HP A3600-24 v2 Disassembly Instructions Manual

Product End-of-Life Disassembly Instructions

Product Category: Networking Equipment

Marketing Name / Model
[List multiple models if applicable.]

HP A3600-24 v2 EI Switch (JG299A)
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.

Quantity

Item Description Notes

Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)

Batteries All types including standard alkaline and lithium coin

Mercury-containing components For example, mercury in lamps, display backlights,

Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm

Cathode Ray Tubes (CRT) 0
Capacitors / condensers (Containing PCB/PCT) 0
Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height
External electrical cables and cords 0
Gas Discharge Lamps 0
Plastics containing Brominated Flame Retardants

weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)

Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner

Components and waste containing asbestos 0
Components, parts and materials containing

refractory ceramic fibers
Components, parts and materials containing

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.

EL-MF877-00 Page 1

plate Revision B

Tem

With a surface greater than 10 sq cm

or button style batteries

scanner lamps, switches, batteries
Includes background illuminated displays with gas

discharge lamps

0

2

Include the cartridges, print heads, tubes, vent
chambers, and service stations.

0

0

of items
included
in product

1

0

0

0

0

PSG instructions for this template are available at EL-MF877-01

Tool Description Tool Size (if

applicable)

Screw driver 2#

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Unscrew the Power Cable Holder 1.

2. Unscrew all screws 2, and then remove the mounting angle 3.

3. Remove the part 4, and then remove top cover 5.

4. Remove all of the inner cables.

5. Remove plastic panel 6 from the chassis.

6. Unscrew all screws of fan 7 on base 12, and then remove fan 7 from base 12.

7. Unscrew all screws of part 8 on base 12, and then remove part 8 from base 12.

8. Unscrew all screws of Part 9 on base 12, and then remove Part 9 from base 12.

9. Unscrew all screws on PCB 10, and then remove PCB 10.

10. Unscrew all screws of Part 11 on base 12, and then remove Part 11 from base 12.

11. Remove all of the labels from the chassis.

12. Remove the part 10-2 from cover 10-1.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).

Figure 1 Unscrew the Power Cable Holder 1 and screw 2 Figure 2 Remove Part 4 and Cover 5

EL-MF877-00 Page 2
Template Revision B

PSG instructions for this template are available at EL-MF877-01