Compaq Evo Notebook N620c Series
Compaq Evo Notebook N610c Series
Compaq Evo Notebook N610v Series
Compaq Evo Notebook N600c Series
Document Part Number: 279362-003
May 2003
This guide is a troubleshooting reference used for maintaining
and servicing the notebook. It provides comprehensive
information on identifying notebook features, components, and
spare parts, troubleshooting notebook problems, and performing
notebook disassembly procedures.
Microsoft and Windows are trademarks of Microsoft Corporation in the U.S.
and/or other countries. Intel, Pentium, and SpeedStep are trademarks of Intel
Corporation in U.S. and/or other countries.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be
construed as constituting an additional warranty. HP shall not be liable for
technical or editorials errors or omissions contained herein.
Maintenance and Service Guide
Third Edition May 2003
First Edition July 2002
Document Part Number: 279362-003
The Compaq Evo Notebook N620c, N610c, N610v, and N600c
Series offer advanced modularity, Mobile Intel Pentium 4 and
Pentium III processors with 64-bit architecture, industry-leading
Accelerated Graphics Port (AGP) implementation, and extensive
multimedia support.
Figure 1-1. Compaq Evo Notebook N620c, N610c, N610v,
and N600c Series
Maintenance and Service Guide1–1
Product Description
1.1Models
Computer models are shown in Tables 1-1 through 1-5.
Table 1-1
Compaq Evo Notebook N620c, N610c, N610v, and N600c
Model Naming Conventions
Key
N620P4200P440VC25OXXXXXX-XXX
12345678910
KeyDescriptionOptions
1Brand/Series
designator
2Processor typeP4 = Intel Pentium 4P3 = Intel Pentium III
3Processor speed200 = 2.0 Ghz
N = Notebook620 = N620c series
6c = N610c series
6v = N610v series
600 = N600c series
Asia Pacific
Australia
Belgium
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece/Poland
Hong Kong
Hungary
Israel
Italy
Japan
Japan (English)
Korea
Latin America
Latin America
Asia Pacific
Australia
Belgium
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece/Poland
Hong Kong
Hungary
Israel
Italy
Japan
Japan (English)
Korea
Asia Pacific
Australia
Belgium
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece/Poland
Hong Kong
Hungary
Israel
Italy
Japan
Japan (English)
Korea
Latin America
Latin America
Asia Pacific
Australia
Belgium
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece/Poland
Hong Kong
Hungary
Israel
Italy
Japan
Japan (English)
Korea
Latin America
The Netherlands
and
470053-676
470053-688
470053-678
470053-680
470053-607
1–26Maintenance and Service Guide
Table 1-5
Compaq Evo Notebook N600c Models
N600P3120X430VC25O
(Continued)
Product Description
Asia Pacific
Australia
Belgium
Brazil
Czech Republic
Denmark
France
French Canada
Germany
Greece/Poland
Hong Kong
Hungary
Israel
Italy
Japan
Japan (English)
Korea
Latin America
The Netherlands
■The following processors are available, varying by notebook
model:
❏The Evo Notebook N620c features an Intel Pentium-M
1.6-, 1.5-, 1.4-, or 1.3-GHz processor, with 512-KB
integrated L2 cache.
❏The Evo Notebook N610c features a Mobile Intel
Pentium 4 2.0-, 1.9-, 1.8-, 1.7-, or 1.6-GHz processor,
with 512-KB integrated L2 cache.
❏The Evo Notebook N610v features a Mobile Intel
Pentium 4 2.4-, 2.2-, or 2.0-GHz processor, with 512-KB
integrated L2 cache.
❏The Evo Notebook N600c features a Mobile Intel
Pentium III 1.066 GHz-M or 866-MHz-M processor,
with 512-KB integrated L2 cache.
■ATI Mobility Radeon with 64-bit video graphics,
16-MB double date rate (DDR) SDRAM, 4X AGP
graphics card
Product Description
■The following memory configurations are available, varying
by notebook model:
❏The Evo Notebook N620c, N610c, and N610v feature
256-MB high-performance Synchronous DRAM
(SDRAM), expandable to 2048 MB
❏The Evo Notebook N600c features 256- or 128-MB
high-performance Synchronous DRAM (SDRAM),
expandable to 1024 MB
■Microsoft Windows 98 SE, Windows 2000, or Windows XP
preinstalled, varying by notebook model
■14.1-inch, SXGA+ (1400 × 1050) or XGA (1024 × 768),
TFT display with over 16.8 million colors, varying by
computer model
Maintenance and Service Guide1–29
Product Description
■Full-size TouchPad or Dual Stick keyboard, varying by
notebook model
■Mini PCI 10/100 network interface card (NIC) or Mini
PCI V.90 modem plus 10/100 NIC combination card,
varying by notebook model
■Support for two Type II PC Card slots with support for both
32-bit CardBus and 16-bit PC Cards
■External AC adapter with power cord
■8-cell Li ion battery pack
■60-, 40-, 30-, 20-, 15-, or 10-GB high-capacity hard drive
■Connectors for:
❏RJ-11 modem
❏Mono microphone
❏Stereo line-out/headphone
❏MultiPort
❏Universal serial bus (USB)
❏Docking
❏Parallel devices
❏Serial devices
❏Composite TV
❏External keyboard/mouse
❏RJ-45 network
❏External monitor
❏AC power
■Stereo speakers providing Compaq Premier Sound 16-bit
stereo sound
1–30Maintenance and Service Guide
1.3Clearing a Password
If the notebook you are servicing has an unknown password,
follow these steps to clear the password. These steps also
clear CMOS.
1. Prepare the notebook for disassembly (refer to Section 5.3,
“Preparing the Notebook for Disassembly,” for more
information).
2. Remove the RTC battery (refer to Section 5.6, “Disk Cell
RTC Battery”).
3. Wait approximately five minutes.
4. Replace the RTC battery and reassemble the notebook.
5. Connect AC power to the notebook. Do not reinsert any
battery packs at this time.
6. Turn on the notebook.
All passwords and all CMOS settings have been cleared.
1.4Power Management
Product Description
The notebook comes with power management features that
extend battery operating time and conserve power. The notebook
supports the following power management features:
■Standby
■Hibernation
■Setting customization by the user
■Hotkeys for setting level of performance
■Smart battery that provides an accurate battery power gauge
■Battery calibration
■Lid switch suspend/resume
■Power/suspend button
■Advanced Configuration and Power Management (ACP)
compliance
Maintenance and Service Guide1–31
Product Description
1.5Notebook External Components
The external components on the front and right side of the
Evo Notebook N620c, N610c, N610v, and N600c are shown in
Figure 1-2 and described in Table 1-5.
.
Figure 1-2. Front and Right Side Components
Table 1-5
Front and Right Side Panel Components
ItemComponentFunction
1Power lightOn: Power is turned on.
Blinking: Notebook is in Standby. The power
light also blinks if a battery pack that is the
only available power source reaches a
low-battery condition.
2Battery lightOn: A battery pack is charging.
Blinking: A battery pack that is the only
available power source has reached a
low-battery condition.
1–32Maintenance and Service Guide
Product Description
Table 1-5
Front and Right Side Panel Components
ItemComponentFunction
3Drive activity lightTurns on when the hard drive, CD-, or
DVD-ROM drive is accessed.
4Media Bay lightTurns on when the diskette drive in the
Media Bay or the optional external diskette
drive is accessed.
5Infrared portLinks to another IrDA-compliant device for
wireless communication.
6Volume control buttonsAdjust the volume of the stereo speakers.
7Stereo line-out/
headphone jack
8Mono microphone jackConnects a mono microphone, disabling the
9Display release latchOpens the notebook.
10Security cable slotAttaches an optional security cable to the
Connects stereo speakers, headphones,
headset, or television audio.
built-in microphone.
notebook.
(Continued)
11Media BayAccepts a diskette drive, CD- or DVD-ROM
drive, or secondary battery pack.
12RJ-11 jack (internal
modem models only)
Connects the modem cable to an internal
modem. A modem cable is included with
internal modem models.
Maintenance and Service Guide1–33
Product Description
The Evo Notebook N620c, N610c, N610v, and N600c right side
and rear panel components are shown in Figure 1-3 and described
in Table 1-6.
Figure 1-3. Right Side and Rear Panel Components—
Evo Notebook N620c, N610c and N610v
Table 1-6
Right Side and Rear Panel Components
ItemComponentFunction
1DC power jackConnects any one of the following:
■AC adapter
■Optional automobile power
adapter/charger
■Optional aircraft power adapter
2Keyboard/mouse
connector
1–34Maintenance and Service Guide
Connects an external keyboard or
PS/2-compatible external mouse. To
connect a keyboard and a mouse at the
same time, use an optional Y-adapter.
Table 1-6
Right Side and Rear Panel Components
ItemComponentFunction
3Parallel connectorConnects a parallel device.
4USB connectors (2)Connect USB devices.
(Continued)
Product Description
5RJ-45 jack
(network models only)
6Serial connectorConnects a serial device.
7External monitor
connector
8S-Video connectorConnects a television, VCR, camcorder, or
9VentAllows airflow to cool internal components.
10Hard driveSupports the removable primary hard drive.
11PC Card slotsSupport a 32-bit (CardBus) or 16-bit
12PC Card eject buttonsEject a PC Card from a PC Card slot.
Connects the network cable. A network
cable is not included with the notebook.
Connects an external monitor or overhead
projector.
overhead projector.
To prevent damage, the notebook
Ä
shuts down if an overheating
condition occurs. Do not block the
cooling vent. Avoid placing the
notebook on a blanket, rug, or other
flexible surface that may cover the
vent area.
PC Card.
Maintenance and Service Guide1–35
Product Description
The Evo Notebook N600c right side and rear panel components
are shown in Figure 1-4 and described in Table 1-7.
Figure 1-4. Right Side and Rear Panel Components—
Evo Notebook N600c
Right Side and Rear Panel Components
Table 1-7
ItemComponentFunction
1MultiPortConnects wireless communication devices,
such as an optional Bluetooth or 802.11b
MultiPort module, and other options.
2DC power jackConnects any one of the following:
■AC adapter
■Optional automobile power
adapter/charger
■Optional aircraft power adapter
1–36Maintenance and Service Guide
Table 1-7
Right Side and Rear Panel Components
ItemComponentFunction
Product Description
(Continued)
3Keyboard/mouse
connector
4Parallel connectorConnects a parallel device.
5Docking connectorConnects the computer to the optional
6Serial connectorConnects a serial device.
7External monitor
connector
8S-Video connectorConnects a television, VCR, camcorder, or
9RJ-45 jack (network
models only)
10USB connectors (2)Connect USB devices.
11VentAllows airflow to cool internal components.
Connects an external keyboard or
PS/2-compatible external mouse. To
connect a keyboard and a mouse at the
same time, use an optional Y-adapter.
expansion base, convenience base, or port
replicator.
Connects an external monitor or overhead
projector.
overhead projector.
Connects the network cable. A network
cable is not included with the computer.
To prevent damage, the notebook
Ä
shuts down if an overheating
condition occurs. Do not block the
cooling vent. Avoid placing the
notebook on a blanket, rug, or other
flexible surface that may cover the
vent area.
12Hard driveSupports the removable primary hard drive.
13PC Card slotsSupport 32-bit (CardBus) or 16-bit PC
Cards.
14PC Card eject buttonsEject PC Cards from the PC Card slots.
Maintenance and Service Guide1–37
Product Description
The Evo Notebook N620c, N610c, and N610v bottom
components are shown in Figure 1-5 and described in Table 1-8.
Figure 1-5. Bottom Components—Evo Notebook N620c,
N610c, and N610v
Table 1-8
Bottom Components
ItemComponentFunction
1Media BayAccepts a diskette drive, CD- or DVD-ROM
drive, or secondary battery pack.
2Media Bay release latchReleases the Media Bay device from the
connector.
1–38Maintenance and Service Guide
Product Description
Table 1-8
Bottom Components
ItemComponentFunction
3Serial numberIdentifies the notebook; needed when you
call Compaq customer support.
4Docking connectorConnects the notebook to the optional
expansion base, convenience base, or port
replicator.
5Air vents (2)Allow airflow to cool internal components.
6FanProvides airflow to cool internal
components.
7Hard driveSupports the removable primary hard drive.
(Continued)
8Hard drive security
screw
9Mini PCI compartment
cover
10Battery release latchReleases the battery pack from the battery
11Battery compartmentHolds the battery pack.
Secures the hard drive.
Covers the memory expansion
compartment that contains two memory
expansion slots for memory expansion
boards.
compartment.
Maintenance and Service Guide1–39
Product Description
The Evo Notebook N600c bottom components are shown in
Figure 1-6 and described in Table 1-9.
Figure 1-6. Bottom Components—Evo Notebook N600c
Table 1-9
Bottom Components
ItemComponentFunction
1Media BayAccepts a diskette drive, optical drive, or
secondary battery pack.
2Media Bay release latchReleases the Media Bay device from the
connector.
1–40Maintenance and Service Guide
Product Description
Table 1-9
Bottom Components
ItemComponentFunction
3VentAllows airflow to cool internal components.
4FanProvides airflow to cool internal
components.
(Continued)
5Certificate of
Authenticity label
6Hard drive security
screw
7Memory expansion
compartment cover
8Docking recess latchSecures the computer to an optional
9Battery release latchReleases the battery pack from the battery
10Battery compartmentHolds the battery pack.
11Serial numberIdentifies the computer; needed when you
Contains the Product Key, which may need
to be entered before using some Windows
operating systems.
Secures the hard drive.
Covers the memory expansion
compartment that contains two memory
expansion slots for memory expansion
boards.
expansion base, convenience base, or port
replicator.
compartment.
call Compaq customer support.
Maintenance and Service Guide1–41
Product Description
The components on the top of the Evo Notebook N620c, N610c,
N610v, and N600c are shown in Figure 1-7 and described in
Table 1-10.
Figure 1-7. Top Components
Table 1-10
Top Components
ItemComponentFunction
1Num lock lightOn: Num lock is on and the embedded
numeric keypad is enabled.
2Scroll lock lightOn: Scroll is on.
3Caps lock lightOn: Caps lock is on.
1–42Maintenance and Service Guide
Product Description
Table 1-10
Top Components
ItemComponentFunction
4Standby buttonTurns on the notebook if it is off.
Initiates and exits Standby.
When pressed with the
Hibernation.
5Stereo speakers (2)Produce stereo sound.
6Easy Access buttons (4)Provide quick access to the Internet. Refer
to the
notebook for information about these
buttons.
7Power switchTurns on the notebook. To turn off the
notebook, use the operating system
Shut Down command.
8Pointing stickMoves the mouse cursor.
(Continued)
Hardware Guide
Fn key, initiates
that ships with the
9Right pointing stick
button
10TouchPadMoves the mouse cursor.
11Right TouchPad buttonFunctions like the right mouse button on an
12Left TouchPad buttonFunctions like the left mouse button on an
13Left pointing stick buttonFunctions like the left mouse button on an
Functions like the right mouse button on an
external mouse.
external mouse.
external mouse.
external mouse.
Maintenance and Service Guide1–43
Product Description
The keyboard components of the Evo Notebook N620c, N610c,
N610v, and N600c are shown in Figure 1-8 and described in
Table 1-11.
Figure 1-8. Keyboard Components
Table 1-11
Keyboard Components
ItemComponentFunction
1
2Embedded numeric
3Cursor control keysMove the cursor around the screen.
4Windows
5Windows logo keyDisplays the Windows Start menu.
6
7Caps lock keyTurns on the caps lock function.
1–44Maintenance and Service Guide
F1 through F12
function keys
keypad
application key
Fn keyUsed with hotkeys to perform preset hotkey
Perform preset functions.
Converts keys to a numeric keypad.
Displays a menu when using a Microsoft
application. The menu is the same one that is
displayed by pressing the right mouse button.
functions.
1.6Design Overview
This section presents a design overview of key parts and features
of the notebook. Refer to Chapter 3, “Illustrated Parts Catalog,”
to identify replacement parts, and Chapter 5, “Removal and
Replacement Procedures,” for disassembly steps. The system
board provides the following device connections:
■Memory expansion board
■Hard drive
■Display
■Keyboard/TouchPad or pointing stick
■Audio
■Intel Pentium 4 and Pentium III processors
■Fan
■PC Card
■Modem or modem/NIC
Product Description
The notebook uses an electrical fan for ventilation. The fan is
controlled by a temperature sensor and is designed to turn on
automatically when high temperature conditions exist. These
conditions are affected by high external temperatures, system
power consumption, power management/battery conservation
configurations, battery fast charging, and software applications.
Exhaust air is displaced through the ventilation grill located on
the left side of the notebook.
CAUTION: To properly ventilate the notebook, allow at least
Ä
a 7.6-cm (3-inch) clearance on the left and right sides of the
notebook.
Maintenance and Service Guide1–45
Troubleshooting
WARNING: Only authorized technicians trained by Compaq should
Å
repair this equipment. All troubleshooting and repair procedures
are detailed to allow only subassembly/module level repair.
Because of the complexity of the individual boards and
subassemblies, no one should attempt to make repairs at the
component level or make modifications to any printed wiring board.
Improper repairs can create a safety hazard. Any indication of
component replacement or printed wiring board modification may
void any warranty or exchange allowances.
2.1Computer Setup and
Diagnostics Utilities
The computer features two Compaq system management utilities:
■Computer Setup—A system information and customization
utility that can be used even when your operating system is
not working or will not load. This utility includes settings that
are not available in Windows.
2
Maintenance and Service Guide2–1
Troubleshooting
■Compaq Diagnostics—A system information and diagnostic
utility that is used within your Windows operating system.
Use this utility whenever possible to:
❏Display system information.
❏Test system components.
❏Troubleshoot a device configuration problem
in Windows 2000, Windows XP Professional, or
Windows XP Home.
Using Computer Setup
Information and settings in Computer Setup are accessed from
the File, Security, or Advanced menus:
1. Turn on or restart the computer. Press
F10 while the
F10 = ROM Based Setup message is displayed in the
lower-left corner of the screen.
❏To change the language, press F2.
❏
To view navigation information, press F1.
❏
To return to the Computer Setup menu, press esc.
2. Select the File, Security, or Advanced menu.
3. To close Computer Setup and restart the computer:
❏Select File > Save Changes and Exit and press enter.
or
❏Select File > Ignore Changes and Exit and press enter.
4. When you are prompted to confirm your action, press F10.
2–2Maintenance and Service Guide
Troubleshooting
Selecting from the File Menu
Table 2-1
File Menu
SelectTo Do This
System Information■View identification information about the
computer, a docking base, and any battery
packs in the system.
■View specification information about the
processor, memory and cache size, and
system ROM.
Save to FloppySave system configuration settings to a diskette.
Restore from FloppyRestore system configuration settings from a
diskette.
Restore DefaultsReplace configuration settings in Computer
Setup with factory default settings. (Identification
information is retained.)
Ignore Changes and ExitCancel changes entered during the current
session, then exit and restart the computer.
Save Changes and ExitSave changes entered during the current
session, then exit and restart the computer.
Maintenance and Service Guide2–3
Troubleshooting
Selecting from the Security Menu
Table 2-2
Security Menu
SelectTo Do This
Setup PasswordEnter, change, or delete a setup password.
(The setup password is called an administrator
password in Compaq Computer Security, a
program accessed from the Windows Control
Panel.)
Power-on PasswordEnter, change, or delete a power-on password.
DriveLock PasswordsEnable/disable DriveLock; change a DriveLock
User or Master password.
Drive Lock Settings are accessible only
✎
when you enter Computer Setup by
turning on (not restarting) the computer.
Password Options
Password options can be
selected only when a
power-on password has
been set.
Device SecurityEnable/disable:
System IDsEnter identification numbers for the computer,
*Not applicable to SuperDisk LS-120 drives.
2–4Maintenance and Service Guide
Enable/disable:
■QuickLock
■QuickLock on Standby
■QuickBlank
To enable QuickLock on Standby or
✎
QuickBlank, you must first enable
QuickLock.
■Ports or diskette drives*
■Diskette write*
■CD-ROM or diskette startup
Settings for a DVD-ROM can be
✎
entered in the CD-ROM field.
a docking base, and all battery packs in the
system.
Troubleshooting
Selecting from the Advanced Menu
Table 2-3
Advanced Menu
SelectTo Do This
Language (or press F2)Change the Computer Setup language.
Boot OptionsEnable/disable:
■QuickBoot, which starts the computer more
quickly by eliminating some startup tests.
(If you suspect a memory failure and want to
test memory automatically during startup,
disable QuickBoot.)
■MultiBoot, which sets a startup sequence
that can include most bootable devices and
media in the system.
Device Options
■Enable/disable the embedded numeric
keypad at startup.
■Enable/disable multiple standard pointing
devices at startup. (To set the computer to
support only a single, usually nonstandard,
pointing device at startup, select Disable.)
■Enable/disable USB legacy support for a
USB keyboard. (When USB legacy support
is enabled, the keyboard works even when a
Windows operating system is not loaded.)
■Set an optional external monitor or overhead
projector connected to a video card in a
docking base as the primary device. (When
the computer display is set as secondary,
the computer must be shut down before
undocking from a docking base.)
Maintenance and Service Guide2–5
Troubleshooting
Table 2-3
Advanced Menu
SelectTo Do This
(Continued)
Device Options
(continued)
■Change the parallel port mode from
Enhanced Parallel Port (EPP, the default
setting) to standard, bidirectional, EPP or
Enhanced Capabilities Port (ECP).
■Set video-out mode to NTSC (default), PAL,
NTSC-J, or PAL-M.*
■Enable/disable all settings in the SpeedStep
window. (When Disable is selected, the
computer runs in Battery Optimized mode.)
■Specify how the computer recognizes
multiple identical docking bases that are
identically equipped. (Select Disable to
recognize the docking bases as a single
docking base; select Enable to recognize
the docking bases individually, by serial
number.)
■Enable/disable the reporting of the
processor serial number by the processor
to the software.
HDD Self Test OptionsRun a quick comprehensive self test on hard
drives in the system that support the test
features.
* Video modes vary even within regions. However, NTSC is common in
North America; PAL, in Europe, Africa, and the Middle East; NTSC-J, in
Japan; and PAL-M, in Brazil. Other South and Central American regions
may use NTSC, PAL, or PAL-M.
2–6Maintenance and Service Guide
2.2Using Compaq Diagnostics
When you access Compaq Diagnostics, a scan of all system
components is displayed on the screen before the Compaq
Diagnostics window opens.
You can display more or less information from anywhere within
Compaq Diagnostics by selecting Level on the menu bar.
Compaq Diagnostics is designed to test Compaq components.
If non-Compaq components are tested, the results may be
inconclusive.
Obtaining, Saving, or Printing
Configuration Information
1. Access Compaq Diagnostics by selecting Start > Settings >
Control Panel > Compaq Diagnostics.
2. Select Categories, then select a category from the
drop-down list.
❏To save the information, select File > Save As.
Troubleshooting
❏To print the information, select File > Print.
3. To close Compaq Diagnostics, select File > Exit.
Maintenance and Service Guide2–7
Troubleshooting
Obtaining, Saving, or Printing Diagnostic
Test Information
1. Access Compaq Diagnostics by selecting Start > Settings >
Control Panel > Compaq Diagnostics.
2. Select the Test tab.
3. In the scroll box, select the category or device you want
to test.
4. Select a test type:
❏Quick Test—Runs a quick, general test on each device in
a selected category.
❏Complete Test—Performs maximum testing on each
device in a selected category.
❏Custom Test—Performs maximum testing on a selected
device.
◆To run all tests for your selected device, click
Check All.
◆To run only the tests you select, click Uncheck All,
then select the checkbox for each test you want
to run.
2–8Maintenance and Service Guide
Troubleshooting
5. Select a test mode:
❏Interactive Mode—Provides maximum control over the
testing process. You determine whether the test was
passed or failed, and you may be prompted to insert or
remove devices.
❏Unattended Mode—Does not display prompts. If errors
are found, they are displayed when testing is complete.
6. Click Begin Testing.
7. Select a tab to view a test report:
❏Status tab—Summarizes the tests run, passed, and failed
during the current testing session.
❏Log tab—Lists tests run on the system, the number of
times each test has run, the number of errors found on
each test, and the total run time of each test.
❏Error tab—Lists all errors found in the computer with
their error codes.
8. Select a tab to save the report:
❏Log tab—Select Save.
❏Error tab—Select Save.
9. Select a tab to print the report:
❏Log tab—Select File > Save As, then print the file from
your folder.
Maintenance and Service Guide2–9
Troubleshooting
2.3Troubleshooting Flowcharts
Tabl e 2 - 4
Troubleshooting Flowcharts Overview
FlowchartDescription
2.1Initial Troubleshooting
2.2No Power, Part 1
2.3No Power, Part 2
2.4No Power, Part 3
2.5No Power, Part 4
2.6No Video, Part 1
2.7No Video, Part 2
2.8Nonfunctioning Docking Station
2.9No Operating System (OS) Loading
2.10No OS Loading From Hard Drive, Part 1
2.11No OS Loading From Hard Drive, Part 2
2.12No OS Loading From Hard Drive, Part 3
2.13No OS Loading From Diskette Drive
2.14No OS Loading From CD- or DVD-ROM Drive
2.15No Audio, Part 1
2.16No Audio, Part 2
2.17Nonfunctioning Device
2.18Nonfunctioning Keyboard
2.19Nonfunctioning Pointing Device
2.20No Network or Modem Connection
2–10Maintenance and Service Guide
Flowchart 2.1 - Initial Troubleshooting
Begin
troubleshooting.
N
Troubleshooting
Is there
power?
Y
Beeps,
LEDs, or error
messages?
Y
Is there video?
(no boot)
Y
Is the OS
loading?
Y
Is there
sound?
Y
Flowchart 2.2,
No Power, Part 1.
N
LED board,
connections.
N
Flowchart 2.6,
No Video, Part 1.
N
Flowchart 2.9,
No OS Loading.
N
Flowchart 2.15,
No Audio.
Go to
Check
speaker
Go to
Go to
Go to
All drives
working?
Y
Keyboard/
pointing device
working?
Y
Connecting
to network
or modem?
Y
End
N
Flowchart 2.17,
Nonfunctioning
N
Flowchart 2.18,
Nonfunctioning
or Flowchart 2.19,
Nonfunctioning
Pointing Device.
N
Flowchart 2.20,
No Network or
Connection.
Go to
Device.
Go to
Keyboard,
Go to
Modem
Maintenance and Service Guide2–11
Troubleshooting
Flowchart 2.2 - No Power, Part 1
No power
(power LED
is off).
Remove from
docking station
(if applicable).
N
Power up
on battery
power?
*Reset
power.
Y
N
Power up
on AC
power?
*Reset
power.
Y
Y
Power up
in docking
station?
Done
N
1. Reseat the power cables in the docking
station and at the AC outlet.
2. Ensure that the AC power source is active.
3. Ensure that the power strip is working.
YN
Done
Power up
in docking
station?
N
Power up
on battery
power?
Go to
Flowchart 2.3,
No Power,
Part 2.
Y
N
Power up
on AC
power?
Go to
Flowchart 2.4,
No Power,
Part 3.
Y
*On some models there is a separate reset
button. On some models the computer may
be reset using the Standby switch and either
the lid switch or the main power switch.
Go to
Flowchart 2.8,
Nonfunctioning
Docking Station.
2–12Maintenance and Service Guide
Flowchart 2.3 - No Power, Part 2
Continued from
Flowchart 2.2,
No Power, Part 1.
Visually check for
debris in battery
socket and clean if
necessary.
Y
Troubleshooting
Power on?
N
Check battery
by recharging,
moving it to
another computer,
or replacing it.
Power on?
Y
Done
Done
N
Replace
power supply
(if applicable).
N
Go to
Power on?
Flowchart 2.4,
No Power,
Part 3.
Y
Done
Maintenance and Service Guide2–13
Troubleshooting
Flowchart 2.4 - No Power, Part 3
Continued from
Flowchart 2.3,
No Power, Part 2.
Plug directly
into AC outlet.
Y
Power LED
on?
N
Reseat AC adapter
in computer and
at power source.
Power on?
N
Power outlet
active?
Y
Replace
power cord.
Power on?
Done
Y
Done
N
Try different
outlet.
Internal or
external AC
Internal
Flowchart 2.5,
No Power,
Y
Done
adapter?
Go to
Part 4.
External
Replace external
AC adapter.
N
Power on?
Y
Done
N
2–14Maintenance and Service Guide
Flowchart 2.5 - No Power, Part 4
Continued from
Flowchart 2.4,
No Power, Part 3.
Open
computer.
Troubleshooting
Loose or
damaged
parts?
N
Close
computer and
retest.
Power on?
Y
Done
Y
Reseat loose
components and
boards and
replace
damaged items.
N
Replace the following items (if applicable).
Check computer operation after each
replacement:
1. Internal DC-DC converter*
2. Internal AC adapter
3. Processor board*
4. System board*
*Replace these items as a set to prevent
shorting out among components.
Maintenance and Service Guide2–15
Troubleshooting
Flowchart 2.6 - No Video, Part 1
No video.
Docking
station
Stand-alone
or docking
station?
Go to
Flowchart 2.7,
No Video, Part 2.
*To change from internal to
external display, use the hotkey
combination.
Stand-alone
Y
Internal or
external
display*?
External
Adjust
brightness.
Internal
Y
Video OK?Done
N
Check for bent
pins on cable.
N
Video OK?
Adjust
brightness.
Video OK?Done
N
A
Press lid
switch to ensure
operation.
Y
Video OK?
Done
N
Replace the following one at a time. Test after each replacement.
1. Cable between notebook and computer display (if applicable)
2. Inverter board (if applicable)
3. Display
4. System board
N
Try
another
display.
Internal and
external
video OK?
Replace
system
board.
YY
Done
2–16Maintenance and Service Guide
Done
Flowchart 2.7 - No Video, Part 2
Continued from
Flowchart 2.6,
No Video, Part 1.
Remove
notebook from
docking station,
if connected.
Troubleshooting
Adjust
display
brightness.
N
Video OK?
No Video, Part 1.
Y
Check that notebook is properly
seated in docking station,
for bent pins on cable, and for
monitor connection.
Y
Video OK?
N
Adjust external
monitor display.
Go to “A” in
Flowchart 2.6,
Done
Check brightness
of external
monitor.
Video OK?
N
Try another
external
monitor.
Internal
and external
video OK?
N
Go to
Flowchart 2.8,
Nonfunctioning
Docking Station.
Y
Done
Y
Done
Maintenance and Service Guide2–17
Troubleshooting
Flowchart 2.8 - Nonfunctioning Docking Station
(if applicable)
Nonfunctioning
docking station.
Reseat power
cord in docking
station and
power outlet.
Check voltage
setting on
docking station.
Reset monitor
cable connector at
docking station.
Docking
station
operating?
N
Remove
notebook, reseat
all internal parts,
and replace any
damaged items in
docking station.
Reinstall
notebook into
docking station.
Y
Docking
station
operating?
Y
Done
N
Replace the following docking station
components one at a time. Check
computer operation after each
replacement.
1. Power supply
2. I/O board
3. Backplane board
4. Switch box
5. Docking motor mechanism
Done
2–18Maintenance and Service Guide
Troubleshooting
Flowchart 2.9 - No Operating System (OS) Loading
No OS
loading.*
Reseat power
cord in docking
station and
power outlet.
*Before beginning troubleshooting, always
check cable connections, cable ends, and
drives for bent or damaged pins.
No OS loading
from hard drive,
go to Flowchart 2.10,
No OS Loading from
Hard Drive, Part 1.
No OS loading
from diskette drive,
go to Flowchart 2.13,
No OS Loading from
Diskette Drive.
No OS loading
from CD- or
DVD-ROM drive,
go to Flowchart 2.14,
No OS Loading
from CD- or
DVD-ROM Drive.
Maintenance and Service Guide2–19
Troubleshooting
Flowchart 2.10 - No OS Loading from Hard Drive, Part 1
OS not
loading from
hard drive.
Nonsystem
disk message?
N
Reseat
external
hard drive.
OS loading?
N
Boot
from
CD?
Y
Check the setup
utility for correct
booting order.
Y
Go to
Flowchart 2.11,
No OS Loading
from Hard Drive,
Part 2.
Y
Done
N
N
Boot
from
diskette?
Y
Go to
Flowchart 2.13,
No OS
Loading from
Diskette Drive.
N
Boot
from
hard drive?
Y
Done
Change boot
priority through
the setup utility
and reboot.
Boot
from
hard drive?
N
Go to
Flowchart 2.17,
Nonfunctioning
Device.
Y
2–20Maintenance and Service Guide
Troubleshooting
Flowchart 2.11 - No OS Loading from Hard Drive, Part 2
Continued from
Flowchart 2.10,
No OS Loading
from Hard Drive,
Part 1.
Reseat
hard drive.
CD or
diskette in
drive?
Y
Remove
diskette and
reboot.
Boot
from
hard drive?
N
Boot
from diskette
drive?
Y
Hard drive
accessible?
Y
Go to
Flowchart 2.12,
No OS Loading
from Hard Drive,
Part 3.
N
1. Replace hard
drive.
2. Replace system
board.
Y
N
Flowchart 2.13,
No OS Loading
from Diskette
N
Done
Go to
Drive.
Done
Hard drive
accessible?
N
Run FDISK.
Hard drive
partitioned?
Y
Hard drive
formatted?
Y
Y
Computer
booted?
Go to
Flowchart 2.12,
No OS Loading
from Hard Drive,
Part 3.
Y
Done
N
Create partition,
then format hard
drive to bootable
C:\ prompt.
N
Format hard drive
and bring to
a bootable
C:\ prompt.
Load OS using
Restore CD
(if applicable).
N
Maintenance and Service Guide2–21
Troubleshooting
Flowchart 2.12 - No OS Loading from Hard Drive, Part 3
Continued from
Flowchart 2.11,
No OS Loading
from Hard Drive,
Part 2.
N
System
files on hard
drive?
Y
Virus
on hard
drive?
N
Run SCANDISK
and check for
bad sectors.
Can bad
sectors
be fixed?
Y
Fix bad
sectors.
Install OS
and reboot.
Y
Clean virus.
OS
loading from
hard drive?
Y
Done
N
Y
Diagnostics
on diskette?
Replace
hard drive.
N
N
Replace
hard drive.
Run diagnostics
and follow
recommendations.
N
Boot from
hard drive?
Replace
hard drive.
Y
Done
2–22Maintenance and Service Guide
Troubleshooting
Y
Flowchart 2.13 - No OS Loading from Diskette Drive
OS not loading
from
diskette drive.
Nonsystem
disk message?
Boot
from another
device?
Y
Diskette
drive enabled
in the setup
utility?
Y
Y
N
N
Reseat
diskette drive.
Go to
Flowchart 2.17,
Nonfunctioning
Device.
Enable drive
and cold boot
computer.
OS
loading?
N
Bootable
diskette
in drive?
YN
Check diskette
for system files.
Try different
diskette.
Nonsystem
disk error?
N
Done
N
Install bootable
diskette and
reboot computer.
Y
1. Replace
diskette drive.
2. Replace system
board.
Y
Diskette
drive boot
order?
Change boot
priority using
the setup utility.
Maintenance and Service Guide2–23
Clear CMOS.
Refer to
Section 1.3,
“Clearing a
Password,” for
instructions.
Go to
Flowchart 2.17,
Nonfunctioning
Device.
OS
loading?
NN
Y
Done
Troubleshooting
Y
N
Flowchart 2.14 - No OS Loading from CD- or
DVD-ROM Drive
No OS
loading from
CD- or
DVD-ROM Drive.
Boots from
CD or DVD?
N
Reseat
drive.
N
Y
N
Y
Disc
in drive?
Install
bootable disc.
Done
Boots from
CD or DVD?
Booting
from another
device?
Y
Y
N
Bootable
disc in
drive?
Try another
bootable disc.
Done
Go to
Flowchart 2.17,
Nonfunctioning
Device.
Install bootable
disc and
reboot
computer.
Clear CMOS.
Y
Booting
order
correct?
N
Correct boot
order using
the setup utility.
2–24Maintenance and Service Guide
Refer to
Section 1.3,
“Clearing a
Password,” for
instructions.
Go to
Flowchart 2.17,
Nonfunctioning
Device.
Flowchart 2.15 - No Audio, Part 1
Y
Troubleshooting
No audio.
Notebook in
docking station
(if applicable)?
N
Go to
Flowchart 2.16,
No Audio, Part 2.
Y
Turn up audio
internally or
externally.
Undock
Replace the following docking station
components one at a time as applicable.
Check after each change.
1. Reseat docking station audio cable.
2. Replace audio cable.
3. Replace speaker.
4. Replace docking station audio board.
5. Replace backplane board.
6. Replace I/O board.
Go to
Flowchart 2.17,
Nonfunctioning
Device.
Audio?
Done
N
N
Internal
audio?
Go to
Flowchart 2.16,
No Audio, Part 2.
Y
Y
Audio?
Done
N
Maintenance and Service Guide2–25
Troubleshooting
Flowchart 2.16 - No Audio, Part 2
Continued from
Flowchart 2.15,
No Audio, Part 1.
N
Audio
driver in OS
configured?
Reload
audio drivers.
Y
N
Correct
drivers for
application?
Load drivers and
set configuration
in OS.
Y
Connect to
external
speaker.
Replace audio
board and
Audio?
YN
speaker
connections in
notebook
(if applicable).
1. Replace internal speakers.
2. Replace audioboard(if applicable).
3. Replace system board.
Audio?Done
YN
2–26Maintenance and Service Guide
Flowchart 2.17 - Nonfunctioning Device
Nonfunctioning
device.
Reseat
device.
Unplug the nonfunctioning device
from the notebook and inspect cables
and plugs for bent or broken pins or
Clear
CMOS.
other damage.
Y
Any physical
device detected?
N
Troubleshooting
Fix or
replace
broken item.
Reattach device.
Close notebook,
plug in power,
and reboot.
N
Device
boots
properly?
Y
Done
Maintenance and Service Guide2–27
Possible bad
hard drive.
Replace drive.
Possible bad NIC.
Replace card. If
integrated NIC,
replace system
board.
Possible bad
diskette drive.
Replace drive.
Go to
Flowchart 2.9,
No OS Loading.
Device
boots
properly?
Y
Done
N
Troubleshooting
Flowchart 2.18 - Nonfunctioning Keyboard
Keyboard
not operating
properly.
Connect notebook
to good external
keyboard.
N
External
device
works?
Y
Reseat internal
keyboard
connector
(if applicable).
Replace
system
board.
N
OK?
Replace internal
keyboard or
cable.
Y
Y
Done
OK?
Done
N
Replace
system
board.
2–28Maintenance and Service Guide
Troubleshooting
Flowchart 2.19 - Nonfunctioning Pointing Device
Pointing device
not operating
properly.
Connect notebook
to good external
pointing device.
N
External
device
works?
Y
Reseat internal
pointing device
connector
(if applicable).
OK?
Y
Done
Replace
system
board.
N
Replace internal
pointing device
or cable.
Y
OK?
Done
N
Replace
system
board.
Maintenance and Service Guide2–29
Troubleshooting
Flowchart 2.20 - No Network or Modem Connection
No network
or modem
connection.
N
Network
or modem jack
active?
Y
Digital
line?
N
NIC/modem
configured
in OS?
Y
Disconnect all
power from
the notebook
and open.
Reseat
NIC/modem
(if applicable).
Replace jack or
Y
to nondigital
N
drivers and
reconfigure.
have jack
activated.
Connect
line.
Reload
N
NIC/modem
(if applicable).
N
OK?
Replace
OK?
Y
Done
Y
Done
Replace
system
board.
2–30Maintenance and Service Guide
Illustrated Parts Catalog
This chapter provides an illustrated parts breakdown and a
reference for spare part numbers and option part numbers.
3.1Serial Number Location
When ordering parts or requesting information, provide the
notebook serial number and model number located on the bottom
of the notebook (Figure 3-1).
3
Figure 3-1. Serial Number Location
Maintenance and Service Guide3–1
Illustrated Parts Catalog
3.2Notebook System Major Components
Figure 3-2. Notebook System Major Components
3–2Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook System Major Components
Spare Part
ItemDescription
1Displays
For use with Evo Notebook N620c models only
14.1-inch, SXGA+, CTFT319733-001
For use with Evo Notebook N610c and N610v
models only:
14.1-inch, SXGA+, CTFT
14.1-inch, XGA, CTFT
For use with Evo Notebook N600c models only:
14.1-inch, SXGA+, CTFT
14.1-inch, XGA, CTFT
2Switch cover241438-001
3Keyboard with pointing stick (for use with
Dual Stick models)
Bosnia-
Herzegovina/
Croatia/
Slovenia/
Yugoslavia
Brazil
Czech
Republic
Denmark
Europe
France
French
Canada
Germany
Greece
Hungary
International
241427-B41
241427-201
241427-221
241427-081
241427-021
241427-051
241427-121
241427-041
241427-151
241427-211
241427-002
Israel
Italy
Japan
Korea
Latin America
Norway
Portugal
Russia
Saudi Arabia
Slovakia
Spain
Sweden/Finland
Switzerland
Ta i wa n
Tu r ke y
United Kingdom
United States
Israel
Italy
Japan
Korea
Latin America
Norway
Portugal
Russia
Saudi Arabia
Slovakia
Spain
Sweden/Finland
Switzerland
Ta i wa n
Tu r ke y
United Kingdom
United States
Memory expansion compartment cover (on Evo Notebook N620c,
N610c, and N610v models)
Mini PCI compartment cover (on Evo Notebook N600c models)
Processor bracket
Modem cable
Hard drive bezel
Disk cell RTC battery
Mini PCI compartment cover (on Evo Notebook N620c, N610c, and
N610v models)
Memory expansion compartment cover (on Evo Notebook
N600c models)
Not illustrated:
MultiPort module cover
Notebook feet
PC Card slot space savers
RJ-11 cover
For use with Evo Notebook N620c models only:
TouchButton with pointing stick buttons
(for use with Dual Stick models)
For use with Evo Notebook N610c and N610v
models only:
TouchPad (for use with TouchPad models)
TouchButton with pointing stick buttons
(for use with Dual Stick models)
319772-001
253658-001
252434-001
For use with Evo Notebook N600c models only:
TouchPad (for use with TouchPad models)
TouchButton with pointing stick buttons
(for use with Dual Stick models)
135227-001
159530-001
Maintenance and Service Guide3–7
Illustrated Parts Catalog
Notebook System Major Components (continued)
3–8Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook System Major Components
ItemDescription
6Memory expansion boards
266 MHz, 2DM (for Evo Notebook N620c models only)
(Continued)
Spare Part
Number
1024 MB
768 MB
512 MB
384 MB
256 MB
133 MHz (for Evo Notebook N610c and N610v models only)
512 MB
256 MB
128 MB
64 MB
100 MHz (for Evo Notebook N600c models only)
512 MB
256 MB
128 MB
7Top covers
For use with Evo Notebook N620c, N610c, and
N610v models only
For use with Evo Notebook N600c models only
8Fans
For use with Evo Notebook N620c, N610c, and
N610v models only
For use with Evo Notebook N600c models only
316391-001
and
301576-001
301575-001
301574-001
301572-001
301571-001
238879-001
212683-001
212682-001
212681-001
280875-001
280874-001
280873-001
291264-001
241436-001
291266-001
255528-001
Maintenance and Service Guide3–9
Illustrated Parts Catalog
Notebook System Major Components (continued)
3–10Maintenance and Service Guide
Illustrated Parts Catalog
Table 3-1
Spare Parts: Notebook System Major Components
ItemDescription
9System boards
(Continued)
Spare Part
Number
For use with Evo Notebook N620c models only
For use with Evo Notebook N610c and N610v
models only
For use with Evo Notebook N600c models only:
Mobile Intel Pentium III processor 1.066 GHz-M
Mobile Intel Pentium III processor 866 MHz-M
10Heat sink303103-001
11DC-DC converter boards
For use with Evo Notebook N620c models only
For use with Evo Notebook N610c and N610v