicates battery or camcorder
charging status.
14
VIV (Video in Video)
Indicates rear camera recording
screen.
(Rear Camera is not included in
standard package. Please contact
distributor for further information.)
Page 23
22
3.1.2 Emergency Recording
To Start the Emergency Recording, do the following:
1. During Video Recording,
press the
OK
button to
enter emergency recording
mode, the “Emergency”
message will be shown
immediately on the upper
left corner of the screen,
and the recorded file will
be protected.
2. The emergency video recording length is same as the recording
interval setting. When the emergency recording length reaches the
setting, the system will return to the general recording mode.
Note:
1. If the
Collision Detection
function is enabled and a collision is detected, the camcorder will
automatically trigger the emergency recording.
2. The emergency file is created as a new file and save in Event folder, which will be protected to avoid
being overwritten by normal loop recording. The emergency video folder will occupy 40% of available
memory card capacity. For example, if you use 8GB memory card, about 3.2GB memory space will be
saved for emergency files. When the emergency video folder is full, the oldest emergency file will be
automatically deleted by the newest emergency file.
Page 24
23
3.2 Add Speed Point
You may customize speed cam positions in this product.
1. When the GPS positioning is completed , press to update speed
camera points.
2. This product features a capacity of 200 speed cam positions. In case
you are trying to add more than that the system prompts with
message "Speed Position is full".
Note:
You may delete custom speed cam positions by selecting the
Delete Last Position
or
Delete All
Position
option from the
Speed Position Management
menu. Please note that all of your existing
speed cam positions are deleted once the
Delete All Position option
is selected. Make sure you are
ready to recreate your custom speed cam positions before running this option.
3.3 Picture in Video
You can also use this camcorder to take snapshots of the current scene.
1. In recording status, press
to capture recording
screen shots from the front
lens.
2. When the icon shows
in the central of screen, it
means the screenshots is
completed.
Note:
1. The screen shots image resolution quality is depending on the video resolution setting.
2. The picture resolution is limited by the speed of the target object and changes in ambient lighting.
The photograph function is better used for taking still pictures in accident scenes or when the car is
stopped to wait for a traffic light.
3. It is available only for the front camera if user wants to take pictures during recording.
Page 25
24
3.4 Driving Safety
Note:
1. The
Driving Safety
function is limited to triggering no more than two alarms at the same time. If a
voice and alert message have been triggered, any other alarm will be ignored until either of the two is
settled.
2. Satellite positioning must be completed before functions such as
Speed Cam Alert, Speed Position
Management, Speed Limit Alert, LDWS
and
FCWS
to be enabled. Be sure to check that Satellite
positioning has been completed prior to using the product.
3. The detections of
LDWS
and
FCWS
may be inaccurate when used in rain, at night or in environments
of insufficient lighting. Drivers are advised to exercise discretion based on actual road conditions.
3.4.1 Speed Cam Alert
If the Speed Cam Alert function is enabled, once your car’s location is
determined by GPS and approaches a speed cam, this product produces
audible alert and screen message.
To enable the Speed Cam Alert, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select Speed Cam Alert, and then
press the
OK
button for entering function menu.
3. Press the / button to select On, and then press the
OK
button to enable the
function.
4. Press the button to
return recording screen.
5. The alarm screen turns red
to remind you to slow down
if you are driving faster
than the speed limit.
Note:
The speed cam alert function must have the speed cam datum from the country you use. The function
will be void if the product is used in any other countries. Please consult with the shop you purchased if
the function is void. There is no guarantee the speed cam datum will be included for the worldwide
countries.
The following driving safety function is for reference only. Drivers are advised
to exercise discretion based on actual road conditions.
Page 26
25
3.4.2 Speed Limit Alert
If the Speed Limit Alert function is enabled, this product produces
audible alert and screen message once your car’s location is determined
by GPS and its running speed exceeds the set limit.
To set the Speed Limit Alert, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select Speed Limit Alert, and then press
the
OK
button for entering function menu.
3. Press the / button to set up a Speed Limit Alert to trigger
this product’s alarm [Off / 50 ~ 200 km/h (30~125 mph)], and then
press the
OK
button to complete setting.
4. Press the button to return recording screen.
5. The alarm screen turns red to remind you to slow down if you are
driving faster than the speed limit.
Page 27
26
3.5 Parking Mode
To monitor the vehicle when it is parked, you can activate Motion
Detection, or Vibration Detection.
Follow the steps below to change the settings for Parking Mode:
1.
Press the button to
enter the main menu.
2.
Press the or
button to select
Parking
Mode
, and then press the
button to confirm.
3.
Press the or button to configure Parking Mode (Motion
Detection / Vibration Detection / Off), and then press the
button to complete setting.
4.
Press the button to return to recording screen.
3.5.1 Using embedded battery of car camcorder
• Motion Detection:
- If disconnected external power supply when the camcorder is
powered on, the system alert message “Press OK to power off
or enter Parking mode after 10 sec.” This means the system
will enter Motion Detection automatically in 10 seconds, and
then LCD screen turns off (the camcorder will turn off the screen
temporarily, but still in standby detection status. Press any
button to turn on the operation screen and resume to normal
loop recording).
- In the Motion Detection mode, when the camcorder detects any
motion in front of lens, the automatic record will be activated.
- In this mode, when the camcorder detects any motion in front of
lens, the video recording will be triggered and the event will be
recorded for 10 seconds (per file). If the event lasts more than
10 seconds, the camcorder will keep recording up to 2 minutes.
Page 28
27
- In this mode, the camcorder is in standby mode until event
happens. This mode will consume more battery power.
- To disable this function, in the standby mode or motion detection
recording, press any key to wake up the screen, and resume to
normal loop recording; or when the car engineer is started again,
it will be back to normal loop recording.
• Vibration Detection:
- If disconnected external power supply when the camcorder is
powered on, the system alert message “Press OK to power off or
enter Vibration Detection after 10 sec.” This means the system
will power off and enter Vibration Detection automatically in 10
seconds.
- Once Vibration Detection Mode is triggered, when the camcorder
detects any vibration, it will automatically power on and start
recording, the event will be recorded for 60 seconds (per file).
- In this mode, car camcorder is powered off until event happens.
This mode is more power saving.
- To disable this function, in the vibration detection recording, press
any key to wake up the screen, and resume to normal loop
recording; or when the car engineer is started again, it will be back
to normal loop recording.
Note:
1. When Motion Detection or Vibration Detection triggers, the camcorder records
events taken by front camera only.
2. If battery in a fully charged condition, it can record about 30 minutes video in
Motion Detection mode. As the camcorder is used, the battery storage capacity will
decrease gradually. This is a normal phenomenon for the battery.
3. The video files taken in Motion Detection mode will be saved in normal recording
folder.
4. The video files taken in Vibration Detection mode will be saved in Event recording
folder, which will not be overwritten by normal video files.
Page 29
28
3.5.2 Using car’s battery with ACC cable connected.
• Motion Detection:
- In normal loop recording mode, press and hold POWER for 3
seconds, The screen will show message “Press OK to power off
or enter Motion Detection after 10 sec.”
- To disable this function, press any key to wake up the screen, and
resume to normal loop recording; or when the car engine is
started again, manually power off and power on the car
camcorder, it will be back to normal loop recording.
• Vibration Detection:
- Not available for this function
3.5.3 Connect with power bank
• Motion Detection:
- In normal loop recording mode, unplug car adapter and connect
power bank, press and hold POWER key for 3 seconds, The screen
will show message “Press OK to power off or enter Motion
Detection after 10 sec.”
- To disable this function, press any key to wake up the screen, and
resume to normal loop recording; or when the car engine is
started again, unplug the power bank, and connect car adapter, it
will be back to normal loop recording.
• Vibration Detection:
- Not available for this function
Page 30
29
3.5.4 Collision Detection
If the Collision Detection function is enabled, this camcorder begins
emergency recording once it detects any collision. Sensitivity of the
Collision Detection function is set to Normal by default, if user wants to
change the settings of Collision Detection, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select Collision Detection, and
then press the
OK
button for entering function menu.
3. Press the / button to change the sensitivity of this
camcorder’s collision detection (High Sensitivity / Normal
Sensitivity / Low Sensitivity / Off), and then press the
OK
button for entering function menu.
4. Press the button return to recording screen.
3.5.5 Driver Fatigue Alert
If the Driver Fatigue Alert function is enabled, this product produces
audible alert and screen message one hour after it has begun recording
and repeats the alerts every half hour afterwards.
To enable the Driver Fatigue Alert, do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select Driver Fatigue Alert, and
then press the
OK
button for entering function menu.
3. Press the / button to select On, and then press the
OK
button to enable the function.
4. Press the button return to recording screen.
5. This product produces audible alert and screen message when
Driver Fatigue Alert activates.
Page 31
30
3.5.6 LDWS
Once your car’s location is determined by GPS and the LDWS function is
enabled, this camcorder produces audible alert and screen message
when you drive off of or change lanes at speeds over 70 km/h (43 mph).
To set the LDWS (Lane Departure Warning Systems), do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select LDWS, and then press the
OK
button for entering function menu.
3. Press the / button to select On, and then press the
OK
button to enable the function.
4. Press the button to return to recording screen.
5. After enabling LDWS, the screen will display traffic lane align icon in
green , please adjust the camcorder so the slash lines are
centered in the driving lane.
6. This product produces audible alert and screen message when
LDWS is activates.
Page 32
31
Note:
1. Please measure front windshield viewing area, do not block the driver's forward field of vision, and
install the camcorder below rearview mirror (upper central of the front windshield). We recommend
that the sky and the ground occupied 50 % of the video screen, install the bracket then adjust the
camcorder to make the lane is aligned to the lane alignment icon. Correct installation makes the
camcorder to maximize the efficiency and improve the accuracy of LDWS.
2. Make sure that traffic lane align icon will not be obscured other things (e.g. hood). It may cause
misjudgment if the endpoint is obscured.
3.5.7 FCWS
Once your car’s location is determined by GPS and the FCWS function is
enabled, this camcorder produces audible alert and screen message
when you drive at speeds over 60 km/h (37 mph) and are less than 20 m
away from the car in front of you. If the camcorder not completes the
satellite positioning, and the leading vehicle distance below 20 meters, it
will also produce a warning screen and beep reminder.
To set the FCWS (Forward Collision Warning System), do the following:
1. Press the button to enter the OSD menu.
2. Press the / button to select FCWS, and then press the
OK
button for entering function menu.
3. Press the / button to select On, and then press the
OK
button to enable the function.
4. Press the button to return recording screen.
5. This product produces audible alert and screen message when
FCWS is activates.
Page 33
32
3.5.8 2 GRID FUNCTION CHART
When the camcorder is recording, press Power button will enter 2
GRID FUNCTION CHART in the LCD screen, users can check vehicular
informations here. Press Power button once again will go back into
your recording.
No. Item No. Item
1 Driving Speed 2 Driving direction
Note:
Driving Speed and Driving Direction are only applicable when satellite positioning of
the camcorder is ready; otherwise, they will be displayed in gray scale only. Satellite
positioning function is dependent on the model purchased.
Page 34
33
3.6 Playback Videos and Photos
1.
If recording is in progress, press
the
/
button to
stop recording and enter the
playback menu.
2.
Press the or
button to select the file category
that you want to browse and
press the button to display thumbnail images of the
recorded video or photo files.
3.
Use the or to select the video or photo you want to
playback, and press button to confirm your selection.
Page 35
34
3.7 The Playback Screen
No.
Item Description
1 File name File name
2
Duration/ Total
recorded time
Indicates the video elapse time/ Indicates total recorded
time
3 Return
Press the button to return preview screen of
video or picture. Press the button repetitively to
return recording screen.
4
Previous File
Button
Press button to view previous file.
5 Next File Button Press button to view next file.
6
Playback/ Pause
button
Press the
OK
button to play or pause the video.
7
Lens Switch
Button
In playback mode, press button to switch files
with dual lens recording file. (Rear Camera is optional.)
8 Stamp print Indicates date and time stamp
9 File Current file / total file number
10 TF Card
When a compatible micro SD memory card is inserted, the LCD
displays
.
If no memory card is inserted or if the memory card is
damaged / incompatible, the LCD displays
11 Battery Indicates the estimated remaining battery power.
12 Date and time Date and time of photo taking
Page 36
35
3.8 Deleting Files
To delete file(s), perform the following steps:
1.
Press the button to stop
recording and enter the main
Menu.
2.
Press the or
button to select File Deletion
and press the button to
confirm.
3.
Press the or
button to select folder and
press the button to
confirm.
4.
Use the or to
select the video or photo you want to delete, and press
button to confirm your selection.
Item Description
Delete One Delete the current selected file.
Delete All Deletes all files in this folder.
5.
Press the button to confirm deletion.
Note:
1. Deleted files CANNOT be recovered. Ensure the files you wish to preserve are backup before
deletion.
2. If the file is taken by front camera and rear camera at the same time, no matter you delete video or
picture from Front camera folder or Rear camera folder, both front camera file and rear camera file
will be deleted.
Page 37
36
4 Adjusting the Settings
4.1 Using the Menu
You can customize the general settings via the on-screen display (OSD)
menus.
1. Press the button to enter the OSD menu.
2. Press the / button to select menu item, and then press
the
OK
button for entering function menu.
3. Press the / button to select or adjust the value, and then
press the
OK
button to confirm setting.
4. Press the button to return recording screen.
4.2 Menu Items
Refer to the below table for details of main menu and function list.
Menu option Description Available option
Playback
Select the file category that
you want to view.
Video (Front camera)
Video (Rear camera)
Event (Front camera)
Event (Rear camera)
Picture (Front camera)
Picture (Rear camera)
Satellite Status
Displays the current state of
the satellite reception.
Satellite
Synchronization
If the satellite time is enabled,
the car camcorder clock will
synchronize according to the
satellite time zone you set.
When you turn on this
feature, it will display the
satellite time preferentially,
and cannot be manually
changed.
On / Off
Speed Unit
The system displays the
speed setting unit.
KM/H / MPH
Page 38
37
Menu option Description Available option
Speed Cam Alert
If the Speed Cam Alert
function is enabled, once your
car’s location is determined
by GPS and approaches a
speed cam, this product
produces audible alert and
screen message.
On / Off
Speed Position
Management
Add Speed Point:
The
satellite positioning will
manually add speed camera
location. You can add up to
200 speed camera locations
to the built-in system.
Delete Last Position:
Delete
the last speed camera point.
Delete All Position:
Delete all speed camera
point.
Add Speed Point / Delete
Last Position / Delete All
Position
Speed Limit Alert
Set a customized maximum
speed limit. When the vehicle
speed exceeds the maximum,
an audible alert is
automatically triggered and a
warning message is displayed
on the screen.
Press the / button to
set the speed limit. You can
set the off, or set speed limit
from 50 to 200km/h (30 to
125mph)
Set Time Zone
Set the time zone you are in.
Press the / button to
set the satellite time. You
may customize it between
GMT -12:00 ~ GMT +14:00
Date / Time Set the date and time.
Press the / button to
adjust the value, and then
press the
OK
button to
set the next field, and
complete setting
Language Language setting.
According to the actual
shipping regions.
Time Stamp
If the time stamp is enabled,
recording files or photos will
show the date and time.
On / Off
Page 39
38
Menu option Description Available option
Resolution Setting of video resolution.
1920 x 1080 pixels @30fps
1280 x 720 pixels @30fps
EV Setting of exposure value.
Press the / button to
set the exposure value. It can
be set between -2 ~ +2
LCD Setting
Set LCD off time. Camcorder
screen will be off after a set
time if no operation is
detected during the standby
or record mode. Press any
button will switch it on.
(Recording is not affected
when screen is off).
On/ Turn off after 7 sec / Turn
off after 1min/ Turn off after
3min
Voice Record
Setting for activating audio in
the video.
On / Off
Volume Adjust the sound volume.
Press the / button to
set the volume. It can be set
between 0 ~ 10.
Key Tone
Enable / disable power-on
sound and key tone.
On / Off
Record Interval
Save respective video files in
a length of the selected
duration.
30 sec. / 1 min. / 3 min.
Parking Mode
If one of parking mode is
activated, the camcorder will
enter parking mode 10
seconds after disconnect the
external power.
Motion Detection/ Vibration
Detection/ off
Collision Detec.
If Collision Detection is
activated, this camcorder
starts emergency recording
once it detects any collision.
High Sensitivity / Normal
Sensitivity / Low Sensitivity /
Off
Driver Fatigue Alert
When Driver Fatigue Alert is
enabled, audible alert and
screen message will be
activated 1 hour after the
camcorder
is powered on,
On / Off
Page 40
39
Menu option Description Available option
with a repetition every 30
minutes.
LDWS
Once your car’s location is
determined by GPS and the
LDWS function is enabled, this
camcorder produces audible
alert and screen message
when you drive off of or
change lanes at speeds over
70 km/h (43 mph).
On / Off
FCWS
When FCWS is activated after
satellite positioning,
camcorder will issue audible
alert and screen message
when vehicle speed is above
60 km/h (37 mph) and the
distance with the front vehicle
is less than 20m.
On / Off
File Deletion Delete the file(s).
Video (Front camera)
Video (Rear camera)
Event (Front camera)
Event (Rear camera)
Picture (Front camera)
Picture (Rear camera)
Anti-flicker
Domestic power supply varies
by area. It is recommended
that you should check the
“Table of voltage and
frequency of different
countries” for the correct
setting.
60Hz / 50Hz
Format
Format the memory card
inserted in the equipment. All
the files in the card will be
erased.
Yes / No
Default
The system reverts to the
default setting.
Yes / No
Firmware Version
Indicates the current
firmware version.
Page 41
40
5 Connecting to Other Devices
5.1 Connecting to the Computer
You can connect the camcorder to a desktop computer or notebook to
transfer or view files.
1. Connect mini USB cable to the camcorder mini USB port.
2. Connect the other end of USB cable to an available USB port of your
computer.
3. Power on the camcorder, the computer screen will show up the
message when the computer detects your camcorder, select "Open
folder to view files", or open the "Removable Disk", then users can
save the files to your computer.
Note:
1. This only indicates the camcorder can connect to the computer; mini USB cable is not included in
standard package.
2. Under dual-lens mode, the recording files will be saved separately in different folders, "F" folder is
for front camera files, "R" folder is for rear camera files.
Page 42
41
5.2 Connecting to TV
You can use HDMI cable transfer to TV to play the file.
1. Power on the camcorder.
2. Connect HDMI cable to camcorder HDMI port.
3. Connect HDMI cable to TV HDMI port.
4. Power on TV, switch TV signal input to HDMI, please operates by
camcorder / / /
OK
/
2CH
buttons.
Note:
1. It only indicates this camcorder can connect to TV, HDMI cable is not included in standard package.
2. Please make sure the camcorder power is on before using HDMI cable connecting to TV.
Page 43
42
6 Installing the Software
1. Place the attached CD ROM into the CD player.
2. If the CD does not execute automatically, please use Windows File
Manager to execute the Install_CD.exe file in the CD.
The following screen will be shown up.
3. Press the [Menu] item to start the installation process according to
the instructions on-screen.
Page 44
43
7 SuperCar
No. Item
No. Item
1 Front Camera Pl
ayback
9 File Path
2 Play / Pause
10 Browser File
3 Previous
11 File List
4 Next
12 Rear Camera Playback
5 Stop
13 Volume
6 Electronic Map
14
P
layback D
uration
/ Total
Duration
7 Compass
15 G-Sensor
8 Speed Meter
Note:
1. To display the route on Electronic Map, please make sure the internet is connected before starting
the video playback.
2. Video files of front-view camera (MOV) and GPS/G-Sensor files (NMEA) must be stored in the same
folder before starting the playback.
3. The SuperCar software is only applicable to Windows operating system.
Page 45
44
8 Specifications
Item Description
Image sensor 1/2.9” SONY sensor
Effective pixels
1920 (H) x 1080 (V)
Storage media Supports Micro SDHC, up to 32GB class 10 speed or greater
LCD display 3” LCD color TFT
Lens
Wide Angle Fixed Focus lens
Aperture: Up to F1.8
Focus range 1.5m~Infinity
Satellite System GPS
Video
Resolution: Full HD 1920 x 1080 @ 30fps
HD 1280 x 720 @30fps
Format: MOV
Still image
(Photograph)
Resolution: depends on video resolution setting
Format: DCF (JPG)
Shutter
Electronic shutter
Auto: 1/33、120~1/30 sec.
G-Sensor 3-Axis G-Force sensor
ISO Auto
White Balance Auto
Microphone
Built-in
Speaker
Built-in
Interface
Mini USB, A/V port, HDMI
Page 46
45
Item Description
Battery
Built-in Li-polymer rechargeable (This battery is NOT
replaceable)
Operating
Temperature
0° ~ 60° C
Operating Humidity 20 ~ 70% RH
Storage
Temperature
-20° ~ 70° C
Dimensions 89 x 53 x 28.5 mm
Weight Approx. 86g
Page 47
Copyright © 2017
All rights reserved.
All other marks, products or company names mentioned in this guide are
trademarks of their respective companies.
Loading...