C4708-60117Code ROM SIMM (Revision M.01.12 firmware) - Plugs into socket on the main logic board
Front Panel
46
C3195-60038Front (Control) panel and cable assembly - Includes function buttons and display
Motor
47
C3195-60009Bail stepper motor - Used to drive the bail assembly
PC Board
48
C4708-69001Main logic board - Includes integrated RS232-C (Serial) and bi-tronics/centronics (Parallel) interface ports
REQUIRES RETURN OF DEFECTIVE PART
C4708-60001New Part for C4708-69001
Power Cord
8120-0698Power cord (Black) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 220V/240V in the USA and Canada)
8120-1351Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V in the UK, Hong Kong,
Singapore, Malaysia, and Brunei)
8120-1369Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 240V in Australia, New Zealand,
and China)
8120-1378Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in USA, Canada, Latin
America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)
8120-1689Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh,
Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
8120-2104Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Switzerland)
8120-2956Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Denmark)
8120-4211Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 240V in South Africa and India)
Power Supply
57
0950-2623Switching power supply (Delta DPS-158ABA) - 100-240VAC input, 47-63Hz - Four DC outputs (5.15V, +12V, -12V,
24V), 158 watts
Sensor
58
C2858-60007Optical primer sensor - Used to determine initial position of the primer assembly cam
59
C3195-60015Sensor assembly (for lift-up window)
Wiring Harness
60
C3195-60149AC wiring harness - Includes power switch, AC receptacle, and connector
External Case Parts
Bin
61
C4705-60097Media bin - Wire rack that mounts to the plotter stand legs and cross brace
Cover
62
C1633-00031MIO slot access cover
63
C3195-00009SIMM slot access cover - Metal cover that mounts to the back cover/panel on the electronic enclosure assembly
64
C3195-60039Cover assembly - Metal center cover that lift-up viewing window mounts to - Includes 'T' shaped latches and mounting
screws
65
C3195-60053Back cover/panel - Metal cover for the electronic enclosure assembly
NO LONGER SUPPLIED
66
C4705-60088Unicover assembly - Plastic cover which is used in place of the center cover, electrical cover assembly, SIMM cover,
and SIMM barrier
67
C4705-60106Left end cover
68
C4705-60114Right end cover - Has cut outs for the control panel buttons lights and display - Does NOT include an overlay
J3258BExternal JetDirect 170X LAN interface module - Interfaces a parallel printer to an ethernet 10Base-T (RJ-45) LAN
96
J3264AExternal JetDirect 500X token ring interface module - Interfaces up to 3 parallel printers to a token ring (DB-9 or RJ-45)
LAN
97
J3265AExternal JetDirect 500X LAN interface module - Interfaces up to 3 parallel printers to an ethernet 10Base-T (RJ-45),
10Base2 (BNC), or 100Base-TX (RJ-45) LAN
Module
98
J2382-69003External JetDirect LAN interface module with ethertwist (10Base-T) and ThinLAN (10BASE-2) connectors
99
J2383-61005External token ring interface module - Has DB-9 connector
100
J2590-69001External JetDirect LAN interface module with RJ-45 connector for ethertwist (10Base-T) or 100VG/802.12 input and 3
parallel (DB-25) output connectors
REQUIRES RETURN OF DEFECTIVE PART
J2590-61011New Part for J2590-69001
101
J2591-69001External JetDirect LAN interface module with ethertwist (10Base-T) and ThinLAN (10BASE-2) connectors
102
J2592-69001External JetDirect LAN interface module with ethertwist (10Base-T) connector
REQUIRES RETURN OF DEFECTIVE PART
J2592-61001New Part for J2592-69001
103
J2593-69001External JetDirect LAN interface module with Ethertwist (10Base-T) and ThinLAN (10BASE-2) input connectors and 3
parallel (DB-25) output connectors - (part of J2593A)
104
J2594-69001External JetDirect token ring interface module with DB-9 and RJ-45 input connectors and 3 parallel (DB-25) output
connectors - (part of J2594A)
REQUIRES RETURN OF DEFECTIVE PART
J2594-61011New Part for J2594-69001
105
J3258-61011External JetDirect LAN interface module with EtherTwist (10Base-T) connector - (J3258A, J3258B)
106
J4102-69011External JetDirect LAN interface module with EtherTwist (10Base-T) connector - (J4102A, J4102B)
REQUIRES RETURN OF DEFECTIVE PART
J4102-61011New Part for J4102-69011
Module (Product)
107
J4101BExternal JetDirect LAN interface module with EtherTwist (10Base-T/Base-TX) connector
108
J4102BExternal JetDirect LAN interface module with EtherTwist (10Base-T) connector
PC Board (Interface)
109
J2550-69013EtherTwist 10Base-T LAN interface board
110
J2552-69013LAN and LocalTalk interface - EtherTwist (10Base-T), ThinLAN (10Base-2), and LocalTalk (DIN-8) connectors
111
J2555-69013Token ring LAN interface board - DB-9 and RJ-45 connectors
Power Cord
8120-1351Power cord (Mint Gray) - 17 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 240V in the UK, Hong Kong,
Singapore, Malaysia, and Brunei)
8120-1369Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 240V in Australia, New Zealand,
and China)
8120-1378Power cord (Jade Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 120V in USA, Canada, Latin
America, Korea, Taiwan, Thailand, Spain, Brazil, and Vietnam)
8120-1689Power cord (Mint Gray) - 17 AWG, 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Europe, Bangladesh,
Indonesia, Pakistan, Burma, Sri Lanka, and Vietnam)
8120-2104Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Switzerland)
8120-2956Power cord (Mint Gray) - 2.0m (6.6ft) long - Has straight (F) receptacle (For 220V in Denmark)
8120-4753Power cord (Flint Gray) - 18 AWG, 2.3m (7.5ft) long - Has straight (F) receptacle (For 100V in Japan)
8120-6302'Daisy chain' power cord (Dove Gray) - 18 AWG, 1.2m (4.0ft) long - Has C14 (M) plug for power input and C13 (F) plug
0950-2372Power supply module - 100-240VAC input, 47-63Hz, requires separate AC power cord - 5VDC output, 1A, 5 watts - For
J2382/83A/B
0950-3169Wall mount power supply module - 110-127V AC 57-63Hz input - 13V DC output at 300mA (USA, Canada) - For use
with the J2592A external JetDirect LAN interface module
0950-3170Power supply module - 209-253VAC input, 47-53Hz - 13VDC output, 300mA (Europe, Israel) - For use with the J2592A
external JetDirect LAN interface module
0950-3171Power supply module - 220-240VAC input, 47-53Hz - 13VDC output, 300mA (U.K., Hong Kong) - For use with the
J2592A external JetDirect LAN interface module
0950-3172Power supply module - 240VAC input, 47-53Hz - 13VDC output, 300mA (Australia) - For use with the J2592A external
JetDirect LAN interface module
0950-3348Wall mount power supply module (MEI-AH ED12006) - 110-127VAC input, 57-63Hz - 13VDC output, 800mA, 10.4 watts
(for use in the United States and Canada) - For models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A, J3282B,
J4101A/B, J4102A/B
0950-3349Wall mount power supply module (MEI-AH ED12007) - 230VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts (for
use in Europe and Israel) - For JetDirect/infrared interface models J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A,
J3282B, J4101A/B, J4102A/B
0950-3350Wall mount power supply module (MEI-AH ED12008) - 220-240VAC input, 47-53Hz - 13VDC output, 800mA, 10.4 watts
(for use in the United Kingdom) - For JetDirect/infrared interfaces J2590/91/93/94A, J2964A, J3258A/B, J3263/64/65A,
51645AABlack print cartridge (High capacity) - Prints approximately 840 pages based on 5% density on a 8 inch by 10 inch print
area (for Asia/Pacific)
51645ACBlack print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8 inch by 10 inch print
area (for Canada)
51645AEBlack print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8 inch by 10 inch print
area (for Europe)
51645ALBlack print cartridge (high capacity) - Prints approximately 840 pages based on 5% density on a 8 inch by 10 inch print
area (for Latin America)
51645GBlack print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area
(for USA)
51645GABlack print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area
(for Asia/Pacific)
51645GCBlack print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area
(for Canada)
51645GEBlack print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area
(for Europe)
51645GLBlack print cartridge (economy) - Prints approximately 415 pages based on 5% density on a 8 inch by 10 inch print area
(for Latin America)
C6613ANBlack print cartridges (High capacity) - (2 pack of 51645A) each prints approximately 840 pages based on 5% density on
a 8 inch (20.3cm) by 10 inch (25.4cm) print area (for USA)
NO LONGER SUPPLIED
Cleaning Supplies
C6247ADesignJet cleaning kit - Includes cleaning solution and 20 cleaning rags
Kit
C4698AColor management kit - Includes pantone tables for Windows & Macintosh applications, Kodak precision profiles,
Photoshop & IGC profiles in 4 disks, and color management user guide
NO LONGER SUPPLIED
Label
C3195-00057Safety label - Provides warning that encoder strip is sharp
Lubricant
6040-0854Synthetic Oil (1/2oz Plastic Bottle - for lubricating the front and rear slider rods
6040-0855Synthetic oil - 4oz (113g) plastic bottle
Maintenance Kit
C3195-69166Maintenance kit - Includes service station (spittoon) assembly, carriage (Y-Axis) motor, encoder strip, and lubricating oil
REQUIRES RETURN OF DEFECTIVE PART
C3195-60166New Part for C3195-69166
Manual
5959-9733HP-GL/2 & HP RTL reference guide - Programming information, handbook for developers
C4705-60023DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (Taiwan)
NO LONGER SUPPLIED
C4705-90000DesignJet 700, 750C, 750C plus and 755CM service manual (2nd edition, August 1996) - Note: Coverage limited to
C3195A, C3196A, C3198A, C3198B, C4705A, C4706A, C4708A, and C4709A
Manual Kit
C4705-60021DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (English)
C4705-60022DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (Korean)
NO LONGER SUPPLIED
C4705-60024DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (German)
NO LONGER SUPPLIED
C4705-60025DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (French)
C4705-60026DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (Spanish)
NO LONGER SUPPLIED
C4705-60027DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (Italian)
NO LONGER SUPPLIED
C4705-60028DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (Japanese)
NO LONGER SUPPLIED
C4705-60029DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay
(Portuguese)
NO LONGER SUPPLIED
C4705-60030DesignJet 700/750C Plus manual kit - Includes user's guide, quick reference guide, and front panel overlay (Chinese)
NO LONGER SUPPLIED
Packaging
C3195-00031Repackaging kit - For stand/legs of plotter
C3195-60113Repackaging kit - For main plotter unit
NO LONGER SUPPLIED
Return Kit
5183-5268Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.5 InkJet cartridges covered under the
CREW program - For USA
5184-2833Return kit with box and instructions - For returning defective Thermal InkJet (TIJ) 2.5 InkJet cartridges covered under the
CREW program - For use outside of the USA
Software
C6072-60281Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox
software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy
disks (English)
C6072-60284Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox
software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy
disks (German)
C6072-60285Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox
software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy
disks (French)
C6072-60286Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox
software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy
disks (Spanish)
C6072-60287Toolbox and driver software - HP-GL/2 and RTL drivers for Windows 3.1/95/98/NT 4.0 (all DesignJets), and toolbox
software for Windows 95/NT 4.0 (Only for DesignJet 430/450C/455CA/1050C/1055CM) - On 3.5-inch 1.44MB floppy
disks (Italian)
C6072-60301HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks
(English)
C6072-60304HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks
(German)
C6072-60305HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks
(French)
C6072-60306HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks
(Spanish)
C6072-60307HP-GL/2 driver software for AutoCAD - For DOS and Windows 3.1/95/NT 4.0 - On 3.5-inch 1.44MB floppy disks (Italian)
C6071-60368ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series
(Japanese)
C7779-60040ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series
(Chinese)
C7779-60041ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series
(English)
C7779-60042ZEHRaster software for UNIX - Allows TIFF and JPEG printing on DesignJet 700 series, 1000 series, and CP series