Page 1
hp OpenView storage data protector 6.0
Instant Recovery & Zero Downtime Backup Support Matrix
for HP StorageWorks Enterprise Virtual Array using SMI-S agent
Version: 3.6 Date: September 4, 2008
The main feature of HP StorageWorks Enterprise Virtual Array is the ability to create snapshots of data stored on the
disk arrays. These snapshots can be used to back up the data using a different server (backup system), and thus
reduce the backup load from the production server (application system), allowing the production applications to run
uninterrupted. The largest benefit of the snapshot integration is that the backup window is reduced, lowering the
load on the production server.
Following are the Operating System support details:
supported operating systems
Operating System Versions Application Host Backup Host
HP-UX (PA-RISC)
Windows
2003 (64-bit X64) 64-bit X64 64-bit X64
Solaris 7, 8, 9, 10 (SPARC) SPARC SPARC
Data Protector 6.0 supports the vsnap, snapclone and standard snapshots provided by EVA array. The EVA types
supported are EVA 3000, EVA 4000, EVA 5000, EVA 6000 and EVA 8000.
supported agent functionalities
11.11 (PA-RISC) PA-RISC PA-RISC
11.23 (PA-RISC) PA-RISC PA-RISC
11.31 (PA-RISC) PA-RISC PA-RISC
11.23 (Itanium) Itanium Itanium HP-UX (Itanium)
11.31 (Itanium) Itanium Itanium
2000 (32-bit) IA-32 IA-32
2003 (32-bit) IA-32 IA-32
2003 (64-bit Itanium) Itanium Itanium
Agent Functionality
Snapshot / vsnap Supported Not Supported
Snapclone Supported Supported
HP StorageWorks Enterprise Virtual Array runs Command View (CV) and Virtual Control Software (VCS or XCS) to
control the array. Following are the versions tested and certified by Data Protector; however SSL connections to the
Command View host are not yet supported:
Command View (CV): 3.x, 4.x, 5.x, 6.0.2, 7.0.x
Virtual Control Software (VCS/XCS): 3.0.2x, 4.0.x, 5.0.x, 6.0.x, 6.1.x
Zero Downtime Backup Instant Recovery
1
Page 2
supported SMIS provider versions
EVA Type
EVA3000 /
EVA5000
3.2.0.8/
3.3.2.5
4.0.1/4.1.0.
10/ 4.1.2.1
Supported Supported
4.1.6.2 and
Supported
SMIS provider version
4.1.8.2
Not
Supported Supported Supported
5.0.1.x 6.0.2.x 7.0.0.15 7.0.1.x
Not
Supported
EVA4000 /
EVA6000 /
- Supported Supported Supported Supported Supported Supported
EVA8000
EVA4100 /
EVA6100 /
- Supported Supported Supported Supported Supported Supported
EVA8100
For details on supported CV ports and their updating, please refer to the "Setting the Login Information for CV EVA"
section in the HP OpenView Storage Data Protector Zero Downtime Backup Administrator’s Guide.
Following is the list of Application Integrations supported on the various supported platforms:
supported configurations – PA-RISC
integrations on
hp-ux 11.11, 11.23
single-host BC dual-host BC CA
CA/BC
(combined)
Raw disk ZDB with IR ZDB with IR NA ZDB
Raw logical volume ZDB with IR ZDB with IR NA ZDB
File system offline ZDB with IR ZDB with IR NA ZDB
Oracle 8.1.7 RMAN offline or online ZDB with IR5 ZDB with IR NA ZDB
Oracle 9i RMAN offline or online
Oracle 10g RMAN offline or online
Oracle 11g RMAN offline or online
SAP R/3 4.6x + brbackup 4.6x offline or online
SAP R/3 4.7x + Brtools 6.40 offline or online
SAP Brtools 6.10 & 6.20 offline or online
SAP Brtools 6.40 offline or online
1
1, 4
1, 4
ZDB with IR5 ZDB with IR NA ZDB
2, 3
3
3
3
ZDB with IR5 ZDB with IR NA ZDB
ZDB with IR5 ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
SAP Brtools 7.0 offline or online 3 Not Supported ZDB with IR NA ZDB
1
Oracle 9i/10g includes all released versions of 9i/10g e. g. 9.0.x, 9.2.x and 10.x etc.
2
This includes all sub-versions. For example, 4.6x includes 4.6B, 4.6C, 4.6D etc.
3
The integration is done using the ‘Backint’ functionality.
4
Oracle 10gRAC based on Oracle ASM is not currently supported in combination with ZDB/IR
5
Only using Proxy-Copy Methodology
6
To utilize this feature, following patches are needed:
PHSS_36397/PHSS_36398/DPSOL_00276/DPLNX_00022
supported configurations - Itanium
integrations on
hp-ux 11.23
single-host BC dual-host BC CA
Raw disk ZDB with IR ZDB with IR NA ZDB
Raw logical volume ZDB with IR ZDB with IR NA ZDB
File system offline ZDB with IR ZDB with IR NA ZDB
Oracle 9i RMAN offline or online
Oracle 10g RMAN offline or online
Oracle 11g RMAN offline or online
1
1, 3
1,3
ZDB with IR4 ZDB with IR NA ZDB
ZDB with IR4 ZDB with IR NA ZDB
ZDB with IR4 ZDB with IR NA ZDB
CA/BC
(combined)
2
Page 3
SAP R/3 4.7x + Brtools 6.40 offline or online
2
Not Supported ZDB with IR NA ZDB
SAP Brtools 6.40 offline or online 2 Not Supported ZDB with IR NA ZDB
SAP Brtools 7.0 offline or online
2
Not Supported ZDB with IR NA ZDB
1
Oracle 9i/10g/11g includes all released versions of 9i/10g/11g e. g. 9.x.x, and 10.x.x, 11.x.x etc.
2
The integration is done using the ‘Backint’ functionality.
3
Oracle 10gRAC/11gRAC based on Oracle ASM is not currently supported in combination with ZDB/IR
4
Only using Proxy-Copy Methodology
5
To utilize this feature, following patches are needed:
FS/RD: PHSS_36397/PHSS_36398/DPSOL_00276/DPLNX_00022
Oracle: PHSS_37147/PHSS_37148/DPSOL_00306/DPLNX_00034
SAP: PHSS_37745/PHSS_337746/DPSOL_00327/DPLNX_00045
supported configurations
integrations on
hp-ux 11.313 (Itanium & PA-RISC))
single-host BC dual-host BC CA
CA/BC
(combined)
Raw disk ZDB with IR ZDB with IR NA ZDB
Raw logical volume ZDB with IR ZDB with IR NA ZDB
File system offline ZDB with IR ZDB with IR NA ZDB
Oracle 9i RMAN offline or online
Oracle 10g RMAN offline or online
Oracle 11g RMAN offline or online
SAP Brtools 7.0 offline or online
SAP Brtools 7.1 offline or online
5, 6
ZDB with IR4 ZDB with IR NA ZDB
1, 5, 6
1, 5
ZDB with IR4 ZDB with IR NA ZDB
2,4
2,4
(Itanium only) Not Supported ZDB with IR NA ZDB
ZDB with IR4 ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
1
Oracle 10gRAC/11gRAC based on Oracle ASM is not currently supported in combination with ZDB/IR
2
The integration is done using the ‘Backint’ functionality.
3
To utilize this feature, following patches are needed:
FS/RD: PHSS_36397/PHSS_36398/DPSOL_00276/DPLNX_00022
Oracle: PHSS_37147/PHSS_37148/DPSOL_00306/DPLNX_00034
SAP: PHSS_37745/PHSS_37746/DPSOL_00327/DPLNX_00045
4
For PA-RISC the integration is done using the ‘Backint’ functionality.
5
Oracle 9i/10g/11g includes all released versions of 9i/10g/11g e. g. 9.x.x, and 10.x.x, 11.x.x etc.
6
To utilize this feature, following patches are needed: PHSS_37148, DPLNX_0003, PHSS_37147,
DPSOL_00306
supported configurations – 32-bit Windows
integrations on Windows 2000 and Windows 2003 single-host BC dual-host BC CA
Raw disk ZDB with IR ZDB with IR NA ZDB
NTFS file system ZDB with IR ZDB with IR NA ZDB
Microsoft Exchange 2000 Not Supported ZDB with IR NA ZDB
Microsoft Exchange 2003 Not Supported ZDB with IR NA ZDB
Microsoft SQL 2000 Not Supported ZDB with IR NA ZDB
Microsoft SQL 2005 Not Supported ZDB with IR NA ZDB
Oracle 9i RMAN offline or online
Oracle 10g RMAN offline or online
Oracle 11g RMAN offline or online
1
1, 3
1, 3
ZDB with IR4 ZDB with IR NA ZDB
SAP R/3 4.7x + Brtools 6.40 offline or online
3
ZDB with IR4 ZDB with IR NA ZDB
ZDB with IR4 ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
CA/BC
(combined)
3
Page 4
SAP Brtools 6.20 offline or online
SAP Brtools 6.40 offline or online
SAP Brtools 7.0 offline or online 2
2
2
Not Supported ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
1
Oracle 9i /10g /11g covers all released versions of Oracle 9i/10g/11g e. g. 9.x.x and 10.x.x.,11.x.x etc
2
The integration is done using the ‘Backint’ functionality.
3
Oracle 10gRAC/11gRAC based on Oracle ASM is not currently supported in combination with ZDB/IR
4
Only using Proxy-Copy Methodology
supported configurations
integrations on
Windows 2003 (Itanium)
single-host BC dual-host BC CA
CA/BC
(combined)
Raw disk ZDB with IR ZDB with IR NA ZDB
NTFS file system ZDB with IR ZDB with IR NA ZDB
Microsoft Exchange2000 Not Supported ZDB with IR NA ZDB
Microsoft SQL2000 Not Supported ZDB with IR NA ZDB
Microsoft SQL2005 Not Supported ZDB with IR NA ZDB
Oracle 9i RMAN offline or online
Oracle 10g RMAN offline or online
SAP R/3 4.7 & Brtools 6.40 offline or online
SAP Brtools 6.20 offline or online
SAP Brtools 6.40 offline or online
1
1, 3
2
2
2
ZDB with IR4 ZDB with IR NA ZDB
ZDB with IR4 ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
SAP Brtools 7.0 offline or online 2 Not Supported ZDB with IR NA ZDB
1
Oracle 9i/10g includes all released versions of 9i/10g e. g. 9.0.x, 9.2.x and 10.x etc.
2
The integration is done using the ‘Backint’ functionality.
3
Oracle 10gRAC based on Oracle ASM is not currently supported in combination with ZDB/IR
4
Only using Proxy-Copy Methodology
5
To utilize this feature following Patch is needed: DPWIN_00329
supported configurations
integrations on
Windows 2003 (x64)
single-host BC dual-host BC CA
CA/BC
(combined)
Raw disk ZDB with IR ZDB with IR NA ZDB
NTFS file system ZDB with IR ZDB with IR NA ZDB
Microsoft SQL20054 Not Supported ZDB with IR NA ZDB
Oracle 10g RMAN offline or online
Oracle 10g RMAN offline or online
SAP Brtools 7.0 offline or online
2
1, 3
1, 3
ZDB with IR
ZDB with IR
Not Supported ZDB with IR NA ZDB
4 5
ZDB with IR NA ZDB
4 5
ZDB with IR NA ZDB
SAP Brtools 7.1 offline or online 2 Not Supported ZDB with IR NA ZDB
1
Oracle 9i/10g and 11g includes all released versions of 9i/10g/11g e. g. 9.0.x, 9.2.x and 10.x, 11.x etc.
2
The integration is done using the ‘Backint’ functionality.
3
Oracle 10gRAC and Oracle 11gRAC based on Oracle ASM is not currently supported in combination with
ZDB/IR
4
Page 5
4
To utilize this feature following is required: DPWIN_00319 (SQL2005 agent GR patch)
For ZDB/IR, following MS redistributables for .NET 3.0 framework are needed:
1.Microsoft.VC80.CRT.manifest, 2.msvcm80.dll, 3.msvcp80.dll, 4.msvcr80.dll
These above 4 files should be located in <Omniback Home>\Bin folder on the Windows 2003 x64
client where DP 6.0 SQL binaries are installed.
5
Only using Proxy-Copy Methodology
supported configurations – Solaris (SPARC)
integrations on
Solaris 8, 9 and 10
single-host BC dual-host BC CA
CA/BC
(combined)
Raw Disk ZDB with IR ZDB with IR NA ZDB
Raw Logical Volume ZDB with IR ZDB with IR NA ZDB
File System Offline ZDB with IR ZDB with IR NA ZDB
Oracle 8.1.7
RMAN offline or online
Oracle 9i RMAN offline or online
Oracle 10g RMAN offline or online
Oracle 11g RMAN offline or online
1
1, 4
1, 4
ZDB with IR5 ZDB with IR NA ZDB
SAP R/3 4.6x & brbackup 4.6x offline or online
SAP R/3 4.7 & Brtools 6.40 offline or online
SAP Brtools 6.10 & 6.20 offline or online
SAP Brtools 6.40 offline or online
3
3
3
2, 3
ZDB with IR ZDB with IR NA ZDB
ZDB with IR5 ZDB with IR NA ZDB
ZDB with IR5 ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
Not Supported ZDB with IR NA ZDB
SAP Brtools 7.0 offline or online 3 Not Supported ZDB with IR NA ZDB
SAP Brtools 7.1 offline or online 3 Not Supported ZDB with IR NA ZDB
1
Oracle 9i/10g/11g covers all released versions of Oracle 9i / 10g /11g e. g. 9.x.x and 10.x.x.,11.x.x etc
2
This includes all sub-versions. For example, 4.6x includes 4.6B, 4.6C, 4.6D etc.
3
The integration is done using the ‘Backint’ functionality.
4
Oracle 10gRAC/11gRAC based on Oracle ASM is not currently supported in combination with ZDB/IR
5
Only using Proxy-Copy Methodology
supported volume managers
Operating System
LVM VxVM Disk Manager
Volume Manager
HP-UX Supported Not Supported Not Applicable
Sun Solaris Not Applicable Not Supported Not Applicable
Windows
Not Applicable Not Supported
Supported
1
1
Dynamic Disks are not supported
supported secure path versions
Operating System Secure Path / MPIO
HP-UX
Sun Solaris
Windows
5
3.0F/latest available
3.0D(SP1)/latest available
4.0C(SP2)/latest available
Page 6
Supported Backup Topologies
The HP StorageWorks Enterprise Virtual Array integration can be used in different backup topology scenarios,
without any user interference or special configuration:
• One application system, one disk array, one backup system
• One application system, multiple disk arrays, one backup system
• Multiple application systems, one or multiple disk arrays, one backup system
• Single system (filesystem, disk image and Oracle backup only)
The supported high-availability configurations are:
1. Clustered Application hosts, stand-alone backup host.
2. Clustered Application hosts and clustered backup hosts
3. Stand-alone Application hosts and clustered backup hosts
Note: For details on supported versions of the Clustering Software, please refer to the “Platform & Integration
Support Matrices” for Data Protector 6.0.
6
Loading...