QuickSpecs
HP StorageWorks DAT 72 Tape Drive
HP StorageWorks DAT 72 tape drive for ProLiant and AlphaServer systems
Internal (DAT 72i), Worldwide (Carbon) |
Q1525A |
|
|
External (DAT 72e), NA (Carbon) |
Q1527A |
|
|
External (DAT 72e), Intl (Carbon) |
Q1528A |
|
|
3U Rackmount Kit, Worldwide (No drives included. Accommodates up to 4 internal |
274338-B21 |
DDS drives) |
|
|
|
HP StorageWorks DAT 72 tape drive for Open Connect
Internal (DAT 72i), Worldwide (Carbon) |
Q1522A |
|
|
|
|
External (DAT 72e), Worldwide (Carbon) |
Q1523A |
|
|
|
|
Array Module (DAT 72m) |
– Field Integrated (Flint) |
Q1524A |
|
|
|
Array Module (DAT 72m) |
– Factory Integrated (Flint) |
Q1524A-OD1 |
|
|
|
NOTE: Array modules fit in to HP Tape Array 5300 (C7508A or C7508AZ for factory |
|
|
fitted). |
|
|
|
|
|
HP StorageWorks DAT 72 tape drive, Trade Ready (No markings on front panel), |
Q1526A |
|
Worldwide (Flint. No markings on front panel, no learning products, software, cables) |
|
Product specifications apply to all branded HP ProLiant, AlphaServers and Open Connect variants with the exception of front panel colors, which vary.
The Trade Ready drive has no markings on the front panel, no learning products, no software, and a two year warranty and is sold into the hardware integrator market.
HBAs for open connect variants see table on pages 8 - 9 or go to http://www.hp.com/go/connect
Feature List |
• |
36 GB native capacity on a single tape, 72 GB at 2:1 compression |
|
• |
3 MB/s data transfer rate (native), 6 MB/s at 2:1 compression |
|
• |
Internal, external, rackmount and Trade Ready configurations |
|
|
|
Product Description |
The HP StorageWorks DAT 72 tape drive is the fifth generation of HP’s popular DDS tape format, delivering a |
|
|
capacity of 72 GB * on a single HP DDS data cartridge (C8010A). Reinforcing HP’s leadership position in the |
|
|
tape market, it builds on the success of four previous generations of DDS drive technology providing |
|
|
unprecedented levels of capacity, reliability and cost of ownership. The StorageWorks DAT 72 tape drive is the |
|
|
ideal choice for small and medium businesses, remote offices or workgroups. |
|
|
* Assuming 2:1 compression ratio. |
|
|
|
|
Customer benefits include |
• |
High capacity storage – typically 72 GB on a single cartridge (2:1 compression) |
|
• |
Fast performance – allows backup at a rate of 21.6 GB/hour (2:1 compression) |
|
• |
Investment protection – The drive is read and write compatible with both DDS-3 and DDS-4 media enabling |
|
• |
customers to restore older data if required and protect their existing investment in media. |
|
Very high reliability of both the tape drive and media |
|
|
• |
Very low cost media |
|
• |
OBDR - quick, reliable and simply restores the entire system just by inserting the most recent backup tape |
|
• |
and pushing one button on the tape drive |
|
Branded variants (internal, external and array modules) include a full single user copy of TapeWare software |
|
|
|
with disaster recovery option |
DA-11597 |
World Wide — Version 3 — June 17, 2003 |
1 |
QuickSpecs
HP StorageWorks DAT 72 Tape Drive
Key Features |
• |
36 GB (native), 72 GB (2:1 compression) capacity |
|
• |
3 MB/s (native), 6 MB/s (2:1 compression) transfer rate |
|
• |
Internal, external, array module and Trade Ready configurations |
|
• |
Universal implementation into HP ProLiant and AlphaServer systems |
|
• |
Broad ISV connectivity (HP OpenView Storage Data Protector, Yosemite TapeWare, VERITAS Backup |
|
• |
Exec, CA ARCserve, Tivoli TSM, Legato Networker) |
|
Qualified on Microsoft Windows NT 4.0, Windows 2000 and Windows Server 2003 (.NET), many |
|
|
• |
versions of LINUX, Novell NetWare, Tru64 UNIX, HP-UX and SUN Solaris |
|
Lowest media price of any tape technology |
|
|
• |
Supports HP’s One-Button Disaster Recovery (OBDR) Solution |
|
• |
Full single client copy of TapeWare with disaster recovery option included with internal, external and array |
|
|
module variants |
DAT 72 (Fifth generation DDS Tape Technology)
Fifth generation tape drive technology uses the helical scan format. Data is written and recorded in groups, where each group is a logical collection of data records physically recorded as 22 frames, each frame containing 2 tracks. The DAT 72 format is a semi-open format and data written on any HP StorageWorks DAT 72 tape drive may be interchanged directly with DAT 72 tape drives from other vendors.
Backwards Compatibility |
DAT 72 tape drives are fully read and write backwards compatible with all DDS-3 and DDS-4 products from all |
|
licensed manufacturers. |
|
|
High Reliability |
HP's DDS tape technology has proven itself during more than 12 years of use as one of the most reliable tape |
|
technologies on the market today. DAT 72 builds on the strengths and successes of previous generations of |
|
DDS drives. The HP StorageWorks DAT 72 tape drive has a mean time between failure (MTBF) rating of 400,000 |
|
hours at a 12% percent duty cycle, making it an ideal choice for small and medium businesses. |
|
|
Compression |
The HP StorageWorks DAT 72 tape drive as per previous generations of DDS uses the ‘DCLZ’ data compression |
|
algorithm. Data compression is host selectable with the default that compression is turned on. |
|
|
Compatibility Testing |
The HP StorageWorks DAT 72 tape drive for ProLiant is fully supported and compatible with HP ProLiant servers, |
|
AlphaServers and host bus adapters. This tape drive is thoroughly tested with other major brands of server, |
|
leading software and operating systems. The compatibility matrix shown below gives a more comprehensive |
|
listing of all hardware and software supported. |
|
|
Rackmount |
All HP DDS tape products have variants that enable the drive to be fitted into racks. |
|
For compatibility with ProLiant and AlphaServer systems use 3U rackmount kit (P/N 274338-B21) and internal |
|
drive (P/N Q1525A). |
|
For compatibility with HP UNIX systems and to be fitted into HP Tape Array 5300 (P/N C7508A) use Array Module |
|
(P/N Q1524. Order option #OD1 for Factory fitted option). |
|
|
HP DDS Storage Media |
HP’s test program for HP DAT 72 media is probably the most thorough and comprehensive in the industry. HP |
|
data cartridges must satisfy an exhaustive battery of additional tests that relate directly to real life situations, |
|
where real data and real businesses are at stake. Over 1 million test hours on media and drives per year ensure |
|
that HP data cartridges will always offer maximum reliability even in the most extreme conditions. HP |
|
recommends that customers always use HP branded media to ensure stress free backup and complete peace of |
|
mind. |
DA-11597 |
World Wide — Version 3 — June 17, 2003 |
2 |
QuickSpecs
HP StorageWorks DAT 72 Tape Drive
Product Highlights
Management |
HP StorageWorks DDS tape products are supported, by HP StorageWorks Library and Tape Tools (L&TT) |
|
|
version 3.1 onwards. This tool is intended to help in the installation and maintenance of HP tape drives and |
|
|
devices and also includes: |
|
|
• |
Diagnostic tools for tape drive and tape automation devices, designed to simplify troubleshooting |
|
• |
Multiple options for retrieving firmware information and updating it |
|
• |
Instructions and download of L&TT v3.1 are available at: |
|
|
http://www.hp.com/country/us/eng/software_drivers.htm (search for DAT 72) |
|
|
|
One Button Disaster Recovery |
This feature puts the tape drive into a special disaster recovery mode that enables it to act as a bootable CD to |
|
(OBDR) |
restore the operating system and reboot the server or workstation. |
Why buy HP StorageWorks DAT 72?
DDS has the highest installed base of any technology in the market with over 9 million drives installed.
•It has excellent reliability >400000 hours MTBF at 12% duty cycle.
•High capacity (72 GB)
•A semi-open industry standard – DAT 72 format – with read/write compatibility with media written by competitor’s drives
•Investment protection – read and write compatibility with DDS-3 and DDS-4
•Lowest cost media of any tape technology
•Supports HP’s One-Button Disaster Recovery (OBDR) solution - A simple, fast, hassle-free way to return your network to exactly the way it was at the time of your last backup
•Full single user copy of TapeWare included in the box
Warranty |
3-year, next-business-day unit exchange (not available in some countries). |
|
|
Service & Warranty Support |
Additional warranty protection and/or Installation packages can be purchased. |
|
|
Software Product Services |
Media and documentation updates |
Hardware Product Services |
The information below covers all DAT 72 products. |
|
'A' signifies shrink-wrap, 'E' signifies electronic |
|
Service |
|
Blue Service Pack options |
|
Onsite, next day, 3-year |
|
Onsite,4 hour, 13x5, 3-year |
|
Onsite,4 hour, 24x7, 3-year |
|
Red Service pack options |
|
Onsite, next day, 3-year |
|
Onsite, 4 hour, 9x5, 3-year |
|
Onsite, 4 hour, 24x7, 3-year |
|
Onsite, installation |
Product Number
H3155A/E
H4616A/E
U2068A/E
174403-002
174406-002
174409-002
174412-002
DA-11597 |
World Wide — Version 3 — June 17, 2003 |
3 |
QuickSpecs
HP StorageWorks DAT 72 Tape Drive
|
DAT 72 |
DDS-4 |
Announce Date |
April 2003 |
1999 |
|
|
|
Capacity (native) |
36 GB |
20 GB |
|
|
|
SCSI Interface |
Wide Ultra SCSI LVD |
Wide Ultra SCSI LVD |
|
|
|
Buffer |
8 MB with full error protection (SDRAM) |
4 MB (SDRAM) |
|
|
|
Firmware Upgradeable |
Yes with LTT |
Yes with LTT |
|
|
|
Maximum Drives per bus |
15 |
15 |
|
|
|
MTBF |
400,000 hours @ 12% duty cycle |
400,000 hours @ 12% duty cycle |
|
|
|
Transfer Rate (native) |
3 MB/s |
3 MB/s |
|
|
|
DA-11597 |
World Wide — Version 3 — June 17, 2003 |
4 |
QuickSpecs
HP StorageWorks DAT 72 Tape Drive
SERVER AND TAPE COMPATIBILITY FOR PROLIANT
(For open connect, go to: http://www.hp.com/go/connect)
|
|
E = external, R=rack- |
|
|
|
mount, I=Internal, H=Hot |
|
|
|
Plug, |
|
|
|
X = All variants (external, |
|
|
|
internal, rack-mount and |
Part Number |
|
|
hot plug) |
|
HP ProLiant Servers |
DL 320 (G2) |
R, E |
|
|
|
|
|
|
DL 360 (G1/G2) |
R, E |
|
|
|
|
|
|
DL 380 (G1/G2/G3) |
R, E, H |
|
|
|
|
|
|
DL 580 |
R, E, H |
|
|
|
|
|
|
DL 760 |
R, E, H |
|
|
|
|
|
|
ML 310 (G2, G3) |
X |
|
|
|
|
|
|
ML 330 (G2, G3) |
X |
|
|
|
|
|
|
ML 350 (G1/G2/G3) |
X |
|
|
|
|
|
|
ML 370 (G1/G2/G3) |
X |
|
|
|
|
|
|
ML 530 (G1/G2) |
X |
|
|
|
|
|
|
ML 570 (G1/G2) |
X |
|
|
|
|
|
|
ML 750 |
R, E, I |
|
|
|
|
|
|
8 way, 4U ProLiant DL 740 |
R, E, H |
|
|
|
|
|
|
DL380 Generation 2 Packaged Cluster |
R, E, H |
|
|
|
|
|
|
|
|
|
HP ProLiant SCSI HBA's |
Dual Channel Ultra3 |
X |
129803-B21, -291 |
|
2-Ch Ultra-320 SCSI HBA All |
X |
268351-B21 |
|
|
|
|
|
Single Channel 64-bit Wide Ultra3 |
X |
154457-B21, -291 |
|
|
|
|
|
|
|
|
3rd Party IA-32 SCSI HBA's |
Adaptec 29320D |
X |
|
|
Adaptec 29160* |
X |
C7474A |
|
|
|
|
|
Adaptec 2940 |
X |
|
|
|
|
|
|
LSI 22320 |
X |
|
|
|
|
|
|
LSI 22915 |
X |
|
|
|
|
|
|
LSI 22895 |
X |
|
|
|
|
|
|
* NOTE: Any 3rd party server will be supported when the Adaptec 29160 HBA is used. |
|
|
|
|
|
|
DA-11597 |
World Wide — Version 3 — June 17, 2003 |
5 |