HP Compaq Presario 17XL562 Quick Guide

CCCCAAAAB
B FFFFil
ileeeessss
B B
ilil
If you add new hardware such as a printer or a game pad to your computer, you may be prompted to insert the Windows installation CD or diskettes. If this occurs, follow these steps:
1. In Windows Explorer, navigate to the
WINDOWS\OPTIONS\CABS directory on the hard drive.
2. Click OK and follow the instructions on your screen.
Th
The
e CCCCoooommmmppppaaaaq E
ThTh
e e
q Emmmmeeeerrrrggggeeeennnnccccy
q Eq E
y DDDDiiiisssskkkk
y y
If your computer lost its original preinstalled software information, you need this Emergency Diskette to perform the Factory Restore. This diskette has the information of the original preinstall system that is required by the QuickRestore program. To make the Compaq Emergency Diskette, complete the following steps:
1. Prepare one formatted empty floppy diskette.
2. Click Start and select Help, at the Help and Support
page, click Restore My Presario, then select Compaq QuickRestore. Follow the instructions on the screen.
QQQQuuuuiiiicccckkkkRRRReeeessssttttoooorrrreeee
CCCCoooommmmppppaaaaq
The QuickRestore allows you to choose one of the following restores. Read through all the following information before deciding which type of QuickRestore you want to perform.
q PPPPrrrreeeessssaaaarrrriiiio
q q
Fa
Faccccttttoooorrrry
y RRRReeeessssttttoooorrrreeee
FaFa
y y
UUUUsssseeeer
r BBBBaaaacccckkkkup
r r
UUUUsssseeeer
r RRRReeeessssttttoooorrrreeee
r r
SSSSeeeelllleeeeccccttttiiiivvvveeee RRRReeeessssttttoooorrrreeee
EEEEmmmmeeeerrrrggggeeeennnnccccyyyy DDDDiiiisssske
kett
tteeee
keke
tttt
o CCCCoooommmmpu
putttteeeerrrrssss
o o
pupu
NO
NOTE
TE:::: Do not leave your computer unattended while
NONO
TETE QuickRestore is running. You are periodically required to enter information. If you do not enter the required information, your computer may not complete the QuickRestore process.
DDDDeeeessssccccrrrriiiippppttttiiiioooonnnn
Returns your computer to its original preinstalled software state and reformats your hard drive.
up Save your C: drive state into D: drive.
upup
Returns your C: drive to its last backed up software state.
Allows you to select Compaq drivers or applications you want to reinstall without reformatting your hard drive.
Make Emergency Diskette to return to original preinstalled software state.
NO
NOTTTTIIIICCCCEEEE
NONO
The information in this card is subject to change without notice.
COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR
TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED
HEREIN, NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE FURNISHING, PERFORMANCE,
This card contains information protected by copyright. No part of this card may be
photocopied or reproduced in any form without prior written consent from
© 2000 Compaq Computer Corporation. All rights reserved. Printed in the U.S.A.
Compaq and Presario are registered in the U.S. Patent and Trademark Office.
The software described in this card is furnished under a license agreement or
nondisclosure agreement. The software may be used or copied only in accordance
Product names mentioned herein may be trademarks and/or registered trademarks
OR USE OF THIS MATERIAL.
Compaq Computer Corporation.
with the terms of the agreement.
of their respective companies.
QuickRestore
Compaq Presario Computers
Second Edition (September 2000)
192843-002
Fa
Faccccttttoooorrrry
y RRRReeeessssttttoooorrrreeee
FaFa
y y
UUUUsssseeeer
r BBBBaaaacccckkkkup
r r
up
upup
Factory Restore allows you to restore your computer to its original factory condition. To perform a Factory Restore, complete the following steps.
CCCCAAAAUUUUTTTTIIIIOOOONNNN:::: Factory Restore deletes all data on your computer’s hard drive. If you have added personal files, software, or data
1. Insert the QuickRestore CD into your CD or DVD drive.
2. Reboot the system.
3. Select Factory Restore from the menu screen if any.
4. QuickRestore CD and the Welcome screen displays.
5. Read the message, then press Enter to continue. A Re-
6. An Important Notice screen will display. This screen
since you purchased your computer, copy this data to diskettes or save the data to an external storage device before proceeding.
Partitioning Notice screen will display, if it is needed.
CCCCAAAAUUUUTTTTIIIIOOOONNNN:::: Once do re-partitioning, the data on HDD can not be recover anymore. If you have added personal files, software, or data since you purchased your computer, copy this data to diskettes or save the data to an external storage device before proceeding.
outlines the terms and conditions of using this CD.
User Backup backs up the current C: drive state to D: drive. This backup can be use by User Restore.
To perform the User Backup, complete the following steps:
1. Insert the QuickRestore CD into your CD or DVD drive.
2. Reboot the system.
3. Select User Backup to begin the User Backup.
NO
NOTE
TE:::: If D: drive does not have enough room to perform the back
NONO
TETE
UUUUsssseeeer
User Restore restores the C: drive from the backup made by the last User Backup. This option reformats the C: drive removing all data and restores the last User Backup.
 
up, you will be prompted to allow the software to increase your partition size on D: drive.
r RRRReeeessssttttoooorrrreeee
r r
CCCCAAAAUUUUTTTTIIIIOOOONNNN:::: User Restore deletes all data on your computer’s C: drive. If you have added personal files, software, or data since you purchased your computer, copy this data to diskettes or save the data to an external storage device before proceeding.
NO
NOTE
TE:::: If you have not done User Backup before, User Restore will
NONO
TETE not be available.
7. Press Enter. The Recovery Disk screen will prompt you
to insert the disk into your floppy disk drive.
NO
NOTE
TE:::: If you have used this CD to restore your computer before,
NONO
TETE
8. Press Enter. A Warning screen will display.
9. Press Enter to continue.
During the restoration process, a status bar indicates the percentage of software loaded onto the hard disk. When the system ejects QuickRestore CD, Remove the CD and press Enter to continue the process.
the Recovery Disk screen will not display. The CD saves the system information.
CCCCAAAAUUUUTTTTIIIIOOOONNNN:::: If you have not copied or backed up your personal files, software, or other data onto diskettes,
permanently deleted!
they will be
To perform the User Restore, complete the following steps:
1. Insert the QuickRestore CD into your CD or DVD drive.
2. Reboot the system
3. Select User Restore to begin the User Restore.
SSSSeeeelllleeeeccccttttiiiivvvve
Selective Restore allows you to select the Compaq drivers or applications you want to reinstall without reformatting your hard drive. To perform a Selective Restore on your computer, complete the following steps:
e RRRReeeessssttttoooorrrreeee
e e
1. Click Start and select Help, at the Help and Support
page, click Restore My Presario, then select Compaq QuickRestore.
2. Click the Selective Restore button. The Selective
Restore menu is displayed. From the Selective Restore menu, you can choose several options.
3. Click the icon representing the application or driver you
want to reinstall.
4. A progress bar indicates the software is installing.
5. Once the Custom Restore is finished, it will prompt you
to restart your computer.
6. Repeat steps 3 through 5 of this procedure to reinstall as
many drivers or applications as your need.
Loading...