HP Compaq SP700 Maintenance And Service Manual

Professional Workstation SP700

Maintenance and Serv ice Guide

Second Edition (February 1999)
Part Number 328569-002
Spares Part Number 329342- 001
Compaq Computer Corporation

Notice

The information in this publication is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR

EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING,
PERFORMANCE, OR USE OF THIS MATERIAL. THIS INFORMATION IS PROVIDED

“AS IS” AND COMPAQ COMPUTER CORPORATION DISCLAIMS ANY WARRANTIES,
EXPRESS, IMPLIED OR STATUTORY AND EXPRESSLY DISCLAIMS THE IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE,
GOOD TITLE AND AGAINST INFRINGEMENT.

This publication contains information pr otected by copyright. No part of this public ation may be
photocopied or reproduced in any form without prior written consent from Compaq Computer
Corporation.

 1999 Compaq Computer Corporation.
All rights reserved. Printed in the U.S.A.

The software descr i bed in this guide is furnished under a license agreement or nondisclosure
agreement. The software may be used or copied only in accordance with the terms of the
agreement.

Compaq, Fastart, Compaq Insight Manager, ROMPaq, QVision, SmartStart, NetFlex,
QuickFind, and PaqFax are registered in the United States Patent and Trademark Office.

Netelligent and SoftPaq are trademarks and/or service marks of Compaq Computer Corporation.
Microsoft, MS-DOS , Windows, and Windows NT are re gistered trademarks of M i crosoft

Corporation.
Other product names mentioned herein may be trademarks and/or registered trademarks of their

respective companies.

Compaq Professional Workstation SP700 Maintenance and Service Guide

Second Edition (February 1999)
Part Number 328569-002
Spares Part Number 329342-001

Contents

About This Guide

Symbols in Text......................................................................................................................... vii

Where to Go for Additional Help..............................................................................................vii

Other Information Sources.................................................................................................vii

Integrated Management Display........................................................................................viii

Telephone Numbers...........................................................................................................viii

Chapter 1

Illustrated Parts Catalog

Mechanical Parts ...................................................................................................................... 1-1

System Components .................................................................................................................1-2

Spares Parts List.......................................................................................................................1-3

Chapter 2

Service Preliminaries

Compaq Technician Notes........................................................................................................2-1

Preliminary Warnings and Cautions.........................................................................................2-3

Electrostatic Discharge Information.........................................................................................2-4

Equipment Symbols..................................................................................................................2-4

Tools and Software Requirements............................................................................................2-5

Warranty Information...............................................................................................................2-5

iii

Chapter 3

Removal and Replacement Procedures

Serial Number...........................................................................................................................3-1

Service Preparations.................................................................................................................3-2

Cable Lock ...............................................................................................................................3-3

Workstation Feet.......................................................................................................................3-4

Side Access Panel.....................................................................................................................3-5

Front Bezel...............................................................................................................................3-6

Blank Drive Bezel....................................................................................................................3-7

EMI/Cooling Shield..................................................................................................................3-8

Speaker.....................................................................................................................................3-9

I/O Bracket Assembly ............................................................................................................3-10

Important Guidelines for I/O Bracket Assembly Replacement.......................................3-11

Expansion Boards...................................................................................................................3-12

Identifying PCI and ISA Expansion Slots........................................................................3-12

Removing PCI or ISA Expansion Boards........................................................................3-14

Removing a Symbios Wide Ultra2 PCI SCSI Controller ................................................3-15

Removing the Accelerated Graphics Port (AGP) Graphics Controller............................3-15

PowerStorm 600 Graphics Controller.....................................................................................3-17

Removing the Rendering Accelerator (PCI) Board.........................................................3-17

Removing the Geometry Accelerator (AGP) Board........................................................3-18

Removing the Fan Bracket Assembly .............................................................................3-20

Removing the Card Guide...............................................................................................3-22

Removing the Backplane Board......................................................................................3-23

System Fan.............................................................................................................................3-24

Compaq Professional Workstation SP700 Maintenance and Service Guide