Page 1
HP's Server Console Switch with Virtual Media is a key component in managing the data center. Connections for two local consoles (a
console represents one keyboard, monitor and mouse) allow access to multiple servers running various operating systems. Virtual
Media capability allows a USB drive attached directly to the server console switch to be mapped to an attached server for installations
and upgrades. The local console user interface provides menus for configuration, virtual media, display, and even security and
upgrades.
In cascaded environments the Server Console Switch with Virtual Media can allow an administrator to manage up to 1024 servers
across two tiers from a single console. When tiered with additional HP Console Switches with Virtual Media application installations and
upgrades can be pushed through to any server on any of the two tiers from a single console.
The HP Server Console Switch with Virtual Media is backwards compatible with all HP Cat5 based Server Console Switches and interface
adapters.
Standard rack mounting of the HP Server Console Switches will take up 1U (1.75") of front panel rack space. However, the Switches can
also be mounted behind the HP 1U Rackmount Keyboard or the 1U TFT7600 Rackmount Keyboard Monitor or in a "zero U" profile by
mounting in the side rails of the rack.
0x2x16 or 0x2x32 HP Server Console Switch G2 with Virtual Media & CAC
1.
Power supply status indicator LEDs
7.
Console B VGA connector
2.
LAN connector
8.
Console B USB ports
3.
Tiering chain port
9.
Target device ports (1-16)
4.
RJ-45 serial setup port
10.
Target device ports (17-32)
5.
Console A VGA connector
11.
Power connectors A & B
6.
Console A USB ports
QuickSpecs
HP KVM Server Console Switch G2 with Virtual Media &
CAC
Overview
DA - 13475 Worldwide — Version 7 — November 20, 2013
Page 1
Page 2
Models
HP Server Console G2
Switch
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
AF618A
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
AF619A
At A Glance
Increased target server counts:
More target server per switch increases flexibility
Improved video support:
Increases cable distances at higher resolutions
Improved security:
CAC support to the server
Dual-stack IPv6 with stateless auto configuration
LDAP included:
Microsoft Active Directory integration using LDAP is standard
Local security database on switch is also available for non LDAP implementations
Local virtual media:
Administrators can map local media to a target server in the data center to easily perform application installations or
upgrades
A USB CD-ROM, USB DVD, USB floppy drive, or USB key can be attached directly to the HP Server Console Switch G2 with
Virtual Media & CAC and mapped to an attached server
When used locally with the HP 1U Rackmount Keyboard with USB or the HP TFT7600 RKM USB drives can be connected to
the front USB port on the keyboard for increased ease of use
Virtual media support requires the use of Virtual Media Interface Adapters
Virtual media interface adapter with CAC:
New interface adapters support virtual media and provide CAC on ProLiant servers
Virtual Media Interface Adapters with CAC support are USB 1.1 full speed.
Tiering support:
Two levels of cascading are available to support up to 1024 servers. When all tiers are comprised of virtual media
compatible console switches and interface adapters, virtual media can be mapped to a server on any tier
IP Viewer 4.1 software:
Supports HP Server Console Switches with Virtual Media for remote switch management which can be used in the lightsout datacenter
HP Serial Console Servers, and legacy Cat5 based HP IP Console Switches
Compatible with Windows and Linux clients
No software to install on target servers
QuickSpecs
HP KVM Server Console Switch G2 with Virtual Media &
CAC
Overview
DA - 13475 Worldwide — Version 7 — November 20, 2013
Page 2
Page 3
Target Applications and Markets
Network Administrators, System Administrators, Engineering Managers, Chief Information Officers, and Managers of Information
Systems are all among the users who will see benefits from using the HP family of server console switches.
Easy access to multiple servers (any server with PS2 or USB I/O connection port)
Multi-platform management from one console (Microsoft® Windows®, Novell, UNIX®, Linux etc)
Non-intrusive control and management of servers HP Server Console Switches are "out-of-band," allowing server activity to be
viewed on multiple systems without interfering in any way
Features
New Features
:
Common Access Card (CAC) support
True Serial
DVD Support
Video resolution supporting up to 1600 x 1200 on the local port
Widescreen video support modes include; 1680 x 1050, 1440 x 900, 1280 x 800, 1024 x 640, 800 x 500
Two local ports; these local ports are defined differently between the digital and analog appliances.
For the digital appliances, the local ports will be represented by one ACI connection and one local KVM connection. The
two ports will be independent of one another (i.e. not pre-emptive or shared).
For the analog appliance, the local ports are represented by an ACI connection and two sets of local KVM connections. One
of the KVM connections is tied to the ACI connection, so that KVM connection cannot be used if the ACI is connected. The
second KVM connection is independent of the ACI and first KVM connections/paths.
Supports Virtual Media (VM), Tiering (or cascading) up to 2 levels (base plus one lower level) through the ACI port.
Supports existing ITFC server modules, backward compatible.
Dual-stack IPv6 with stateless auto configuration
Support for DVD-ROM data over virtual media
Syslog support
BladeSystem c-Class KVM Interface Adapter for supporting BladeSystem c-Class servers
Standard Features
:
Local console user interface
- its same as remote On Board Web Interface (OBWI) which displays system-related information on
the console monitor, such as selected server name, status, power-up test data, configuration menus and virtual media.
Programmable Scanning
- An evaluation of system performance can be made by sequentially scanning any or all of the
computers in the system. Programmable scanning allows you to determine which computers to include as well as the duration
of the connection.
Configuration NVRAM
- NVRAM (non-volatile RAM) makes it easy to set configuration information using commands entered
from the keyboard. The NVRAM stores the resulting configuration until a user decision is made to change the information, even if
the unit loses power.
Password Protection
- For protection against unauthorized users, the switch box provides a password option for security
purposes.
Switch Firmware Update
- The application code of the switch can be quickly and easily updated via FLASH ROM. Updates can be
accomplished over the LAN eliminating the need to carry a notebook into the data center to perform firmware upgrades.
Multiple Space Saving 0U Installation Methods
Side Mount
- Rails are provided for mounting the unit to the side of rack cabinets with side mounting capability.
Rear Rack Mount
- HP Console Switches may be mounted behind a HP 1U Rackmount Keyboard, or the TFT7600 rack
mounted keyboard and monitor with slide rails provided with the switch.
QuickSpecs
HP KVM Server Console Switch G2 with Virtual Media &
CAC
Standard Features
DA - 13475 Worldwide — Version 7 — November 20, 2013
Page 3
Page 4
PS2 Virtual Media Interface Adapter support servers with PS2 mouse and keyboard connection and a USB port for virtual
media (recommended for ProLiant servers).
USB Virtual Media Interface Adapter supports servers without PS2 mouse and keyboard connections such as Integrity
servers running Microsoft Windows.
USB 2.0 protocol and speed supported on both Virtual Media Interface Adapters.
Virtual Media Interface Adapters provide Common Access Card (CAC). Virtual Media speed with the CAC Interface Adapters
is USB 1.1 Full Speed.
Support for a variety of server connections with Interface Adapters where virtual media is not needed.
PS/2
USB mouse and keyboard
VT100 serial console support
BladeSystems p-Class support via front diagnostics connector
The following input devices provide a convenient front USB pass through port for connecting USB media to the Server
Console Switch with Virtual Media
HP 1U Rackmount Keyboard with USB
HP TFT7600 Rackmount Keyboard Monitor
NOTE:
For more information please visit:
http://www.hp.com/go/kvm
.
Cascaded Configurations
Cascading, also called tiering, is the ability to connect one or more switches under a single switch at the top as in a pyramid. Cascading
allows an administrator to access larger numbers of servers from a single local or remote console. The HP IP Console Switch G2 with
Virtual Media & CAC will support up to 2 levels of tiering under certain conditions
HP IP Console Switches can be supported at the top or at the second tier of a cascaded configuration.
HP IP Console Switches with Virtual Media may be cascaded to HP Server Console Switches with Virtual Media or any Cat5 based
HP Server Console Switches by connecting a Cat5 cable from a server port on the top switch to the dedicated tiering port on the
switch below. Interface adapters are not needed to cascade HP Server Console Switches.
Virtual media can be mapped to servers on any tier but only if the server is connected to a HP Server Console Switch with Virtual
Media using a Virtual Media Interface Adapter. Virtual media operation requires a Virtual Media Interface Adapter connected to a
HP Console Switch with Virtual Media.
To perform a firmware upgrade for a cascaded HP Server Console Switch and all attached Interface Adapters; you must connect
to the cascaded HP KVM Server Console Switch OBWI.
NOTE:
For more information on cascading HP Server Console Switches please visit:
http://www.hp.com/go/kvm
.
PS2/USB Virtual Media, CAC Interface Adapter (PN: AF624A)
QuickSpecs
HP KVM Server Console Switch G2 with Virtual Media &
CAC
Standard Features
DA - 13475 Worldwide — Version 7 — November 20, 2013
Page 4
Page 5
1.
Video connector
4.
USB connector (for Virtual Media only)
2.
Mouse connector
5.
RJ-45 connector
3.
Keyboard connector
USB Virtual Media, CAC Interface Adapter (PN: AF623A)
1.
Video connector
3.
RJ-45 connector
2.
USB connector
HP KVM CNSL SRL/PWR G2 ITFC ADPTR (PN: AF625A)
USB Coax Power Connector Cable which replaces AC Power Adapter
QuickSpecs
HP KVM Server Console Switch G2 with Virtual Media &
CAC
Standard Features
DA - 13475 Worldwide — Version 7 — November 20, 2013
Page 5
Page 6
1.
RJ-45 serial connector (to RJ-45/DB9 adapter or to a Cisco
appliance)
3.
RJ-45 connector (for CAT5 to switch)
2.
Power connector (mate to USB power connector or power
supply)
QuickSpecs
HP KVM Server Console Switch G2 with Virtual Media &
CAC
Standard Features
DA - 13475 Worldwide — Version 7 — November 20, 2013
Page 6
Page 7
KVM Support
HP ProLiant Server Support
All HP ProLiant servers running any operating system are supported on all HP Server Console Switches.
HP Integrity Server Support
Integrity Server support is dependent on operating system and hardware configurations. For systems capable of displaying VGA
graphics the USB Interface Adapter (PN 336047-B21) may be used. Some Integrity Servers may require an optional graphics adapter.
With some operating systems the Serial Interface G2 Adapter (PN: AF625A) may be connected to the RS-232 management port to
provide serial connection through the HP Server Console Switch and the HP IP Console Switch.
HP Unix Server Support
HP9000 Servers can be managed using the Serial Interface G2 Adapter (PN: AF625A) connected to the RS-232 management port
providing serial connection through the HP Server Console Switch and the HP IP Console Switch.
NOTE:
For additional information on supported options for the HP Integrity and HP9000 Servers please consult the HP9000, Integrity
and carrier-grade servers Configuration Guide.
HP Serial Console Servers may also be used to support serially managed servers and devices.
KVM Support with virtual media (requires Virtual Media Interface Adapter)
HP ProLiant Server Support for virtual media
All HP ProLiant servers capable of supporting USB storage devices and USB drive keys and running Microsoft Windows 2003 or later,
RedHat 4 or later, or SLES 10 or later are supported. Requires Virtual Media Interface Adapter connected to a HP Console Switch with
Virtual Media.
HP Integrity Server Support for virtual media
For systems running Microsoft Windows 2003 or later capable of displaying VGA graphics the USB Interface Adapters with Virtual Media
may be used. Some Integrity Servers may require an optional graphics adapter.
NOTE:
Some hardware configurations and/or operating systems may only transfer virtual media at USB 1.1 speeds.
QuickSpecs
HP KVM Server Console Switch G2 with Virtual Media &
CAC
HP Server Support
DA - 13475 Worldwide — Version 7 — November 20, 2013
Page 7
Page 8
Three-year limited warranty, including hardware diagnostic support, pre-failure warranty (coverage of hard drives, memory and
processors). The warranty is fully supported by HP Services and a worldwide network of resellers and service providers. In addition 90day's getting started software telephone support may be covered under the warranty or available for an additional fee. Enhancements
to warranty services are available through HP Care Pack services.
NOTE:
Limited warranty is 3 year parts only.
Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business
requirements, from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window with options
including 4-hour response or 6-hour Call To Repair
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMWare-based IT solutions
helping to deliver high level of application availability. Response times range from 30 mins for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support Solution
HP Care Pack Services include HP branded hardware options qualified for the server, purchased at the same time or afterwards,
internal to the enclosure, as well as 22" and smaller external monitors and tower UPS options up to 3KVA. 22" and smaller external
monitors will be covered at the same service level and coverage period as the server. For servers or storage systems installed within a
rack, service also covers all HP qualified rack options installed within the same rack.
NOTE:
For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide
Web site on the internet at:
http://www.hp.com/hps/carepack
NOTE:
For more complete information on HP Services offerings, customers and resellers, please visit us at:
http://www.hp.com/hps
NOTE:
Additional information regarding worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
QuickSpecs
HP KVM Server Console Switch G2 with Virtual Media &
CAC
Service and Support
DA - 13475 Worldwide — Version 7 — November 20, 2013
Page 8
Page 9
Interface Adapters for
Virtual Media
(USB 2.0 High-Speed)
HP KVM USB2 Virtual Media Interface Adapter - 1-pack
AF603A
HP PS/2 Virtual Media Interface Adapter - 1-pack
NOTE:
Requires PS/2 mouse and keyboard connections and one USB port on server for
virtual media.
AF604A
Interface Adapters for
Virtual Media and CAC
(USB 1.1 Full-Speed)
HP KVM Console USB Virtual Media CAC Interface Adapter
AF623A
HP KVM Console PS2/USB Virtual Media CAC Interface Adapter
NOTE:
Requires PS/2 mouse and keyboard connections and one USB port on server.
AF624A
Interface Adapters for
Serial Connectivity
HP KVM Console Serial/Power G2 Interface Adapter
NOTE:
VT100 True Serial
AF625A
Interface Adapters
(support KVM functionality
only)
HP KVM CAT5 1-pack PS/2 Interface Adapter
262588-B21
HP KVM CAT5 8-pack PS/2 Interface Adapter
262587-B21
HP KVM CAT5 1-pack USB Interface Adapter
336047-B21
BladeSystem c-Class KVM Interface Adapter - 1 pack
NOTE:
Supports HP BladeSystems c-Class products only.
AF605A
CAT5e Cables
HP 3ft Qty 4 KVM CAT5 Cable
263474-B21
HP 6ft Qty 8 KVM CAT5 Cable
263474-B22
HP 12ft Qty 8 KVM CAT5 Cable
263474-B23
HP 20ft Qty 4 KVM CAT5 Cable
263474-B24
HP 40ft Qty 1 KVM CAT5 Cable
263474-B25
HP Care Pack Services
HP Install Rack and Rack Options Service
U2871E
QuickSpecs
HP KVM Server Console Switch G2 with Virtual Media &
CAC
Related Options
DA - 13475 Worldwide — Version 7 — November 20, 2013
Page 9
Page 10
HP Server Console Switch
with Virtual Media
Dimensions
Height
1.72 in (4.36 cm)
Width
17 in (43.8 cm)
Depth
9.2 in (23.68 cm)
Weight
7.0 lb (3.2 kg) 8 & 16 Port, 7.6 lb (3.4 kg) 32 Port
Power Requirements
Rated Voltage
100 to 240V AC
Rated Frequency
50 to 60 Hz
Rated Input Current
0.5 to 0.25A
Input Power
60W (max)
Heat
200 BTU/hr (max)
Temperature Range
Maximum Ambient
Operating Temperature
50° to 122° F (10° to 50° C)
Ambient Storage and
Shipping Temperature
68° to 158° F (20° to 70° C)
Temperature
Operating
50° to 122° F (10° to 50° C)
Transit
-22° to 158° F (-20° to 70° C)
Storage
-4° to 158° F (-20° to 70° C)
Relative Humidity
(non-condensing)
Operating
20% to 80%
Non-operating
5% to 95%
Video Modes Supported
VGA, SVGA, XGA
CAT 5 Cable lengths and Video Resolution Restrictions
Standard 4x3
Total Cable Length
1600X1200
@85Hz
1280x1024
@85Hz
1024x768
@85Hz
800x600
@85Hz
10'
X X X X
50'
X X X X
100'
X
Wide Screen 16x9 / 16x10
Total Cable Length
1680x1050
@60Hz
1440x900
@60Hz
1280x800
@60Hz
1024x640
@60Hz
800x500
@60Hz
10'
X X X X X
50'
X X X X X
100'
X
QuickSpecs
HP KVM Server Console Switch G2 with Virtual Media &
CAC
Technical Specifications
DA - 13475 Worldwide — Version 7 — November 20, 2013
Page 10
Page 11
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green
. To recycle your product, please go to:
http://www.hp.com/go/green
or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at:
http://www.hp.com/go/green
. These instructions may be
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
QuickSpecs
HP KVM Server Console Switch G2 with Virtual Media &
CAC
Technical Specifications
DA - 13475 Worldwide — Version 7 — November 20, 2013
Page 11
Loading...