HP D9N46A, D9N44A, D9N45A, D9N52A, D9N47A Specifications

HP Remote Monitoring Power Distribution Units (PDU) provide rack level power monitoring over the network. With billing grade accuracy
these PDUs are excellent choices for data centers wanting to make the most of circuit capacity or for co-location facilities needing to
precisely track power usage for billing purposes.

The low profile single piece design on these PDU's provides multiple mounting options and ease of access to rear devices for
maintenance. They are designed for HP racks but will also work in a large variety of third party racks as well using standard button and
keyhole mounting. They can be installed on either side of the rack with outlets facing the back of the rack for easy access and improved
clearance. Also for higher power density they can be installed side by side on both sides of the rack with the outlets facing in towards
the center of the rack. HP Remote Monitored PDUs are available in 1U and vertical form factors in single and 3-phase models and are
back by HP's limited 3-year warranty.

Monitored PDU, 1UModels (D9N46A shown)

Monitored PDU, Half Height Models (D9N45A shown)

Monitored PDU, Mid Height Models (D9N47A/D9N48A shown)

Monitored PDU, Full Height Models (D9N58A/D9N59A shown)

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Overview

DA - 14669 North America — Version 7 — May 9, 2014

Page 1

HP Remote Monitoring
Power Distribution Units

1U Models

HP 3.6kVA 200-240 Volt Detachable C20 Input (12xC13) WW Monitored PDU

D9N46A

HP 4.9kVA 208 Volt L6-30 Input (12xC13) NA/JP Monitored PDU

D9N44A

Half Height Models

HP 3.6kVA 200-240 Volt Detachable C20 Input (16xC13) WW Monitored PDU

D9N45A

Mid Height Models

HP 4.9kVA 208 Volt L6-30 Input (20xC13/4xC19) NA/JP Monitored PDU

D9N47A

HP 5.7kVA 208 Volt L21-20 3-Phase Input (18xC13/3xNEMA 5-20R) NA/JP Monitored
PDU

D9N52A

HP 8.6kVA 208 Volt L21-30 3-Phase Input (20xC13/3xC19/3xNEMA 5-20R) NA/JP
Monitored PDU

D9N53A

HP 8.6kVA 208 Volt L15-30 3-Phase Input (18xC13/3xC19) NA/JP Monitored PDU

D9N51A

Full Height Models

HP 8.3kVA 208 Volt CS8265C Input (30xC13/3xC19) NA Monitored PDU

D9N49A

HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (30xC13/3xC19) NA Monitored PDU

D9N61A

HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (24xC13/3xC19) NA/JP Monitored PDU

D9N54A

HP 14.4kVA 208 Volt CS8365C 3-Phase Input (12xC13/12xC19)NA Monitored PDU

D9N58A

HP 16.6kVA 400 Volt IEC309 30A 3-Phase Input (12xC13/12xC19) NA Monitored PDU

D9N62A

HP 17.3kVA 208 Volt IEC309 60A 3-Phase Input (12xC13/12xC19) NA/JP Monitored PDU

D9N59A

480/277 Volt Models

HP 19.9kVA 480 Volt 3-Phase (30 Outlet) NA Monitored PDU

D9N63A

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Models

DA - 14669 North America — Version 7 — May 9, 2014

Page 2

Key Features List

Remote power monitoring with billing grade 99% accuracy
Local or LDAP authentication
LCD Display on the PDU for local monitoring
Ultra-thin one piece design does not interfere with rear maintenance
1U and vertical form factors with flexible mounting options
Industry standard button and keyhole mounting of vertical models for easy drop in installation
Color coded load segment designations
Daisy chain up to 2 PDUs on the same IP address
Optional environment sensor measures temperature and humidity
Models range from 2.8kVA to 22kVA

Billing grade accuracy

All HP Remote Monitoring PDUs meet IEC 62053-21, Class 1 standards for ±1% or better accuracy in power
monitoring of:

Amperage
Voltage
Wattage
Kilowatts per hour

A LCD screen on the HP Remote Monitored PDU provides local monitoring and local alert indications.

Remote monitoring and management is available via Telnet or a standard web browser.

Flexible Software

Easy to use CLI and web interfaces
Local and LDAP security with multiple access levels
HTTP, HTTPS, Telnet/SSH protocols
IPv4 and IPv6 compatible
SNMPv1 and SNMPv3 compatible
Email alert notifications
User settable alert thresholds
Event logs

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Standard Features

DA - 14669 North America — Version 7 — May 9, 2014

Page 3

Multiple models for
flexible installation

The HP Remote Monitoring PDUs are available in four form factors for a variety of racks and environments.
All HP Remote Monitoring PDUs can be mounted to stay completely out of the critical rear maintenance
path needed to service IT equipment in the rack. All vertical models use industry standard button and
keyhole mounting for simple drop in installation in HP 11000 G2 and Intelligent Series racks and many
third party racks.

1U PDUs

Mounts in 1U of space in any EIA standard rack. Available in either a low voltage model with twelve NEMA
5-20 receptacles or high voltage models with twelve IEC C13 outlets.

Vertical PDUs

A variety of sizes meet the needs of many environments
Mounts vertically on either side in the rear of the rack using industry standard button and keyhole
mounting.
Standard mounting faces the outlet towards the rear of the rack. This configuration fully prevents
interference in the maintenance zone between rear RETMA rails.
Using the optional configuration of facing the outlets into the rack, multiple PDUs can be mounted
on one side of the rack for higher power density.

*

NOTE:

Facing the outlets into the rack will interfere with the lower few rack U spaces of the rear

maintenance zone due to breakers on the PDUs.

Vertical PDU Form Factors

Half Height PDU

Designed to fit in 22U and taller racks
Up to 4 Half Height PDUs can be mounted in one side of a 42U or 47U rack using the optional
inward facing configuration.

Mid Height PDUs

Designed to fit in 36U and taller racks
New Three Phase Dual Voltage models provide three NEMA 5-20 convenience outlets for low
voltage equipment in high voltage racks.

Full Height PDUs

Designed for 42U and taller racks.

480V PDUs

Full height form factor for 42U and taller racks
480V three phase 5 wire input provides 277V single phase output.
Unique outlets prevent connection of non-277V compatible equipment.

NOTE:

When mounted in the standard rear facing configuration only 1 Mid or Full Height PDU can be
mounted per side of the rack. Up to 2 Half Height PDUs can be mounted per side in the standard rear facing
configuration in a 42U or taller rack.

Environmental
monitoring

An optional environmental sensor attaches to the HP Remote Monitoring PDU and can measure air
temperature and humidity in the front or rear of the rack. The environmental senor will send alerts over
the network based on user defined thresholds.

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Standard Features

DA - 14669 North America — Version 7 — May 9, 2014

Page 4

Easy Installation and
compatibility

Standard button and keyhole mounting provides simple drop in installation in HP 11000 G2 Series racks,
Intelligent Series Racks, and many third party racks.

Warranty Upgrade
Options

HP Remote Monitoring PDUs are backed by a limited 3-year warranty.
HP Remote Monitoring PDUs automatically assume the Care Pack coverage level of any covered ProLiant
server in the same rack.

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Standard Features

DA - 14669 North America — Version 7 — May 9, 2014

Page 5

HP Care Pack Services

Care Pack services provide a range of life cycle support options that let you choose the service levels that
meet your business requirements, from basic to mission-critical.

A full range of HP Care Pack hardware and software services are available including:

Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7
days call window with options including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and
VMWare-based IT solutions helping to deliver high level of application availability. Response times
range from 30 mins for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support Solution

NOTE:

For more information on HP Care Pack services, contact any of our worldwide sales offices or
resellers or visit our worldwide Web site on the internet at:

http://www.hp.com/hps/carepack

NOTE:

For more complete information on HP Services offerings, customers and resellers, please visit us at:

http://www.hp.com/hps

NOTE:

Additional information regarding worldwide limited warranty and technical support is available at:

http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Service and Support

DA - 14669 North America — Version 7 — May 9, 2014

Page 6

HP Environmental Sensor
for Remote Monitored
PDUs

HP Environmental Sensor for Remote Monitored PDUsThe HP Environmental Sensor
collets temperature and humidity information in the rack and can be monitored via the
local LCD display or remotely using Telnet or a standard web interface. The sensor can
also monitor the status of two user supplied contact devices.

E2D53A

Hot installable and hot swappable
User selectable alarm thresholds
Measure temperature from 32oF to 158oF (0oC to 70oC) with an accuracy of
±3.6oF (±2oC)
Measures relative humidity from 10% to 90% with an accuracy of ±5%
Supports normally open and normally closed contact devices

NOTE:

The HP Environmental Sensor comes with a 6 foot RJ45-RJ45 cable and can be
mounted in various locations within the rack using the supplied Velcro strips or
mounting screw. RJ45 cables up to 30 feet (9.1m) long may be used.

NOTE:

One environmental sensor may be installed per HP Remote Monitored PDU

HP Country specific C19
PDU Inlet Cords for
D9N45A and D9N46A
(required)

HP C19 - Nema L6-20P NA/JP 250V 20Amp High Voltage 3.6m Power Cord

AF593A

HP C19 - NBR-14136 BR 250V 16Amp 2.5m Power Cord

AF592A

HP C19 - GB-1002 CN 250V 16Amp 2.5m Power Cord

AF584A

HP C19 - IS-1293 IN/PK/BD 250V 16Amp 2.5m Power Cord

AF582A

HP C19 - ISI-32 IL 250V 16Amp 2.5m Power Cord

AF583A

HP C19 - AS3112-3 AU/NZ 250V 15Amp 3.6m Power Cord

AF577A

HP C19 - IEC-309 DK/SE/AR 250V 16Amp 3.6m Power Cord

AF581A

HP C19 - CEE-VII EU 250V 16Amp 3.6m Power Cord

AF576A

HP C19 - CEI-23-50 IT/CL 250V 16Amp 3.6m Power Cord

AF580A

HP C19 - SABS-164 ZA 250V 16Amp 3.6m Power Cord

AF579A

HP C19 - BS-1363/A UK/HK/SG 250V 13Amp 3.6m Power Cord

359615-031

HP 240 VAC 4.5M Unterminated End NA Power Cord

E7806A

NOTE:

Please refer to the Power Cord Matrix for more information on power cords/cable
part numbers, input/output descriptions:

http://www.hp.com/go/powercordmatrix

.

HP Jumper Cables

HP C13 - C14 WW 250V 10A Gray 0.7m Jumper Cord

A0K03A

HP C13 - C14 WW 250V 10Amp 0.7m Jumper Cord

142257-B28

HP C13 - C14 WW 250V 10Amp 1.4m Jumper Cord

142257-006

HP C13 - C14 WW 250V 10A Gray 1.37m Jumper Cord

A0K04A

HP C13 - C14 WW 250V 10Amp 1.4m 15 pc Jumper Cord

142257-007

HP C13 - C14 WW 250V 10Amp 2.0m Jumper Cord

A0K02A

HP C13 - C14 WW 250V 10Amp Flint Gray 2.0m Jumper Cord

AF573A

HP C13 - C14 WW 250V 10Amp 2.5m Jumper Cord

142257-002

HP C13 - C14 WW 250V 10Amp 3.0m Jumper Cord

142257-003

HP C13 - C14 WW 250V 10A Gray 3.0m Jumper Cord

A0K06A

HP C20 - C13 WW 250V 15Amp 2.0m Jumper Cord

AF590A

HP C19 - C20 WW 250V 16Amp Flint Gray 1.20m Jumper Cord

AF575A

HP C19 - C20 WW 250V 16Amp Flint Gray 2.0m Jumper Cord

AF574A

HP C19 - C20 WW 250V 16Amp 2.5m Jumper Cord

295633-B22

HP 200-250V 10A C15 to C14 .76m Jumper Cable

E7807A

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Related Options

DA - 14669 North America — Version 7 — May 9, 2014

Page 7

NOTE:

Please refer to the Power Cord Matrix for more information on power cords/cable
part numbers, input/output descriptions:

http://www.hp.com/go/powercordmatrix

.

HP Mounting Brackets

HP Vertical PDU 10K G2 Mounting Kit

NOTE:

Allows HP Basic and Remote Monitored PDU vertical models to be mounted in HP
10000 G2 series racks and in the HP V142 rack. This bracket is not needed for mounting
in the HP 11000G2 or Intelligent Series racks. PDUs may interfere with the rear
maintenance zone when using these brackets.

H6L32A

HP 277 Volt options for
D9N63A

HP LS-26 to LS-25 277 Volt 15Amp AC 0.76m Jumper Cord

TK801A

HP LS-26 to LS-25 277 Volt 15Amp AC 1.37M Jumper Cord

TK802A

HP 800VA - 277V Input / 230V Output NA Rack Mount Transformer

H3X09A

NOTE:

720 watt, 2U transformer converts 277V to 230V for up to 4 devices.

NOTE:

Cord lengths listed are total length including connectors

NOTE:

Please refer to the Power Cord Matrix for more information on power cords/cable
part numbers, input/output descriptions:

http://www.hp.com/go/powercordmatrix

.

HP LS26 to LS-25 jumper cables are compatible with the following 94% efficient HP
Common Slot power supplies

HP 500W Common Slot 277VAC Hot Plug Power Supply Kit

717362-B21

HP 750W Common Slot 277VAC Hot Plug Power Supply Kit

717364-B21

HP 1200W Common Slot 277VAC Hot Plug Power Supply Kit

717359-B21

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Related Options

DA - 14669 North America — Version 7 — May 9, 2014

Page 8

Model Selection Matrix - HP Remote Monitored PDUs
HP Remote Monitoring PDUs 1U models

Model

Part Number

Input Circuit

Current
Maximum

Load capacity

Input
Connection

Output circuit
breakers

Outlet
Connections

2.8kVA PDU

D9N43A

100-120V
30A

24A

2880VA
@120V

8ft(2.4m) cord
with attached
NEMA L5-30P

2 x 20A

12 x NEMA 5­20R

3.6kVA PDU

D9N46A

200-240V
16-20A

16A

3680VA
@230V

Detachable
input power
cord with an IEC
320-C20 inlet
on PDU

*

n/a

12 x IEC C13

4.9kVA PDU

D9N44A

200-240V
30A

24A

4992VA @208V

8ft(2.4m) cord
with attached
NEMA L6-30P

2 x 20A

12 x IEC C13

Half Height vertical models

Model

Part Number

Input Voltage

Current
Maximum

Load capacity

Input
Connection

Output circuit
breaker

Outlet
Connections

3.6kVA PDU

D9N45A

200-240V
16-20A

16A

3680VA
@230V

Detachable
input power
cord with an IEC
320-C20 inlet
on PDU

*

n/a

16 x IEC C13

Mid Height vertical models

Model

Part Number

Input Voltage

Current
Maximum

Load capacity

Input
Connection

Output circuit
breaker

Outlet
Connections

4.9kVA PDU

D9N47A

200-240V
30A

24A

4992VA @208V

8ft(2.4m) cord
with attached
NEMA L6-30P

2 x 20A

20 x IEC C13
4 x IEC C19

7.3kVA PDU

D9N48A

200-240V
32A

32A

7360VA @230V

8ft(2.4m) cord
with attached
IEC 332P6
Splashproof

2 x 16A

20 x IEC C13
4 x IEC C19

5.7kVA Dual
Voltage PDU

D9N52A

200-208V
20A
3 Phase WYE

27.7A

5764VA @208V
3 Phase

8ft(2.4m) cord
with attached
NEMA L21-20P

n/a

18 x IEC C13
3 x NEMA 5-20R

8.6kVA Dual
Voltage PDU

D9N53A

200-208V
30A
3 Phase WYE

41.5A

8646VA @208V
3 Phase

8ft(2.4m) cord
with attached
NEMA L21-30P

3 x 20A

18 x IEC C13
3 x IEC C19
3 x NEMA 5-20R

8.6kVA PDU

D9N51A

200-208V
30A
3 Phase Delta

41.5A

8646VA @208V
3 Phase

8ft(2.4m) cord
with attached
NEMA 15-30P

3 x 20A

18 x IEC C13
3 x IEC C19

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Remote Monitoring PDU Family Information

DA - 14669 North America — Version 7 — May 9, 2014

Page 9

11kVA PDU

D9N55A

380-415V
16A
3 Phase WYE

16A/phase

11040VA
@ 400V 3 Phase

8ft(2.4m) cord
with attached
IEC 516P6
Splashproof

n/a

18 x IEC C13
3 x IEC C19

Full Height vertical models

Model

Part Number

Input Voltage

Current
Maximum

Load capacity

Input
Connection

Output circuit
breaker

Outlet
Connections

7.3kVA PDU

D9N50A

200-240V
32A

32A

7360VA @230V

8ft(2.4m) cord
with attached
IEC 332P6
Splashproof

2 x 16A

32 x IEC C13
4 x IEC C19

8.3kVA PDU

D9N49A

200-240V
50A

40A

8320VA @208V

8ft(2.4m) cord
with attached
CS8265C

3 x 20A

30 x IEC C13
3 x IEC C19

11kVA PDU

D9N57A

380-415V
16A
3 Phase WYE

16A/phase

11040VA
@ 400V 3 Phase

8ft(2.4m) cord
with attached
IEC 516P6
Splashproof

n/a

30 x IEC C13
3 x IEC C19

16.6kVA PDU

D9N61A

380-415V
30A
3 Phase WYE

24A/phase

16560VA @
400V 3 Phase

8ft(2.4m) cord
with attached
IEC 532P6
Splashproof

6 x 20A

30 x IEC C13
3 x IEC C19

17.3kVA PDU

D9N54A

200-208V
60A
3 Phase Delta

83.04A

17292VA @
208V 3 Phase

8ft(2.4m) cord
with attached
IEC 460P9
Splashproof

6 x 20A

24 x IEC C13
3 x IEC C19

22kVA PDU

D9N56A

380-415V
32A
3 Phase WYE

32A/phase

22080VA @
400V 3 Phase

8ft(2.4m) cord
with attached
IEC 532P6
Splashproof

6 x16A

30 x IEC C13
3 x IEC C19

14.4kVA PDU

D9N58A

200-208V
50A
3 Phase Delta

69.28A

14410VA @
208V 3 Phase

8ft(2.4m) cord
with attached
CS8365C

6 x 20A

12 x IEC C13
12 x IEC C19

16.6kVA PDU

D9N62A

380-415V
30A
3 Phase WYE

24A/phase

16560VA @
400V 3 Phase

8ft(2.4m) cord
with attached
IEC 532P6
Splashproof

6 x 20A

12 x IEC C13
12 x IEC C19

17.3kVA PDU

D9N59A

200-208V
60A
3 Phase Delta

83.04A

17292VA @
208V 3 Phase

8ft(2.4m) cord
with attached
IEC 460P9
Splashproof

6 x 20A

12 x IEC C13
12 x IEC C19

22kVA PDU

D9N60A

380-415V
32A
3 Phase WYE

32A/phase

22080VA @
400V 3 Phase

8ft(2.4m) cord
with attached
IEC 532P6
Splashproof

6 x16A

12 x IEC C13
12 x IEC C19

480/277 Volt model

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Remote Monitoring PDU Family Information

DA - 14669 North America — Version 7 — May 9, 2014

Page 10

19.9kVA PDU

D9N63A

480V 30A 3
Phase WYE

24A /phase

19944VA
@480V 3 Phase

8ft(2.4M) cord
with attached
NEMA L22-30P

6 x 20A

30 x RF203P­HP
(LS-26)

* HP Remote Monitored PDU models D9N45A and D9N46A require an IEC 320-C19 to country specific plug inlet cord which is sold
separately.

NOTE:

Please refer to the Power Cord Matrix for more information on power cords/cable part numbers, input/output descriptions.

http://www.hp.com/go/powercordmatrix

.

Disclaimer:

HP makes no recommendations regarding power connector manufactures. Please consult a licensed professional to

determine the best connector or receptacle for your specific needs.

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Remote Monitoring PDU Family Information

DA - 14669 North America — Version 7 — May 9, 2014

Page 11

All PDUs

Operational Temperature

50° to 140° F (10° to 60° C)

Operating Relative Humidity (%)

10% to 90%

Operating Elevation

0 to 10,000 ft (0 to 3048 m)

Storage Temperature

-4° to 140° F (-20° to 60° C)

Storage Relative Humidity (%)

5% to 95%

Storage Elevation

0 to 30,000 ft (0 to 9144 m)

Input Plug Length (attached cord units)

96 inches (243.8 cm)

Conformance Standards

UL, CUL, VCCI - NA/JPN models
CE, TUV, KC, EAC, KCC, ACMA - INTL models
UL, CUL, CE, TUV, KC, EAC, KCC, VCCI, ACMA - WW models

Mechanical Dimensions (WxHxD) - 1U models

17.25 x 1.71 x 6.16 in (43.8 x 4.34 x 15.65 cm)

Mechanical Dimensions (WxHxD) - Half Height
models

2.05 x 30 x 2.05 (5.2 x 76.2 x 5.2 cm)

Mechanical Dimensions (WxHxD) - Mid Height models

2.05 x 56.12 x 2.05in (5.2 x 142.54 x 5.2 cm)

Mechanical Dimensions (WxHxD) - Full Height models

2.05 x 66.59 x2.05 in (5.2 x 169.14 x5.2)

Kit Contents - All Remote Monitored PDUs

All models ship with:

Mounting buttons or hardware
Tie wraps for cable retention
Shipping bracket (vertical models only)
6ft RJ45-RJ45 communications cable
6ft RJ45-DB9 Serial cable
Read me first card

Environment-friendly
Products and Approach

End-of-life Management
and Recycling

Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:

http://www.hp.com/go/green

. To recycle your product, please go to:

http://www.hp.com/go/green

or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.

The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at:

http://www.hp.com/go/green

. These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Technical Specifications

DA - 14669 North America — Version 7 — May 9, 2014

Page 12

© Copyright 2014 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.

QuickSpecs

HP Remote Monitored Power Distribution Units (mPDU)

Technical Specifications

DA - 14669 North America — Version 7 — May 9, 2014

Page 13