Page 1
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs
Overview
Overview
HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
Extended SKU - This adapter is part of an extended catalog of products tailored for customers in specific markets or with specific workloads,
requiring the utmost in performance or value, but typically have a longer lead-time.
The HPE Ethernet 10Gb 2-port 546FLR-SFP+ adapter for ProLiant rack servers are designed to optimize Cloud efficiency, and improve
performance and security of applications – especially where I/O, block storage and database performance are critical and the need for
maximum VM density and up-scalability are greatest.
It offers a rich set of offload technologies including overlay network tunneling and storage as well as RDMA over Converged Ethernet
(RoCE) capabilities that increase host efficiency and virtualization performance.
The HPE FlexFabric 546FLR-SFP+ can provide up to 40 Gb/s of converged bi-directional Ethernet bandwidth, helping to alleviate network
bottlenecks.
HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
Page 1
Page 2
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
Platform Information
Platform Information
Models
HP Ethernet10Gb 2-port 546FLR-SFP+ Adapter 779799-B21
HP Ethernet 10Gb 2-port 546FLR-SFP+ FIO Adapter 779800-B21
Kit Contents
Compatibility Supported Servers
HP FlexFabric 10Gb 2-port 556FLR-SFP+ Adapter
Quick install card
Product warranty statement
HPE ProLiant DL380 Gen9
HPE ProLiant DL360 Gen9
HPE ProLiant DL180 Gen9
HPE ProLiant DL160 Gen9
HPE ProLiant DL120 Gen9
HPE ProLIant DL80 Gen9
HPE ProLiant DL60 Gen9
HPE ProLiant DL20 Gen9
HPE ProLiant DL580 Gen9
HPE ProLiant DL560 Gen9
HPE Apollo 6000 Gen9
HPE Apollo 2000 Gen9
HPE Apollo 4500 Gen9
NOTE:
This is a list of supported servers. Some may be discontinued.
Page 2
Page 3
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
Standard Features
Standard Features
At a Glance Features
• Over eight million small packets/s, ideal for web/mobile applications, mobile messaging, and social media
• Industry-leading throughput and latency performance
• Up to 40 Gb/s bi-directional near-line rate throughput
• FlexibleLOM Adapter
• Advanced storage offload processing freeing up valuable CPU cycles
• Tunnel offload support (NVGRE, VxLAN)
• Supports UEFI and legacy boot options
• Supports receive-side scaling (RSS) for the efficient distribution of network receive processing across
multiple CPUs in multiprocessor systems
• Support for Preboot eXecution Environment (PXE)
• RDMA over Converged Ethernet (RoCE) for greater server efficiency and lower latency
• Greater bandwidth with PCIe 3.0
• Jumbo Frames support
• Includes 128MB of onboard memory
• Support for Windows SMB Direct with RoCE
• Supports VMWare NetQueue, Microsoft Virtual Machine Queue (VMQ) for Windows
• Optimized host virtualization density with SR-IOV support
• Converges RoCE with LAN traffic on a single 10 GbE wire
ThroughputTheoretical Bandwidth
802.1p QoS Tagging
802.1Q VLANs
Configuration Utilities
DPDK
Interrupt Coalescing
This adapter delivers 20 Gb/s bi-directional Ethernet transfer rate per port (40 Gb/s per adapter), providing
the network performance needed to improve response times and alleviate bottlenecks.
IEEE quality of service (QoS) 802.1p tagging allows the adapter to mark or tag frames with a priority level
across a QoS-aware network for improved traffic flow.
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of this adapter to be
separated into multiple virtual NICs for added network segmentation and enhanced security and performance.
VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same
VLAN domain also improves performance.
This adapter ships with a suite of operating system-tailored configuration utilities that allow the user to enable
initial diagnostics and configure adapter teaming. This includes a patented teaming GUI for Microsoft Windows
operating systems. Additionally, support for scripted installations of teams in a Microsoft Windows environment
allow for unattended OS installations.
This adapter supports DPDK with benefit for packet processing acceleration and use in NFV deployments.
Interrupt coalescing (interrupt moderation) groups multiple packets, thereby reducing the number of
interrupts sent to the host. This process optimizes host efficiency, leaving the CPU available for other duties.
Page 3
Page 4
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
Standard Features
Jumbo Frames
LED Indicators
Management Support
Message Signaled
Interrupt (Extended)
(MSI-X)
PCI Express Interface
Preboot eXecution
Environment (PXE)
This adapter supports Jumbo Frames (also known as extended frames), permitting up to a 9,200 byte (KB)
transmission unit (MTU) when running Ethernet I/O traffic. This is over five times the size of a standard 1500byte Ethernet frame. With Jumbo Frames, networks can achieve higher throughput performance and greater
CPU utilization. These attributes are particularly useful for database transfer and tape backup operations.
LED indicators show link integrity and network activity for easy troubleshooting.
This adapter ships with agents that can be managed from HPE Systems Insight Manager or other management
application that support SNMP.
Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers by load balancing
interrupts between CPUs/cores.
This adapter is designed with an eight lane (x8) PCI Express bus based on the PCIe 3.0 standard. The adapter
is backward compatible with four lane (x4) PCI Express, automatically auto-sensing between x8 and x4 slots.
Support for PXE enables automatic deployment of computing resources remotely from anywhere. It allows a
new or existing server to boot over the network and download software, including the operating system, from a
management/ deployment server at another location on the network.Additionally, PXE enables decentralized
software distribution and remote troubleshooting and repairs.
RoCE
Server Integration
TCP/UDP/IP
RoCE is an accelerated I/O delivery mechanism that allows data to be transferred directly from the user
memory of the source server to the user memory of the destination server bypassing the operating system
(OS) kernel. Because the RDMA data transfer is performed by the DMA engine on the adapter's network
processor, the CPU is not used for the data movement, freeing it to perform other tasks such as hosting more
virtual workloads (increased VM density). RDMA also bypasses the host's TCP/IP stack, in favor of upper layer
InfiniBand protocols implemented in the adapter's network processor. The bypass of the TCP/IP stack and the
removal of a data copy step reduce overall latency to deliver accelerated performance for applications such as
Microsoft Hyper-V Live Migration, Microsoft SQL and Microsoft SharePoint with SMB Direct.
This adapter is a validated, tested, and qualified solution that is optimized for HPE ProLiant servers. Hewlett
Packard Enterprise validates a wide variety of major operating systems drivers with the full suite of web-based
enterprise management utilities including HPE Intelligent Provisioning and HPE Systems Insight Manager that
simplify network management.
This approach provides a more robust and reliable networking solution than offerings from other vendors and
provides users with a single point of contact for both their servers and their network adapters.
For overall improved system response, this adapter supports standard TCP/IP offloading techniques including:
Page 4
Page 5
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
Standard Features
TCP/IP, UDP checksum offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network
adapter. Large send offload (LSO) or TCP segmentation offload (TSO) allows the TCP segmentation to be
handled by the adapter rather than the CPU.
Tunnel Offload
Warranty
Minimize the impact of overlay networking on host performance with tunnel offload support for VXLAN
and NVGRE. By offloading packet processing to adapters, customers can use overlay networking to increase
VM migration flexibility and virtualized overlay networks with minimal impact to performance. HPE Tunnel
Offloading increases I/O throughput, reduces CPU utilization, and lowers power consumption. Tunnel Offload
supports VMware's VXLAN and Microsoft's NVGRE solutions.
Maximum: The remaining warranty of the HPE product in which it is installed (to a maximum three-year, limited
warranty).
Minimum: One year limited warranty.
NOTE:
Additional information regarding worldwide limited warranty and technical
support is available at: http://h17007.www1.hpe.com/us/en/enterprise/servers/warranty/
index.aspx#.V4e3tPkrJhE
Page 5
Page 6
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
Service and Support
Service and Support
Service and Support NOTE:
Most HPE branded options sourced from HPE that are compatible with your product will be covered under
your main product support at the same level of coverage, allowing you to upgrade freely. Additional support is
required on select workload accelerators, switches, racks and UPS options 12KVA and over. Coverage of the
UPS battery is not included under HPE support services; standard warranty terms and conditions apply.
This adapter is covered under HPE Support Services/ Service Contract applied to the HPE
ProLiant Server or enclosure. No separate HPE Support Services need to be purchased.
Warranty and Support
Services
Protect your business
beyond warranty with
HPE Support Services
Parts and Materials
Warranty and Support Services will extend to include HPE options configured with your server or storage
device. The price of support service is not impacted by configuration details. HPE sourced options that are
compatible with your product will be covered under your server support at the same level of coverage allowing
you to upgrade freely. Installation for HPE options is available as needed. To keep support costs low for
everyone, some high value options will require additional support. Additional support is only required on select
high value workload accelerators, fibre switches, InfiniBand and UPS options 12KVA and over. Coverage of the
UPS battery is not included under TS support services; standard warranty terms and conditions apply.
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and stability.
Connect to HPE to help prevent problems and solve issues faster. HPE Support Services enable you to choose
the right service level, length of coverage and response time as you purchase your new server, giving you full
entitlement to the support you need for your IT and business.
Protect your product, beyond warranty.
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the covered hardware product in operating condition, including parts and materials for available
and recommended engineering improvements. Parts and components that have reached their maximum
supported lifetime and/or the maximum usage limitations as set forth in the manufacturer's operating manual,
product quick-specs, or the technical product data sheet will not be provided, repaired, or replaced as part of
these services. The defective media retention service feature option applies only to Disk or eligible SSD/Flash
Drives replaced by Hewlett Packard Enterprise due to malfunction.
For more information
Visit the Hewlett Packard Enterprise Service and Support website.
Page 6
Page 7
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
Related Options
Related Options
Cables - Direct Attach
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 0.5m Direct Attach Copper Cable 487649-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 1m Direct Attach Copper Cable 487652-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 3m Direct Attach Copper Cable 487655-B21
HP BladeSystem c-Class 10GbE SFP+ to SFP+ 5m Direct Attach Copper Cable 537963-B21
HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable JD095C
HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable JD096C
HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable JD097C
HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable JG081C
HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable JC784C
NOTE:
Direct Attach Cable (DAC) must be purchased separately for copper environments.
Cables - Fiber Optic
Transceivers
HP LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable AJ833A
HP LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable AJ834A
HP LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable AJ836A
HP LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable AJ837A
HP LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable AJ838A
HP LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable AJ839A
NOTE:
Fiber transceivers and cables must be purchased separately for fiber-optic environments.
HP BladeSystem c-Class 10Gb SFP+ SR Transceiver 455883-B21
NOTE:
Fiber transceivers and cables must be purchased separately for fiber-optic environments.
Page 7
Page 8
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
Technical Specifications
Technical Specifications
General Specifications
Network Processor Mellanox Connect X-3 Pro
Data Rate Two ports, each at 20 Gb/s bi-directional; 40 Gb/s aggregate bi-directional
theoretical bandwidth.
Onboard Memory 128 MB
Bus type PCI Express 3.0 (Gen 3) x8
Form Factor FlexibleLOM
IEEE Compliance 802.3ae, 802.1Q, 802.3x, 802.1p, 802.3ad/LACP, 802.1AB(LLDP),
802.1Qbg, 802.1Qbb, 802.1Qaz
Power and
Environmental
Specifications
Operating System and
Virtualization Support
Environmentfriendly Products and
Approach - End-oflife Management and
Recycling
Power 9.7 W maximum
Temperature - Operating 0° to 55°C (32° to 131°F)
Temperature - Non-Operating -40° to 70° C (-40° to 158° F)
Humidity - Operating 15% to 80% non-condensing
Humidity - Non-operating 0% to 90% non-condensing
Emissions Classification FCC Class A, VCCI Class A, BSMI Class A, CISPR 22 Class A, ACA Class A,
EN55022 Class A, EN55024-1, ICES-003 Class A, MIC Class A
RoHS Compliance 6 of 6
Safety UL Mark (USA and Canada)
CE Mark
EN 60590-1
Other PCIe 3.0
IPv4, IPv6
CE
ACPI 1.1a
Microsoft WHQL (Windows Hardware Quality Labs)
Server Design Guide version 3.0 (SDG 3.0)
The Operating Systems supported by this adapter are based on the server OS support. Please refer to the OS
Support Matrix at https://www.hpe.com/us/en/servers/server-operating-systems.html.
Hewlett Packard Enterprise offers end-of-life product return, trade-in, and recycling programs, in many
geographic areas, for our products. Products returned to Hewlett Packard Enterprise will be recycled, recovered
or disposed of in a responsible manner.
The EU WEEE Directive (2012/19/EU) requires manufacturers to provide treatment information for each
product type for use by treatment facilities. This information (product disassembly instructions) is posted on
the Hewlett Packard Enterprise web site. These instructions may be used by recyclers and other WEEE
treatment facilities as well as Hewlett Packard Enterprise OEM customers who integrate and re-sell Hewlett
Packard Enterprise equipment.
Page 8
Page 9
RETIRED: Retired products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may
have older product names and model numbers that differ from current models.
QuickSpecs HPE Ethernet 10Gb 2-port 546FLR-SFP+ Adapter
Summary of Changes
Summary of Changes
Date Version History Action Description of Change
05-Feb-2018 Version 5 Changed Overview was updated
23-Oct-2017 Version 4 Changed Technical specifications - operating system, Service and Support and Part
and Materials sections were updated.
21-Oct-2016 Version 3 Changed Add DPDK support and update servers.
10-Apr-2015 Version 2 Changed Changes were made to Standard Features section.
30-Mar-2015 Version 1 New Initial Version.
Sign up for updates
©
Copyright 2018 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change
without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained
herein.
c04543737 - 15183 - Worldwide - V5 -05-February-2018
Loading...