How it Works
HP
Loading...
C
Loading...
Loading...
Compaq dx2710
User Manual
2 pgs471.43 Kb0
White Paper
8 pgs218.42 Kb0
User Manual
24 pgs192.98 Kb1

HP COMPAQ DX2710 User Manual

HP Compaq Business Desktop dx2710/dx2718
Microtower Models
Illustrated Parts Map
Intel® Core™ 2 processors, Intel Pentium® processors, or Intel Celeron® processors
System Unit
Front bezel (cardbonite) with diskette drive bezel and 2 - 5.25" bezel. (See Miscellaneous parts for
1
kit contents) for dx2710 MT model Front bezel (carbonite and silver) with diskette drive bezel and 2- 5.25” bezel blanks for dx2718
2
MT models Power supply, 250W PFC, MT 480723-001
3
Power supply, 300W PFC, MT 480724-001
*
Access panel used on Alamo, MT 480725-001
4
Chassis not spared
5
* Not shown
Mass Storage Device
1 Diskette drive, 3.5-inch 435420-001
2 80GB, SATA 3.0Gb 449978-001
* 160GB, SATA 3G 449979-001
* 250GB, SATA 3G 449980-001
* 500GB, SATA 3G 457909-001
3 DRV,DVDROM,SATA,16X 419496-001
* DRV,COMBO,SATA, ODD,48/32 419497-001
* DRV, ODD,SATA,16X,LS,SM,DVDRW bPC 447310-001
* Not shown
480726-001
480727-001
dx2710/dx2718 © 2008 Hewlett-Packard Development
HP and the HP logo are trademarks of Hewlett-Packard
Intel and Celeron are US registered trademarks of Intel Corporation. All other product names mentioned herein
may be trademarks of their respective companies.
shall not be liable for technical or editorial errors or
HP
omissions contained herein. The information in this document is provided “as is” without warranty of any kind and is subject to change without notice. The warranties for
HP products are set forth in the express limited warranty
statements accompanying such products. Nothing herein
should be construed as constituting an additional
Company, L.P.
Development Company, L.P.
warranty
February 2008
Document Part Number 483940-001
Blanks Cables
Cable kit
1 Diskette drive cable 2 SATAII 3G, 180mm,RoHS ,ST-ST,black * SATAII 3G, 180mm,RoHS ,ST-ST,blue * RJ11 cable * PORT 2ND SERIAL
Keyboards (not illustrated)
KYBD,PS/2, BASIC, VISTA 435302-xxx
* International -B31 * Peoples Republic of China -AA1 * Taiwanese -AB1 * Thai -281 * KOR -KD1
KYBD USB, Basic, Vista 435382-xxx
* International -B31 * Peoples Republic of China -AA1 * Taiwanese -AB1 * Thai -281 * KOR -KD1
* Not shown
480731-001
198220-005
392414-001
Standard and Optional Boards
Memory modules 1 MEM DIMM 1GB PC2-6400,CL6 418951-001
* MEM DIMM 512MB PC2-6400 CL6 418952-001 * DIMM, MEMORY, 2GB, PC2-6400, CL6 457624-001
Intel Processors with alchohol pad and thermal grease * SPS-PROC,CEL-L 420, 1.6GHZ, 512K, A-1 449164-001
System board with alcohol and thermal grease 4 BD, SYS dx271x 480734-001 Other boards
* Broadcom Gb NIC PCIe, FH 430654-001 * Intel Gb NIC PCIe, FH 398754-001 * MDM, PCI modem, V92, FH 398661-001
* BD,1394 3-PORT PCI CARD 441448-001 * PCA,GRAF,PCIx16,DMS59,256MB,ATIX2400 462477-001 * CARD,GRAFX,X16,DL-DVII/TV,256,G86 445743-001
* Not shown # Spared with alcohol wipe and thermal grease
Miscellaneous Parts
Miscellaneous hardware kit. Includes: 480730-001 1 5.25” drive bezel blank without metal shield (1 ea) 2 Diskette drive bezel without metal shield, silv er (1 ea)
* IO SHIELD ASSY, KUNLUNSHAN (1 ea)
* Rubber foot (2 ea) 3 Heatsink with alcohol pad and thermal grease 480732-001 4 Cover slot lock (1 ea) 5 Cover slot (2 ea)
6 3.5” diskette drive bezel without metal shield (carbon ite) (1 ea) * System Fan 440992-001
* Media Card Reader 407187-001 * USB optical mouse carbonite 390938-001 * PS/2 scroll mouse 390937-001 * PS/2 optical Mouse 417966-001 * Internal speaker 480733-001 * PWR-LED SWITCH, MT 481012-001
Miscellaneous screw kit, includes 480729-001 *
#6-32 x 0.25 lg pan head (10 ea , for power supply, cover slo t lock and motherboard.)
*
#6-32 x 0.187 lg hi top (6 ea)
*
SCR GG M3,TT,HI/TOP,S15IPX5MM SPARE,RoHS (4 ea)
* SCR_6-32_T15 Lock (1 EA)
_
CPU XU1 DIMM3 DIMM4
CPU
P5
SYS_FAN
PCIE X 16
PCIE X 1
PCI 1
PCI 2
XBT1
P4
P26
System Board Connectors and Jumpers (position of some untitled components may vary in location)
Component Label Component
Label
XU1 Processor socket E17 Clear CMOS jumper
CPU_FAN CPU fan J17 Front panel header DIMM1 Memory socket 1 XBT1 Real-time-clock battery DIMM2 Memory socket 2 P26 Front audio header
DIMM3 Memory socket 3 P4 CD in audio DIMM4 Memory socket 4 PCI 1 PCI 1 connector FLOPPY Diskette drive connector PCI 2 PCI 2 connector PWR P1 ATX main power PCIE X 16 PCI-E X 16 connector
SATA0 SATA connector 0 PCIE X 1 PCI-E x1 connector SATA1 SATA connector 1 SYS_FAN System fan SATA2 SATA connector 2 P5 CPU 4 pin power connector
SATA3 SATA connector 3 P24 FRONT USB 1
P25 FRONT USB 2
Clear_CMOS* CMOS
Clear CMOS 2-3 Normal (Default) 1-2
*: clear CMOS function only can be available when system is power off (power cord is disconnected)
System Hardware Interrupts
IRQ System Function IRQ System Function
0 1 Keyboard 10 UHCI(D29:F2) 3 Serial port 1 4 Serial Port 2 11 UHCI(D29:F0)
5 VGA controller 11 UHCI(D29:F1) 5 UHCI(D26:F0) 11 EHCI(D29:F7) 5 UHCI(D26:F1) 11 EHCI(D26:F7) 6 FDC controller 11 SATA contro ller(D31:F5) 7 Parallel Port (LPT 1) 11 SATA controller(D31:F2) 9 HDA controller 12 Mouse 10 LAN controller
Establishing a Password
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down >Restart the computer.
2. When the F10 Setup message appears in the lower-right corner of the screen, pre ss the F10 key . Press Enter to by pass the tit le
screen, if necessary. If you do not press F10 when prompted, a rest art will be necessary.
3. Select supervisor password and press enter key, and follow the instructions on the screen. You may also want to establish the
Password check at this time. This will allow you to specify when the password will be required.
4. Before exiting, click Save Settings and Exit.
Changing a Password
1. Turn on or restart the computer. If you are in Windows, click Start > Shut D own > Restart the Computer. To change the setup
password, run Computer Setup.
2. When the key icon appears, type your current password, a slash (/) or alternate de-limiter character, your new password, another
slash (/) or alternate delimiter character, and your new password again as shown: current password/new password/new password. NOTE: Type the new password carefully since the actual characters do not appear on the screen..
3. Press the enter key.
4. The new password will take effect the next time the computer is restarted.
Host controller
J13
DIMM 2
DIMM1
FAN
PWR P1
FLOPPY
SATA0
FRONT PANEL
HEADER
P25
SATA1 P7
SATA3 SATA2
P24
E16
J13 2ND SERIAL PORT HEADER P7 Internal speaker header
E16 BOOT BLOCK HEADER
10
10 Lan controller
UHCI(D26:F2)
E17
Deleting a Password
1. Turn on or restart the computer. If you are in Windows, click Start > Shut D own > Restart the Computer. To delete
the setup password, run Computer Setup (F10).
2. When the key icon appears, type your current password followed by a slash (/) or alternate delimiter character as shown. Example: currentpassword/
3. Press the Enter key.
Clearing CMOS*
The computer's configuration (CMOS) may occasionally be corrupted. If it is, it is necessary to clear the CMOS memory using by perform ing the following procedure::
CAUTION: The power cord must be disconnected from the power source before changing the jumper setting.
△
(NOTE: All LEDs on the board should be OFF). Failure to do so may damage the system board
1. Turn off the computer and any exte rnal devices, then disconnect the power cord from the power out let.
2. Remove the access panel.
3. Clear CMOS with header E17.
4. Replace the access panel.
5. Connect the power cord to the power outlet.
6. Turn on the computer, allow it to start.
NOTE: Clearing CMOS clears all passwords.
Diagnostic LEDs and Beeps
LED
Color LED/Beep Activity State/Message
Power Green On (S0) Computer on Power Green 1 blink every 2 seconds (S1) Normal Suspend Mode
Power Green 1 blink every 2 seconds (S3) Suspend to RAM
Power Clear Off (S4) Suspend to Disk (if applicable)
Power Clear Off (S5) Computer off Power Green Green when flashing ROM Boot block recovery w/Embedded Video Power
Power Red
Power Red
Power Red
Hard Drive Green Blinking Hard drive activity
Computer Setup (F10) Utility Features (not all features may be available)
System Information
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated
Peripherals
Power Management Setup
PnP/PCI Configurations
Hardware Monitor Setup
Load Defaults Setting Set Supervisor Password
Set User
Password
Save Setting
and Exit
Exit Without
Saving
Note: See Computer Setup (F10) Utility Guide on the Library CD.
Red
CPU Fan weak (RPM < 1000) or not turning, Display Warning message and Long Beep for 5 sec and shut down.
Power LED flashes 5 seconds every 1 second, followed by 2 seconds pause, and meanwhile, 5 beeps are heard
Power LED flashes 6 seconds every 1 second, followed by 2 seconds pause, and meanwhile, 6 beeps are heard
Power LED flashes 8 seconds every 1 second, followed by 2 seconds pause, and meanwhile, 8 beeps are heard
System S/N Product Name OwnerShip TAG BIOS Version BIOS Release Date System Chipset Type Processor Type Processor Speed CPU ID Cache Size
System Date System Time Floppy Drive A SATA Port 0 SATA Port 1
F11 Prompt Quick Power On Self Test POST Delay Time (seconds) Removable device Priority Hard Disk Boot Priority CD-ROOM Boot Priority Network Boot Priority First Boot Device Second Boot Device
On-Chip Frame Buffer Size Disable MCHBAR MMIO PEG/Onchip VGA control DVMT Mode
USB Controller USB Legacy support HD Audio Onboard Lan Controller Onboard Lan Boot ROM Onboard FDC Controller
PCI-E Wake on PME ACPI Function ACPI Suspend Type Resume On PME Resume On Ring Resume by Alarm Date(of Month) Alarm
Reset Configuration Data Resources Controlled By IRQ Resources
FAN Controller CPU Fan Speed System Fan Speed
CPU thermal shutdown (Weak CPU fan speed or not running)
No memory installed / Pre-Video memory error
Graphics card error (Pre-Video graphics error)
System board failure or invalid ROM basing on checksum.
Memory DIMM1 Memory DIMM2 Memory DIMM3 Memory DIMM4 DDR2 Memory Size UUID Chassis Serial Number Asset TAG Number Integrated MAC
SATA Port 2 SATA Port 3 Legacy Mode Support
Halt On
Third Boot Device Fourth Boot Device Boot Other Device Load Boot Menu Selectable APIC Mode Hyper-Threading Technology System Keyboard Boot Up NumLock Status Security Option
DVMT/Fixed Memory Size Init Display First CPU Clock Ratio Auto Detect PCI CLK Spread Spectrum
Serial Port 1 Serial Port 2 Parallel Port Parallel Port Mode ECP Mode Use DMA
Resume Time(hh:mm:ss) Alarm HPET Support HPET Mode WDRT Support WDRT Run/Stop WDRT Count Restore on AC/Power Loss
CPU Fan Fault Detect SYS Fan Fault Detect
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use