HP E 6125G, E 6125XG Quickspecs
QuickSpecs
HPE 6125G/XG Ethernet Blade Switch
Overview
Page 1
HPE 6125G/XG Ethernet Blade Switch
The innovative features of
HPE Networking products are now available in a hybrid 1Gb/10Gb blade switch format. The HPE
6125G/XG brings the resiliency of IRF (intelligent Resilient Networking) stacking and the stability o
f the Comware operating system
to the c
-Class BladeSystem. With sixteen 1Gb downlink (server) ports, a combination of 1Gb and 10Gb uplink ports, and a 10Gb cross-
link port, the
HPE 6125G/XG reduces cost, while increasing datacenter efficiency and capability. Switches can be combined at the
enclosure, rack or datacenter level into a single virtual switch, and managed through a single IP address. Comware OS provide
s a
common level of features, service and security levels from edge to core. And all network ele
ments can be managed through IMC
(Intelligent Management Center) providing comprehensive single pane provisioning of the entire network. Truly versatile, the
HPE
6125G/XG supports IPv6, full layer 3 routing and distributed trunking. If you're looking for a
switch that delivers excellent investment
protection, flexibility, and scalability for mixed bandwidth applications, the 6125G/XG is the optimal choice for any data center.
Figure 1 HPE 6125G/XG Blade Switch
1. Unit ID (UID) LED
6. Reset button
2. Ejector lever
7. 10/100/1000Base-T Ethernet port LED
3. SFP+ port
8. Console port
4. Release tab
9. SFP+ port LED
5. 10/100/1000Base
-T auto-sensing Ethernet port
10. Health LED
Models
HPE
6125G/XG Ethernet Blade Switch 658250-
B21
HPE
6125G/XG Ethernet Blade Switch with TAA 737226-
B21
Compatibility
HPE
ProLiant
Servers
HPE
ProLiant BL2x220c G7
HPE
ProLiant BL2x220c G5
HPE
ProLiant BL260c G5
HPE
ProLiant BL280c G6
HPE
ProLiant Bl420c Gen8
HPE ProLiant BL460c Gen9
HPE
ProLiant BL460c Gen8
HPE
ProLiant BL460c G7
HPE
ProLiant BL460c G6
HPE ProLiant BL460c G5
QuickSpecs
HPE 6125G/XG Ethernet Blade Switch
Overview
Page 2
HPE
ProLiant BL460c
HPE
ProLiant BL465c Gen8
HPE
ProLiant BL465c G7
HPE
ProLiant BL465 G6
HPE
ProLiant BL465 G5
HPE ProLiant BL465c
HPE
ProLiant BL480c
HPE
ProLiant BL490c G7
HPE
ProLiant BL490c G6
HPE
ProLiant BL495c G6
HPE
ProLiant BL495c G5
HPE
ProLiant BL660c Gen8
HPE
ProLiant BL660c Gen9
HPE ProLiant BL620c G7
HPE
ProLiant BL680c G5
HPE
ProLiant BL680c G7
HPE
ProLiant BL685c G7
HPE ProLiant BL685 G6
HPE
ProLiant BL685 G5
HPE
ProLiant BL685c
HPE
ProLiant WS460c Gen8
HPE
ProLiant WS460c Gen9
NOTE:
Some servers listed above may be discontinued.
HPE
Integrity
Servers
HPE
Integrity BL860c Server Blade
HPE
Integrity BL860c i2 Server Blade
HPE Integrity BL860c i4 Server Blade
HPE
Integrity BL870c Server Blade
HPE
Integrity BL870c i2 Server Blade
HPE
Integrity BL870c i4 Server Blade
HPE Integrity BL890c i2 Server Blade
HPE
Integrity BL890c i4 Server Blade
NOTE: Some servers listed above may be discontinued.
ProLiant BL cClass
Server Blade
Enclosures
HPE
BladeSystem c3000 Enclosure
HPE
BladeSystem c7000 Enclosure
QuickSpecs
HPE 6125G/XG Ethernet Blade Switch
Standard Features
Page 3
Standard Features
Performance
• Non blocking architecture
• Wire speed switching and IPv4/IPv6 routing on all ports
• Separate 10Gb Internal cross connect between switches
• Combine up to 10 switches into a single virtual switch
• RJ45 ports support 1Gb
• SFP+ ports support either 1Gb or10Gb depending on module inserted
• Any SFP+ port can be used for IRF connections
• Mix any combination of HPE 6125G and HP6125G/XG in a single IRF domain
• Store and Forward Switching
• Hardware-based wire-speed access control lists (ACLs)
Management
• Remote configuration and management through Web browser or CLI
• Secure Web-based management through HTTPS
• Standards based SNMP management via SNMPv1, v2c and v3
• OOBM via Onboard Administrator
• GUI Management via Intelligent Management Center
• RJ45 console port
• sFlow and RMON network monitoring
• Manager and operator privilege levels
• Command authorization via RADIUS
• Complete session logging for problem resolution
• LLDP Discovery protocol
• IPv6 management
• Dual flash images
• Multiple configuration files
• Syslog
• Network Time Protocol (NTP)
Management
• IEEE 802.1X user authentication
• MAC-based authentication with RADIUS server
• Access Control Lists (ACLs)
• Secure FTP
• STP Root Guard
• DHCP Protection from unauthorized DHCP servers
• IP Source Guard
• Dynamic ARP protection to prevent eavesdropping
• Guest VLAN
• Endpoint Admission Defense (EAD)
• RADIUS/TACACS+
• Secure management via SSHv2 and SNMPv3
• Unicast Reverse Path Forwarding (URPF)
Layer 2 Switching
• 32K MAC addresses
•
4094 VLANs
QuickSpecs
HPE 6125G/XG Ethernet Blade Switch
Standard Features
Page 4
• IEEE 802.1ad QinQ VLANs
• Jumbo packet support
• GVRP VLAN Registration Protocol
• Port Aggregation
• Spanning Tree Protocol, PVST, MSTP, RSTP, STP Root Guard
• Smart Link fast uplink failure recovery
• IP Multicast Snooping and data-driven IGMP
• Policy Based Routing
Layer 3 Routing
•
IPv4 routing protocols - static routes, RIP, OSPF and BGP
• IPv6 routing protocols - static routes, RIPng, OSPFv3 and BGP+
• IPv6 tunneling
• IP Multicast - PIM-SSM, PIM-DM, PIM-SM, IGMP for IPv4 and IPv6
• Equal-Cost Multipath (ECMP)
• Policy-based routing
• DHCP and DHCPv6 client
• VRRP
Quality of Service
(QoS)
•
Advanced classifier-based QoS - classifies traffic using multiple match criteria based on Layer 2, 3 and
4 information; applies QoS policies such as priority level and rate limit to selected traffic on a per-port
or per-VLAN basis
• Traffic policing - supports Committed Access Rate (CAR) and line rate
• Powerful QoS feature - creates traffic classes based on access control lists (ACL), IEEE 802.1p
precedence, IP, DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror or remark;
supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR),
weighted fair queuing (WFQ), and weighted random early discard (WRED)
• Storm restraint - allows limitation of broadcast, multicast, and unknown unicast traffic rate to cut down
on unwanted broadcast traffic on the network
Resiliency and
Hig
h Availability
• Intelligent Resilient Fabric (IRF) -
Creates virtual resilient switching fabrics, where two or more switches
perform as a single Layer 2 switch and Layer 3 router; Switches do not have to be co-located and can
be part of a disaster recovery system; Servers or switches can be attached using standard LACP for
automatic load balancing and high availability; Simplifies network operation by eliminating Spanning
Tree, ECMP and VRRP
• Device Link Detection Protocol (DLDP) - Monitors Link connectivity and shuts down ports at both
ends if unidirectional traffic is detected
• Rapid Ring Protection Protocol (RRPP) - Connects multiple switches in a high-performance ring using
standard Ethernet technology; traffic can be rerouted around the ring in less than 50 ms upon failure
• Smart Link - Allows 50 ms failover between links
• Virtual Router Redundancy Protocol (VRRP)
Monitoring and
Diagnostics
• OAM (802.3ah) - Detects data link layer problems in the "last mile"; monitors link status between two
devices
• CFD (802.1ag) - Connectivity Fault Detection (CFD) provides L2 link OAM mechanism used for link
connectivity detection and fault location
• Mirroring - Port mirroring enables traffic on a port to be simultaneously sent to a network analyzer for
monitoring; Flow-based mirroring
Security
• FIPS 140-2
Loading...