HP 798156-B21 Getting Started Guide

Download

Page 1

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Overview

Page 1

HPE ProLiant XL190r Gen9 Server

The ProLiant XL190r Gen9 Server is a 2U half-width, 2 processor server with the same configuration options as the XL170r for CPU and memory, but has additional PCIe slots in multiple configurations providing support for add support for two (2) integrated accelerators per server (GPUs or Coprocessors). This server leverages Intel’s latest Xeon E5 DDR4 HPE Smart over previous generation servers.

The dense and flexible HPE Apollo 2000 Chassis can accommodates up to two 2U hot while lowering TCO.

Rack scale power efficiency is fueled by the optional Advanced Power Management for rack, chassis, server and component level management

Item

Description

Item

Description

Bayonet board slot

Dedicated iLO port connector

DIMMs for processor 2

NMI header

DIMMs for processor 1

PCIe x16 riser board connector*

PCIe x40 riser board connector*

microSD slot

System maintenance switch

System battery

Mini-SAS connector 1 (SATA x4)

M.2 SSD riser connector

Internal USB 3.0 connector

TPM connector

Mini-SAS connector 2 (SATA x4)

Processor 1

PCIe x24 riser board connector*

Processor 2

itional expansion cards and future

-2600 v3 and E5-2600 v4 series processors increasing performance up to 30-40%, and

Memory, at speeds of up to 2133 MHz and 512GB maximum which boosts bandwidth and efficiency up to 50%

-swap server trays to meet workload needs

Front View

Page 2

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Overview

Page 2

2U Node Rear Panel Components

Item

Description

Item

Description

Node serial number and iLO label pull tab

Dedicated iLO port (optional)

SUV connector

NIC connector 1

USB 3.0 connector

NIC connector 2

Single-Slot 2U Node PCI Riser Cage Assembly

Item

Form factor

Slot number

Slot description

Storage controller / Low-profile PCIe card

PCIe3 x16 (16, 8, 4, 1) for Processor 1 Riser Cage Assembly

800293-B21

HPE XL190r Gen9 LP PCIex16 L Riser Kit Single-Slot 2U Node PCI

Page 3

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Overview

Page 3

Single-slot left PCI riser cage assembly

Item

Form factor

Slot number

Slot description

Storage controller or low-profile PCIe NIC card

PCIe3 x16 (16, 8, 4, 1) for Processor 1

FlexibleLOM 2U node riser cage assembly

798184-B21

Item

Form factor

Slot number

Slot description

FlexibeLOM

FlexibleLOM slot

PCIe x8 for Processor 1

Storage controller or accelerator card

PCIe3 x16 (16, 8, 4, 1) for Processor 1

NOTE: When using a P840/841 or a Low-Profile card in Slot 2, the maximum operating temperature is 20C.

2. With E5-16x0v3 processor, the maximum operating temperature is 23C

HPE XL190r Gen9 x16 FLOMx8 R Riser Kit

Page 4

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Overview

Page 4

Three-slot PCI riser cage assembly

Item

Form factor

Slot number

Slot description

Accelerator Card

PCIe3 x16 (16, 8, 4, 1) for Processor 1

Storage controller or low-profile PCIe NIC card

Accelerator Card

PCIe3 x16 (16, 8, 4, 1) for Processor 2

HPE XL190r x16x16x16 11OS R Riser Kit

798186-B21

Item

Form factor

Slot number

Slot description

Accelerator Card

PCIe3 x16 (16, 8, 4, 1) for Processor 2

Accelerator Card

PCIe3 x16 (16, 8, 4, 1) for Processor 2

HPE XL190r Gen9x16x16x16 GD R Riser Kit

798188-B21

2 PCIe3 x16 (16, 8, 4, 1) for Processor 2

Three-slot GPU-direct PCI riser cage assembly

Storage controller or low-profile PCIe NIC card

2 PCIe3 x16 (16, 8, 4, 1) for Processor 2

Page 5

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Overview

Page 5

Three-slot GPU-direct with re-timer PCI riser cage assembly

Item

Form factor

Slot number

Slot description

Accelerator Card

PCIe3 x16 (16, 8, 4, 1) for Processor 2

Storage controller or low-profile PCIe NIC card

Accelerator Card

PCIe3 x16 (16, 8, 4, 1) for Processor 2

HPE XL190r Gen9 GD-RT R Riser Kit

827353-B21

2 PCIe3 x16 (16, 8, 4, 1) for Processor 2

Page 6

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Standard Features

Page 6

NOTE: For the Standard Features shipped in the Factory Integrated Models, please see the "Configuration Information Factory Integrated Models" section.

Processor

E5-2600 v3 series Processors

Model

CPU frequency

Cores

L3 Cache

Power

QPI

DDR4 MHz

E5-2699v3

2.3GHz

45MB

145W

9.6GT/s

2133

E5-2698v3

2.3GHz

40MB

135W

9.6GT/s

2133

E5-2697v3

2.6GHz

35MB

145W

9.6GT/s

2133

E5-2695v3

2.3GHz

35MB

120W

9.6GT/s

2133

E5-2690v3

2.6GHz

30MB

135W

9.6GT/s

2133

E5-2683v3

2.0GHz

35MB

120W

9.6GT/s

2133

E5-2680v3

2.5GHz

30MB

120W

9.6GT/s

2133

E5-2670v3

2.3GHz

30MB

120W

9.6GT/s

2133

E5-2667v3

3.2GHz

20MB

135W

9.6GT/s

2133

E5-2660v3

2.6GHz

25MB

105W

9.6GT/s

2133

E5-2650v3

2.3GHz

25MB

105W

9.6GT/s

2133

E5-2650Lv3

1.8GHz

25MB

65W

9.6GT/s

2133

E5-2643v3

3.4GHz

20MB

135W

9.6GT/s

2133

E5-2640v3

2.6GHz

20MB

90W

8.0GT/s

1866

E5-2637v3

3.5GHz

15MB

135W

9.6GT/s

2133

E5-2630v3

2.4Ghz

20MB

85W

8.0GT/s

1866

E5-2630Lv3

1.8GHz

25MB

55W

8.0GT/s

1866

E5-2620v3

2.4GHz

15MB

85W

8.0GT/s

1866

E5-2609v3

1.9GHz

15MB

85W

8.0GT/s

1600

E5-2603v3

1.6GHz

15MB

85W

6.4GT/s

1600

Processor

E5-2600 v4 series Processors (Please follow product offering to fill out processor SKU)

Model

CPU frequency

Cores

L3 Cache

Power

QPI

DDR4 Hz

E5-2603v4

1.7GHz

15MB

85W

9.6GT/s

1866

E5-2609v4

1.7GHz

20MB

85W

9.6GT/s

1866

E5-2620v4

2.1GHz

20MB

85W

9.6GT/s

2133

E5-2623v4

2.6GHz

10MB

85W

9.6GT/s

2133

E5-2630Lv4

1.8GHz

25MB

55W

9.6GT/s

2133

E5-2630V4

2.2GHz

20MB

85W

9.6GT/s

2133

E5-2637V4

3.5HGz

15MB

135W

9.6GT/s

2133

E5-2640V4

2.4GHz

25MB

90W

9.6GT/s

2400

E5-2643V4

3.4GHz

20MB

135W

9.6GT/s

2400

E5-2650LV4

1.7GHz

35MB

65W

9.6GT/s

2400

E5-2650V4

2.2GHz

30MB

105W

9.6GT/s

2400

E5-2660V4

2.0GHz

35MB

105W

9.6GT/s

2400

One of the following depending on Model

Page 7

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Standard Features

Page 7

E5-2667V4

3.2GHz

25MB

135W

9.6GT/s

2400

E5-2680V4

2.4GHz

35MB

120W

9.6GT/s

2400

E5-2683V4

2.1GHz

40MB

120W

9.6GT/s

2400

E5-2690V4

2.6GHz

35MB

135W

9.6GT/s

2400

E5-2695V4

2.1GHz

45MB

120W

9.6GT/s

2400

E5-2697V4

2.3GHz

45MB

145W

9.6GT/s

2400

E5-2698V4

2.2GHz

50MB

135W

9.6GT/s

2400

E5-2697AV4

2.6GHz

40MB

145W

9.6GT/s

2400

E5-2699V4

2.2GHz

55MB

145W

9.6GT/s

2400

Processor

E5-1600 v3 series Processors (Please follow product offering to fill out processor SKU)

Model

CPU frequency

Cores

L3 Cache

Power

DDR4 Hz

E5-1680v3

3.2GHz

20MB

140W

2133

E5-1650v3

3.5GHz

15MB

140W

2133

E5-1630v3

3.7GHz

10MB

140W

2133

HPE XL190r LP PCIex16 L Riser Kit - 800293-B21

Chipset

Intel® C610 Series Chipset

NOTE: For more information regarding Intel® chipsets, please see the following URL:

http://www.intel.com/products/server/chipsets/

On System Management

HPE iLO (Firmware: HPE iLO 4)

NOTE: For more information, visit: http://www.hp.com/go/ilo

Memory Protection

Advanced ECC (multi-bit error protection) Memory Online Spare Mode (Rank Spare Mode)

Memory

Type

HPE SmartMemory

DDR4 Load Reduced (LRDIMM), or Registered (RDIMM)

DIMM Slots Available

16 DIMM Slots available

2TB (16 x 128GB)

NOTE: HPE memory from previous generation servers are not fully compatible with the HPE

Depending on the memory configuration and processor model, the memory speed may run at

Memory Configuration Tool at: http://h22195.www2.hpe.com/MemoryTool/Home/Legal

Network Controller

Ethernet Options

HPE Ethernet 10Gb 2P 530SFP+ Adptr

One of the following depending on Model

NOTE: : these processors are supported with the following risers kits.

• HPE XL190r Gen9 x16 FLOM x8 R Riser Kit 798184-B21

Processor

ProLiant XL190r Gen9 Server. NOTE: To realize the performance memory capabilities listed in this document, HPE SmartMemory isrequired. For additional information, please see the HPE SmartMemory QuickSpecs at:

https://www.hpe.com/h20195/v2/gethtml.aspx?docname=c04111535

NOTE: LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server. NOTE:

2400MHz, 2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or the Online

HPE Ethernet 1Gb 2P 332T Adptr HPE Ethernet 1Gb 4-port 331T Adapter HPE Ethernet 1Gb 2P 361T Adptr

Page 8

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Standard Features

Page 8

HPE Ethernet 10Gb 2P 530T Adptr

FlexibleLOM options. Max operating temp is 23C ambient. Max operating temp is 23C ambient

HPE Server ROM

indicates the number of physical electrical lanes running to the connector.

• Processor and chipset status registers

HPE Ethernet 10Gb 2P 560SFP+ Adptr HPE Ethernet 10Gb 2P 561T Adptr HPE Ethernet 10Gb 2P 561FLR-T Adptr HPE Ethernet 10G 2-port 546SFP+ Adptr HPE 1Gb Ethernet 4P 331FLR Adptr HPE Ethernet 1Gb 4-port 366FLR Adapter HPE Ethernet 10Gb 2P 560FLR-SFP+ Adptr HPE FlexFabric 10Gb 2P 534FLR-SFP+ Adptr HPE FlexFabric 10Gb 2P 533FLR-T Adptr HPE FlexFabric 10Gb 2P 556FLR-SFP+ Adptr HPE FlexFabric 10Gb 4-port 536FLR-T Adapter HPE FlexFabric 10Gb 2-port 536FLR-T Adapter HPE Ethernet 10Gb 2P 546FLR-SFP+ Adptr HPE Ethernet 10Gb 2-port 562SFP+ Adptr HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adpt HPE StoreFabric CN1200E-T 10Gb CAN HPE StoreFabric CN1100R-T 10Gb CNA

InfiniBand Options

HPE IB FDR/EN 40Gb 2P 544+FLR-QSFP Adptr HPE IB QDR/EN 10Gb 2P 544+FLR-QSFP Adptr HPE IB FDR/EN 40Gb 2P 544+QSFP Adptr HPE IB FDR 2P 545FLR-QSFP Adptr HPE IB FDR 2P 545QSFP Adptr QLogic 4X QDR IB PCI-e G2 HCA HPE IB EDR/EN 100Gb 1P 840QSFP28 Adptr HPE IB EDR/EN 100Gb 2P 840QSFP28 Adptr HPE 100Gb 1p OP101 QSFP28 x16 OPA Adptr HPE 100Gb 1p OP101 QSFP28 x16 OPA Adptr Riser Options to support FlexibleLOM cards HPE XL190r Gen9 LPx16 FLOMx8 R Riser Kit

NOTE: The HPE XL190r Gen9 LPx16 FLOMx8 R Riser Kit (798184-B21) is required to order the

NOTE:

* FHFLDW allows for cards up to 10.5” in Length

HPE ROM (Read Only Memory) is now digitally signed using the HPE Corporate Signing Service. This signature is verified before the flash process starts, reducing accidental programming and preventing malicious efforts to corrupt system ROM.

HPE ROM provides for essential initialization and validation of hardware components before control is passed to the customer-installed operating system. The ROM also provides the capability of booting from various fixed media (HDD, CD-ROM) and removable media (USB), to continue operation to the operating system.

HPE ROM performs very early configuration of the video controller, to allow monitoring of initialization progress via an attached monitor. If configuration or hardware errors are discovered during this early phase of hardware initialization, suitable messages are now displayed on the connected monitor. Additionally, these configuration or hardware errors are logged to the Integrated Management Log (IML) to assist in diagnosis.

The HPE ProLiant ROM is used to configure the following:

Page 9

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Standard Features

Page 9

• System memory, memory map, and memory initialization

http://www.hp.com/support/rbsu.

HPE Server Unified

The HPE ProLiant System BIOS is an EDK2 UEFI solution, and adheres to the latest revisions of UEFI Class 2 specifications which supports both legacy boot and UEFI boot operation. The XL190r operation.

NOTE:

properly to support UEFI.

NOTE:

the UEFI Information Library:

NOTE:

UEFI mode in the factory.

To modify the se

ProLiant POST screen to enter the UEFI System Utilities screen. By default, the System Utilities menus are in the English language.

UEFI enables numerous new capabilities, including both industr specific to HPE

•

NOT

•

Storage Controller

Smart Array Controller

HPE Smart Array P840/4G Controller

• System hardware configuration (Integrated PCI devices and optional PCIe cards).

• Customer-specific BIOS configuration (using the HPE ROM-Based Setup Utility (RBSU).

NOTE: For further information, please refer to the HPE RBSU (ROM based setup utility) user guide:

Extensible Firmware Interface (UEFI) or Legacy Mode

Gen9 defaults to UEFI boot operation and can be factory or field configured for Legacy boot

For UEFI boot operation, boot environment and OS image installations should be configured

For more information on Hewlett Packard Enterprise's ProLiant System BIOS and UEFI, see

http://www.hp.com/go/uefi/docs

HPE Legacy FIO Mode Setting (758959-B22) can be selected to configure the system in

rver configuration ROM default settings, press F9 in the HPE

HPE ProLiant servers. Following are some of the features that UEFI enables and that the

ProLiant XL190r Gen9 can support when configured for UEFI boot operation:

Secure Boot - A new feature in which the system firmware, option card firmware, operating

y standard functionality and features

systems, and software collaborate to greatly enhance platform security.

Operating system specific functionality - Microsoft Windows 2012 supports several features only

when installed in UEFI mode.

Support for > 2.2 TB (using GPT) boot drives - Such drives could previously only be used for boot

drives when using RAID solutions such as HPE Smart Array.

UEFI Shell - Provides a pre-boot environment for running scripts and tools. The HPE ProLiant

UEFI Shell provides both standard capabilities as well as numerous enhancements.

PXE boot support for IPv6 networks. PXE Multicast Boot allowing for faster PXE deployments for large numbers of servers. Boot support for option cards that only support a UEFI option ROM.

When the server is configured for UEFI Boot Mode, PXE servers must be configured with a UEFI

boot image.

When the server boots in UEFI mode, it does not boot media with a legacy OS installation. This

includes DOS targets and Windows or Linux systems installed in Legacy mode. The reverse is also true for servers that boot in Legacy mode.

If Microsoft Windows 2008 or Windows 2008 R2 is used in UEFI Boot Mode, UEFI Optimized

Mode must be disabled (this option is enabled by default). This is required to work around an issue in Windows 2008 / 2008 R2 that requires legacy BIOS components necessary for video operations in Windows.

HPE ProLiant

HPE Dynamic Smart Array B140i Controller HPE Smart Array P440/4G Controller HPE Smart Array P441/4G Controller

Page 10

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Standard Features

Page 10

HPE Smart Array P841/4G Controller

support, AHCI mode is required.

Internal Storage Devices

Internal MicroSD slot

Maximum Internal

Hot Plug LFF SAS 10k

24TB

x 6TB

Hot Plug LFF SATA

4.0TB

6 x 1TB

Hot Plug LFF SATA SSD

1.9 TB

6 x 480GB

Hot Plug LFF SAS SSD

19.2TB

12 X 1.6TB

Hot Plug SFF SAS 7.2k

12TB

12 X 1.0TB

Hot Plug SFF SAS 10k

21.6TB

12X1.8TB

Hot Plug SFF SAS 15k

7.2TB

12X600GB

Hot Plug SFF SATA

12TB

12X1TB

Hot Plug SFF SATA SSD

11.5TB

12X960GB

Hot Plug SFF SAS SSD

19.2TB

12X1.6TB

Interfaces

FlexibleLOM

HPE ProLiant Gen9 servers offer a new networking technology-Flexible

depending on workload. For further details on the choices, see FlexibleLOM in the Networking Section of this document.

KVM

Serial USB Video Port (SUV)

MicroSD

1 (internal)

USB Ports

2 (external via SUV) 1 (USB 3.0 internal)

HPE iLO Remote

Port

Health LED

Power

UID

Do not remove LED

Industry Standard

ACPI 2.0b Compliant

PCIe 3.0 Compliant

WOL Support

Microsoft® Logo certifications

PXE Support

USB 1.1 and 2.0 Compliant

Storage

Host Bus Adapter HPE H240 Host Bus Adapter HPE H241 Smart HBA Storage Controller Cable Kits HPE XL190r B140i Cbl FIO Kit HPE XL190r Gen9 Mini-SAS H240 Cbl Kit HPE XL190r Gen9 Mini-SAS P440 Cbl Kit HPE XL1x0r Gen9 Mini-SAS P840/440 Cbl Kit

NOTE: The H240 controller and the embedded B140i will operate in UEFI mode only. For legacy

Network Technology. The HPE ProLiant Gen9 server offers the customer the choice of 1Gigabit, 10Gigabit, InfiniBand or FlexibleLOM solutions

Management Network

Aggregated via HPE Apollo 2000 Chassis

Compliance

Page 11

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Standard Features

Page 11

SMBIOS 2.6.1

Power Ratings

To review typical system power ratings use the HPE Power Advisor which is available via the online

https://www.hpe.com/h20195/v2/gethtml.aspx?docname=c04111541

Operating Systems and

Microsoft Windows Server

http://www.hp.com/go/ossupport

http://www.hp.com/support.

Graphics

Integrated Matrox G200 video standard

Form Factor

The ProLiant XL190r Gen9 Server is a single-slot 2U tray for the HPE Apollo 2000 Chassis.

Embedded Management

HPE Integrated Lights

Monitor your servers for ongoing management, service alerting, reporting

UEFI

Configure and boot your servers securely with industry standard Unified

http://www.hp.com/go/ProLiant/uefi.

HPE RESTful API

RESTful API is an application programming interface. RESTful Web Service

http://www.hp.com/go/restfulapi.

Intelligent Provisioning

Provision servers by discovering and deploying 1 to few servers with

http://www.hp.com/go/intelligentprovisioning.

Server Utilities

HPE Smart Update

Optimize firmware and driver updates with HPE Smart Update solutions. Learn more at http://www.hp.com/go/smartupdate.

HPE Systems Insight

HPE SIM allows you to monitor the health of your HPE ProLiant Servers

http://www.hp.com/go/sim

Scripting Tool Kit and

Provision 1 to many servers using your own scripts to discover and deploy

http://www.hp.com/go/ProLiantSTK

tool located at URL: http://www.hp.com/go/proliant-energy-efficient or http://www.hp.com/go/hppoweradvisor.

NOTE: Power Specification and Technical Content for supported power supplies can be found at:

Virtualization Software Support for ProLiant Servers

Red Hat Enterprise Linux (RHEL) SUSE Linux Enterprise Server (SLES) Canonical Ubuntu VMware

NOTE: Only 64-bit versions of these operating systems are supported. NOTE: For more information on the Hewlett Packard Enterprise Certified and Supported ProLiant

Servers for OS and Virtualization Software and more OS support timeline such as Debian, CentOS, Fedora, OpenSUSE and Asianux, please visit our OS support site at

and our driver download page:

• 1280 x 1024 (32 bpp)

• 1920 x 1200 (16 bpp)

HPE iLO 4 On System Management Memory

• 16 MB Flash

• 256 MB DDR 3 with ECC (112 MB after ECC and video)

Out

and remote management with iLO. Learn more at

http://www.hp.com/go/ilo.

Extensible Firmware Interface (UEFI). Learn more at

API served by iLO’s web server.

Intelligent Provisioning. Learn more at

Manager (HPE SIM)

and HPE Integrity Servers, and also provides you with basic support for non-Hewlett Packard Enterprise servers. HPE SIM also integrates with HPE SUM to provide quick and seamless firmware updates. Learn more at

Windows PowerShell

them with HPE Scripting Tool Kit for Windows and Linux or HPE Scripting Tools for Windows PowerShell. Learn more at

Page 12

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Standard Features

Page 12

http://www.hp.com/go/powershell.

HPE RESTful Interface

HPE RESTful API tool is a scripting tool to provision servers using RESTful

http://www.hp.com/go/restfulapi

HPE iLO Mobile

Enables the ability to access, deploy, and manage your server anytime from

http://www.hp.com/go/ilo/mobileapp

HPE Insight Online

HPE Insight Online, available at no additional cost as part of your Hewlett

http://www.hp.com/go/insightonline/info.

Embedded Management

HPE Integrated Lights

Monitor your servers for ongoing management, service alerting, reporting

http://www.hp.com/go/ilo

HPE Insight

HPE Service Pack for

HPE Service Pack for ProLiant (SPP) and HPE Smart Update Manager

software maintenance. Together they provide better operating stability and

downloaded from http://www.hp.com/go/spp/download.

Tool

Application

API Interface to discover and deploy servers at scale. Learn more at

anywhere from select smartphones and mobile devices. For additional information please visit:

Packard Enterprise warranty, Care Pack or contractual support agreement with Hewlett Packard Enterprise, is a personalized dashboard for simplified tracking of IT operations and support information from anywhere, anytime. Learn more at

management software

Out

ProLiant (SPP)

and remote management with iLO. Learn more at

(HPE SUM) provide a comprehensive approach to firmware and system

ensure maximum uptime. The SPP will be updated at a predictable cadence, typically coinciding with new Hewlett Packard Enterprise server hardware launches. By enabling firmware to be updated online and integrating firmware and system software updates in one operation, HPE SUM and the SPP offer faster updates of individual servers and dramatically faster updates of entire HPE Apollo 2000 Chassis. Further improving system uptime and stability is the fact that Hewlett Packard Enterprise provides 12 months of support for each Service Pack for ProLiant release (may vary by region).

The user experience around HPE SUM and the SPP has been improved in several ways, starting with the web download. A single web page provides access to a single download containing both the latest version of HPE SUM and the latest SPP. Optional smaller subsets with only specific types of servers or specific operating systems are offered to save on download time. The HPE SUM application provides a straightforward, intuitive user interface that guides the user through the steps of discovery, analyses and update, providing comprehensive information on available updates, criticality and interdependencies. This information is also available in reports. By providing the option of multiple local or shared repositories which can be easily updated from hp.com, HPE SUM provides the tools to optimize stability and consistency throughout the company. While HPE SUM and the SPP recommend the combinations of firmware and system software that Hewlett Packard Enterprise has found to be the best practice, the application gives customers the flexibility to set their own specific baseline.

The Service Pack for ProLiant has been rigorously tested with specific attention for interaction between firmware, drivers and agents both within the server as well as in interaction with the HPE Apollo 2000 chassis. This testing ensures the highest quality as well as providing the input for HPE SUM to deploy updates taking into account all interdependencies, when

determining the correct updates and order of update deployment.

NOTE: The Service Pack for ProLiant (which includes HPE SUM) can be

Page 13

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Standard Features

Page 13

More information can be found: http://www.hp.com/go/SmartUpdate ,

http://www.hp.com/go/spp

http://www.hp.com/go/hpsum

Security

Power-on password

Keyboard password

Serial interface control

Administrator's password

iLO 4 (Integrated Lights-Out 4) has 12 customizable user accounts and SSL encryption

iLO 4 can be disabled via a Global Setting

iLO Advanced supports directory services integration

TPM (Trusted Platform Module) 2.0 option

Warranty

This product is covered by a global limited warranty and supported by Hewlett Packard Enterprise

Hardware diagnostic support and repair is available for one year from date of purchase.

Onsite support with next business day response

and

Services and a worldwide network of Hewlett Packard Enterprise Authorized Channel Partners (may vary by region). Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services are available through HPE Care Pack services or customized service agreements. Hard drives have either a one year or three year warranty.

NOTE: Server Warranty includes 1 year Parts, 1 year Labor, 1-year on-site support with next business day response. Warranty repairs may be accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity. Customers may choose to have Hewlett Packard Enterprise replace Optional CSR parts at no charge. Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hpe.com/products/servers/platforms/warranty/index.html

http://www.hp.com/go/insightcontrol

NOTE: In Asia Pacific, Japan and China, Server Warranty includes 3 years Parts, 3 year Labor, 3-year

Page 14

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Optional Features

Page 14

HPE Insight

HPE Insight Control

HPE Insight Control, a product option, delivers essential infrastructure

http://www.hpe.com/services/insight.

HPE iLO Advanced

HPE Integrated Lights-Out Advanced License a product option, providing

http://www.hp.com/go/iloadvance

HPE iLO Scale-Out

The HPE iLO Scale-Out license ideal for web/hosting/cloud service

iders and High Performance Computing environments. This license is a

Out license

HPC customers now have a server management package solely design and

http://www.hp.com/go/iLO/scale-out

HPE Matrix Operating

The HPE Matrix Operating Environment (Matrix OE) for ProLiant and

Matrix OE includes the automated provisioning, optimization, and

NOTE:

http://www.hp.com/go/matrixoe

High Performance

HPE Cluster Platforms

HPE Cluster Platforms are specifically engineered, factory-integrated large-

Platform Configurator simplifies ordering. http://www.hp.com/go/clusters

HPE HPC Interconnects

High Performance Computing (HPC) interconnect technologies are

http://www.hpe.com/techservers/clusters/ucp/index.html

management software

management that can help save time and money by making it easy to deploy, migrate, monitor, remote control, and optimize your IT infrastructure through a single, simple management console. For more information, see:

http://www.hp.com/go/insightcontrol

HPE Insight Control includes one year of 24 x 7 HPE Software Technical Support and Update Service ensuring rapid access to Hewlett Packard Enterprise support staff and proactive delivery of software updates. For more information about this service, see:

smart remote server management without compromise. iLO Advanced unlocks the full set of remote administration functionality for all HPE ProLiant servers by activating the full Virtual Keyboard Video and Mouse remote console, multi-user collaboration, console record and replay, GUIbased and scripted virtual media and virtual folders, and enhanced security and power management functionality. For more information, see:

prov specific subset of iLO Advanced functionality, provides fast remote access through Text Console via SSH, lower operational cost with Dynamic power capping, and faster time to resolution through Email-based Alerting and proactive notifications. With this newly designed HPE iLO Scale-

priced for their massive data environments. HPE iLO Scale-Out is available on all HPE ProLiant Gen9 servers. For more information, see:

Environment

Integrity servers is an integrated command center that helps you instantly adjust to dynamic business demands. This advanced infrastructure management software lets you reduce the cost of common data center tasks by up to 40 percent while keeping pace with your changing business. The HPE recovery management capabilities for HPE CloudSystem Matrix, the ideal platform for private cloud and Infrastructure as a Service (IaaS).

For more information, visit:

Clusters

scale ProLiant clusters optimized for High Performance Computing, with a choice of servers, networks and software. Operating system options include specially priced offerings for Red Hat Enterprise Linux and SUSE Linux Enterprise Server, as well as Microsoft Windows HPC Server. A Cluster

available for this server as part of the HPE Cluster Platform portfolio. These high-speed InfiniBand and Gigabit interconnects are fully supported by Hewlett Packard Enterprise when integrated within an Hewlett Packard Enterprise cluster. Flexible, validated solutions can be defined with the help of configuration tools.

Page 15

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Optional Features

Page 15

HPE Insight Cluster

HPE Insight Cluster Management Utility (CMU) is an Hewlett Packard

tools that are used for lifecycle management of hyperscale clusters of Linux

clusters user friendly, efficient, and effective. http://www.hp.com/go/cmu

HPE Insight Online

HPE Insight Online is a new addition to the HPE Support Center for one stop, secure access to product and Online can automatically display devices remotely monitored by Insight Online's easy navigation you can efficiently track from anywhere and at any time. http://www.hp.com/go/insightonline

Management Utility

Enterprise-licended and Hewlett Packard Enterprise-supported suite of

ProLiant systems. CMU includes software for the centralized provisioning, management and monitoring of nodes. CMU makes the administration of

Hewlett Packard Enterprise support information personalized to your IT environment. Insight

HPE Insight Remote Support. With

your IT support contracts and device status

Page 16

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Service and Support

Page 16

Service and Support

The support Care Packs chosen for the chassis are applied to this server node at no additional cost.

recommended services; optimized, standard, or basic.

For more information

To learn more on HPE ProLiant servers, please contact your Hewlett Packard Enterprise sales

http://hp.com/go/lookuptool and in step 2 select HPE ProLiant, then select HPE Apollo family.

HPE Technology Services for HPE Apollo 2000 HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability. Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. Our support technology lets you to tap into the knowledge of millions of devices and thousands of experts to stay informed and in control, anywhere, any time.

Support for the HPE Apollo 2000, APM and chassis are all covered by support purchased at the chassis level. This simplifies your support experience and can reduce total cost of ownership over support purchased per server.

What HPE Technology Services can do for you We can help you design, deploy, test, integrate, support, and manage IT and infrastructure solutions. Our services solutions include more than just uplift of base warranty; we help deliver high levels of application availability through proactive service management and advanced technical response.

Protect your business beyond warranty with HPE Care Pack Services that provide total support expertise to meet your IT and business needs. We have made it simple to select among 3 levels of

representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit: http://www.hpe.com/services/proliant

To find the full list of Care Pack SKUs for the HPE Apollo family of products, go to:

Page 17

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Informa

tion – Factory Integrated Models

Page 17

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations

HPE Apollo 2000Chassis

Step 1: Base Configuration (Choose one of the CTO Models below)

HPE CTO Model

HPE ProLiant XL190r Gen9 2U Node Configure-to-order Server

798156-B21

Step 2: Choose Required Options (only one from each category unless otherwise noted)

HPE XL1x0r Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) FIO Processor Kit

793012-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) FIO Processor Kit

793014-L21

HPE XL1x0R Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) FIO Processor Kit

793016-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) FIO Processor Kit

793018-L21

HPE XL1x0 Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W) FIO Processor Kit

793048-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) FIO Processor Kit

793020-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) FIO Processor Kit

793022-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) FIO Processor Kit

793024-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) FIO Processor Kit

793026-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) FIO Processor Kit

793028-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W) FIO Processor Kit

793030-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W) FIO Processor Kit

793032-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W) FIO Processor Kit

793034-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W) FIO Processor Kit

793036-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/135W) FIO Processor Kit

793038-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W) FIO Processor Kit

793046-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) FIO Processor Kit

793050-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W) FIO Processor Kit

793054-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W) FIO Processor Kit

793056-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2603v4 (1.7GHz/6-core/15MB/85W) FIO Processor Kit

850286-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2609v4 (1.7GHz/8-core/20MB/85W) FIO Processor Kit

850288-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2620v4 (2.1GHz/8-core/20MB/85W) FIO Processor Kit

850290-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2623v4 (2.6GHz/4-core/10MB/85W) FIO Processor Kit

850292-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2630Lv4 (1.8GHz/10-core/25MB/55W) FIO Processor Kit

850294-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2630v4 (2.2GHz/10-core/20MB/85W) FIO Processor Kit

850296-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2637v4 (3.5GHz/4-core/15MB/135W) FIO Processor Kit

850298-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2640v4 (2.4GHz/10-core/25MB/90W) FIO Processor Kit

850300-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2643v4 (3.4GHz/6-core/20MB/135W) FIO Processor Kit

850302-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2650Lv4 (1.7GHz/14-core/35MB/65W) FIO Processor Kit

850304-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2650v4 (2.2GHz/12-core/30MB/105W) FIO Processor Kit

850306-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2660v4 (2.0GHz/14-core/35MB/105W) FIO Processor Kit

850308-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2667v4 (3.2GHz/8-core/25MB/135W) FIO Processor Kit

850310-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2680v4 (2.4GHz/14-core/35MB/120W) FIO Processor Kit

850314-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2683v4 (2.1GHz/16-core/40MB/120W) FIO Processor Kit

850316-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2690v4 (2.6GHz/14-core/35MB/135W) FIO Processor Kit

850318-L21

are ordered, Hewlett Packard Enterprise recommends the use of an Hewlett Packard Enterprise approved configurator. Contact your local sales representative for information on configurable product offerings and requirements.

NOTE: FIO indicates that this option is only available as a factory installable option. NOTE: HPE Apollo 2000 Chassis is required to support the server. Refer to their QuickSpecs for additional information.

Page 18

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Information

– Factory Integrated Models

Page 18

HPE XL1x0r Gen9 Intel® Xeon® E5-2695v4 (2.1GHz/18-core/45MB/120W) FIO Processor Kit

850320-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2697v4 (2.3GHz/18-core/45MB/145W) FIO Processor Kit

850322-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2698v4 (2.2GHz/20-core/50MB/135W) FIO Processor Kit

850324-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-2699v4 (2.2GHz/22-core/55MB/145W) FIO Processor Kit

850326-L21

HPE XL1x0r Gen9 Intel® Xeon® E5

845119-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-1650v3 (3.5GHz/6-core/15MB/140W) Processor Kit

845121-L21

HPE XL1x0r Gen9 Intel® Xeon® E5-1680v3 (3.2GHz/4-core/20MB/140W) Processor Kit

845123-L21

NOTE: If two processors are desired, select one xxxxxx-L21 processor and one corresponding xxxxxx-B21. Up to two processors are supported. Mixing of processor speeds and types within the server is not supported.

NOTE:

'Memory Speed by Processor Model' table in the Memory section of the

NOTE: NOTE:

frequency boost increment is dependent on the processor higher boost increment is obtained when fewer cores are active.

NOTE:

Actual memory speed may depend on the

quantity and type of DIMMs installed.

NOTE:

Product Line (E3, E5, E7); 2600x, 2 = number of CPUs in a Node, 6 is sock Processor

NOTE:

2603 v3 and E5

NOTE: NOTE: operate. Please see the see the "Memory" section later in this document.

HPE Memory

NOTE: Minimum 2 DIMMs are required. NOTE:

SmartMemory is required to realize the memory performance improvements and enhanced functionality listed in this document for Gen9. For additional information, please see the

http://www8.hpe.com/h20195/v2/GetHTML.aspx?docname=c04111535

NOTE: NOTE:

2133MHz, 1866MHz, or 1600MHz. Please see Memory Population Table or the Online Memory Configuration Tool at: http://h22195.www2.hpe.com/MemoryTool/Home/Legal

Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors

HPE 4GB (1x4GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit

726717-B21

HPE 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit

726718-B21

HPE 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit

759934-B21

HPE 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit

726719-B21

HPE 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit

728629-B21

Registered DIMMs (RDIMMs) - E5-2600 v4 series Processors

HPE 8GB (1x8GB) Single Rank x8 DDR4-2400 CAS-17-17-17 Registered Memory Kit

805347-B21

HPE 16GB (1x16GB) Single Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit

805349-B21

HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit

805351-B21

HPE 16GB (1x16GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Registered Memory Kit

836220-B21

Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors

HPE 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit

726722-B21

HPE 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit

726720-B21

Load Reduced DIMMs (LRDIMMs) - E5-2600 v4 series Processors

HPE 32GB (1x32GB) Dual Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit

805353-B21

-1630v3 (3.7GHz/4-core/10MB/140W) Processor Kit

For the maximum supported memory speeds for each processor listed above, please reference the

QuickSpecs.

HT indicates that the processor model supports Intel® Hyper-Threading Technology. Turbo indicates the maximum potential frequency when using Intel® Turbo Boost Technology. The

SKU and the number of active cores. In general, a

DDR4 speed is the maximum memory speed of the processor.

For the Intel® C610 Chipset E5-2600 v3 Series, the letter preceding the model number indicates the

et/segment designation, 00 =

SKU, and x = L for low power SKUs.

All processors support Intel® Hyper-Threading and Intel® Turbo Boost Technologies except the E5-

-2609 v3.

The letter "L" following the model number denotes lower wattage. The processor model as well as the memory configuration determines the maximum speed memory can

HPE memory from previous generation servers (DDR3) is not compatible with this server. HPE

HPE SmartMemory QuickSpecs at:

LRDIMM and RDIMM are distinct memory technologies and cannot be mixed within a server. Depending on the memory configuration and processor model, the memory speed may run at

Page 19

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Information

– Factory Integrated Models

Page 19

HPE 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit

805358-B21

HPE 64GB (1x64GB) Quad Rank x4 DDR4-2400 CAS-17-17-17 Load Reduced Memory Kit

805358-B21

HPE 128GB (1x128GB) Octal Rank x4 DDR4-2400 CAS-20-18-18 Load Reduced Memory Kit

809208-B21

Step 3: Choose Additional Factory Integrated Options (only one from each category unless

BIOS Mode

HPE Legacy FIO Mode Setting

Legacy Mode.

758959-B21

Controller State

784308-B21

792962-B21

Step 4: Choose Additional Options for Factory Integration from Core and Additional Options

approved configurator. Contact your local sales representative

for additional information.

HPE Processors

HPE XL1x0r Gen9 Intel® Xeon® E5-2603v3 (1.6GHz/6-core/15MB/85W) Processor Kit

793012-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2609v3 (1.9GHz/6-core/15MB/85W) Processor Kit

793014-B21

HPE XL1x0R Gen9 Intel® Xeon® E5-2620v3 (2.4GHz/6-core/15MB/85W) Processor Kit

793016-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2630v3 (2.4GHz/8-core/20MB/85W) Processor Kit

793018-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2640v3 (2.6GHz/8-core/20MB/90W) Processor Kit

793020-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2650v3 (2.3GHz/10-core/25MB/105W) Processor Kit

793022-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2660v3 (2.6GHz/10-core/25MB/105W) Processor Kit

793024-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2670v3 (2.3GHz/12-core/30MB/120W) Processor Kit

793026-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2680v3 (2.5GHz/12-core/30MB/120W) Processor Kit

793028-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2690v3 (2.6GHz/12-core/30MB/135W) Processor Kit

793030-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2697v3 (2.6GHz/14-core/35MB/145W) Processor Kit

793032-B21

HPE XL1x0 Gen9 Intel® Xeon® E5-2695v3 (2.3GHz/14-core/35MB/120W) Processor Kit

793048-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2637v3 (3.5GHz/4-core/15MB/135W) Processor Kit

793034-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2643v3 (3.4GHz/6-core/20MB/135W) Processor Kit

793036-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2667v3 (3.2GHz/8-core/20MB/135W) Processor Kit

793038-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2683v3 (2GHz/14-core/35MB/120W) Processor Kit

793046-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2650Lv3 (1.8GHz/12-core/30MB/65W) Processor Kit

793050-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2698v3 (2.3GHz/16-core/40MB/135W) Processor Kit

793054-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2699v3 (2.3GHz/18-core/45MB/145W) Processor Kit

793056-B21

otherwise noted)

NOTE: If B140i is the only primary controller, then this option cannot be selected.

When this option is selected, then BIOS need to be switched from default UEFI Mode to

HPE FIO Enable B140i Setting

NOTE: Must be selected when B140i is used as primary controller and RAID is desired.

HPE Mfg FIO Enable HBA Mode Setting

NOTE: When selected if H240ar/H240 are used as the primary controller then RAID is not allowed.

sections below.

NOTE: for additional options, please refer to “Core Options” and “Additional Options” section below. NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, Hewlett Packard

Enterprise recommends the use of an Hewlett Packard Enterprise

Page 20

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Information

– Factory Integrated Models

Page 20

HPE XL1x0r Gen9 Intel® Xeon® E5-2620v4 (2.1GHz/8-core/20MB/85W) Processor Kit

850290-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2623v4 (2.6GHz/4-core/10MB/85W) Processor Kit

850292-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2630Lv4 (1.8GHz/10-core/25MB/55W) Processor Kit

850294-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2630v4 (2.2GHz/10-core/25MB/85W) Processor Kit

850296-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2640v4 (2.4GHz/10-core/25MB/90W) Processor Kit

850300-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2643v4 (3.4GHz/6-core/20MB/135W) Processor Kit

850302-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2650Lv4 (1.7GHz/14-core/35MB/65W) Processor Kit

850304-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2650v4 (2.2GHz/12-core/30MB/105W) Processor Kit

850306-B21

core/35MB/105W) Processor Kit

HPE XL1x0r Gen9 Intel® Xeon® E5-2667v4 (3.2GHz/8-core/25MB/135W) Processor Kit

850310-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2680v4 (2.4GHz/14-core/35MB/120W) Processor Kit

850314-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2683v4 (2.1GHz/16-core/40MB/120W) Processor Kit

850316-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2690v4 (2.6GHz/14-core/35MB/135W) Processor Kit

850318-B21

core/45MB/120W) Processor Kit

HPE XL1x0r Gen9 Intel® Xeon® E5-2697v4 (2.3GHz/18-core/45MB/145W) Processor Kit

850322-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2697Av4 (2.6GHz/16-core/40MB/145W) Processor HPE XL1x0r Gen9 Intel® Xeon® E5-2698v4 (2.2GHz/20-core/50MB/135W) Processor Kit

850324-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2699v4 (2.2GHz/22-core/55MB/145W) Processor Kit

850326-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-1630v3 (3.7GHz/4-core/10MB/140W) Processor Kit

845119-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-1650v3 (3.5GHz/6-core/15MB/140W) Processor Kit

845121-B21

845123-B21

NOTE: For 845119-B21, 845121-B21, and 845123-B21 installed in XL190r gen9,

should be under 23°C ambient temperature.

Registered DIMMs (RDIMMs) - E5-2600 v3 series Processors

HPE 4GB (1x4GB) Single Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit

726717-B21

HPE 8GB (1x8GB) Single Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit

726718-B21

HPE 8GB (1x8GB) Dual Rank x8 DDR4-2133 CAS-15-15-15 Registered Memory Kit

759934-B21

HPE 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit

726719-B21

HPE 32GB (1x32GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Registered Memory Kit

728629-B21

Load Reduced DIMMs (LRDIMMs) - E5-2600 v3 series Processors

HPE 32GB (1x32GB) Quad Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit

726722-B21

HPE 16GB (1x16GB) Dual Rank x4 DDR4-2133 CAS-15-15-15 Load Reduced Memory Kit

726720-B21

M.2

HPE XL170r/190r NGFF Riser for M2SATA Kit

798190-B21

HPE XL1x0r Gen9 New Generation Form Factor 240GB (2x120GB) Riser Drive

844540-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2609v4 (1.7GHz/8-core/20MB/85W) Processor Kit 850288-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-2637v4 (3.5GHz/4-core/15MB/135W) Processor Kit 850298-B21

HPE Memory

HPE XL1x0r Gen9 Intel® Xeon® E5-2660v4 (2.0GHz/14-

HPE XL1x0r Gen9 Intel® Xeon® E5-2695v4 (2.1GHz/18-

850308-B21

850320-B21

Kit 850312-B21

HPE XL1x0r Gen9 Intel® Xeon® E5-1680v3 (3.2GHz/4-core/20MB/140W) Processor Kit

to prevent potential performance drop (CPU throttling), the max. working temperature

Page 21

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Information

– Factory Integrated Models

Page 21

HPE Hard Drives

Hot Plug SFF Drives

enclosure

HPE 3.84TB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive

816929-B21

HPE 3.84TB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive

816929-B21

HPE 3.84TB 6G SATA Read Intensive-3 SFF 2.5-in SC 3yr Wty Solid State Drive

816929-B21

HPE 480GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive

816985-B21

HPE 960GB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive

816995-B21

HPE 1.92TB 6G SATA Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive

817011-B21

HPE 80GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804575-B21

HPE 120GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804581-B21

HPE 240GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804587-B21

HPE 480GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804593-B21

HPE 800GB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804599-B21

HPE 1.6TB 6G SATA Read Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804605-B21

HPE 200GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804613-B21

HPE 800GB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804625-B21

HPE 1.6TB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive

762263-B21

HPE 1.6TB 6G SATA Mixed Use-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804631-B21

HPE 480GB 6G SATA Mixed Use-2 LFF 3.5-in SCC 3yr Wty Solid State Drive

832417-B21

HPE 200GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804639-B21

HPE 400GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804665-B21

HPE 800GB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804671-B21

HPE 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

759210-B21

HPE 1.2TB 6G SATA Write Intensive-2 SFF 2.5-in SC 3yr Wty Solid State Drive

804677-B21

HPE 1.6TB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive

762263-B21

HPE 800GB 12G SAS Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty Solid State Drive

762261-B21

HPE 600GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

759212-B21

HPE 450GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

759210-B21

HPE 300GB 12G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

759208-B21

HPE 400GB 12G SAS Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive

822555-B21

HPE 3.2TB 12G SAS Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive

822567-B21

HPE 3.2TB 12G SAS Mixed Use-3 SFF 2.5-in SC 3yr Wty Solid State Drive

822567-B21

HPE Small Form Factor Hard Drive Blank Kit

666987-B21

NOTE: User may select any combination of SAS or SATA Hard Drives. However, if RAID is selected and both SAS and SATA Hard Drives have been selected, then only the SAS Drives will be used in the RAID set.

NOTE: If B140i is the primary controller, user can only select SATA drives. NOTE: Can't select HDD when customers oder standalone XL1x0 node without r2x00

Page 22

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Information

– Factory Integrated Models

Page 22

HPE 1.2TB 6G SAS 10K rpm SFF (2.5-inch) SC Dual Port Enterprise 3yr Warranty Hard Drive

718162-B21

HPE 600GB 10k SAS 2.5 SC SGT Special Drive

702284-B21

HPE 400GB 6G SAS Light Endurance SFF 2.5-in SC Enterprise Light 3yr Wty Solid State Drive

767904-B21

HPE 960GB 6G SATA Light Endurance SFF 2.5-in SC Enterprise Light 3yr Wty G1 Solid State Drive

756601-B21

HPE 480GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State Drive

756657-B21

HPE 240GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State Drive

756636-B21

HPE 120GB 6G SATA Value Endurance SFF 2.5-in SC Enterprise Value 3yr Wty G1 Solid State Drive

756621-B21

HPE 240GB 6G SATA Read Intensive SFF 2.5-in SC 3yr Wty Solid State Drive

789135-B21

HPE 960GB 6G SATA Light Endurance SFF 2.5-in SC Enterprise Light 3yr Wty G1 Solid State Drive

756601-B21

HPE 300GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

652611-B21

HPE 1TB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

652749-B21

HPE 1TB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

655710-B21

HPE 900GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

652589-B21

HPE 600GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

652583-B21

HPE 500GB 6G SAS 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

652745-B21

HPE 500GB 6G SATA 7.2K rpm SFF (2.5-inch) SC Midline 1yr Warranty Hard Drive

655708-B21

HPE 450GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

652572-B21

HPE 300GB 6G SAS 10K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

652564-B21

HPE 146GB 6G SAS 15K rpm SFF (2.5-inch) SC Enterprise 3yr Warranty Hard Drive

652605-B21

HPE 960GB 6G SATA Read Intensive SFF (2.5in) SC 1yr Warranty Solid State Drive

871768-B21

HPE 1.92TB 6G SATA Read Intensive SFF (2.5in) SC 1yr Warranty Solid State Drive

871770-B21

HPE 240GB SATA 6G RI SFF SC SSD

872853-B21

HPE 480GB SATA 6G RI SFF SC SSD

872855-B21

HPE 240GB SATA 6G RI SFF SC DS SSD

868814-B21

HPE 480GB SATA 6G RI SFF SC DS SSD

868818-B21

HPE 960GB SATA 6G RI SFF SC DS SSD

868822-B21

HPE 1.92TB SATA 6G RI SFF SC DS SSD

868826-B21

HPE 3.84TB SATA 6G RI SFF SC DS SSD

868830-B21

HPE Apollo 2000 SFF Bezel Kit

838521-B21

NOTE: This bezel kit is required for P100 PCIe card

Hot Plug LFF

NOTE: User may select any combination of SAS or SATA Hard Drives.

NOTE: If B140i is the primary controller, user can only select SATA drives.

However, if RAID is selected and both SAS and SATA Hard Drives have been selected, then only the SAS Drives will be used in the RAID set.

Page 23

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Information

– Factory Integrated Models

Page 23

NOTE : Can't select HDD when customers oder standalone XL1x0 node without r2x00 enclosure

HPE Gen9 LFF HDD Spade Blank Kit

807878-B21

HPE 1.6TB 12G SAS Value Endurance LFF 3.5-in LPC Enterprise Performance 3yr Wty Solid State Drive

797301-B21

HPE 800GB 12G SAS Mainstream Endurance LFF 3.5-in LP Enterprise Midline 3yr Wty Solid State Drive

797291-B21

HPE 800GB 12G SAS Value Endurance LFF 3.5-in LPC Enterprise Performance 3yr Wty Solid State Drive

797299-B21

HPE 400GB 12G SAS Mainstream Endurance LFF 3.5-in LPC Enterprise Midline 3yr Wty Solid State Drive

797289-B21

HPE 600GB 12G SAS 15K rpm LFF (3.5-inch) Low Profile C Enterprise 3yr Warranty Hard Drive

797283-B21

HPE 450GB 12G SAS 15K rpm LFF (3.5-inch) Low Profile C Enterprise 3yr Warranty Hard Drive

797287-B21

HPE 300GB 12G SAS 15K rpm LFF (3.5-inch) Low Profile C Enterprise 3yr Warranty Hard Drive

797285-B21

HPE 960GB 6G SATA Light Endurance LFF 3.5-in LPC Enterprise Light 3yr Wty Solid State Drive

797305-B21

HPE 480GB 6G SATA Value Endurance LFF 3.5-in LPC Enterprise Value 3yr Wty Solid State Drive

797303-B21

HPE 960GB 6G SATA Mixed Use-3 LFF 3.5-in LPC 3yr Wty Solid State Drive

832433-B21

HPE 480GB 6G SATA Read Intensive-2 LFF 3.5-in LPC 3yr Wty Solid State Drive

840987-B21

HPE 800GB 6G SATA Read Intensive-2 LFF 3.5-in LPC 3yr Wty Solid State Drive

840990-B21

HPE 1.6TB 6G SATA Read Intensive-2 LFF 3.5-in LPC 3yr Wty Solid State Drive

840993-B21

HPE 4TB 6G SATA 7.2K rpm LFF (3.5-inch) 512e Low Profile Midline 1yr Warranty Hard Drive

846783-B21

HPE 6TB 6G SATA 7.2K rpm LFF (3.5-inch) 512e Low Profile Midline 1yr Warranty Hard Drive

846785-B21

HPE 1.6TB 6G SATA Mixed Use-2 LFF 3.5-in LPC 3yr Wty Solid State Drive

846788-B21

HPE 4TB 12G SAS 7.2K rpm LFF (3.5-inch) 512e Low Profile Midline 1yr Warranty Hard Drive

846996-B21

HPE 6TB 12G SAS 7.2K rpm LFF (3.5-inch) 512e Low Profile Midline 1yr Warranty Hard Drive

846998-B21

HPE 8TB 6G SATA 7.2K rpm LFF (3.5in) 512e LP Midline 1yr Warranty Hard Drive

834028-B21

HPE 8TB 12G SAS 7.2K rpm LFF (3.5in) 512e LP Midline 1yr Warranty Hard Drive

834031-B21

HPE 6TB 6G SAS 7.2K rpm LFF (3.5-inch) Low Profile Midline 1yr Warranty Hard Drive

797263-B21

HPE 4TB 6G SAS 7.2K rpm LFF (3.5-inch) Low Profile Midline 1yr Warranty Hard Drive

797267-B21

HPE 3TB 6G SAS 7.2K rpm LFF (3.5-inch) Low Profile Midline 1yr Warranty Hard Drive

797277-B21

HPE 2TB 6G SAS 7.2K rpm LFF (3.5-inch) Low Profile Midline 1yr Warranty Hard Drive

797279-B21

HPE 1TB 6G SAS 7.2K rpm LFF (3.5-inch) Low Profile Midline 1yr Warranty Hard Drive

797281-B21

HPE 6TB 6G SATA 7.2K rpm LFF (3.5-inch) Low Profile Midline 1yr Warranty Hard Drive

797269-B21

HPE 4TB 6G SATA 7.2K rpm LFF (3.5-inch) Low Profile Midline 1yr Warranty Hard Drive

797265-B21

HPE 3TB 6G SATA 7.2K rpm LFF (3.5-inch) Low Profile Midline 1yr Warranty Hard Drive

797271-B21

Page 24

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Information

– Factory Integrated Models

Page 24

HPE 2TB 6G SATA 7.2K rpm LFF (3.5-inch) Low Profile Midline 1yr Warranty Hard Drive

797273-B21

HPE 1TB 6G SATA 7.2K rpm LFF (3.5-inch) Low Profile Midline 1yr Warranty Hard Drive

797275-B21

HPE 10TB 12G SAS 7.2K rpm LFF (3.5in) 512e Low Profile Midline 1yr Warranty Hard

HPE 8TB 12G SAS 7.2K rpm LFF (3.5in) 512e Low Profile Midline 1yr Warranty Hard Drive

861592-B21

HPE 6TB 6G SATA 7.2K rpm LFF (3.5in) Low Profile Midline 1yr Warranty Hard Drive

846512-B21

HPE 6TB 12G SAS 7.2K rpm LFF (3.5in) Low Profile Midline 1yr Warranty Hard Drive

846516-B21

HPE 480GB SATA 6G RI LFF Lpc DS SSD

869056-B21

HPE 1.92TB SATA 6G RI LFF Lpc DS SSD

869058-B21

HPE Apollo 2000 LFF Bezel Kit

838518-B21

NOTE: This bezel kit is required for P100 PCIe card

USB Flash Kit

741279-B21

737953-B21

HPE Networking

Ethernet Options

FlexibleLOM Adapters

HPE Ethernet 10Gb 2-port 562SFP+ Adapter

727055-B21

HPE Ethernet 10Gb 2-port 562FLR-SFP+ Adapter

727054-B21

HPE Ethernet 1Gb 4-port 331FLR Adapter

629135-B21

HPE Ethernet 1Gb 4-port 366FLR Adapter

665240-B21

HPE Ethernet 10Gb 2-port 560FLR-SFP+ Adapter

665243-B21

HPE FlexFabric 10Gb 4-port 536FLR-T Adapter

764302-B21

HPE FlexFabric 10Gb 2-port 556FLR-T Adapter

794525-B21

HPE FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter

700751-B21

HPE FlexFabric 10Gb 2-port 533FLR-T Adapter

700759-B21

HPE FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter

727060-B21

HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter

779799-B21

HPE StoreFabric CN1200E 10GBASE-T Dual Port Converged Network Adapter

N3U51A

HPE StoreFabric CN1100R 10GBASE-T Dual Port Converged Network Adapter

N3U52A

InfiniBand Options

QLogic InfiniBand 4X QDR PCI-E G2 Dual Port HCA

583211-B21

HPE InfiniBand FDR 2-port 545QSFP Adapter

702211-B21

HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+QSFP Adapter

764284-B21

HPE InfiniBand FDR 2-port 545FLR-QSFP Adapter

702212-B21

HPE InfiniBand FDR/Ethernet 10Gb/40Gb 2-port 544+FLR-QSFP Adapter

764285-B21

HPE InfiniBand QDR/Ethernet 10Gb 2-port 544+FLR-QSFP Adapter

764286-B21

HPE 100Gb 1-port OP101 QSFP28 x16 PCIe Gen3 with Intel® Omni-Path Architecture Adapter

829335-B21

Riser Options

HPE XL170r/190r Low Profile PCI-E x16 Left Riser Kit

798178-B21

Drive 857646-B21

HP Dual 8GB microSD EM USB Kit

HP 8GB USB EM Flash Media Kit

Page 25

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Information

Page 25

HPE XL190r Low Profile x16 FlexibleLOM x8 Right Riser Kit

798184-B21

HPE XL190r Gen9 GPU Direct Attach Re-timer Right Riser Kit

827353-B21

HPE XL190r x16x16x16 11OS Right Riser Kit

798186-B21

HPE XL190r x16x16x16 Graphics Processing Unit Direct Right Riser Kit

798188-B21

HPE XL190r Low Profile PCIex16 Left Riser Kit

800293-B21

HPE XL190r Gen9 Enhanced 11OS Right Riser Kit

852767-B21

HPE XL190r Gen9 Enhanced GD Right Riser Kit

852769-B21

Graphic Card

HPE XL190r Intel® GPU Enablement Cable Kit

800809-B21

HPE XL190r K40 Enablement Cable Kit

800807-B21

HPE NVIDIA GRID K2 Reverse Air Flow GPU PCIe FIO Enablement Kit

842509-B21

HPE XL190r Gen9 AMD GPU Enablement Kit

827357-B21

HPE XL190r Single K80 GPU Adapter Kit

802852-B21

HPE XL190r Gen9 Dual K80/M60 Graphics Processing Unit Adapter Kit

802855-B21

HPE XL190r Gen9 2x3 Dual Graphics Processing Unit Adapter Kit

798196-B21

HPE XL190r Gen9 2x3 2x4 Single Graphics Processing Unit Adapter Kit

798203-B21

HPE NVIDIA Quadro K4200 Graphics Accelerator

J0G90A

NVIDIA Tesla K40 12 GB Computational Accelerator

F1R08A

HPE NVIDIA Tesla K80 Dual GPU PCIe Computational Accelerator

J0G95A

HPE NVIDIA Tesla P100 PCIe 16GB Computational Accelerator

Q0E21A

HPE AMD FirePro S9150 Accelerator Kit

J0H11A

NOTE: the following table summaries the configuration options for risers associated with the GPU cards.

HPE

Adptr

HPE

Module

HPE Intel

HPE

HPE AMD

HPE

J0G90A

J0G95A

C1P87A

F1R08A

J0H11A

753958‐B2

M3X67A

HPE XL190r Gen9 NVIDIA

HPE XL190r Gen9 AMD

HPE XL190r Gen9 Intel GPU

Options

– Factory Integrated Models

NVIDIA Quadro

K4200

PCIe

K2 RAF Enable Kit (842509-B21)

Graphics

GPU Enablement Kit (827357-B21)

NVIDIA

Tesla

K80 Dual GPU

Xeon Phi

5110P

Coprocesso

r Kit

NVIDIA

Tesla

K40 12

Module

S9150

Accelerator

Kit

Enablement Kit (800809-B21)

NVIDIA GRID K2RAF PCIe

GPU Kit

NVIDIA

Grid M60-

RAF Dual

GPU

Module

Page 26

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Information

– Factory Integrated Models

Page 26

HPE XL190r Gen9 K40

HPE XL190r Gen9 Dul

HPE XL190r Gen9 Single

(798203-B21)

HPE XL190r Gen9 Dual GPU

(798196-B21)

HPE FLOM 2U node Riser

HPE 11OS Riser kit

HPE GD Riser kit

NOTE: Please see the QuickSpecs for Technical Specifications and additional

http://www8.hp.com/h20195/v2/gethtml.aspx?docname=c04168349

HPE Rack Options

631341-B21

745823-B21

HPE Insight Software

E6U59ABE

E6U64ABE

BD776AAE

BD777A

BD778A

BD778AAE

BD779A

BD505A

BD506A

BD506AAE

BD507A

512485-B21

Enablement Kit (800807-B21)

K80/M60 GPU Adptr Kit (802855-B21)

GPU Adptr Kit

Adptr Kit

(798184-B21)

(198184-B21)

(798188-B21)

information:

HPE USB BFR with PVC Free Keyboard/Mouse Kit

HPE USB BFR with PVC Free US Keyboard/Mouse Kit

HPE Trusted Platform Module 2.0 Kit

Integrated Lights-Out (iLO)

HPE iLO Scale Out

HPE iLO Advanced including 1yr 24x7 Technical Support and Updates E-LTU

HPE iLO Advanced including 3yr 24x7 Technical Support and Updates E-LTU

HPE iLO Scale-Out including 3yr 24x7 Tech Support and Updates Flex Qty E-LTU

HPE iLO Scale-Out including 3yr 24x7 Tech Support and Updates Tracking LTU

HPE iLO Scale-Out 1yr 24x7 Tech Support and Updates Flexible Quantity LTU

HPE Integrated Lights-Out (iLO) Advanced for ProLiant

HPE iLO Scale-Out including 1yr 24x7 Tech Support and Updates Flex Qty E-LTU

HPE iLO Scale-Out including 1yr 24x7 Tech Support and Updates Tracking LTU

HPE iLO Advanced including 3yr 24x7 Tech Support and Updates 1-server LTU

HPE iLO Advanced including 3yr 24x7 Tech Support and Updates Flexible Quantity LTU

HPE iLO Advanced Electronic License with 3yr 24x7 Tech Support and Updates

HPE iLO Advanced including 3yr 24x7 Tech Support and Updates Tracking LTU

HPE iLO Advanced including 1yr 24x7 Technical Support and Updates 1-server LTU

Page 27

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Information

– Factory Integrated Models

Page 27

HPE iLO Advanced including 1yr 24x7 Technical Support and Updates Flexible Quantity LTU

512486-B21 512487-B21

HPE iLO Advanced including 1yr 24x7 Technical Support and Updates Electronic License

TA850AAE

NOTE: For additional license options please see the QuickSpecs at:

https://www.hpe.com/h20195/v2/gethtml.aspx?docname=c04154343

NOTE: For more information, visit: http://www.hp.com/go/ilo

HPE Memory

For detailed memory configuration rules and guidelines, please use the Online DDR4 Memory Configuration Tool:

http://h22

Memory Subsystem Architecture Each Intel® Xeon® E5-2600 v3 family processor socket contains four memory channels that support two DIMMs each for a total of eight (8) DIMM per installed processor or a grand total of s supported for 512GB of memory (16 DIMM slots x 32GB per DIMM).

Memory Population Rules and Guidelines:

Supported Memory Bandwidth on Intel® Xeon® E5-2600 v3 series Processors

DIMM Rank

Single Rank (1R)

Dual Rank (2R)

Quad Rank (4R)

DIMM Capacity

8GB

16GB

32GB

Voltage

Std Voltage 1.2V

SLOTS THAT CAN BE POPULATED

16 slots

MAXIMUM CAPACITY (GB)*

16 slots

128

256

512

POPULATED DIMM SPEED (MT/s)

1 DIMM Per Channel

2133

HPE iLO Advanced including 1yr 24x7 Technical Support and Updates Tracking LTU

195.www2.hpe.com/MemoryTool/Home/Legal

ixteen (16) DIMMs for the server. Up to 32GB capacity DIMMs are

• White DIMM slots denote the first slot of a channel. For 1 DPC (DIMM per channel) populate white slots only.

• Install DIMMs only if the corresponding processor is installed.

• There are two channels per processor with two DIMM slots per channel.

• Memory channel A consists of the two (2) DIMMs that are closest to the processor.

• Memory channel B consists of the two (2) DIMMs that are furthest from the processor.

• Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel

• Heaviest load (DIMM with most ranks) within a channel goes furthest from the processor

• No support for RDIMMs; Non-ECC UDIMMs

• DIMMs of different speeds may be mixed in any order; the server will select a common optimal speed.

• The maximum memory speed is a function of the memory type, memory configuration, and processor model.

• The maximum memory capacity is a function of the memory type and number of installed processors.

• To realize the performance memory capabilities listed in this document, HPE SmartMemory is required. For additional

information, please see the HPE SmartMemory QuickSpecs at:

• https://www.hpe.com/h20195/v2/gethtml.aspx?docname=c04111535

• For memory population rules and additional memory guidelines, please see the HPE ProLiant XL230 Gen9 user guide at

http://www.hpe.com/support

Load Reduced (LRDIMMs)

Page 28

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Information

– Factory Integrated Models

Page 28

2 DIMM Per Channel

2133

*Maximum Capacity will vary based on individual serve platform qualification schedule

Supported Memory Bandwidth on Intel® Xeon® E5-2600 v4 series Processors

DIMM Rank

Single Rank (1R)

Dual Rank (2R)

Quad Rank (4R)

DIMM Capacity

16GB

32GB

Voltage

Std Voltage 1.2V

SLOTS THAT CAN BE POPULATED

16 slots

MAXIMUM CAPACITY (GB)*

16 slots

256

512

POPULATED DIMM SPEED (MT/s)

1 DIMM Per Channel

2400

2 DIMM Per Channel

2133

*Maximum Capacity will vary based on individual serve platform qualification schedule

Memory Speed by E5-2600 v3 Series Processor Model

Processor Models (please based on processor model Mission Bay offer to update below SKUs)

Supported Memory

Speeds

E5-2690 v3, E5-2695 v3, E5-2697 v3, E5-2698 v3, E5-2699 v3, E5-2687W v3, E5-2683 v3, E52680 v3, E5-2670 v3, E5-2667 v3 , E5-2660 v3, E5-2650 v3, E5-2650L, E5-2643 v3, E5-2637 v3

2133MHz

E5-2640 v3, E5-2630 v3, E5-2630L v3, E5-2623 v3, E5-2620 v3

1866MHz

E5-2609 v3, E5-2603 v3

1600MHz

Memory Speed by E5-2600 v4 Series Processor Model

Processor Models (please based on processor model Mission Bay offer to update below SKUs)

Supported Memory

Speeds

E5-2643 v4, E5-2650Lv4, E5-2650 v4, E5-2660 v4, E5-2667 v4, E5-2680 v4, E5-2683 v4, E5-2690 v4, E5-2695 v4 , E5-2697 v4, E5-2698 v4, E5-2699v4, E5-2637 v4.

2400MHz

E5-2620 v4, E5-2623 v4, E5-2630L v4, E5-2630 v4, E5-2637 v4, E5-2640 v4

2133MHz

E5-2603 v4, E5-2609 v4

1866MHz

Load Reduced (LRDIMMs)

Supported Memory Bandwidth on Intel® Xeon® E5-2600 v4 series Processors

Page 29

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Configuration Information

Page 29

NOTE: Capacity references are rounded to the common gigabyte (GB) values.

• 2GB = 2,048MB

• 4GB = 4,096MB

• 8GB = 8,192MB

• 16GB = 16,384MB

• 32GB = 32,768MB

– Factory Integrated Models

Memory options part number decoder

Item Description Definition

1 Capacity 8 GByte / 16 GByte / 32 GByte

2 Rank 1R=Single-rank / 2R = Dual-rank / 4R Quad-rank

3 Data Width x4 = 4-bit / x8 =-bit

4 Memory Generation DDR4

5 Max. Memory Speed 2133MT/s

6 CasLatency P=15

6 DIMM type R= RDIMM (registered)

L= LRDIMM (registered)

Page 30

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Technical Specifications

Page 30

System Unit

Server Dimensions (L x W x D)

1.63 x 7.07 x 25.26 in (4.13 x 17.95 x 64.15 cm)

Weight

Maximum

installed)

14.27 lb (6.47 kg)

System Inlet Temperature

Standard Operating

System performance during standard operating

to be: 5° to

fault.

Non-operating

-30° to 60°C (-22° to 140°F). Maximum rate of change is 20°C/hr (36°F/hr).

Relative Humidity

Operating

Minimum to be the higher (more moisture) of -12°C (10.4°F) dew point or 8% relative humidity. Maximum

point or 90% relative humidity.

Non-operating

5 to 95% relative humidity (Rh), 38.7°C (101.7°F) maximum wet bulb temperature, non-condensing.

Altitude

Operating

3050 m (10,000 ft). This value may be limited by the

ft/min).

Acoustic Noise

Listed are the declared A-Weighted sound power levels (LWAd) and

result in increased sound levels.

Emissions Classification

FCC Rating

Class A

Normative Standards

CISPR 22; EN55022; EN55024; FCC CFR 47, Pt 15;

(approximate)

(four hard drives and two processors

Support

Extended Ambient Operating Support

support may be reduced if operating with a fan fault or above 30°C (86°F). For approved hardware configurations, the supported system inlet range is extended 10°C (41° to 50°F) and 35° to 40°C (95° to 104°F) at sea level with an altitude derating of 1.0°C per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft). The approved hardware configurations for this system are listed at the URL:

http://www.hp.com/servers/ASHRAE

For approved hardware configurations, the supported system inlet range is extended to be: 40° to 45°C (104° to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per every 410 ft) above 900 m (2953 ft) to a maximum of 3050 m (10,000 ft). The approved hardware configurations for this system are listed at the URL:

http://www.hp.com/servers/ASHRAE

System performance may be reduced if operating in the extended ambient operating range or with a fan

(non-condensing)

measured average bystander position A-Weighted sound pressure levels (LpAm) when the product is operating in a 23°C ambient environment. Noise emissions were measured in accordance with ISO 7779 (ECMA 74) and declared in accordance with ISO 9296 (ECMA 109). The listed sound levels apply to standard shipping configurations. Additional options may

(EMC)

to be the lower (less moisture) of 24°C (75.2°F) dew

type and number of options installed. Maximum allowable altitude change rate is 457 m/min (1500

ICES-003; CNS13438; GB9254; K22;K24; EN

Page 31

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Technical Specifications

61000-3-2; EN 61000-3-3; EN 60950-1; IEC 60950-1

NOTE: Product conformance to cited product specifications is based on

statements.

Acoustic Noise

SL2000 Gen 9 Configuration

Configuration

Entry

Typical

Performance

Others

CPU type and qty

HPE XL1x0r

2630v3 Kit x 1

HPE XL1x0r

2630v3 Kit x1

HPE XL1x0r Gen9

DIMM type, capacity

HPE Z16GB 2Rx4

HPE Z16GB

2133P-R Kit x2

HPE Z16GB 2Rx4

HDD type and qty

500GB 6G SATA

HPE 450GB 12G

HPE 450GB 12G SAS

HDD Backplane

24SFF W/O

Expander

24SFF W/

Expander

24SFF W/ Expander

HD Controller for

B140i onboard

HPE Smart Array

LOM for flexibility

ALOM/BLOM

Fan type and count

8038mm x4

I/O and Others

and etc.)

Cooling Mode

Optimal Cooling

Acoustics Performance

Sound Power Level

Idle:6.6Bel

Idle:6.9 Bel

Idle:6.9;Bel

Sound Pressure

Idle:47 dBA

Idle:50 dBA

NOTE:

accordance with ISO 7779 and declared in accordance with ISO 9296. The listed sound levels apply to listed configurations. Additional options may result in increased HPE Rep refer to EMESC Website for further technical details regarding the configurations listed above.

NOTE:

evaluation, or assessment. T compliance logos and statements.

Environment-friendly

Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise product return, trade-in, and

each product type for use by treatment facilities. This information (product disassembly instructions) is

http://www.hp.com/go/green

sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and

and qty

flexible storage options

for multiple

(Mezz, GPGPU, NIC

Setting

Gen9 ZE5-

PC4-2133P-R Kit

7.2K SFF HDD x2

SATA

Gen9 ZE5-

2Rx4 PC4-

SAS 15K 2.5in x2

P440/4GB 12Gb

Controller

ZE5-2630v3 Kit x2

PC4-2133P-R Kit x4

15K 2.5in x2

P440/4GB 12Gb

Controller

in Bels LWAd

Level LpAm

OP: 6.6Bel

OP:47 dBA

OP: 6.9Bel

OP:50 dBA

The product is operating in a 23°C ambient environment. Noise emissions were measured in

Product conformance to cited product specifications is based on sample (type) testing,

his product or family of products is eligible to bear the appropriate

Products and Approach

recycling programs in many geographic areas. For trade-in information, please go to: http://www.hp.com/go/green to recycle your product, please go to: http://www.hp.com/go/green or contact your nearest Hewlett Packard Enterprise sales office. Products returned to Hewlett Packard Enterprise will be recycled, recovered or disposed of in a responsible manner. The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for

posted on the Hewlett Packard Enterprise web site at:

Page

OP: 7.1Bel

OP: 51 dBA

sound levels. Please have your

These

Page 32

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Technical Specifications

instructions may be used by recyclers and other WEEE treatment facilities as well as Hewlett Packard

Enterprise OEM customers who integrate and re-sell Hewlett Packard Enterprise equipment.

Page

Page 33

QuickSpecs

HPE ProLiant XL190r Gen9 Server

Summary of C

hanges

Page 33

Date

Version History

Action

Description of Change

16-Dec-2016

From version 12 to 13

Updated

Add the USB Flash Kits

28-Nov-2016

From version 11 to 12

Updated

Update the configuration section and correct errors.

4-Nov-2016

From version 10 to 11

Updated

Remove some HDD SKUs

15-Aug-2016

From version 9 to |0

Updated

Update the configuration and information section.

15-Jul-2016

From version 8 to 9

Updated

Update configuration and information sections

2-May-2016

From version 7 to 8

Updated

Added GPU and HDD throughout the QuickSpecs

31-Mar-2016

From version 6 to 7

Updated

Update configuration and information sections

16-Feb-2016

From version 5 to 6

Updated

Update the SATA, SDD and processors section

8-Jun-2015

From version 4 to 5

Changed

Chenge the errors on the document and update the configuration section.

1-Dec-2015

From version 3 to 4

Updated

Modified GOU and changes troughout the QuickSpecs

28-Sept-2015

From version 2 to 3

Updated

Added GPU and HDD throughout the QuickSpecs

17-Aug-2015

From version 1 to 2

Modified

Modified Riser card and updates throughout the QuickSpecs

30-Mar-2015

Version 1

Created

Create QuickSpecs for HPE ProLiant XL190r Gen9 Server

© Copyright 2016 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change without notice. The only warranties for services are set forth in the express warranty statements accompanying such products and services. Nothing he shall not be liable for technical or editorial errors or omissions contained herein.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporatio Intel, the Intel logo, Xeon and Xeon Inside are trademarks of Intel Corporation in the U.S. and other countries. Linux is a registered trademark of Linus Torvalds. SUSE is a registered trademark of Suse. Ubuntu and Canonical are registered trademark Red Hat is a trademark of Red Hat, Inc. in the U.S. and other countries. VMware is a registered trademark of VMware, Inc. in the United States and/or other jurisdictions.

For hard drives, 1GB = 1 billion bytes. Actual formatted capac

c04545619 - 15189 - WorldWide – V12 – 28-November-2016

rein should be construed as constituting an additional warranty. Hewlett Packard Enterprise

Hewlett Packard Enterprise products and

s of Canonical Ltd.

ity is less.