HP SANworks Network View is a SAN management application providing a consolidation point for storage network visualization, monitoring and
configuration. SAN devices, their Fibre Channel interconnects, and associated status are automatically discovered and displayed in an intuitive
topographical network map. SAN device management is made easy by double clicking on a device icon. System performance bottlenecks are identified
for proactive resolution and planning. A JAVA applet based design allows remote SAN management from any web browser. Network View is easily
installed on the Management Appliance and because it is an appliance application; host operating system integration is not a necessity.
USTOMER BENEFITS
C
• Consolidation and integration point for managing all storage networked devices
•
Reduced IT resource needs through consolidation
• Remote access from any network or internet connected PC
•
At-a-glance visualization of storage fabric and associated status
• Proactive SAN availability monitoring
•
Proactive SAN and storage array performance monitoring for system bottleneck resolution
• Management and monitoring of numerous HP and third party devices
•
Operating system agnostic without the need for a server-client-agent setup
• Easy installation and setup
•
Integration into network management tools through the Management Appliance
•Scalable for future storage network growth
OFTWARE FEATURES/FUNCTIONALITY
S
• Automated in-band and out-of-band device discovery
•
Graphical SAN topology mapping of all Fibre Channel connected devices and their interconnects
• Graphical status display
•
Automated SAN availability monitoring and notification via e-mail and text pager when faults arise
• SNMP trap forwarding
•
Custom notification set up
•Performance monitoring and graphical trending of numerous switch and HP StorageWorks RAID arrays, Modular arrays, Enterprise Virtual arrays,
performance metrics
•
Launch capability for all browser enabled device management tools
•Support for numerous HP and third party devices
ARDWARE SUPPORT
H
Network View supports the following hardware devices running the software, firmware, or driver versions listed in the software pre-requisite section.
Support is defined as capability for device discovery and monitoring.
•HP StorageWorks Network Sto rage Router Model M2402
DA-10852 North America — Version 9 — August 1, 2002
1
Page 2
QuickSpecs
hp SANworks Network View v2.0B
HARDWARE SUPPORT
•
Fibre Channel switches:
Fibre Channel Switches Part Numbers
HP StorageWorks Fibre Channel SAN Switch/8 158222-B21
HP StorageWorks Fibre Channel SAN Switch/16 158223-B21
HP StorageWorks Fibre Channel SAN Switch 2/16 240602-B21
HP StorageWorks Fibre Channel SAN Switch 8-EL 176219-B21
HP StorageWorks Fibre Channel SAN Switch 16-EL 212776-B21
HP StorageWorks Fibre Channel SAN Switch 2/8-EL 258707-B21
HP StorageWorks Fibre Channel SAN Switch 2/16-EL 283056-B21
HP StorageWorks SAN Switch Integrated/32 230616-B21
HP StorageWorks SAN Switch Integrated/64 230617-B21
HP StorageWorks Core Switch 2/64 254508-B21
HP StorageWorks Fibre Channel Arbitrated Loop Switch 8 (FC-AL) 177862-B21
Brocade SilkWorm Models 2400, 2800, 2050, 2250, 3800, 6400, 0r 12000 Contact Brocade for part number information
HP StorageWorks director 2/64 286809-b21
HP StorageWorks edge switch 2/16 286811-B21
HP StorageWorks edge switch 2/32 286810-B21
McData ED-5000 or 6064 Director Contact McData for part number information
McData 3216 Fabric Switch Contact McData for part number information
McData 3232 Fabric Switch Contact McData for part number information
HP StorageWorks Modular Storage Array Fabric Switch 6
HP StorageWorks Enterprise Storage Array 12000 Fibre Channel
−
HP StorageWorks Enterprise Modular Array 16000 Fibre Channel
−
HP StorageWorks Enterprise Virtual Array
− HP StorageWorks Modular SAN Array 1000
−
EMC Symmetrix systems using the Sym API 4.2 or 4.3
•
Server/host systems and associated Host Bus Adapters (HBAs): for discovery and monitoring purpose
Server/Host Systems Associated HBAs Part Numbers
Windows NT (Intel) & Windows 2000 (Intel) HP StorageWorks 2 Gb, 64-bit/66 MHz PCI-to-Fibre Channel Host Bus
Windows NT (Intel) & Windows 2000 (Intel) HP StorageWorks 64-bit/33 MHz PCI-to-Fibre Channel Host Bus Adapter 176479-B21
Windows NT (Intel) & Windows 2000 (Intel) HP StorageWorks 32-bit/33 MHz PCI-to-Fibre Channel Host Bus Adapter 380574-001
Windows NT (ProLiant) and Windows 2000
(ProLiant)
Windows 2000 for Datacenter HP StorageWorks 64-bit/33 MHz PCI-to-Fibre Channel Host Bus Adapter 176479-B21
Tru64 UNIX (Alpha) HP StorageWorks 2 Gb, 64-bit/66 MHz PCI-to-Fibre Channel Host Adapter for
Tru64 UNIX (Alpha) HP StorageWorks 64-bit/33 MHz PCI-to-Fibre Channel Host Bus Adapter 168794-B21
Tru64 UNIX (Alpha) HP StorageWorks 32-bit/33 MHz PCI-to-Fibre Channel Host Bus Adapter 380574-001
Solaris HP StorageWorks 32-bit PCI-to-Fibre Channel Host Bus Adapter for Solaris 380576-001
Solaris HP StorageWorks 64-bit SBus-to-Fibre Channel Host Bus Adapter for Solaris 123503-001
OpenVMS (Alpha) HP StorageWorks 2 Gb, 64-bit/66 MHz PCI-to-Fibre Channel Host Adapter for
OpenVMS (Alpha) HP StorageWorks 64-bit/33 MHz PCI-to-Fibre Channel Host Bus Adapter 380574-001
OpenVMS (Alpha) HP StorageWorks 32-bit/33 MHz PCI-to-Fibre Channel Host Bus Adapter 168794-B21
HP-UX HP StorageWorks 64-bit/66 MHz PCI-to-Fibre Channel Host Bus Adapter 218409-B21
AIX HP StorageWorks 64-bit/66 MHz PCI-to-Fibre Channel Host Bus Adapter 197819-B21
NetWare (Intel) HP StorageWorks 64-bit/66 MHz PCI-to-Fibre Channel Host Bus Adapter 120186-B21
(continued)
218232-B21
245299-B21
Adapter for Windows/NT, Windows 2000 (msa1000 only)
HP StorageWorks 64-bit/66 MHz PCI-to-Fibre Channel Host Bus Adapter 120186-B21
261329-B21
Tru64 UNIX and HP OpenVMS (HSG80 only)
261329-B21
Tru64 UNIX and OpenVMS (HSG80 only)
DA-10852 North America — Version 9 — August 1, 2002
2
Page 3
QuickSpecs
hp SANworks Network View v2.0B
SOFTWARE PREREQUISITES
•
Management Appliance running Open SAN Manager (OSM) version 1.0C
•
Fibre Channel Switches and Routers:
−
If using HP StorageWorks 1 Gb Fibre Channel SAN Switches, firmware version 2.1.9m or 2.6
−
If using HP StorageWorks 2 Gb Fibre Channel SAN Switches, firmware version 3.02f
−
If using HP StorageWorks Core Switch 2/64, firmware 4.0c
−
If using Brocade SilkWorm Models 2400, 2800, 2050, 2250, or 6400, firmware versions 2.1.9m, 2.2.1, 2.4.1f, or 2.6c
−
If using Brocade SilkWorm Model 3800, firmware version 3.02f
−
If using Brocade 12000, firmware version 4.0c
−
If using HP StorageWorks Fibre Channel Arbitrated Loop Switch 8 (FC-AL), firmware version 1.00-G03
−
If using HP StorageWorks director 2/64, firmware version 2.0
−
If using HP Storage edge switches, firmware version 2.0
−
If using McData ED-5000 Director, firmware version 1.2.02 pass 6
−
If using McData 6064 Director, firmware version 2.0 EFCM v6.0
−
If using McData 3216 or 3232 Fabric Switch, firmware version 2.0
−
If using HP StorageWorks Fibre Channel Storage Hubs, firmware version 4.00-g06
−
If using HP StorageWorks Modular Data Routers, firmware version 1187
−
If using HP StorageWorks Network Storage Router Model M2402, firmw a re version 4.02aw
−
If using HP StorageWorks Modular Storage Array Fabric Switch 6, firmware version 101G06
•
RAID Storage Systems:
−
If using HP StorageWorks Enterprise Virtual Array
VCS version 2.0
OSM version 1.0C SP2
−
If using HP StorageWorks RAID Storage Systems
ACS version 8.6-1 or 8.7
OSM version 1.0C SP4
−
If using HP StorageWorks RAID Array 4100
Sub-system firmware J51
Controller firmware 2.6
−
If using HP StorageWorks Modular SAN Array 1000
Sub-system firmware 1.78
Controller firmware 1.14
−
If using EMC Symmetrix, those that support Sym API 4.2 & 4.3
•
Browser Support: Client PC systems browsing to the Management Appliance require the following OS/browser versions:
Client Systems Browser Browser Version
Windows 2000 Internet Explorer v5.01 & v5.5
Windows 2000 Netscape v4.79
Windows NT v4.0 Internet Explorer v5.5
Windows NT v4.0 Netscape v4.79
Solaris Netscape v4.78
Tru64 UNIX Netscape v4.78
DA-10852 North America — Version 9 — August 1, 2002
3
Page 4
QuickSpecs
hp SANworks Network View v2.0B
SOFTWARE PREREQUISITES
Host Agent Support: Network View requires host agent installation for Fibre Channel HBA (host bus adapter) discovery and monitoring purpose only. The
following table lists supported host operating systems and HBA firmware versions. Installable agents are provided with the Network View CD.
Server/Host
Systems
Windows 2000 SP2 HP StorageWorks 2 Gb, 64-bit/66 MHz
Windows 2000 SP2 HP StorageWorks 64-bit/33 MHz PCI-to-
Windows 2000 SP2 HP StorageWorks 32-bit/33 MHz PCI-toWindows 2000
(ProLiant only)
Windows NT v4.0 SP6a HP StorageWorks 2 Gb, 64-bit/66 MHz
Windows NT v4.0 SP6a HP StorageWorks 64-bit/33 MHz PCI-to-
Windows NT v4.0 SP6a HP StorageWorks 32-bit/33 MHz PCI-toWindows NT
(ProLiant only)
Windows 2000
for Datacenter
Tru64 UNIX v5.1, v5.1A HP StorageWorks 2 Gb, 64-bit/66 MHz
Tru64 UNIX v4.0F, v4.0G, v5.0a,
Tru64 UNIX v4.0F, v4.0G, v5.0a,
Solaris v2.6, v7 or v8
Solaris v2.6, v7 or v8
OpenVMS v7.3, 7.3-1 HP StorageWorks 2 Gb, 64-bit/66 MHz
OpenVMS v7.3, 7.3-1 HP StorageWorks 64-bit/33 MHz PCI-toOpenVMS v7.3, 7.3-1 HP StorageWorks 33-bit/33 MHz PCI-to-
HP-UX v11.0 HP StorageWorks 64-bit/66 MHz PCI-to-
AIX v4.3.2, v4.3.3 HP StorageWorks 64-bit/66 MHz PCI-to-
NetWare v4.2, v5.1, v6.0 HP Storag eWorks 64-bit/66 MHz PCI-to-
Note 1:
The following patches need to be installed for the Solaris operating system:
The order of patch installation is dictated by the patch dependencies as documented by Sun Microsystems for each patch. Patches can be
obtained from http://access1.sun.com
functionality of 109104 into the latest kernel patch (106541-16). If a patch is not found or not up to the latest revision, a warning message is
displayed. In the case of the 109104 patch, the warning message can be safely ignored if 106541-16 or greater is installed.
OS Versions Associated HBAs HBA Part
SP2 HP StorageWorks 64-bit/66 MHz PCI-to-
v4.0 SP6a HP StorageWorks 64-bit/66 MHz PCI-to-
v2.0 HP StorageWorks 64-bit/33 MHz PCI-to-
v5.1, v5.1a
v5.1, v5.1a
(See Note 1)
(See Note 1)
107733-09, 108091-03.
(continued)
PCI-to-Fibre Channel Host Adapter for
Windows/NT, Windows 2000 (msa1000
Fibre Channel Host Bus Adapter
Fibre Channel Host Bus Adapter
Fibre Channel Host Bus Adapter
PCI-to-Fibre Channel Host Adapter for
Windows/NT, Windows 2000 (msa1000
Fibre Channel Host Bus Adapter
Fibre Channel Host Bus Adapter
Fibre Channel Host Bus Adapter
Fibre Channel Host Bus Adapter
PCI-to-Fibre Channel Host Adapter for
Tru64 UNIX and OpenVMS (HSG80 only)
HP StorageWorks 64-bit/33 MHz PCI-to-
Fibre Channel Host Bus Adapter for Tru64
HP StorageWorks 32-bit/33 MHz PCI-to-
Fibre Channel Host Bus Adapter
HP StorageWorks 32-bit PCI-to-Fibre
Channel Host Bus Adapter for Solaris
HP StorageWorks 64-bit SBus-to-Fibre
Channel Host Bus Adapter for Solaris
PCI-to-Fibre Channel Host Adapter for
Tru64 UNIX and OpenVMS (HSG80 only)
Fibre Channel Host Bus Adapter
Fibre Channel Host Bus Adapter
Fibre Channel Host Bus Adapter for HP-UX
Fibre Channel Host Bus Adapter for AIX
Fibre Channel Host Bus Adapter
. However, patch 109104 −* is no longer available from access1. This is because Sun has rolled the
380574-001 3.20x7 1.29
380576-001 3.03 2.5.9
123503-001 13.3.7 2.5.9
261329-B21 3.81A4 Embedded in OS
168794-B21 3.81a4 Embedded in OS
380574-001 3.20x7 Embedded in OS
216409-B21 1.4 2.5.8
197819-B21 2.01.19 1.5.14.14, 1.5.15.1
120186-B21 No Firmware
HBA Firmware
Versions
BIOS 1.60a5
No Firmware 5.4.6.63
3.81a4
HBA Driver
Versions
5-4.81a9
1.29
CPQFC.HA
M 2.52
DA-10852 North America — Version 9 — August 1, 2002
4
Page 5
QuickSpecs
hp SANworks Network View v2.0B
HARDWARE PREREQUISITES
•
Management Appliance
DISTRIBU TION MEDIA
This product is distributed on an individual product CD-ROM.
DOCUMENTATION
The Network View documentation consists of the following:
•
Installation Guide
•
Releases Notes
•
Quickspecs
•
User’s Guide
•
Online Help
SOFTWARE LICENSING
The Network View is licensed by the number of available Fibre Channel switch ports in the SAN being managed by the Network View product. The
licenses are sold in increments of 64, 128, 256, and 512 Fibre Channel switch ports. Licenses are additive allowing license combinations that more
closely match the number of available Fibre Channel switch ports in the SAN. Switch port amount can be applied to numerous fabrics.
Upgrade licenses are for version 1.0 to version 2.0A upgrades only and cannot be used for switch port upgrades.
Switch port licenses are additive.
This software is furnished only under a license. For more information about HP licensing terms and policies, contact your local HP office.
SOFTWARE PRODUCT SERVICES
•
Software Support (Stand-alone software advisory and remedial software telephone support)
•
Software product subscription (New version license rights, and Media and documentation distribution service)
•
Installation services
These software product services are sold under HP CarePaq Services program and via customized service contracts.
•
CarePaq for software provides telephone support and License Right to new license version to provide all updates.
•
CarePaq for software is available for sale at any time and, as opposed to hardware CarePaq’s, the commencement date will be the purchase date.
Proof of purchase may be required.
•
CarePaq services are prepaid services for easy budgeting.
For additional information on Software Product Services and CarePaq, as well as orderable part numbers, please refer to the URL listed below:
Software Product Services
For additional CarePaq (hardware & software and installation support) information for European and other countries, as well as orderable part numbers,
please refer to the URL listed below and select the country of your choice CarePaqs
If you have specific questions about availability or how to obtain services contact your local HP representative. Contact information for your local area
can be found at Support
Maintenance releases, bug fixes and software patches will be available at no charge to customers on the HP support website at SANworks Support
.
.
.
SOFTWARE WARRANTY
HP warrants that the Software will perform substantially as described in the documentation accompanying the Software for a period of ninety (90) days
from delivery.
An upgrade to the 90 days software conformance to warranty of Network View to (1 or 3) full year of 9 hours by 5 days (or 24x7) software advisory and
remedial software telephone support, new version license rights, and media and documentation distribution service is available as CarePaq service.
.
DA-10852 North America — Version 9 — August 1, 2002
5
Page 6
QuickSpecs
hp SANworks Network View v2.0B
ORDER INFORMATION
Part Numbers Description
235904-B24 Network View v2.0B, 64 Switch Port License, Media, and Documentation
235905-B24 Network View v2.0B, 128 Switch Port License, Media, and Documentation
236073-B24 Network View v2.0B, 256 Switch Port License, Media, and Documentation
236074-B24 Network View v2.0B, 512 Switch Port License, Media, and Documentation
261761-B23 Network View Upgrade License v2.0B, 64 Switch Port, Media, and Documentation
261762-B23 Network View Upgrade License v2.0B, 128 Switch Port, Media, and Documentation
261763-B23 Network View Upgrade License v2.0B, 256 Switch Port, Media, and Documentation
261764-B23 Network View Upgrade License v2.0B, 512 Switch Port, Media, and Documentation
265665-B22 SAN Management Bundle
283051-B21 Non-Disruptive HSG80
283052-B21 E nterprise Disaster Tolerant
PHYSICAL DATA
The shipping dimensions are the same for all part numbers.
Shipping Dimensions
Height 9.25 in/23.5 cm
Width 8.25 in/20.96 cm
Depth 1.25 in/3.18 cm
Weight 3 lb/1.36 kg
Compaq shall not be liable for technical or editorial errors or omissions contained herein. The information is provided “as is” without warranty of any kind and
is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such
products. Nothing herein should be construed as constituting an additional warranty.
DA-10852 North America — Version 9 — August 1, 2002
6
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.