HP 5500 HI, 5500-24G-4SFP HI, 5500-24G-PoE+-4SFP HI, 5500-48G-4SFP HI, 5500-48G-PoE+-4SFP HI Quickspecs

HP 5500-24G-4SFP HI Switch with 2 interface Slots

HP 5500-24G-PoE+-4SFP HI Switch with 2 Interface Slots

HP 5500-48G-4SFP HI Switch with 2 interface Slots

QuickSpecs

HP 5500 HI Switch Series

Overview

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 1

HP 5500-48G-PoE+-4SFP HI Switch with 2 Interface Slots

HP 5500-24G-SFP HI Switch with 2 Interface Slots

Models

HP 5500-24G-4SFP HI Switch with 2 interface Slots

JG311A

HP 5500-48G-4SFP HI Switch with 2 interface Slots

JG312A

HP 5500-24G-PoE+-4SFP HI Switch with 2 Interface Slots

JG541A

HP 5500-48G-PoE+-4SFP HI Switch with 2 Interface Slots

JG542A

HP 5500-24G-SFP HI Switch with 2 Interface Slots

JG543A

QuickSpecs

HP 5500 HI Switch Series

Overview

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 2

Key features

High expandability for investment protection
Premium resiliency and integrated management
SDN readiness with OpenFlow support
Full-featured IPv4/IPv6 dual stack
1440 W of PoE+ power using dual power supplies for high resiliency

Product overview

The HP 5500 HI Switch Series comprises Gigabit Ethernet switches that deliver outstanding resiliency, security, and multiservice
support capabilities at the edge layer of data center, large campus, and metro Ethernet networks. The switches can also be used in the
core layer of SMB networks.

With Intelligent Resilient Fabric (IRF) support and available dual power supplies, the HP 5500 HI Switch Series can deliver the highest
levels of resiliency and manageability. In addition, the PoE+ models provide up to 1,440 W of PoE+ power with the dual power supply
configuration.

Designed with two fixed 10GbE ports and extension module flexibility, these switches can provide up to six 10GbE uplink or 70 GbE
ports. With complete IPv4/IPv6, OpenFlow, and MPLS/VPLS features, the series provides investment protection with an easy transition
from IPv4 to IPv6 networks.

Features and benefits

Software-defined networking

OpenFlow

supports OpenFlow 1.0 and 1.3 specifications to enable SDN by allowing separation of the data (packet forwarding) and control
(routing decision) paths

Quality of Service

(QoS)

Advanced classifier-based QoS

classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority
level and rate limit to selected traffic on a per-port or per-VLAN basis

Traffic policing

supports Committed Access Rate (CAR) and line rate

Powerful QoS feature

creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS)
precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing,
weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin
(WDRR), SP+WDRR, and SP+WFQ.

Storm restraint

allows limitation of broadcast, multicast, and unknown unicast traffic rate to reduce unwanted broadcast traffic on the network

Management

Friendly port names

allow assignment of descriptive names to ports

sFlow

(RFC 3176)

provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this

QuickSpecs

HP 5500 HI Switch Series

Overview

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 3

allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real­time network monitoring purposes

Complete session logging

provides detailed information for problem identification and resolution

Remote configuration and management

enables configuration and management through a secure Web browser or a CLI located on a remote device

Manager and operator privilege levels

provides read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces

Management VLAN

segments traffic to and from management interfaces, including CLI/telnet, a Web browser interface, and SNMP

Command authorization

leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; an audit trail documents
activity

Secure web GUI

provides a secure, easy-to-use graphical interface for configuring the module via HTTPS

SNMPv1, v2c, and v3

facilitate centralized discovery, monitoring, and secure management of networking devices

Remote monitoring (RMON)

uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private
alarm extension group

Remote intelligent mirroring

mirrors ingress/egress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network

In-service software upgrade (ISSU)

enables operators to perform upgrades in the shortest possible amount of time with minimal risk to network operations or
traffic disruptions

Connectivity

Auto-MDIX

provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports

Packet storm protection

protects against broadcast, multicast, or unicast storms with user-defined thresholds

Ethernet operations, administration and maintenance (OAM)

detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the status of the
link between two devices

Flow control

provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations

Fixed 10GbE ports

provides two fixed SFP+ ports for a 20 GbE connection to the network without the need for additional extension interface
modules

Optional 10GbE ports

deliver, through the use of optional modules, additional 10GbE connections, which are available for uplinks or high-bandwidth
server connections; flexibly support copper, XFP, SFP+, or CX4 local connections

Optional 8-port SFP module

adds up to eight additional wirespeed Gigabit Ethernet ports for unprecedented Gigabit density in a single 1U enclosure

Jumbo packet support

supports up to 12288-byte frame size to improve the performance of large data transfers

High-bandwidth CX4 local stacking

achieves 12 Gbps per connection when using local CX4 stacking, allowing for up to 96 Gbps total stacking bandwidth (full duplex)
in a resilient stacking configuration

QuickSpecs

HP 5500 HI Switch Series

Overview

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 4

IEEE 802.3at Power over Ethernet (PoE+)

provides up to 30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless access points,
and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and
circuits that would otherwise be necessary in IP phone and WLAN deployments

Performance

Hardware-based wirespeed access control lists (ACLs)

help provide high levels of security and ease of administration without impacting network performance with a feature-rich
TCAM-based ACL implementation

Nonblocking architecture

delivers up to 224 Gb/s of wire-speed switching with a nonblocking switching fabric and up to 167 million pps throughput

Resiliency and high availability

Separate data and control paths

separates control from services and keeps service processing isolated; increases security and performance

Device Link Detection Protocol (DLDP)

monitors link connectivity and shuts down ports at both ends if unidirectional traffic is detected, preventing loops in STP-based
networks

Intelligent Resilient Framework (IRF)

creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router; switches do
not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached using standard
LACP for automatic load balancing and high availability; can eliminate the need for complex protocols like Spanning Tree
Protocol, Equal-Cost Multipath (ECMP), or VRRP, thereby simplifying network operation

Rapid Ring Protection Protocol (RRPP)

connects multiple switches in a high-performance ring using standard Ethernet technology; traffic can be rerouted around the
ring in less than 50 ms, reducing the impact on traffic and applications

Smart link

allows 50 ms failover between links

Virtual Router Redundancy Protocol (VRRP)

allows groups of two routers to dynamically back each other up to create highly available routed environments

Manageability

Dual flash images

provides independent primary and secondary operating system files for backup while upgrading

Multiple configuration files

allow multiple configuration files to be stored to a flash image

IEEE 802.1AB Link Layer Discovery Protocol (LLDP)

facilitates easy mapping using network management applications with LLDP automated device discovery protocol

Troubleshooting

allows ingress and egress port monitoring enabling network problem solving; virtual cable tests provide visibility into cable
problems

IPv6 management

future-proofs networking, as the switch is capable of being managed whether the attached network is running IPv4 or IPv6;
supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, and ARPv6

Layer 2 switching

GARP VLAN Registration Protocol

QuickSpecs

HP 5500 HI Switch Series

Overview

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 5

allows automatic learning and dynamic assignment of VLANs

IP multicast snooping and data-driven IGMP

automatically prevents flooding of IP multicast traffic

Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping

controls and manages the flooding of multicast packets in a Layer 2 network

32K MAC addresses

provide access to many Layer 2 devices

IEEE 802.1ad QinQ and selective QinQ

increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed
campus or metro network

10GbE port aggregation

allows grouping of ports to increase overall data throughput to a remote device

Spanning Tree/MSTP, RSTP, and STP root guard

prevent network loops

32 MSTP instances

allow multiple configurations of STP per VLAN group

Layer 3 services

Loopback interface address

defines an address in Routing Information Protocol (RIP) and Open Standard Path First (OSPF), improving diagnostic capability

Address Resolution Protocol (ARP)

determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of
duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2
network

Dynamic Host Configuration Protocol (DHCP)

simplifies the management of large IP networks and supports client and server; DHCP Relay enables DHCP operation across
subnets

User Datagram Protocol (UDP) helper function

allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents
server spoofing for UDP services such as DHCP

Layer 3 routing

IPv4 routing protocols

support static routes, RIP, OSPF, ISIS, and BGP

IPv6 routing protocols

provide routing of IPv6 at wire speed; support static routes, RIPng, OSPFv3, IS-ISv6, and BGP4+ for IPv6

PIM-SSM, PIM-DM, and PIM-SM (for IPv4 and IPv6)

support IP Multicast address management and inhibition of DoS attacks

MPLS support

provides extended support of MPLS, including MPLS VPNs and MPLS Traffic Engineering (MPLS TE)

Virtual Private LAN Service (VPLS)

establishes point-to-multipoint Layer 2 VPNs across a provider network

Bidirectional Forwarding Detection (BFD)

enables link connectivity monitoring and reduces network convergence time for RIP, OSPF, BGP, IS-IS, VRRP, MPLS, and IRF

Policy-based routing

makes routing decisions based on policies set by the network administrator

Equal-Cost Multipath (ECMP)

enables multiple equal-cost links in a routing environment to increase link redundancy and scale bandwidth

QuickSpecs

HP 5500 HI Switch Series

Overview

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 6

IPv6 tunneling

allows a smooth transition from IPv4 to IPv6 by encapsulating IPv6 traffic over an existing IPv4 infrastructure

Security

Access control lists (ACLs)

provide IP Layer 2 to Layer 4 traffic filtering; support global ACL, VLAN ACL, port ACL, and IPv6 ACL; up to 6144 ingress ACLs and
1024 egress ACLs are supported

IEEE 802.1X

defines an industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a
RADIUS server

MAC-based authentication

authenticates the client with the RADIUS server based on the client's MAC address

Identity-driven security and access control

Per-user ACLs

permit or deny user access to specific network resources based on user identity and time of day, allowing multiple types
of users on the same network to access specific network services without risking network security or providing
unauthorized access to sensitive data

Automatic VLAN assignment

assigns users automatically to the appropriate VLAN based on their identities

Port security

allows access only to specified MAC addresses, which can be learned or specified by the administrator

Secure FTP

allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch
configuration file

STP BPDU port protection

blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks

DHCP protection

blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks

DHCP snooping

helps ensure that DHCP clients receive IP addresses from authorized DHCP servers and maintain a list of DHCP entries for trusted
ports; prevents reception of fake IP addresses and reduces ARP attacks, improving security

DHCPv6 snooping

ensures that DHCPv6 clients obtain IPv6 addresses from authorized DHCPv6 servers and record IP-to-MAC mappings of DHCPv6
clients

Dynamic ARP protection

blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data

STP root guard

protects the root bridge from malicious attacks or configuration mistakes

Guest VLAN

provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X

Port isolation

secures and adds privacy, and prevents malicious attackers from obtaining user information

IP source guard

helps prevent IP spoofing attacks

IPv6 source guard

help prevent IPv6 spoofing attacks using ND Snooping as well as DHCPv6 Snooping

ND Snooping

allows only packets with a legally obtained IPv6 address to pass

Endpoint Admission Defense (EAD)

QuickSpecs

HP 5500 HI Switch Series

Overview

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 7

provides security policies to users accessing a network

RADIUS/HWTACACS

eases switch management security administration by using a password authentication server

Secure management access

delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2 and SNMPv3

Unicast Reverse Path Forwarding (URPF)

allows normal packets to be forwarded correctly, but discards the attaching packet due to lack of reverse path route or incorrect
inbound interface; prevents source spoofing and distributed attacks; supports distributed UFPF

Convergence

LLDP-MED (Media Endpoint Discovery)

defines a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure
network devices such as IP phones

Internet Group Management Protocol (IGMP)

utilizes Any-Source Multicast (ASM) or Source-Specific Multicast (SSM) to manage IPv4 multicast networks; supports IGMPv1, v2,
and v3

Multicast Source Discovery Protocol (MSDP)

allows multiple PIM-SM domains to interoperate; is used for inter-domain multicast applications

Multicast Border Gateway Protocol (MBGP)

allows multicast traffic to be forwarded across BGP networks and kept separate from unicast traffic

Multicast VLAN

allows multiple VLANs to receive the same IPv4 or IPv6 multicast traffic, lessening network bandwidth demand by reducing or
eliminating multiple streams to each VLAN

LLDP-CDP compatibility

receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation

Additional information

Green initiative support

provides support for RoHS and WEEE regulations

Green IT and power

improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes
variable-speed fans, reducing energy costs

Warranty and support

Lifetime Warranty 2.0

advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)†

Electronic and telephone support (for Lifetime Warranty 2.0)

limited 24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone
support is available from HP for the entire warranty period; to reach our support centers, refer to

www.hp.com/networking/contact-support

; for details on the duration of support provided with your product purchase, refer to

www.hp.com/networking/warrantysummary

Software releases

to find software for your product, refer to

www.hp.com/networking/support

; for details on the software releases available with

your product purchase, refer to

www.hp.com/networking/warrantysummary

†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance
replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP
Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765 zl Mobility Controller

QuickSpecs

HP 5500 HI Switch Series

Overview

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 8

and HP Survivable Branch Communication zl Module powered by Microsoft® Lync has a five-year hardware warranty. For details, refer
to the Software license and hardware warranty statements at

www.hp.com/networking/warranty

.

QuickSpecs

HP 5500 HI Switch Series

Overview

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 9

Build To Order:

BTO is a standalone unit with no integration. BTO products ship standalone are not part of a CTO or Rack-Shippable solution.

Switch Chassis

HP 5500-24G-4SFP HI Switch with 2 interface Slots

JG311A

24 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports(min=0 \ max=4 SFP Transceivers)
2 SFP+ ports(min=0 \ max=2 SFP+ Transceivers)
2 port expansion module slots
Must select min 1 power supply
1U - Height

HP 5500-24G-SFP HI Switch w/2 Intf Slt

JG543A

4 RJ-45 autosensing 10/100/1000 ports
24 SFP fixed Gigabit Ethernet SFP ports (min=0 \ max=24 SFP Transceivers)
2 fixed SFP+ ports (min=0 \ max=2 SFP+ Transceivers)
2 open module slots, or a combination
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2

ration Note:1, 2

HP 5500-24G-PoE+-4SFP HI Switch w/2 Slt

JG541A

24 RJ-45 autosensing 10/100/1000 PoE+ ports
4 SFP fixed Gigabit Ethernet SFP ports (min=0 \ max=4 SFP Transceivers)
2 SFP+ ports (min=0 \ max=2 SFP+ Transceivers)
2 port expansion module slots
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2

HP 5500-48G-4SFP HI Switch with 2 interface Slots

JG312A

48 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports(min=0 \ max=4 SFP Transceivers)
2 SFP+ ports(min=0 \ max=2 SFP+ Transceivers)
2 port expansion module slots
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2

HP 5500-48G-PoE+-4SFP HI Switch w/2 Slt

JG542A

48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 SFP fixed Gigabit Ethernet SFP ports (min=0 \ max=4 SFP Transceivers)
2 SFP+ ports (min=0 \ max=2 SFP+ Transceivers)
2 port expansion module slots
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2

Configuration Rules:

Note 1

The following Transceivers install into this Switch: (SFP Ports)

QuickSpecs

HP 5500 HI Switch Series

Configuration

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 10

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

HP X120 1G SFP LC BX 10-U Transceiver

JD098B

HP X120 1G SFP LC BX 10-D Transceiver

JD099B

HP X115 100M SFP LC BX 10-U Transceiver

JD100A

HP X115 100M SFP LC BX 10-D Transceiver

JD101A

HP X110 100M SFP LC LH40 Transceiver

JD090A

HP X110 100M SFP LC LH80 Transceiver

JD091A

HP X115 100M SFP LC FX Transceiver

JD102B

HP X110 100M SFP LC LX Transceiver

JD120B

Note 2

The following Transceivers install into this Switch: (SFP Ports)
HP X130 10G SFP+ LC SR Transceiver

JD092B

HP X130 10G SFP+ LC LRM Transceiver

JD093B

HP X130 10G SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable

JC784C

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

HP X120 1G SFP LC BX 10-U Transceiver

JD098B

HP X120 1G SFP LC BX 10-D Transceiver

JD099B

Box Level Integration CTO Models

CTO Solution Sku

HP 55xx CTO Switch Solution

SSP trigger sku

JG506A

CTO Switch Chassis

HP 5500-24G-4SFP HI Switch with 2 interface Slots

JG311A

QuickSpecs

HP 5500 HI Switch Series

Configuration

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 11

24 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports(min=0 \ max=4 SFP Transceivers)
2 SFP+ ports(min=0 \ max=2 SFP+ Transceivers)
2 port expansion module slots
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2, 10

HP 5500-24G-SFP HI Switch w/2 Intf Slt

JG543A

4 RJ-45 autosensing 10/100/1000 ports
24 SFP fixed Gigabit Ethernet SFP ports (min=0 \ max=24 SFP Transceivers)
2 fixed SFP+ ports (min=0 \ max=2 SFP+ Transceivers)
2 open module slots, or a combination
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2, 10

HP 5500-24G-PoE+-4SFP HI Switch w/2 Slt

JG541A

24 RJ-45 autosensing 10/100/1000 PoE+ ports
4 SFP fixed Gigabit Ethernet SFP ports (min=0 \ max=4 SFP Transceivers)
2 SFP+ ports (min=0 \ max=2 SFP+ Transceivers)
2 port expansion module slots
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2, 10

HP 5500-48G-4SFP HI Switch with 2 interface Slots

JG312A

48 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports(min=0 \ max=4 SFP Transceivers)
2 SFP+ ports(min=0 \ max=2 SFP+ Transceivers)
2 port expansion module slots
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2, 10

HP 5500-48G-PoE+-4SFP HI Switch w/2 Slt

JG542A

48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 SFP fixed Gigabit Ethernet SFP ports (min=0 \ max=4 SFP Transceivers)
2 SFP+ ports (min=0 \ max=2 SFP+ Transceivers)
2 port expansion module slots
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2, 10

Configuration Rules:

Note 1

The following Transceivers install into this Switch: (SFP Ports) (Use #0D1 quoted to switch if
switch is CTO) - if applicable

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

HP X120 1G SFP LC BX 10-U Transceiver

JD098B

QuickSpecs

HP 5500 HI Switch Series

Configuration

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 12

HP X120 1G SFP LC BX 10-D Transceiver

JD099B

HP X115 100M SFP LC BX 10-U Transceiver

JD100A

HP X115 100M SFP LC BX 10-D Transceiver

JD101A

HP X110 100M SFP LC LH40 Transceiver

JD090A

HP X110 100M SFP LC LH80 Transceiver

JD091A

HP X115 100M SFP LC FX Transceiver

JD102B

HP X110 100M SFP LC LX Transceiver

JD120B

Note 2

The following Transceivers install into this Switch: (SFP Ports) (Use #0D1 quoted to switch if
switch is CTO) - if applicable

HP X130 10G SFP+ LC SR Transceiver

JD092B

HP X130 10G SFP+ LC LRM Transceiver

JD093B

HP X130 10G SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable

JC784C

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

HP X120 1G SFP LC BX 10-U Transceiver

JD098B

HP X120 1G SFP LC BX 10-D Transceiver

JD099B

Note 10

If the Switch Chassis is to be Factory Integrated (CTO), Then the #0D1 is required on the Switch Chassis and
integrated to the JG506A - HP 55xx CTO Switch Solution. (Min 1/Max 1 Switch per SSP)

Rack Level Integration CTO Models

Switch Chassis

HP 5500-24G-4SFP HI Switch with 2 interface Slots

JG311A

24 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports(min=0 \ max=4 SFP Transceivers)
2 SFP+ ports(min=0 \ max=2 SFP+ Transceivers)
2 port expansion module slots
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2, 10

HP 5500-24G-SFP HI Switch w/2 Intf Slt

JG543A

QuickSpecs

HP 5500 HI Switch Series

Configuration

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 13

4 RJ-45 autosensing 10/100/1000 ports
24 SFP fixed Gigabit Ethernet SFP ports (min=0 \ max=24 SFP Transceivers)
2 fixed SFP+ ports (min=0 \ max=2 SFP+ Transceivers)
2 open module slots, or a combination
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2, 10

HP 5500-24G-PoE+-4SFP HI Switch w/2 Slt

JG541A

24 RJ-45 autosensing 10/100/1000 PoE+ ports
4 SFP fixed Gigabit Ethernet SFP ports (min=0 \ max=4 SFP Transceivers)
2 SFP+ ports (min=0 \ max=2 SFP+ Transceivers)
2 port expansion module slots
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2, 10

HP 5500-48G-4SFP HI Switch with 2 interface Slots

JG312A

48 RJ-45 autosensing 10/100/1000 ports
4 fixed Gigabit Ethernet SFP ports(min=0 \ max=4 SFP Transceivers)
2 SFP+ ports(min=0 \ max=2 SFP+ Transceivers)
2 port expansion module slots
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2, 10

HP 5500-48G-PoE+-4SFP HI Switch w/2 Slt

JG542A

48 RJ-45 autosensing 10/100/1000 PoE+ ports
4 SFP fixed Gigabit Ethernet SFP ports (min=0 \ max=4 SFP Transceivers)
2 SFP+ ports (min=0 \ max=2 SFP+ Transceivers)
2 port expansion module slots
Must select min 1 power supply
1U - Height

See Configuration

Note:1, 2, 10

Configuration Rules:

Note 1

The following Transceivers install into this Switch: (SFP Ports) (Use #0D1 quoted to switch if
switch is CTO) - if applicable

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

HP X120 1G SFP LC BX 10-U Transceiver

JD098B

HP X120 1G SFP LC BX 10-D Transceiver

JD099B

HP X115 100M SFP LC BX 10-U Transceiver

JD100A

HP X115 100M SFP LC BX 10-D Transceiver

JD101A

HP X110 100M SFP LC LH40 Transceiver

JD090A

HP X110 100M SFP LC LH80 Transceiver

JD091A

HP X115 100M SFP LC FX Transceiver

JD102B

QuickSpecs

HP 5500 HI Switch Series

Configuration

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 14

HP X110 100M SFP LC LX Transceiver

JD120B

Note 2

The following Transceivers install into this Switch: (SFP+ Ports) (Use #0D1 or #B01 quoted to
switch if switch is CTO) - if applicable

HP X130 10G SFP+ LC SR Transceiver

JD092B

HP X130 10G SFP+ LC LRM Transceiver

JD093B

HP X130 10G SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable

JC784C

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

HP X120 1G SFP LC BX 10-U Transceiver

JD098B

HP X120 1G SFP LC BX 10-D Transceiver

JD099B

Note 10

If HP CTO Switch Chassis is selected for Rack Level Integration, Then the Switch needs to integrate (with #0D1) to
the Rack.

Remarks:

No Rail Kit required

Enter the following menu selections as integrated to the CTO Model X above if order is factory built.

Internal Power Supplies

System (std 0 // max 2) User Selection (min 1 // max 2) per switch enclosure

HP 5500 150WDC Power Supply

JD366A

See Configuration

Note:1

HP 5500 150WAC Power Supply

JD362A

includes 1 x c13, 150w

See Configuration

Note:1, 2

PDU Cable NA/MEX/TW/JP

JD362A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

JD362A#B2C

C15 PDU Jumper Cord (ROW)

QuickSpecs

HP 5500 HI Switch Series

Configuration

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 15

HP X362 720W AC PoE Power Supply

JG544A

includes 1 x c13, 720w

See Configuration

Note:2, 3, 4

PDU Cable NA/MEX/TW/JP

JG544A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

JG544A#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

JG544A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

HP X362 1110W AC PoE Power Supply

JG545A

includes 1 x c13, 1100w

See Configuration

Note:2, 3, 4

PDU Cable NA/MEX/TW/JP

JG545A#B2B

C15 PDU Jumper Cord (NA/MEX/TW/JP)

PDU Cable ROW

JG545A#B2C

C15 PDU Jumper Cord (ROW)

High Volt Switch to Wall Power Cord

JG545A#B2E

NEMA L6-20P Cord (NA/MEX/JP/TW)

Configuration Rules

:

Note 1

This power supply only supported on JG311x, JG312x, JG543x and JG681A Only.

Note 2

Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization Menu)
REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable
option on the Switches/Routers.

Note 3

If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for
switch . (Offered only in AMS, Taiwan, and Japan)

Note 4

This power supply only supported on JG541x, JG542x, JG679A and JG680A Only.

Remarks:

Drop down under power supply should offer the following options and results:
Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and
Japan or #B2C ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch/Router/Power Supply to Wall Power Cord - Localized Option (Watson Default for BTO and
Box Level CTO)
High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North
America, Mexico, Taiwan, and Japan)

QuickSpecs

HP 5500 HI Switch Series

Configuration

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 16

NOTE* DC Power Supply does not require Localization (CLIC Rule to not require looking for
Localization)
NOTE* Mixing of power supplies is supported

Modules

System (std 0 // max 2) User Selection (min 0 // max 2)

HP 5500 2-port 10GbE XFP Module

JD359B

min=0 \ max=2 XFP Transceivers

See Configuration

Note:2, 6, 7

HP 5500 2-port 10GbE Local Connect Mod

JD360B

min=0 \ max=2 CX4 Cables

See Configuration

Note:4, 6, 7

HP 5500 1-port 10GbE XFP Module

JD361B

min=0 \ max=2 SFP+ Transceivers

See Configuration

Note:2, 6, 7

HP 5500/5120 2-port 10GbE SFP+ Module

JD368B

min=0 \ max=2 SFP+ Transceivers

See Configuration

Note:1, 6, 7

HP 5500/4800 2-port GbE SFP Module

JD367A

min=0 \ max=2 SFP Transceivers

See Configuration

Note:3, 6, 7

HP 5500 8-port Gig-T Module

JG313A

No Transceivers

See Configuration

Note:5, 6, 7

HP 5500 8-port SFP Module

JG314A

min=0 \ max=8 SFP Transceivers

See Configuration

Note:3, 5, 6, 7

HP 5500/5120 2p 10GBASE-T Module

JG535A

No Transceivers

See Configuration

Note:6, 7

Configuration Rules

:

Note 1

The following Transceivers install into this Module:
HP X130 10G SFP+ LC SR Transceiver

JD092B

HP X130 10G SFP+ LC LRM Transceiver

JD093B

QuickSpecs

HP 5500 HI Switch Series

Configuration

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 17

HP X130 10G SFP+ LC LR Transceiver

JD094B

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable

JC784C

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

HP X120 1G SFP LC BX 10-U Transceiver

JD098B

HP X120 1G SFP LC BX 10-D Transceiver

JD099B

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X125 1G SFP LC LH70 Transceiver

JD063B

Note 2

The following Transceivers install into this Module:
HP X135 10G XFP LC ER Transceiver

JD121A

HP X130 10G XFP LC LR Single Mode 10km 1310nm Transceiver

JD108B

HP X130 10G XFP LC SR Transceiver

JD117B

Note 3

The following Transceivers install into this Module:

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X120 1G SFP RJ45 T Transceiver

JD089B

HP X120 1G SFP LC BX 10-U Transceiver

JD098B

HP X120 1G SFP LC BX 10-D Transceiver

JD099B

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X125 1G SFP LC LH70 Transceiver

JD063B

HP X115 100M SFP LC BX 10-U Transceiver

JD100A

HP X115 100M SFP LC BX 10-D Transceiver

JD101A

HP X110 100M SFP LC LH40 Transceiver

JD090A

HP X110 100M SFP LC LH80 Transceiver

JD091A

HP X115 100M SFP LC FX Transceiver

JD102B

HP X110 100M SFP LC LX Transceiver

JD120B

Note 4

The following Cables install into this Module: (Use #B01 if switch is CTO)
HP X230 Local Connect 50cm CX4 Cable

JD363B

HP X230 Local Connect 100cm CX4 Cable

JD364B

HP X230 CX4 to CX4 3m Cable

JD365A

Note 5

If this module is installed in the JG311A, JG543A, or JG541A, or JG680A Then the max = 1. Installs
in Slot 1.

QuickSpecs

HP 5500 HI Switch Series

Configuration

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 18

Note 6

If factory intergrated into the switch, This Module must be ordered as #0D1 when the switch is
not Factory Racked.

Note 7

If factory intergrated into the switch, This Module must be ordered as #B01 when the switch is
Factory Racked (Rack Level Integration CTO).

Transceivers

SFP Transceivers

HP X120 1G SFP LC SX Transceiver

JD118B

HP X120 1G SFP LC LX Transceiver

JD119B

HP X125 1G SFP LC LH70 Transceiver

JD063B

HP X120 1G SFP LC LH40 1550nm XCVR

JD062A

HP X125 1G SFP LC LH40 1310nm XCVR

JD061A

HP X120 1G SFP RJ45 T Transceiver

JD089B

HP X120 1G SFP LC BX 10-U Transceiver

JD098B

HP X120 1G SFP LC BX 10-D Transceiver

JD099B

HP X110 100M SFP LC BX 10-U Transceiver

JD100A

HP X115 100M SFP LC FX Transceiver

JD102B

HP X110 100M SFP LC LX Transceiver

JD120B

HP X110 100M SFP LC BX 10-D Transceiver

JD101A

HP X110 100M SFP LC LH40 Transceiver

JD090A

HP X110 100M SFP LC LH80 Transceiver

JD091A

SFP+ Transceivers

HP X130 10G SFP+ LC ER 40km Transceiver

JG234A

HP X130 SFP+ LC SR Transceiver

JD092B

QuickSpecs

HP 5500 HI Switch Series

Configuration

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 19

HP X130 SFP+ LC LRM Transceiver

JD093B

HP X130 SFP+ LC LR Transceiver

JD094B

HP X240 10G SFP+ SFP+ 0.65m DAC Cable

JD095C

HP X240 10G SFP+ SFP+ 1.2m DAC Cable

JD096C

HP X240 10G SFP+ SFP+ 3m DAC Cable

JD097C

HP X240 10G SFP+ SFP+ 5m DAC Cable

JG081C

HP X240 10G SFP+ 7m DAC Cable

JC784C

XFP Transceivers

HP X130 10G XFP LC LR 1310nm Transceiver

JD108B

HP X130 LC SR XFP Transceiver

JD117B

HP X135 10G XFP LC ER Transceiver

JD121A

Cables

Local Connect Cables

HP X230 Local Connect 50cm CX4 Cable

JD363B

HP X230 Local Connect 100 cm CX4 Cable

JD364B

HP X230 CX4 to CX4 3m Cable

JD365A

Multi-Mode Cables

HP .5m Multi-mode OM3 LC/LC FC Cable

AJ833A

HP 1m Multi-mode OM3 LC/LC FC Cable

AJ834A

HP 2 m Multimode OM3 LC/LC FC Cable

AJ835A

HP 5 m Multimode OM3 LC/LC FC Cable

AJ836A

HP 15 m Multimode OM3 LC/LC FC Cable

AJ837A

HP 30 m Multimode OM3 LC/LC FC Cable

AJ838A

QuickSpecs

HP 5500 HI Switch Series

Configuration

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 20

HP 50 m Multimode OM3 LC/LC FC Cable

AJ839A

HP Premier Flex LC/LC OM4 2f 1m Cbl

QK732A

HP Premier Flex LC/LC OM4 2f 2m Cbl

QK733A

HP Premier Flex LC/LC OM4 2f 5m Cbl

QK734A

HP Premier Flex LC/LC OM4 2f 15m Cbl

QK735A

HP Premier Flex LC/LC OM4 2f 30m Cbl

QK736A

HP Premier Flex LC/LC OM4 2f 50m Cbl

QK737A

QuickSpecs

HP 5500 HI Switch Series

Configuration

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 21

HP 5500-24G-4SFP HI Switch with 2 interface Slots

(JG311A)

Ports

24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE

802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only

4 fixed Gigabit Ethernet SFP ports
2 SFP+ 10GbE ports
2 port expansion module slots
1 RJ-45 serial console port
RJ-45 out-of-band management port
Supports a maximum of 38 autosensing 100/1000 ports, with optional module

Power supplies

2 power supply slots
1 minimum power supply required (ordered separately)

Physical characteristics

Dimensions

17.32(w) x 14.17(d) x 1.72(h) in (44.00 x 36.00 x 4.37 cm) (1U height)

Weight

16.53 lb (7.5 kg), Fully loaded

Memory and processor

1 GB SDRAM, 512 MB flash; packet buffer size: 3 MB

Mounting

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)

Performance

1000 Mb Latency

< 5 µs

10 Gbps Latency

< 3 µs

Throughput

130.9 million pps

Routing/Switching
capacity

176 Gbps

Routing table size

12000 entries (IPv4), 6000 entries (IPv6)

MAC address table size

32000 entries

Environment

Operating temperature

32°F to 122°F (0°C to 50°C)

Operating relative
humidity

5% to 95%, noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

5% to 95%, noncondensing

Acoustic

Low-speed fan: 47.9 dB, High-speed fan: 51.1 dB; ISO 7779

Electrical characteristics

Frequency

50/60 Hz

Maximum heat
dissipation

481 BTU/hr (507.46 kJ/hr)

Maximum power rating

141 W

Notes

Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.

QuickSpecs

HP 5500 HI Switch Series

Technical Specifications

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 22

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; ROHS Compliance; AS/NZS
60950-1; GB 4943

Emissions

EN 55022 Class A; CISPR 22 Class A; EN 55024; ICES-003 Class A; CISPR 24; AS/NZS CISPR 22 Class A; EN
61000-3-2; EN 61000-3-3; GB9254; VCCI-3 CLASS A; VCCI-4 CLASS A; ETSI EN 300 386; FCC Part 15 (CFR

47) CLASS A; YD/T993

Notes

8-port Gig-T and SFP modules (JG313A and JG314A) are supported only in slot 1 of this switch.

Services

3-year, 4-hour onsite, 13x5 coverage for hardware (UV870E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV873E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV876E)
3-year, 24x7 SW phone support, software updates (UV879E)
1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR574E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR575E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR576E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV871E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV874E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV877E)
4-year, 24x7 SW phone support, software updates (UV880E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV872E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV875E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV878E)
5-year, 24x7 SW phone support, software updates (UV881E)
3 Yr 6 hr Call-to-Repair Onsite (UW966E)
4 Yr 6 hr Call-to-Repair Onsite (UW967E)
5 Yr 6 hr Call-to-Repair Onsite (UW968E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR578E)
1-year, 24x7 software phone support, software updates (HR577E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS658E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS659E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS660E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS661E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS662E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS663E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS664E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS665E)

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.

HP 5500-48G-4SFP HI Switch with 2 interface Slots

(JG312A)

Ports

48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE

802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full;

QuickSpecs

HP 5500 HI Switch Series

Technical Specifications

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 23

1000BASE-T: full only
4 fixed Gigabit Ethernet SFP ports
2 SFP+ 10GbE ports
2 port expansion module slots
1 RJ-45 serial console port
1 RJ-45 out-of-band management port
Supports a maximum of 70 autosensing 100/1000 ports, with optional module

Power supplies

2 power supply slots
1 minimum power supply required (ordered separately)

Physical characteristics

Dimensions

17.32(w) x 16.54(d) x 1.72(h) in (44.0 x 42.0 x 4.37 cm) (1U height)

Weight

18.74 lb (8.5 kg)

Memory and processor

1 GB SDRAM, 512 MB flash; packet buffer size: 6 MB

Mounting

Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)

Performance

1000 Mb Latency

< 5 µs

10 Gbps Latency

< 3 µs

Throughput

166.6 million pps

Routing/Switching
capacity

224 Gbps

Routing table size

12000 entries (IPv4), 6000 entries (IPv6)

MAC address table size

32000 entries

Environment

Operating temperature

32°F to 122°F (0°C to 50°C)

Operating relative
humidity

5% to 95%, noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

5% to 95%, noncondensing

Acoustic

Low-speed fan: 48.6 dB, High-speed fan: 57.6 dB; ISO 7779

Electrical characteristics

Frequency

50/60 Hz

Maximum heat
dissipation

651 BTU/hr (686.81 kJ/hr)

Maximum power rating

191 W

Notes

Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; ROHS Compliance; AS/NZS
60950-1; GB 4943

Services

3-year, 4-hour onsite, 13x5 coverage for hardware (HQ080E)
3-year, 4-hour onsite, 24x7 coverage for hardware (HQ081E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (HQ084E)
3-year, 24x7 SW phone support, software updates (HQ083E)

QuickSpecs

HP 5500 HI Switch Series

Technical Specifications

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 24

1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR580E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR581E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (HQ085E)
4-year, 4-hour onsite, 24x7 coverage for hardware (HQ086E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ093E)
4-year, 24x7 SW phone support, software updates (HQ091E)
5-year, 4-hour onsite, 13x5 coverage for hardware (HQ088E)
5-year, 4-hour onsite, 24x7 coverage for hardware (HQ089E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ094E)
5-year, 24x7 SW phone support, software updates (HQ092E)
3 Yr 6 hr Call-to-Repair Onsite (HQ082E)
4 Yr 6 hr Call-to-Repair Onsite (HQ087E)
5 Yr 6 hr Call-to-Repair Onsite (HQ090E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR579E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR583E)
1-year, 24x7 software phone support, software updates (HR582E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS674E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS675E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS676E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS677E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS678E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS679E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS680E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS681E)

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.

HP 5500-24G-PoE+-4SFP HI Switch with 2 Interface Slots

(JG541A)

Ports

RJ-45 autosensing 10/100/1000 PoE+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at PoE+); Media Type: Auto-MDIX; Duplex: 10BASE­T/100BASE-TX: half or full; 1000BASE-T: full only

4 fixed Gigabit Ethernet SFP ports
2 SFP+ 10GbE ports
2 port expansion module slots
1 RJ-45 serial console port
1 RJ-45 out-of-band management port
Supports a maximum of 38 autosensing 100/1000

ports, with optional module

Power supplies

2 power supply slots
1 minimum power supply required (ordered separately)

QuickSpecs

HP 5500 HI Switch Series

Technical Specifications

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 25

Physical characteristics

Dimensions

17.32(w) x 18.11(d) x 1.72(h) in (43.99 x 46 x 4.37 cm) (1U height)

Weight

22.05 lb (10 kg), Fully loaded

Memory and processor

1 GB SDRAM, 512 MB flash; packet buffer size: 3 MB

Mounting

Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

1000 Mb Latency

< 5 µs

10 Gbps Latency

< 3 µs

Throughput

up to 130.9 million pps

Routing/Switching
capacity

176 Gbps

Routing table size

12000 entries (IPv4), 6000 entries (IPv6)

MAC address table size

32000 entries

Environment

Operating temperature

32°F to 122°F (0°C to 50°C)

Operating relative
humidity

5% to 95%, noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

5% to 95%, noncondensing

Acoustic

Low-speed fan: 41.0 dB, High-speed fan: 64.0 dB; ISO 7779

Electrical characteristics

Frequency

50/60 Hz

Maximum heat
dissipation

460 BTU/hr (485.3 kJ/hr)

Maximum power rating

150 W

PoE power

740 W

Notes

Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE power is the maximum power available from the required power supply or
supplies. Device supports 1 or 2 internal modular power supplies. JG544A will
supply up to 435 watts of PoE+ power per installed unit. JG545A will supply up
to 800 watts of PoE+ power per installed unit to the extent needed by the
installation.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; ROHS Compliance; AS/NZS
60950-1; GB 4943

Emissions

EN 55022 Class A; CISPR 22 Class A; EN 55024; ICES-003 Class A; CISPR 24; AS/NZS CISPR 22 Class A; EN
61000-3-2; EN 61000-3-3; GB9254; VCCI-3 CLASS A; VCCI-4 CLASS A; ETSI EN 300 386; FCC Part 15 (CFR

47) CLASS A; YD/T993

Notes

8-port Gig-T and SFP modules (JG313A and JG314A) are supported only in slot 1 of this switch.

Services

3-year, 4-hour onsite, 13x5 coverage for hardware (UV870E)
3-year, 4-hour onsite, 24x7 coverage for hardware (UV873E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (UV876E)
3-year, 24x7 SW phone support, software updates (UV879E)

QuickSpecs

HP 5500 HI Switch Series

Technical Specifications

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 26

1-year, post-warranty, 4-hour onsite, 13x5 coverage for hardware (HR574E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR575E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR576E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UV871E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UV874E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV877E)
4-year, 24x7 SW phone support, software updates (UV880E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UV872E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UV875E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (UV878E)
5-year, 24x7 SW phone support, software updates (UV881E)
3 Yr 6 hr Call-to-Repair Onsite (UW966E)
4 Yr 6 hr Call-to-Repair Onsite (UW967E)
5 Yr 6 hr Call-to-Repair Onsite (UW968E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR578E)
1-year, 24x7 software phone support, software updates (HR577E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS658E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS659E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS660E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS661E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS662E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS663E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS664E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS665E)

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.

HP 5500-48G-PoE+-4SFP HI Switch with 2 Interface Slots

(JG542A)

Ports

48 RJ-45 autosensing 10/100/1000 PoE+ ports; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only

4 fixed Gigabit Ethernet SFP ports
2 SFP+ 10GbE ports
2 port expansion module slots
1 RJ-45 serial console port
1 RJ-45 out-of-band management port
Supports a maximum of 70 autosensing 100/1000 ports, with optional module

Power supplies

2 power supply slots
1 minimum power supply required (ordered separately)

QuickSpecs

HP 5500 HI Switch Series

Technical Specifications

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 27

Physical characteristics

Dimensions

17.32(w) x 18.11(d) x 1.72(h) in (43.99 x 46 x 4.37 cm) (1U height)

Weight

23.15 lb (10.5 kg)

Memory and processor

1 GB SDRAM, 512 MB flash; packet buffer size: 6 MB

Mounting

Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

1000 Mb Latency

< 5 µs

10 Gbps Latency

< 3 µs

Throughput

up to 166.6 million pps

Routing/Switching
capacity

224 Gbps

Routing table size

12000 entries (IPv4), 6000 entries (IPv6)

MAC address table size

32000 entries

Environment

Operating temperature

32°F to 113°F (0°C to 45°C)

Operating relative
humidity

5% to 95%, noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

5% to 95%, noncondensing

Acoustic

Low-speed fan: 43.1 dB, High-speed fan: 66.1 dB; ISO 7779

Electrical characteristics

Frequency

50/60 Hz

Maximum heat
dissipation

666 BTU/hr (702.63 kJ/hr)

Maximum power rating

195 W

PoE power

1440 W

Notes

Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
PoE power is the power supplied by the internal power supply. It is dependent
on the type and quantity of power supplies. Device supports 1 or 2 internal
modular power supplies. JG544A will supply 435 watts of PoE+ power per
installed unit. JG545A will supply up to 800 watts of PoE+ power per installed
unit.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; ROHS Compliance; AS/NZS
60950-1; GB 4943

Emissions

EN 55022 Class A; CISPR 22 Class A; EN 55024; ICES-003 Class A; CISPR 24; AS/NZS CISPR 22 Class A; EN
61000-3-2; EN 61000-3-3; GB9254; VCCI-3 CLASS A; VCCI-4 CLASS A; ETSI EN 300 386; FCC Part 15 (CFR

47) CLASS A; YD/T993

Services

3-year, 4-hour onsite, 13x5 coverage for hardware (HQ080E)
3-year, 4-hour onsite, 24x7 coverage for hardware (HQ081E)
3-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 SW phone support and SW updates (HQ084E)
3-year, 24x7 SW phone support, software updates (HQ083E)
1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware (HR580E)

QuickSpecs

HP 5500 HI Switch Series

Technical Specifications

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 28

1-year, post-warranty, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone support
(HR581E)
Installation with minimum configuration, system-based pricing (UW451E)
4-year, 4-hour onsite, 13x5 coverage for hardware (HQ085E)
4-year, 4-hour onsite, 24x7 coverage for hardware (HQ086E)
4-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ093E)
4-year, 24x7 SW phone support, software updates (HQ091E)
5-year, 4-hour onsite, 13x5 coverage for hardware (HQ088E)
5-year, 4-hour onsite, 24x7 coverage for hardware (HQ089E)
5-year, 4-hour onsite, 24x7 coverage for hardware, 24x7 software phone (HQ094E)
5-year, 24x7 SW phone support, software updates (HQ092E)
3 Yr 6 hr Call-to-Repair Onsite (HQ082E)
4 Yr 6 hr Call-to-Repair Onsite (HQ087E)
5 Yr 6 hr Call-to-Repair Onsite (HQ090E)
1-year, 4-hour onsite, 13x5 coverage for hardware (HR579E)
1-year, 6 hour Call-To-Repair Onsite for hardware (HR583E)
1-year, 24x7 software phone support, software updates (HR582E)
1-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS674E)
1-year, 24x7 software phone support, software updates + 4 hour hardware exchange (HS675E)
3-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS676E)
3-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS677E)
4-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS678E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS679E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS680E)
5-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS681E)

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.

HP 5500-24G-SFP HI Switch with 2 Interface Slots

(JG543A)

Ports

24 fixed Gigabit Ethernet SFP ports
4 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type

100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T:
full only

2 SFP+ 10GbE ports
2 port expansion module slots
1 RJ-45 serial console port
1 RJ-45 out-of-band management port
Supports a maximum of 12 autosensing 10/100/1000 ports, with optional module

Power supplies

2 power supply slots
1 minimum power supply required (ordered separately)

QuickSpecs

HP 5500 HI Switch Series

Technical Specifications

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 29

Physical characteristics

Dimensions

17.32(w) x 14.17(d) x 1.72(h) in (43.99 x 35.99 x 4.37 cm) (1U height)

Weight

16.53 lb (7.5 kg)

Memory and processor

1 GB SDRAM, 512 MB flash; packet buffer size: 3 MB

Mounting

Mounts in an EIA-Standard 19-inch telco rack or equipment cabinet (hardware included)

Performance

1000 Mb Latency

< 5 µs

10 Gbps Latency

< 3 µs

Throughput

up to 130.9 million pps

Routing/Switching
capacity

176 Gbps

Routing table size

12000 entries (IPv4), 6000 entries (IPv6)

MAC address table size

32000 entries

Environment

Operating temperature

32°F to 122°F (0°C to 50°C)

Operating relative
humidity

5% to 95%, noncondensing

Nonoperating/Storage
temperature

-40°F to 158°F (-40°C to 70°C)

Nonoperating/Storage
relative humidity

5% to 95%, noncondensing

Acoustic

Low-speed fan: 48.3 dB, High-speed fan: 54.0 dB

Electrical characteristics

Frequency

50/60 Hz

Maximum heat
dissipation

460 BTU/hr (485.3 kJ/hr)

Maximum power rating

135 W

Notes

Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.

Safety

UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC
60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; FDA 21 CFR Subchapter J; ROHS Compliance; AS/NZS
60950-1; GB 4943

Emissions

EN 55022 Class A; CISPR 22 Class A; EN 55024; ICES-003 Class A; CISPR 24; AS/NZS CISPR 22 Class A; EN
61000-3-2; EN 61000-3-3; GB9254; VCCI-3 CLASS A; VCCI-4 CLASS A; ETSI EN 300 386; FCC Part 15 (CFR

47) CLASS A; YD/T993

Notes

8-port Gig-T and SFP modules (JG313A and JG314A) are supported only in slot 1 of this switch.

Services

Refer to the HP website at:

www.hp.com/networking/services

for details on the service-level
descriptions and product numbers. For details about services and response times in your area, please
contact your local HP sales office.

tr>

Standards and protocols

(applies to all products in series)

BGP

IPv6

RFC 1881 IPv6 Address Allocation Management
RFC 1887 IPv6 Unicast Address Allocation Architecture

QuickSpecs

HP 5500 HI Switch Series

Technical Specifications

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 30

RFC 1657 Definitions of Managed Objects for BGPv4
RFC 1771 BGPv4
RFC 2385 BGP Session Protection via TCP MD5
RFC 2858 BGP-4 Multi-Protocol Extensions

Device management

RFC 1157 SNMPv1/v2c
RFC 1305 NTPv3
RFC 1901 (Community based SNMPv2)
RFC 2452 MIB for TCP6
RFC 2454 MIB for UDP6
RFC 2573 (SNMPv3 Applications)
RFC 2576 (Coexistence between SNMP V1, V2, V3)
RFC 2819 (RMON groups Alarm, Event, History and
Statistics only)
RFC 3410 (Management Framework)
RFC 3416 (SNMP Protocol Operations v2)
RFC 3417 (SNMP Transport Mappings)
HTML and telnet management
Multiple Configuration Files
SNMP v3 and RMON RFC support
SSHv1/SSHv2 Secure Shell

General protocols

IEEE 802.1ad Q-in-Q
IEEE 802.1D MAC Bridges
IEEE 802.1p Priority
IEEE 802.1Q (GVRP)
IEEE 802.1w Rapid Reconfiguration of Spanning Tree
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation (LAG)
IEEE 802.3ae 10-Gigabit Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at PoE+
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.3i 10BASE-T
IEEE 802.3u 100BASE-X
IEEE 802.3x Flow Control
IEEE 802.3z 1000BASE-X
RFC 768 UDP
RFC 791 IP
RFC 792 ICMP
RFC 793 TCP
RFC 854 TELNET
RFC 925 Multi-LAN Address Resolution
RFC 950 Internet Standard Subnetting Procedure
RFC 951 BOOTP
RFC 1058 RIPv1
RFC 1122 Host Requirements
RFC 1141 Incremental updating of the Internet
checksum

RFC 1981 IPv6 Path MTU Discovery
RFC 2080 RIPng for IPv6
RFC 2373 IPv6 Addressing Architecture
RFC 2375 IPv6 Multicast Address Assignments
RFC 2460 IPv6 Specification
RFC 2461 IPv6 Neighbor Discovery
RFC 2462 IPv6 Stateless Address Auto-configuration
RFC 2463 ICMPv6
RFC 2464 Transmission of IPv6 over Ethernet Networks
RFC 2473 Generic Packet Tunneling in IPv6
RFC 2475 IPv6 DiffServ Architecture
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
RFC 2740 OSPFv3 for IPv6
RFC 2893 Transition Mechanisms for IPv6 Hosts and Routers
RFC 2925 Definitions of Managed Objects for Remote
Ping, Traceroute, and Lookup Operations (Ping only)
RFC 3162 RADIUS and IPv6
RFC 3306 Unicast-Prefix-based IPv6 Multicast Addresses
RFC 3307 IPv6 Multicast Address Allocation
RFC 3315 DHCPv6 (client and relay)
RFC 3484 Default Address Selection for IPv6
RFC 3493 Basic Socket Interface Extensions for IPv6
RFC 3513 IPv6 Addressing Architecture
RFC 3542 Advanced Sockets API for IPv6
RFC 3587 IPv6 Global Unicast Address Format
RFC 3596 DNS Extension for IPv6
RFC 3810 MLDv2 for IPv6
RFC 4113 MIB for UDP
RFC 4443 ICMPv6
RFC 4541 IGMP & MLD Snooping Switch

MIBs

RFC 1212 Concise MIB Definitions
RFC 1213 MIB II
RFC 1493 Bridge MIB
RFC 1657 BGP-4 MIB
RFC 1724 RIPv2 MIB
RFC 1757 Remote Network Monitoring MIB
RFC 1850 OSPFv2 MIB
RFC 2012 SNMPv2 MIB for TCP
RFC 2013 SNMPv2 MIB for UDP
RFC 2233 Interface MIB
RFC 2452 IPV6-TCP-MIB
RFC 2454 IPV6-UDP-MIB
RFC 2465 IPv6 MIB
RFC 2466 ICMPv6 MIB
RFC 2571 SNMP Framework MIB
RFC 2572 SNMP-MPD MIB
RFC 2573 SNMP-Target MIB
RFC 2574 SNMP USM MIB
RFC 2618 RADIUS Authentication Client MIB

QuickSpecs

HP 5500 HI Switch Series

Technical Specifications

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 31

RFC 1213 Management Information Base for Network
Management of TCP/IP-based internets
RFC 1256 ICMP Router Discovery Protocol (IRDP)
RFC 1305 NTPv3
RFC 1350 TFTP Protocol (revision 2)
RFC 1519 CIDR
RFC 1542 BOOTP Extensions
RFC 1723 RIP v2
RFC 1812 IPv4 Routing
RFC 1887 An Architecture for IPv6 Unicast Address
Allocation
RFC 2131 DHCP
RFC 2236 IGMP Snooping
RFC 2338 VRRP
RFC 2375 IPv6 Multicast Address Assignments
RFC 2616 Hypertext Transfer Protocol -- HTTP/1.1
RFC 2644 Directed Broadcast Control
RFC 2784 Generic Routing Encapsulation (GRE)
RFC 2865 Remote Authentication Dial In User Service
(RADIUS)
RFC 2866 RADIUS Accounting
RFC 3209 RSVP-TE Extensions to RSVP for LSP Tunnels
RFC 3246 Expedited Forwarding PHB
RFC 3410 Applicability Statements for SNMP
RFC 3414 User-based Security Model (USM) for version 3
of the Simple Network Management Protocol (SNMPv3)
RFC 3415 View-based Access Control Model (VACM) for
the Simple Network Management Protocol (SNMP)
RFC 3417 Transport Mappings for the Simple Network
Management Protocol (SNMP)
RFC 3484 Default Address Selection for Internet
Protocol version 6 (IPv6)
RFC 3493 Basic Socket Interface Extensions for IPv6
RFC 3542 Advanced Sockets Application Program
Interface (API) for IPv6
RFC 3587 IPv6 Global Unicast Address Format
RFC 3596 DNS Extensions to Support IP Version 6
RFC 3623 Graceful OSPF Restart
RFC 3704 Unicast Reverse Path Forwarding (URPF)
RFC 3768 Virtual Router Redundancy Protocol (VRRP)
RFC 3810 Multicast Listener Discovery Version 2
(MLDv2) for IPv6
RFC 4090 Fast Reroute Extensions to RSVP-TE for LSP Tunnels
RFC 4113 Management Information Base for the User
Datagram Protocol (UDP)
RFC 4213 Basic IPv6 Transition Mechanisms
RFC 4443 Internet Control Message Protocol (ICMPv6)
for the Internet Protocol Version 6 (IPv6) Specification
RFC 4762 Virtual Private LAN Service (VPLS) Using Label
Distribution Protocol (LDP) Signaling

802.1r - GARP Proprietary Attribute Registration

RFC 2620 RADIUS Accounting Client MIB
RFC 2665 Ethernet-Like-MIB
RFC 2674 Definitions of Managed Objects for Bridges with Traffic
Classes, Multicast Filtering, and Virtual Extensions
RFC 2737 Entity MIB (Version 2)
RFC 2787 VRRP MIB
RFC 2819 RMON MIB
RFC 2925 Ping MIB
RFC 3414 SNMP-User based-SM MIB
RFC 3415 SNMP-View based-ACM MIB
RFC 4113 UDP MIB

Network management

IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1D (STP)
RFC 1157 SNMPv1
RFC 1212 Concise MIB definitions
RFC 1215 Convention for defining traps for use with the
SNMP
RFC 1757 RMON 4 groups: Stats, History, Alarms and Events
RFC 1901 SNMPv2 Introduction
RFC 1918 Private Internet Address Allocation
RFC 2373 Remote Network Monitoring Management
Information Base for High Capacity Networks
RFC 2571 An Architecture for Describing SNMP
Management Frameworks
RFC 2572 Message Processing and Dispatching for the
Simple Network Management Protocol (SNMP)
RFC 2573 SNMP Applications
RFC 2574 SNMPv3 User-based Security Model (USM)
RFC 2575 SNMPv3 View-based Access Control Model (VACM)
RFC 2576 Coexistence between SNMP versions
RFC 2578 SMIv2
RFC 2581 TCP6
RFC 2819 Remote Network Monitoring Management
Information Base
RFC 2925 Definitions of Managed Objects for Remote
Ping, Traceroute, and Lookup Operations
RFC 3176 sFlow
RFC 3410 Introduction to Version 3 of the
Internet-standard Network Management Framework
RFC 3414 SNMPv3 User-based Security Model (USM)
RFC 3415 SNMPv3 View-based Access Control Model VACM)
ANSI/TIA-1057 LLDP Media Endpoint Discovery
(LLDP-MED)
SNMPv1/v2c/v3

OSPF

RFC 1587 OSPF NSSA
RFC 1850 OSPFv2 Management Information Base (MIB), traps
RFC 2370 OSPF Opaque LSA Option

QuickSpecs

HP 5500 HI Switch Series

Technical Specifications

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 32

Protocol (GPRP)

IP multicast

RFC 2236 IGMPv2
RFC 2710 Multicast Listener Discovery (MLD) for IPv6
RFC 2858 Multiprotocol Extensions for BGP-4
RFC 3376 IGMPv3
RFC 3569 An Overview of Source-Specific Multicast
(SSM)
RFC 3618 Multicast Source Discovery Protocol (MSDP)
RFC 3973 PIM Dense Mode
RFC 4601 PIM Sparse Mode

QoS/CoS

IEEE 802.1P (CoS)
RFC 2474 DSCP DiffServ
RFC 2475 DiffServ Architecture
RFC 2597 DiffServ Assured Forwarding (AF)
RFC 2598 DiffServ Expedited Forwarding (EF)

Security

IEEE 802.1X Port Based Network Access Control
RFC 1492 TACACS+
RFC 1918 Address Allocation for Private Internets
RFC 2865 RADIUS Authentication
RFC 2866 RADIUS Accounting
Access Control Lists (ACLs)
MAC Authentication
Port Security
SSHv2 Secure Shell

QuickSpecs

HP 5500 HI Switch Series

Technical Specifications

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 33

HP 5500 HI Switch Series accessories

Modules

HP 5500 2-port 10GbE XFP Module

JD359B

HP 5500 2-port 10GbE Local Connect Module

JD360B

HP 5500 1-port 10GbE XFP Module

JD361B

HP 5500/4800 2-port GbE SFP Module

JD367A

HP 5500/5120 2-port 10GbE SFP+ Module

JD368B

HP 5500 HI 8-port Gig-T Module

JG313A

HP 5500 HI 8-port SFP Module

JG314A

NEW

HP 5500/5120 2-port 10GBASE-T Module

JG535A

Transceivers

HP X125 1G SFP LC LH40 1310nm Transceiver

JD061A

HP X120 1G SFP LC LH40 1550nm Transceiver

JD062A

HP X125 1G SFP LC LH70 Transceiver

JD063B

HP X120 1G SFP RJ45 T Transceiver

JD089B

HP X110 100M SFP LC LH40 Transceiver

JD090A

HP X110 100M SFP LC LH80 Transceiver

JD091A

HP X130 10G SFP+ LC SR Transceiver

JD092B

HP X130 10G SFP+ LC LRM Transceiver

JD093B

HP X130 10G SFP+ LC LR Transceiver

JD094B

HP X240 10G SFP+ to SFP+ 0.65m Direct Attach Copper Cable

JD095C

HP X240 10G SFP+ to SFP+ 1.2m Direct Attach Copper Cable

JD096C

HP X240 10G SFP+ to SFP+ 3m Direct Attach Copper Cable

JD097C

HP X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable

JG081C

HP X240 10G SFP+ SFP+ 7m Direct Attach Copper Cable

JC784C

HP X120 1G SFP LC BX 10-U Transceiver

JD098B

HP X120 1G SFP LC BX 10-D Transceiver

JD099B

HP X110 100M SFP LC FX Transceiver

JD102B

HP X130 10G XFP LC LR 1310nm Transceiver

JD108B

HP X130 10G XFP LC SR Transceiver

JD117B

HP X120 1G SFP LC SX Transceiver

JD118B

HP X110 100M SFP LC LX Transceiver

JD120B

HP X135 10G XFP LC ER Transceiver

JD121A

HP X120 1G SFP LC LX Transceiver

JD119B

Cables

HP 0.5 m Multimode OM3 LC/LC Optical Cable

AJ833A

HP 1 m Multimode OM3 LC/LC Optical Cable

AJ834A

HP 2 m Multimode OM3 LC/LC Optical Cable

AJ835A

HP 5 m Multimode OM3 LC/LC Optical Cable

AJ836A

HP 15 m Multimode OM3 LC/LC Optical Cable

AJ837A

HP 30 m Multimode OM3 LC/LC Optical Cable

AJ838A

HP 50 m Multimode OM3 LC/LC Optical Cable

AJ839A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable

QK732A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable

QK733A

QuickSpecs

HP 5500 HI Switch Series

Accessories

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 34

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable

QK734A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable

QK735A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable

QK736A

HP Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable

QK737A

HP X230 Local Connect 50cm CX4 Cable

JD363B

HP X230 Local Connect 100cm CX4 Cable

JD364B

HP X230 CX4 to CX4 3m Cable

JD365A

HP 5500-24G-4SFP HI Switch with 2 Interface Slots (JG311A)

HP 5800/5500 150W AC Power Supply

JD362A

HP 5800/5500 150W DC Power Supply

JD366A

HP 5500-48G-4SFP HI Switch with 2 Interface Slots (JG312A)

HP 5800/5500 150W AC Power Supply

JD362A

HP 5800/5500 150W DC Power Supply

JD366A

HP 5500-24G-PoE+-4SFP HI Switch with 2 Interface Slots (JG541A)

HP X362 720W 100-240VAC to 56VDC PoE Power Supply

JG544A

HP X362 1110W 115-240VAC to 56VDC PoE Power Supply

JG545A

HP 5500-48G-PoE+-4SFP HI Switch with 2 Interface Slots (JG542A)

HP X362 720W 100-240VAC to 56VDC PoE Power Supply

JG544A

HP X362 1110W 115-240VAC to 56VDC PoE Power Supply

JG545A

HP 5500-24G-SFP HI Switch with 2 Interface Slots (JG543A)

HP 5800/5500 150W AC Power Supply

JD362A

HP 5800/5500 150W DC Power Supply

JD366A

To learn more, visit:

www.hp.com/networking

© Copyright 2012-2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without
notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or
editorial errors or omissions contained herein.

Microsoft is a U.S. registered trademark of Microsoft Corporation.

QuickSpecs

HP 5500 HI Switch Series

Accessories

DA - 14201 Worldwide — Version 20 — April 15, 2014

Page 35