QuickSpecs
HPE Standard Power Supplies
Overview
Page 1
HPE Standard Power Supplies
Looking for high-efficiency power solutions at an entry-level price for your ProLiant Gen9 Essential Server or Gen10 ProLiant
10/100 Series Servers? HPE
redundant power configurations.
The HPE 550W FIO Power Supply offers Silver
non
The HPE 900W Gold Redundant AC Power Input Module with Power Backplane can be configured to support power redundancy in
Gen9 DL and ML 10/100 Series Servers that offer only a
loss. With an 80 Plus Gold power
this power option helps to reduce operating expenses while protecting
against trapped power capacity in the data center. Ho
easy deployment and replacement.
The HPE 500W FIO Power Supply offers Gold
non-redundant power configurations for Gen10 ProLiant ML350 Gen10.
HPE 550W FIO Power Supply
1.
Power Supply Identification Label
2.
C-14 Input Connector
HPE 900W Gold AC 240VDC Power Input Module with Backplane
Standard Power Supplies offer an optimized set of features with options for both redundant and non-
-certified 80 Plus power efficiency up to 89% with an optimized set of features for
-redundant power configurations for Gen9 DL and ML 10/100 Series Servers.
single power supply bay, providing additional protection against power
efficiency rating up to 92%,
t-plug AC power input modules allow for better serviceability with fast and
-certified 80 Plus power efficiency up to 92% with an optimized set of features for
QuickSpecs
HPE Standard Power Supplies
Overview
Page 2
1.
AC Power Input Module #2
4.
C-14 Power Input Connector
2.
Hot-Plug Quick Release Lever
5.
Power Supply Backplane
3.
AC Power Input Module #1
HPE 500W Non Hot Plug Low Halogen FIO Power Supply
1.
Power Supply Identification Label
2.
C-14 Input Connector
3.
Cable Clip (Output Side)
Models
HPE Standard
Power Supplies
HPE ProLiant Gen9 Essential Server Power Supplies – Non-Redundant
NOTE:
support for HPE Power Discovery
ProLiant Gen9 Essential servers.
HPE 550W Standard FIO Power Supply Kit
730941-B21
NOTE: This is a Factory Installed Option (FIO) only.
HPE ProLiant Gen9 Essential Server Power Supplies – Redundant
NOTE: Supports Gold-level efficiency (92%) with a standard C14 inlet connector. No
support for HPE Power Discovery Services. Only compatible with select HPE
ProLiant Gen9 Essential servers.
NOTE: Each Redundant Power Supply Backplane can support up to two (2) power
input modules. Non
installed can provide up to 900W (200
127VAC)
of power. Redundant configurations with two power input modules installed can
provide up to
NOTE: 744689-B21 will not work with 814835-B21.
HPE 900W Standard AC 240VDC Power Input Module
775595-B21
HPE 900W Standard AC 240VDC RPS Power Backplane
814835-B21
HPE 900W Standard AC 240VDC Redundant Power Supply Kit
820792-B21
NOTE: Each Redundant Power Supply Backplane can support up to two (2) power
input modules.
NOTE:
B21. Only AC input will be enable.
NOTE:
Power Input Module #1 is the primary AC Power Input Module. Redundant AC Power
Input Module #2 is the backup AC Power Input Module.
NOTE:
B21) must be used with Power Backplane (814835-B21).
HPE ProLiant Gen10 Entry Level Server Power Supplies – Non-Redundant
Supports Silver-level efficiency (89%) with a standard C14 inlet connector. No
Services. Only compatible with select HPE
-redundant configurations with a single power input module
– 240VAC) and up to 550W (100 –
800W (200 – 240VAC) and up to 550W (100 – 127VAC) of power.
240VDC function will not work when 775595-B21 is installed in 745813-
Redundant AC Power Input Modules do not share power. Redundant AC
HPE 900W Gold (Redundant) AC 240VDC Power Input Module (775595-
QuickSpecs
HPE Standard Power Supplies
Overview
Page 3
NOTE:
support for HPE Power Discovery
ProLiant Gen10 servers.
HPE 500W Low Halogen FIO Power Supply Kit
837074-B21
NOTE: This is a Factory Installed Option (FIO) only.
Supports Gold-level efficiency (92%) with a standard C14 inlet connector. No
Services. Only compatible with select HPE
QuickSpecs
HPE Standard Power Supplies
Standard Features
4
HPE 900W Gold Power
Supply
High Efficiency
Gold certified 80 Plus power efficiency rating, up to 92% efficiency, reduces
operating expenses and trapped power in the data center.
Power Redundancy
Can be configured to support power redundancy in ProLiant servers that offer
only a single power supply bay, providing additional
loss.
Serviceability
Hot-plug AC power input modules that allow for fast and easy deployment
and replacement.
Compatibility
Available as an upgrade option for most ProLiant Gen9 10/100 Series servers,
allowing spares to be shared across a wider range servers.
HPE 550W FIO Power
Supply
High Efficiency
Silver certified 80 Plus power efficiency rating, up to 89% efficiency, reduces
operating expenses and trapped power in the data center.
Compatibility
Standard power supply for most ProLiant Gen9 10/100 Series servers,
allowing spares to be shared across a wider range servers.
HPE 500W Low
Halogen FIO Power
Supply
High Efficiency
Gold certified 80 Plus power efficiency rating, up to 92% efficiency, reduces
operating expenses and trapped power in the data center.
Compatibility
Standard power supply for ProLiant ML350 Gen10
80Plus Certification
The 80PLUS test protocol was developed jointly by Ecos Plug Load Solutions and the Electric Power
Research Institute (EPRI) in 2003, with the program being formally launched in 2004.
The 80 PLUS performance specification requires power supplies in server
efficient at 20%, 50% and 100% of rated load with a true power factor of 0.9 or greater. This makes an 80
PLUS certified power supply substantially more efficient than typical power supplies found in many other
electrical devi
Who benefits from the 80PLUS power supply program?
•
•
What are the efficiency requirements for each certification level?
80 PLUS Certification
230V Internal
% of Rated Load
20%
50%
100%
80 PLUS Bronze
81% 85% 81%
80 PLUS Silver
85%
89%
85%
80 PLUS Gold
88%
92%
88%
What level of certification
The
Gold Power Supply and 500W FIO Gold Power Supply meet 80PLUS Gold certification requirements. To
protection against power
ces.
Commercial/Residential Consumers - empowered with information regarding energy efficient IT
options that help them cut energy costs and reduce their environmental impact
Utility/Power Providers - participation in a program that focuses on reducing power demands on
overburdened grids as well as reducing power waste and its associated environmental impact
s to be 80% or greater energy
do HPE Entry-Level Power Supplies meet?
HPE 550W FIO Power Supply meets 80PLUS Silver certification requirements. The HPE 900W
Page
QuickSpecs
HPE Standard Power Supplies
Standard Features
Page 5
review 80Plus certification reports for all HPE Power Supply options, please refer to the 80Plus website
at: http://www.80plus.com/
Compatibility
To check for power supply compatibility, please review the appropriate HPE Server QuickSpecs at
http://www.hpe.com/info/qs.
.
QuickSpecs
HPE Standard Power Supplies
Service and Support
6
Service and Support
HPE Standard Power Supplies are supported as a part of the overall ProLiant infrastructure.
HPE Technology Services for Industry Standard Servers
HPE Technology Services delivers confidence, reduces risk and helps customers realize agility and
stability powered by a rich portfolio of consulting and support services designed to add value to our
core products and
to help prevent problems and solve
issues faster. Our support technology lets you to tap into the knowledge of millions of devices and
thousands of experts to stay informed and in control, anywhere, any time.
Protect your business beyond warrant
HPE support services offer complete care and support expertise with committed response choices that
are designed to meet your IT and business needs.
Connect your devices
Unlock all of the benefits of your technology investment by connecting your products to Hewlett
Packard Enterprise
single consolidated view of your environment. By connecting, you will receive 24x7monitoring, pre
failure alerts, automatic call logging, and automatic parts dispatch. HPE Pr
Datacenter Care Service customers will also benefit from proactive activities to help prevent issues and
increase optimization. All of these benefits are already available to you with your server storage and
networking products
1
2– HPE CSC reports 2014 - 2015
HPE Support Center
Personalized online support portal with access to information, tools and experts to support Hewlett
Packard Enterprise
Enterprise
http://www.hpe.com/services/hpsc
HPE
for live support. Now, you can get access to personalized IT support anywhere, anytime.
HPE
Hewlett
Packard Enterprise
agreement.
NOTE: *HPE' Support Center Mobile App is subject to local availability.
Warranty / Service
Coverage
For ProLiant servers and storage systems, this service covers HPE-branded hardware options qualified
for the server, purchased at the same time or afterward, internal to the enclosure, as well as external
monitors up to 22" and tower UPS products; these it
for the same coverage period as the server unless the maximum supported lifetime and/or the
maximum usage limitation has been exceeded. Coverage of the UPS battery is not included; standard
warranty terms a
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by
due to malfunction. It does not apply to any exchange of Disk or
SSD/Flash Drives that have
Hewlett Packard Enterprise
as consumable parts and/or that have exceeded maximum supported lifetime and/or the maximum
usage limit as set forth in the manufacturer's operating manual or the technical data
eligible for the defective media retention service feature option.
For more information
To learn more on services for HPE ESSN Options, please contact your Hewlett Packard Enterprise sales
representative or
http://www.hpe.com/services
solutions Connect to Hewlett Packard Enterprise
y with HPE Support Services
. Achieve up to 77%1 reduction in down time, near 100%2 diagnostic accuracy and a
-
oactive Care Service and HPE
, securely connected to HPE support.
- IDC Whitepaper
business products. Submit support cases online, chat with Hewlett Packard
experts, access support resources or collaborate with peers. Learn more
's Support Center Mobile App* allows you to resolve issues yourself or quickly connect to an agent
Insight Remote Support and HPE Support Center are available at no additional cost with a
warranty, HPE Support Services or Hewlett Packard Enterprise contractual support
ems will be covered at the same service level and
nd conditions apply.
Hewlett Packard Enterprise
Hewlett Packard Enterprise Authorized Channel Partner. Or visit:
not failed. SSD/Flash Drives that are specified by
sheet are not
Page
QuickSpecs
HPE Standard Power Supplies
Related Options
7
Related Options
VAC C13 to C14 Power
Cables
HPE C13 - C14 WW 250V 10A Gray 0.7m Jumper Cord
A0K03A
HPE C13 - C14 WW 250V 10A Gray 1.37m Jumper Cord
A0K04A
HPE C13 - C14 WW 250V 10A Gray 3.0m Jumper Cord
A0K06A
HPE C13 - C14 WW 250V 10Amp 0.7m Jumper Cord
142257-B28
HPE C13 - C14 WW 250V 10Amp 1.4m Jumper Cord
142257-006
HPE C13 - C14 WW 250V 10Amp 1.4m 15 pc Jumper Cord
142257-007
HPE C13 - C14 WW 250V 10Amp 2.0m Jumper Cord
A0K02A
HPE C13 - C14 WW 250V 10Amp 2.5m Jumper Cord
142257-002
HPE C13 - C14 WW 250V 10Amp 3.0m Jumper Cord
142257-003
Page
QuickSpecs
HPE Standard Power Supplies
Technical Specifications
8
HPE 550W Standard FIO Power Supply Kit
HPE's Generic Part Number
748949-001
HPE's Spares Part Number
766879-001
Input Voltage Range ( V rms )
100-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( Vrms )
100
120
127
200
208
220
230
240
Maximum Rated Output Wattage Rating
550
550
550
550
550
550
550
550
Nominal Input Current ( A rms )
6.5
5.4
5.1
3.2
3.0
2.9
2.7
2.6
Maximum Rated Input Wattage Rating ( Watts )
645
638
636
624
623
623
622
621
Maximum Rated VA (Volt-Amp)
652
644
642
630
630
629
628
627
Efficiency ( % )
85.2
86.3
86.5
88.1
88.2
88.4
88.5
88.6
Power Factor
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
Leakage Current ( mA )
0.32
0.38
0.40
0.63
0.65
0.69
0.72
0.75
Maximum Inrush Current (A peak ) 30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
2201
2176
2169
2130
2127
2124
2121
2119
HPE 900W Gold (Non-Redundant) AC Power
HPE's Generic Part Number (Backplane)
743908-001
HPE's Generic Part Number (Power Input Mod)
743907-001
HPE's Spares Part Number (Backplane)
754376-001
HPE's Spares Part Number (Power Input Mod)
744689-B21
Input Voltage Range ( V rms ) 100-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( Vrms )
100
120
127
200
208
220
230
240
Maximum Rated Output Wattage Rating
550
550
550
900
900
900
900
900
Nominal Input Current ( A rms )
6.2 5.1 4.8 5.0 4.8 4.5 4.3 4.1
Maximum Rated Input Wattage Rating ( Watts )
616
606
604
993
993
991
988
985
Maximum Rated VA (Volt-Amp)
622
612
610
1003
1003
1001
998
995
Efficiency ( % )
89.4
90.8
91.1
90.6
90.6
90.8
91.1
91.4
Power Factor
0.99
0.99 0.99 0.99 0.99 0.99 0.99 0.99
Leakage Current ( mA )
0.33
0.40
0.42
0.67
0.69
0.73
0.77
0.80
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
2099 2065
2058
3386
3386
3379
3368
3358
*NOTE: The above power specifications are based on a configuration that includes a single power backplane with one AC power
input modules installed.
(730941-B21)
Input Module (744689-B21) with Power
Backplane (745813-B21)*
Page
QuickSpecs
HPE Standard Power Supplies
Technical Specifications
Page 9
HPE 900W Gold (Redundant) AC 240VDC Power
HPE's Generic Part Number (Backplane)
814832-001
HPE's Generic Part Number (Power Input Mod)
775592-001
HPE's Spares Part Number (Backplane)
830022-001
HPE's Spares Part Number (Power Input Mod)
830219-B21
Input Voltage Range ( V rms )
100-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( Vrms )
100
120
127
200
208
220
230
240
Maximum Rated Output Wattage Rating
550
550
550
900
900
900
900
900
Nominal Input Current ( A rms )
6.3
5.1
4.8
4.9
4.7
4.5
4.3
4.1
Maximum Rated Input Wattage Rating ( Watts )
619
611
609
976
975
973
972
971
Maximum Rated VA (Volt-Amp)
626
617
615
986
985
983
982
981
Efficiency ( % )
88.8
90.0
90.3
92.2
92.3
92.5
92.6
92.7
Power Factor
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
Leakage Current ( mA )
0.37
0.45
0.47
0.75
0.78
0.82
0.86
0.90
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
2112
2084
2077
3329
3325
3318
3314
3311
*NOTE: The above power specifications are based on a configuration that includes a single power backplane with 2 AC power
input modules installed.
HPE 500W Low Halogen FIO Power Supply Kit
HPE's Generic Part Number
837071-001
HPE's Spares Part Number
866726-001
Input Voltage Range ( V rms )
100-240
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( Vrms )
100
120
127
200
208
220
230
240
Maximum Rated Output Wattage Rating
500
500
500
500
500
500
500
500
Nominal Input Current ( A rms )
5.8
4.8
4.5
2.8
2.7
2.5
2.4
2.3
Maximum Rated Input Wattage Rating ( Watts )
572
565
564
554
553
553
552
552
Maximum Rated VA (Volt-Amp)
578
571
569
560
559
558
558
557
Efficiency ( % )
87.4
88.4
88.7
90.3
90.4
90.5
90.6
90.6
Power Factor
0.99
0.99
0.99
0.99
0.99
0.99
0.99
0.99
Leakage Current ( mA )
0.43
0.50
0.55
0.87
0.90
0.96
1.00
1.04
Maximum Inrush Current (A peak )
30
Maximum Inrush Current duration ( ms )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
1953
1929
1923
1890
1888
1885
1884
1882
Input Module (775595-B21) with Power
Backplane (814835-B21)*
(837074-B21)
QuickSpecs
HPE Standard Power Supplies
Technical Specifications
Page 10
HPE 550W FIO Power Supply:
Operating Temperature
41° to 122°F (5° to 50°C)
Operating Relative Humidity (%)
5% to 95%, non-condensing
Operating Elevation
The maximum ambient temperature of the power supply shall have
an altitude derating, from sea level, of 1.0°C per every 304.8 m (1.8°F
per every 1000ft) above sea level to a maximum of 3048m
(10,000ft)
Storage Temperature
-40° to 185°F (-40 to 85°C)
Storage Relative Humidity (%)
5% to 95%, non-condensing
Storage Elevation
0 to 50,000ft (0 to 15,240m)
Input Voltage
Low Line
Rated: 100V - 127V; Min 90V to Max 132V
High Line
Rated: 200 - 240V; Min 180V to Max 264V
Input Frequency
Rated: 50 to 60Hz; Min 47Hz to Max 63Hz
Conformance Standards
CE Mark, UL, CUL, IEC, EN, KC, BSMI, CCC, TUV, CISPR Class A
Mechanical Dimensions (WxHxD)
4.23 x 1.57 x 6.9 in (10.74 x 3.99 x 17.53 cm)
Unit Weight
2.38 lbs (1.08 kg)
Kit Contents
Factory integrated 550W FIO power supply
HPE 900W AC 240VDC Power Input Module with
Backplane:
Operating Temperature
41° to 122°F (5° to 50°C)
Operating Relative Humidity (%)
5% to 95%, non-condensing
Operating Elevation
5000ft (1524m); Derate operating temperature 1.0°C every 1000ft
(304.8m) to maximum of 10,000ft (3048m)
Storage Temperature
-40° to 185°F (-40 to 85°C)
Storage Relative Humidity (%)
5% to 95%, non-condensing
Storage Elevation
0 to 50,000ft (0 to 15,240m)
Input Voltage
Low Line
Rated: 100V - 127V; Min 90V to Max 132V
High Line
Rated: 200 - 240V; Min 180V to Max 264V
Input Frequency
Rated: 50 to 60Hz; Min 47Hz to Max 63Hz
Conformance Standards
CE Mark, UL, cUL, IEC, EN, KCC, BSMI, CCC, TUV, C-tick, CISPR Class A
Mechanical Dimensions (WxHxD)
Power Input Module
8.28 x 4.23 x 1.54 in (21
4.22 x 2.04 x 1.46 in (10.72 x 5.18 x 3.7 cm)
Unit Weight
Power Input Module
1.79 lbs (0.82 kg)
0.77 lbs (0.35 kg)
Kit Contents
Power Backplane (814835-B21)
(1) Power backplane, installation/safety guide, documentation
AC 240VDC Power Input Module (775595-B21)
(1) AC power input module, (1) IEC C13 – C14 jumper cable,
installation/safety guide, documentation
AC 240VDC Redundant Power Supply Kit (820792-B21)
Power backplane, (2) AC 240VDC power input module, (2) IEC C13 –
C14 jumper cable, installation/safety guide, documentation
Backplane
Backplane
.02 x 10.74 x 3.9 cm)
QuickSpecs
HPE Standard Power Supplies
Technical Specifications
Page 11
HPE 500W Low Halogen FIO Power Supply:
Operating Temperature
41° to 131°F (5° to 55°C)
Operating Relative Humidity (%)
5% to 95%, non-condensing
Operating Elevation
The maximum ambient temperature of the power supply shall have
an altitude derating, from sea level, of 1.0°C per every 304.8 m (1.8°F
per every 1000ft) above sea level to a maximum of 3048m
(10,000ft)
Storage Temperature
-40° to 185°F (-40 to 85°C)
Storage Relative Humidity (%)
5% to 95%, non-condensing
Storage Elevation
0 to 50,000ft (0 to 15,240m)
Input Voltage
Low Line
Rated: 100V - 127V; Min 90V to Max 132V
High Line
Rated: 200 - 240V; Min 180V to Max 264V
Input Frequency
Rated: 50 to 60Hz; Min 45Hz to Max 63Hz
Conformance Standards
CE Mark, UL, CUL, IEC, EN, KC, BSMI, CCC, TUV, CISPR Class A
Mechanical Dimensions (WxHxD)
5.72 x 1.57 x 6.30 in (14.55 x 4.0x 16.0 cm)
Unit Weight
2.31 lbs (1.05 kg)
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett Packard Enterprise offers end-of-life product return, trade-in,
and recycling programs
Products returned to Hewlett Packard
or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disa
Hewlett Packard Enterprise web site. These instructions may be used by
recyclers and other WEEE treatment facilities as well as Hewlett Packard
Enterprise OEM customers who integrate and re
Enterprise equipment.
, in many geographic areas, for our products.
Enterprise will be recycled, recovered
ssembly instructions) is posted on the
-sell Hewlett Packard
QuickSpecs
HPE Standard Power Supplies
Summary of Changes
12
Date
Version History
Action
Description of Change
16-Oct-2017
From Version 6 to 7
Changed
Overview and Standard Features were revised.
25-Sep-2017
From Version 5 to 6
Added
New HPE 500W Low Halogen FIO Power Supply was added to
the QuickSpecs.
Changed
Overview, Standard Features, and Technical Specifications
to HPE Standard Power Supplies.
15-Aug-2016
From Version 4 to 5
Changed
Models, Standard Features, and Technical Specifications were
revised.
Removed
800W Gold (Redundant) AC Power Input Module was
removed from the QuickSpecs.
19-Feb-2016
From Version 3 to 4
Changed
Overview section was revised.
01-Dec-2015
From Version 2 to 3
Added
Added HPE 900W Gold (Redundant) AC 240DVC Power Input
Module to QuickSpecs.
Changed
Overview, Service and Support, Power Specifications, and
Technical Specifications were revised.
01-Dec-2014
From Version 1 to 2
Changed
Changes made throughout the entire QuickSpecs.
Sign up for updates
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty.
shall not be liable for technical or edit
c04390737 - 15030 - Worldwide - V7 - 16-October-2017
were revised.
The title was changed from HPE Entry-Level Power Supplies
Hewlett Packard Enterprise products and
orial errors or omissions contained herein.
Hewlett Packard Enterprise
Page
Loading...