HP 560 Datasheet

Datasheet
HP Latex 560 Printer
Accommodate production peaks and rely on HP Latex image quality for the life of this 64-inch printer
Match peak demand with fast response times Get vivid color and consistent quality over
Keep costs low
time
Load rolls in one minute or less with the spindleless pivot table and automatic skew adjustment.
Respond fast with quality—up to 248 ft²/hr (23 m²/hr) indoor quality mode.
Cut risk, eliminate delays—prints are dry and scratch resistant immediately after printing.
2
Easily produce high-quality double-sided banners —automation enables efficiency and speed.
Produce highly saturated prints with up to 50% more ink density , using vivid print modes.
Print colors right the first time with the i1 embedded spectrophotometer and HP Custom
3
4
Substrate Profiling. Consistent, day-one image quality over time—
native 1200 dpi, user changes printheads, auto nozzle replacement.
Handle robust tiling applications with consistent colors to <= 2 dE2000 and +/-1 mm/m length
5
accuracy.
Get the high-quality results of high-cost materials on lower cost banners and vinyls with the wiper roller.
Double your work space —do all tasks from the
6
front of the printer, including media/ink cartridge changes.
Cut 2 to 3 hours/month maintenance —automatic
7
maintenance, OMAS media calibration save operator time.
Plan production in advance, optimize supplies usage, and save time—utilities predict how much ink is needed.
For more information, please visit http://www.hp.com/go/latex560 Join the community, find tools, and talk to experts. Visit the HP Latex Knowledge Center at https://hplatexknowledgecenter.com/
1
The HP Latex Mobile is compatible with Android™ 4.1.2 or later and iOS 7 or later, and requires the printer and the smart phone to be connected to the Internet.
2
Scratch resistance is comparable to hard-solvent inks on self-adhesive vinyl and PVC banner. Scratch-resistance comparison based on testing third-generation HP Latex Inks and representative hard-solvent inks. Estimates by
HP Image Permanence Lab on a range of media.
3
Compared to the HP Latex 360 Printer when using the same print mode.
4
ICC profiling with the spectrophotometer does not support uncoated textiles and backlits.
5
The color variation inside a printed job has been measured at 10-pass mode on vinyl media within this limit: maximum color difference (95% of colors) <= 2 dE2000. Reflective measurements on a 943 color target under CIE standard illuminant D50, and according to the standard CIEDE2000 as per CIE Draft Standard DS 014-6/E:2012. 5% of colors may experience variations above 2 dE2000. Backlit substrates measured in transmission mode may yield different results.
6
Available work space based on internal HP testing in January, 2016 comparing the HP Latex 500 Printer series to key competitive printers.
7
Based on internal HP testing and manual maintenance requirements published in user manuals available as of January, 2016 for key competitive productscompared to automatic maintenance provided by the HP Latex 500 Printer series.
Datasheet | HP Latex 560 Printer
Technical specifications
Print
Printing modes 980 ft²/hr (91 m²/hr)- Max Speed (1-pass)
Print resolution Up to 1200 x 1200 dpi
Ink types Water-based HP Latex Inks
Ink cartridges 7 (black, cyan, light cyan, light magenta, magenta, yellow, HP Latex Optimizer)
Cartridge size 775 ml
Printheads 7 (2 cyan/black, 2 magenta/yellow, 1 light cyan/light magenta, 2 HP Latex Optimizer)
Long-term print-to-print repeatability
Media
Handling Roll feed, take-up reel, wiper roller, automatic cutter (for vinyl, paper-based media, backlit polyester film)
Media types Banners, self-adhesive vinyls, films, papers, wallcoverings, canvas, synthetics, fabrics, mesh, textiles
Roll size 10 to 64-in (254 to 1625-mm) rolls; 23 to 64-in (580 to 1625-mm) rolls with full support
Roll weight 121 lb (55 kg)
Roll diameter 9.8 in (250 mm)
Thickness Up to 19.7 mil (Up to 0.5 mm)
Applications
Connectivity
Interfaces Gigabit Ethernet (1000Base-T)
Dimensions (w x d x h)
Printer 101 x 31 x 56 in (2560 x 792 x 1420 mm)
Shipping 108 x 41 x 67 in (2750 x 1037 x 1689 mm)
Operating area 109 x 71 in (2761 x 1792 mm)
Weight
Printer 485 lb (220 kg)
Shipping 728 lb (330 kg)
What's in the box
Environmental ranges
Operating temperature 59 to 86ºF (15 to 30ºC)
Operating humidity 20 to 80% RH (non-condensing)
Acoustics
Sound pressure 59 dB(A) (operating), 39 dB(A) (idle), <15 dB(A) (sleep)
Sound power 7.3 B(A) (operating), 5.4 B(A) (idle), <3.5 B(A) (sleep)
Power
Consumption 4 kW (printing), 85 W (ready), <3 W (sleep)
Requirements Input voltage (auto ranging) 200 to 240 VAC two wires and PE; 50/60 Hz (+/- 3 Hz); two power cords; 13 A max per
Certification
Safety IEC 60950-1+A1+A2 compliant; USA and Canada (CSA listed)
Electromagnetic Compliant with Class A requirements, including: USA (FCC rules), Canada (ICES)
Environmental ENERGY STAR; WEEE; REACH; EPEAT Bronze; OSHA
Warranty
334 ft²/hr (31 m²/hr)- Outdoor High Speed (4-pass 4-color) 301 ft²/hr (28 m²/hr)- Outdoor Plus (4-pass) 248 ft²/hr (23 m²/hr)- Indoor Quality (6-pass) 151 ft²/hr (14 m²/hr)- Indoor High Quality (10-pass) 69 ft²/hr (6 m²/hr)- Backlits, Textiles, and Canvas (16-pass) 54 ft²/hr (5 m²/hr)- High Saturation Textiles (20-pass)
Average ≤ 1 dE2000, 95% of colors ≤ 2 dE2000
Banners; Displays; Double-sided banners; Exhibition and event graphics; Exterior signage; Indoor posters; Interior decoration; Light boxes - film; Light boxes - paper; Murals; POP/POS; Posters; Textile; Vehicle graphics
HP Latex 560 Printer, printheads, maintenance cartridge, ink collector, output platen protector, printer stand, take-up reel, loading accessory, user maintenance kit, edge holders, wiper roller, quick reference guide, setup poster, documentation software, power cords
power cord
One-year limited hardware warranty
1
2
Ordering information
Product
M0E29A HP Latex 560 Printer
Accessories
2LY32A F0M59A F0M63A F0M64A T4E58B T7U73A T7U74A
HP Latex 500 Media Lifter HP Latex User Maintenance Kit HP Series 300 Media Loading Accessory HP Series 300/500 Edge Holder Kit HP Latex Media Saver Kit HP Latex 500 Wiper Roller HP Series 300 Ink Collector Foam Kit
Original HP printing supplies
CZ677A HP 831 Cyan/Black Latex Printhead CZ678A HP 831 Yellow/Magenta Latex Printhead CZ679A HP 831 Light Magenta/Light Cyan Latex Printhead CZ680A HP 831 Latex Optimizer Printhead CZ681A HP 831 Latex Maintenance Cartridge CZ682A HP 831A 775-ml Black Latex Ink Cartridge CZ683A HP 831A 775-ml Cyan Latex Ink Cartridge CZ684A HP 831A 775-ml Magenta Latex Ink Cartridge CZ685A HP 831A 775-ml Yellow Latex Ink Cartridge CZ686A HP 831A 775-ml Light Cyan Latex Ink Cartridge CZ687A HP 831A 775-ml Light Magenta Latex Ink Cartridge CZ706A HP 831 775-ml Latex Optimizer Ink Cartridge
Original HP large format printing materials
HP Permanent Gloss Adhesive Vinyl (REACH certified ) HP Backlit Polyester Film HP PVC-free Durable Smooth Wall Paper (REACH , FSC® , UL GREENGUARD GOLD certified ) HP Premium Poster Paper (FSC® certified )
For the entire HP Large Format Printing Materials portfolio, please see HPLFMedia.com.
4
4 5
3
3 5 6
Service and Support
U9AX7E HP 2 year NBD with Defective Media Retention U9AY0E HP 3 year NBD with Defective Media Retention U9AY1PE HP 1 year Post Warranty NBD with Defective Media Retention U9CR9PE HP 2 year Post Warranty NBD with Defective Media Retention M0E29-67087 HP Service Maintenance Kit 3 M0E29-67085 HP Service Maintenance Kit 1
ECO highlights
Better for printing companies/operators—no special ventilation or HAPs[eco01] Better for the end-customer, more differentiation—odorless prints reach more indoor
2
spaces Better for the environment—HP designs end-to-end sustainability into large-format printing HP Latex Inks are UL GREENGUARD GOLD Certified
Please recycle printing hardware and eligible printing supplies. Find out how at our website: http://www.hp.com/ecosolutions
1
Special ventilation equipment (air filtration) is not required to meet U.S. OSHA requirements. Special ventilation equipment installation is at the discretion of the customer—see the Site Preparation Guide for details. Customers should consult state and local requirements and regulations. HP Latex Inks were tested for Hazardous Air Pollutants, as defined in the Clean Air Act, per U.S. Environmental Protection Agency Method 311 (testing conducted in 2013) and none were detected.
2
There is a broad set of media with very different odor profiles. Some of the media can affect the odor performance of the final print.
3
UL GREENGUARD GOLD Certification to UL 2818 demonstrates that products are certified to UL's GREENGUARD standards for low chemical emissions into indoor air during product usage. For more information, visit http://www.ul.com/gg or http://www.greenguard.org.
4
ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency. EPEAT registered where applicable/supported. See http://www.epeat.net for registration status by country.
1
Reflective measurements on a 943 color target under CIE standard illuminant D50, and according to the standard CIEDE2000 as per CIE Draft Standard DS 014-6/E:2012. Backlit substrates measured in transmission mode may yield different results.
2
Performance may vary depending on media—for more information, see http://www.hp.com/go/mediasolutionslocator. For best results, use textiles that do not stretch. The optional ink collector is required for porous textiles.
3
This product does not contain substances listed as SVHC (155) per Annex XIV of the EU REACH directive published as of June 16, 2014 in concentrations exceeding 0.1%. To determine the status of SVHC in HP products, see the HP REACH Declaration published at HP Printing Products and Consumable Supplies.
4
HP Large Format Media take-back program availability varies. Some recyclable HP papers can be recycled through commonly available recycling programs. Recycling programs may not exist in your area. See http://www.HPLFMedia.com/hp/ecosolutions for details.
5
BMG trademark license code FSC®-C115319, see http://www.fsc.org. HP trademark license code FSC®-C017543, see http://www.fsc.org. Not all FSC®-certified products are available in all regions.
6
UL GREENGUARD GOLD Certification to UL 2818 demonstrates that products are certified to UL's GREENGUARD standards for low chemical emissions into indoor air during product usage. For more information, visit http://www.ul.com/gg or http://www.greenguard.org.
3
us-en June 2020
DOC-M
Loading...