QuickSpecs
HPE Common Slot Power Supplies
Overview
Page 1
HPE Common Slot Power Supplies
HPE Common Slot (CS) Power Supplies share a common electrical and physical design that allows for hot-swap, tool-less
installation into
options available in multiple input and output options, allowing users to "right
configurations and environments. This flexibility helps to minimize power waste, lower overall energ
power capacity in the data center.
High efficiency options rated for up to 94% (Platinum/Platinum Plus) and up to 96% (Titanium) power efficiency are available
the Common Slot form factor. Most options also support
(PLC) technology. This feature enables each server to communicate identification, location, and power
Intelligent Power Distribution Unit in the rack which can then be shared wi
efficiency in the data center.
HPE Common Slot Platinum Plus Power Supplies
1.
Power Supply Identification Label
4.
Blue C-13 Power Connector (indicates support for HPE Power
Discovery Services)
2. Power LED
5. Power Line Communication Port (requires PLC power cable
for use)
3. Front-Side Revision Control Label
6. Quick-Release Lever
HPE server and storage solutions. The Hewlett Packard Enterprise CS power supplies offer high-efficiency power
-size" a power supply for specific server/storage
y costs, and avoid "trapped"
in
HPE Power Discovery Services via embedded power line communication
-related data to the
th HPE Insight Control to manage power usage and
QuickSpecs
HPE Common Slot Power Supplies
Overview
Page 2
HPE 750W Common Slot -48VDC Power Supply
1. Power Supply Identification Label
5. Power LED
2.
Front-Side Revision Control Label
6.
Quick-Release Lever
3.
Power Input Connector
7.
Power Grounding Connector
4. Power Return Connector
What's New
• New 1500W -48VDC 94% efficient Common Slot power supply options with Phoenix connectors (no support for HPE
Models
HPE Power Supplies
NOTE:
supplies must be of the same output and efficiency rating. If non-matched power
supplies are inserted you will get error
HPE
NOTE:
(blue plug).
HP 750W Common Slot Titanium Hot Plug Power Supply Kit
697581-B21
HPE Common Slot Platinum Plus Power Supply Kits
NOTE:
(blue plug).
HPE 460W Common Slot Platinum Plus Hot Plug Power Supply Kit
656362-B21
HPE 750W Common Slot Platinum Plus Hot Plug Power Supply Kit
656363-B21
HPE 1200W Common Slot Platinum Plus Hot Plug Power Supply Kit
656364-B21
HPE 1500W Common Slot Platinum Plus Power Supply Kit
684532-B21
HPE Common Slot Platinum Power Supplies
NOTE:
(black plug).
HPE 460W Common Slot Platinum Hot Plug Power Supply Kit
739252-B21
HPE 750W Common Slot Platinum Hot Plug Power Supply Kit
739254-B21
Power Discovery Services).
Mixing of power supplies in the same server is not supported. All power
s and operation will fail.
Common Slot Titanium Power Supply Kits
Up to 96% efficiency with support for HPE Power Discovery Services
Up to 94% efficiency with support for HPE Power Discovery Services
Up to 94% efficiency with no support for HPE Power Discovery Services
QuickSpecs
HPE Common Slot Power Supplies
Overview
Page 3
HPE 1200W Common Slot Platinum Hot Plug Power Supply Kit
748287-B21
HPE
NOTE:
(blue plug).
HPE 1200W Common Slot Platinum Hot Plug Power Supply Kit
578322-B21
HPE
NOTE:
HPE 460W Common Slot Gold Hot Plug Power Supply Kit
503296-B21
HPE 750W Common Slot Gold Hot Plug Power Supply Kit
512327-B21
HPE
NOTE: Up to 89% efficiency
HP 1200W Common Slot Silver Hot Plug Power Supply Kit
500172-B21
HPE
HPE 1500W Common Slot 48VDC Hot Plug Power Supply Kit
746708-B21
HPE 750W Common Slot -48VDC Hot Plug Power Supply Kit
NOTE:NOTE: The 750W Common Slot
includ
review the "Related Options" section of this document.
636673-B21
HPE
NOTE: Up to 94% efficiency.
HP 500W Common Slot 277VAC Hot Plug Power Supply Kit
717362-B21
HP 750W Common Slot 277VAC Hot Plug Power Supply Kit
717364-B21
HP 1200W Common Slot 277VAC Hot Plug Power Supply Kit
NOTE:
include a power cord. To select an appropri
please review the "Related Options" section of this document.
717359-B21
HPE
NOTE:
HP 1200W Common Slot 380VDC Hot Plug Power Supply Kit
NOTE:
include a power cord. To select an appropriate power cord for your server,
please review the "Related Options" section of this document.
684539-B21
Common Slot Platinum Power Supplies
Up to 94% efficiency with support for HPE Power Discovery Services
Common Slot Gold Power Supplies
Up to 92% efficiency.
Common Slot Silver Power Supplies
Common Slot -48VDC Power Supplies
-48VDC Hot Plug Power Supply Kit does not
e a power cord. To select an appropriate power cord for your server, please
Common Slot 277VAC Power Supplies
The HPE Common Slot 277VAC Hot Plug Power Supply Kits do not
ate power cord for your server,
Common Slot 380VDC Power Supplies
Up to 94% efficiency.
The 1200W Common Slot 380VDC Hot Plug Power Supply Kit does not
QuickSpecs
HPE Common Slot Power Supplies
Standard Features
Page 4
Common Slot Features
and Benefits
Common Slot Design
Multiple Output and Input
Power Management for Redundant Power Configurations
Titanium and
Platinum/Platinum Plus
Features and Benefits
Highest Rated Power Efficiency
Supports
80Plus Certification
The 80PLUS test protocol was developed jointly by Ecos Plug Load Solutions and the Electric Power
Research Institute (EPRI) in 2003, with the program being formally launched in 2004.
The 80 PLUS performance specification requires power supplies in servers to be 80% or greater energy
efficient at 20%, 50% and 100% of rated load with a true power factor of 0.9 or greater. This makes an
80 PLUS certified power supply substantially more efficient than typical p
other electrical devices.
• Tool-less hot-swap design allows for quick and easy access to power supplies
• Wide range of compatibility across HPE server and storage solutions minimizes the cost and
management effort to maintain different sets of power supply spares
Options
• Multiple output options allowing users to "right-size" their power needs and avoid "trapped"
power capacity in their data centers caused by over-subscribing power needs
• Both AC and DC power input options available providing flexibility to operate in different IT
environments
• Most Common Slot AC power supply options support both low-line and high-line voltage
inputs providing additional flexibility to operate in multiple It environments
• Supports multiple operating modes to maximize power efficiency when configuring servers
and storage with redundant power supplies
• Load-Balancing mode designed to maximize power efficiency at higher power supply
utilization loads
• High-Efficiency mode designed to maximize power efficiency at lower power supply utilization
loads
• Titanium (96%) and Platinum (94%) power efficiency certification from 80Plus program -
highest certifications available in the IT industry
• Minimize data center operating costs related to power by reducing power waste and
requirements for HPE server and storage solutions
the Hewlett Packard Enterprise Power Discovery Services (on most options)
• Creates energy-aware network through embedded power line communication feature in
Platinum power options
• Communicates power-related data to both iPDU and HPE Insight Manager
• Reduces human error, reclaims over-provisioned power capacity, and accurately
measures/monitors power usage
ower supplies found in many
QuickSpecs
HPE Common Slot Power Supplies
Standard Features
Page 5
Who benefits from the 80PLUS power supply program?
What are the efficiency requirements for each cert
80 PLUS Certification
230V Internal
% of Rated Load
20%
50%
100%
80 PLUS Bronze
81%
85%
81%
80 PLUS Silver
85%
89%
85%
80 PLUS Gold 88% 92% 88%
80 PLUS Platinum
90% 94% 91%
80 Plus Titanium*
94% 96% 91%
*The 80 PLUS Titanium specification also requires a minimum of 90% efficiency at 10% utilization.
What level of certification do
Hewlett Packard Enterprise offers
certification,
options meet 80PLUS requirements for Platinum certification. To review 80Plus certification reports for
each
.
NOTE:
80PLUS program; 277VAC, 48VDC, and 380VDC power supplies are tested by
E
Enabling Power
Discovery Services
HPE Power Discovery Services (PDS) combines the HPE Intelligent Power Distribution Unit (iPDU) and
HPE
an automated, energy
HPE
Which
How Is PDS enabled by the Common Slot Platinum/Platinum Plus Power Supply?
HPE
communication (PLC) feature that allows the power supply to communicate server data (such as server
name, UUID, and IP address) to an HPE Intelligent Power Distribution Unit (iPDU). This feature is
• Commercial/Residential Consumers - empowered with information regarding energy efficient
IT options that help them cut energy costs and reduce their environmental impact
• Utility/Power Providers - participation in a program that focuses on reducing power demands
on overburdened grids as well as reducing power waste and its associated environmental
impact
ification level?
HPE Common Slot (CS) Power Supplies meet?
a range of CS Power Supplies that meet various 80PLUS levels of
from Silver to Titanium. The Hewlett Packard Enterprise Platinum Plus power supply
HPE Common Slot Power Supply, please refer to the 80Plus website at: http://www.80plus.org/
Only AC CS Power Supplies operating at between 90V to 264V are tested/certified by the
nterprise for efficiency ratings.
Common Slot Platinum/Platinum Plus power supplies with HPE Insight Control software to create
-aware network between IT systems and facilities.
Power Discovery Services Features and Benefits :
• Captures highly accurate power data across racks and rows of servers in order to identify and
eliminate areas of waste
• Extends the life of the data center by reclaiming up to 3x energy capacity of the data center
• Ensures uptime by eliminating human error during power planning and provisioning
HPE Power Supplies Support IPD?
• HPE Common Slot Platinum Plus Power Supplies (including 460W, 750W, 1200W , and 1500W
options)
• HPE Common Slot Platinum Power Supplies (including 460W, 750W, and 1200W options)
Common Slot Platinum and Platinum Plus Power Supplies include an embedded power line
Hewlett Packard
QuickSpecs
HPE Common Slot Power Supplies
Standard Features
Page 6
supported on most HPE ProLiant G6 and G7 servers that support HPE Common Slot Platinum power
supplies, as well as on new
and Platinum Plus Power Supply options.
NOTE:
Intelligent Power Discovery. Please refer to the
power cord options and part numbers at:
http://h18004.www1.hp.com/products/
To learn more on
http://www.hp.com/go/ipd.
Support for Redundant
Power Sup
An HPE ProLiant server configured with an HPE Common Slot VAC Power Supply (460W, 750W,
1200W, or 1500W) supports the following three power scenarios:
A single Common Slot Power Supply supporting the entire load of the server can achieve the highest
efficiency when operating in the middle range (50%) of its capacity.
For redundant Common Slot Power Supplies
balanced mode (the default mode when
adding redundant power supplies), the load is shared equally between the two (or four) power supplies.
In general, the load
the primary power supply capacity.
When high
under System options -> Redundancy options), each power supply in the server is designated as either
a primary o
allows the primary power supply to operate at higher efficiency points on the load curve while the
secondary power supply operates in idle mode, providing no output
energy (typically two to four watts per supply). The user can also specify that odd or even power
supplies will be designated manually or automatically as secondary supplies. This flexibility allows users
to balance the loa
NOTE:
with redundant power supplies. However, neither model supports high
Compatibility
HPE Common Slot (CS) power supplies are compatible with a wide range HPE server and storage
solutions. To check for CS power supply compatibility with specific
ProLiant Options Compatibility Guide located at:
compatibility with specific
appropriate QuickSpecs for that product.
HPE ProLiant Generation 8 servers supporting HPE Common Slot Titanium
Standard power cables and jumpers do not support Power Line Communications or
HPE iPDU Data Sheet for more information on
QuickSpecs/DS_00193/DS_00193.pdf
HPE Intelligent Power Discovery, please visit the IPD website at:
plies
• Operating with a single supply
• Operating with redundant supplies in load-balanced mode
• Operating with redundant supplies in high-efficiency mode
operating in load-
-balanced mode offers better efficiency for loads requiring more than 60 percent of
-efficiency mode is enabled for redundant supplies (via the server's ROM-based setup utility
r secondary supply, and the entire server load is shifted to the primary power supply. This
d across a rack manually or automatically.
HPE Common Slot VDC Power Supply options support load-balancing when configured
power and consuming very little
-efficiency mode.
HPE ProLiant servers, use the HPE
http://www.hpproliantoptions.com/. For
HPE Integrity servers and HPE Storage solutions, please review the
QuickSpecs
HPE Common Slot Power Supplies
Service and Support
Page 7
Service and Support
NOTE:
Infrastructure
HPE
HPE
s
support technology lets you to tap into the knowledge of millions of devices and thousands of experts
to stay informed and in control, anywhere, any time.
Protect your business beyond warranty with
HPE Pointnext operational services
response time as you purchase your new server, giving you full entitlement for the term you select.
HPE Support Center
Personalized online support portal with access to information, tools and experts to support Hewlett
Packard Enterprise business products
E
http://www.hp.com/go/hpsc
The HPE Support
agent for live sup
HPE
ewlett
P
agreement
*The Hewlett Packard Enterprise Support Center Mobile App is subject to local availability
Parts and materials
Hewlett Packard Enterprise will provide HPE-supported replacement parts and materials necessary to
maintain the
available and recommended engineering improvements.
Parts and components that have reached their maximum supported lifetime and/or the maximum
usage limitations as set forth
technical product data sheet will not be provided, repaired, or replaced as part of these services.
The defective media retention service feature option applies only to Disk or eligible S
replaced by Hewlett Packard Enterprise due to malfunction.
Warranty / Service
Coverage
For ProLiant servers and storage systems, this service covers Hewlett Packard Enterprise-branded
hardware options qualified for the server, purchase
enclosure, as well as external monitors up to 22" and tower UPS products; these items will be covered at
the same service level and for the same coverage period as the server unless the maximum supported
lif
included; standard warranty terms and conditions apply.
The defective media retention service feature option applies only to Disk or eligible SSD/Flash Drives
replaced by
or SSD/Flash Drives that have not failed. SSD/Flash Drives that are specified by
E
maximum usage limit as set forth in the manufacturer's operating manual or the technical data sheet
are not eligible for the defective media retention service feature option.
For more information
To learn more on services for HPE ESSN Options, please contact your Hewlett Packard Enterprise sales
HPE Common Slot power supplies are supported as a part of the HPE Server
. No separate care packs are needed to be purchased.
Technology Services for Industry Standard Servers
Technology Services delivers confidence, reduces risk and helps customers realize agility and
tability. Connect to Hewlett Packard Enterprise to help prevent problems and solve issues faster. Our
HPE Pointnext operational services
enable you to order the right service level, length of coverage and
. Submit support cases online, chat with Hewlett Packard
nterprise experts, access support resources or collaborate with peers. Learn more
Center Mobile App* allows you to resolve issues yourself or quickly connect to an
port. Now, you can get access to personalized IT support anywhere, anytime.
Insight Remote Support and HPE Support Center are available at no additional cost with a H
ackard Enterprise warranty, HPE Care Pack or Hewlett Packard Enterprise contractual support
.
covered hardware product in operating condition, including parts and materials for
in the manufacturer's operating manual, product quick-specs, or the
d at the same time or afterward, internal to the
etime and/or the maximum usage limitation has been exceeded. Coverage of the UPS battery is not
nterprise as consumable parts and/or that have exceeded maximum supported lifetime and/or the
Hewlett Packard Enterprise due to malfunction. It does not apply to any exchange of Disk
SD/Flash Drives
Hewlett Packard
QuickSpecs
HPE Common Slot Power Supplies
Service and Support
Page 8
representative or Hewlett Packard Enterprise Authorized Channel Partner. Or visit:
http://www.hp.com/services/proliant or http://www.hp.com/services/bladesystem
QuickSpecs
HPE Common Slot Power Supplies
Related Options
Page 9
Related Options
Common Slot Power
Supply Enablement Kits
HP DL160 Gen8 FIO Power Backplane Kit
NOTE:
supply, this enablement kit must be used for proper installation. The Common
Slot power supply and power backplane kit for the DL160 Gen8 must be factory
installed and cannot be purchased as separate options.
662959-B21
HP DL320e Gen8 Factory Integrated RPS Enablement Kit
NOTE:
supply, this enablement kit must be used for proper installation. The Common
Slot power supply and enablement kit for the DL320e Gen8 must be factory
installed and cannot be purchased as separate options.
675451-B21
HP 4U Redundant Power Supply Enablement Kit
NOTE:
supply, this enablement kit must be used for proper installation. The Common
Slot power
installed and cannot be purchased as separate options.
675843-B21
HP Redundant Enablement Kit
NOTE:
supply, this kit must be used
supply and enablement kit for the ML350e Gen8 must be factory installed and
cannot be purchased as separate options.
664046-B21
HP 4X1200W RPS FIO Enablement Kit
NOTE:
supply, this kit must be used for proper installation. The Common Slot power
supply and enablement kit for the Ml350p Gen8 must be factory installed and
cannot be purchased as separate options.
659487-B21
VAC C13 to C14 Power
C
HPE C13 - C14 WW 250V 10A Gray 0.7m Jumper Cord
A0K03A
HPE C13 - C14 WW 250V 10A Gray 1.37m Jumper Cord
A0K04A
HPE C13 - C14 WW 250V 10Amp Flint Gray 2.0m Jumper Cord
AF573A
HPE C13 - C14 WW 250V 10A Gray 3.0m Jumper Cord
A0K06A
HPE C13 - C14 WW 250V 10Amp 0.7m Jumper Cord
142257-B28
HPE C13 - C14 WW 250V 10Amp 1.4m Jumper Cord
142257-006
HPE C13 - C14 WW 250V 10Amp 1.4m 15 pc Jumper Cord
142257-007
HPE C13 - C14 WW 250V 10Amp 2.0m Jumper Cord
A0K02A
HPE C13 - C14 WW 250V 10Amp 2.5m Jumper Cord
142257-002
HPE C13 - C14 WW 250V 10Amp 3.0m Jumper Cord
142257-003
NOTE: Standard power cables and jumpers do not support Power Line
When configuring the HPE DL160 Gen 8 with a Common Slot power
When configuring the HPE DL320e Gen 8 with a Common Slot power
When configuring the HPE ML310e Gen 8 with a Common Slot power
supply and enablement kit for the Ml310e Gen8 must be factory
When configuring the HPE ML350e Gen 8 with a Common Slot power
for proper installation. The Common Slot power
When configuring the HPE ML350p Gen 8 with a Common Slot power
ables
QuickSpecs
HPE Common Slot Power Supplies
Related Options
Page 10
Communications or Power Discovery Services.
Power Line
Communication (PLC)
Power Cables
HP C13 - C14 WW 250V 10Amp IPD 0.76m 1pc Jumper Cord
SG506A
HPE C13 - C14 WW 250V 10Amp IPD 0.76m 5pc Jumper Cord
SG507A
HPE C13 - C14 WW 250V 10Amp IPD 1.37m 1pc Jumper Cord
SG508A
HPE C13 - C14 WW 250V 10Amp IPD 1.37m 5pc Jumper Cord
SG509A
HPE C13 - C14 WW 250V 10Amp IPD 1.83m 1pc Jumper Cord
SG510A
HPE C13 - C14 WW 250V 10Amp IPD 1.83m 5pc Jumper Cord
SG511A
HPE C13 - C14 WW 250V 10Amp IPD 3.0m 1pc Jumper Cord
SG512A
277VAC Power Cables
HP LS-26 to LS-25 277 Volt 15Amp AC 0.76m Jumper Cord
TK801A
HPE LS-26 to LS-25 277 Volt 15Amp AC 1.37M Jumper Cord
NOTE:NOTE: This power cord option is for use with the HPE Common Slot 277VAC
Hot Plug Power Supply Kits (717359
TK802A
VDC Power Cables
HPE 1.3M 48V DC Power Cable Kit
A5S97A
HPE 2.5M 48V DC Power Cable Kit
A5S98A
HP 8AWG W/Ground Lug 48V DC 3.0m Power Cord
J6X42A
NOTE:
Common Slot
needs to be used with 1500W Common Slot -48VDC Power Supply (746708-B21).
NOTE:
cords/cable part numbers, input/output descriptions:
http://www.hp.com/go/powercordmatrix
-B21, 717362-B21, and 717364-B21).
The VDC cable options listed above can only be used with the HPE 750W
-48VDC Power Supply (636673-B21) excluding J6X42A which
Please refer to the Power Cord Matrix for more information on power
.
QuickSpecs
HPE Common Slot Power Supplies
Power Specifications
Page 11
HP 750W Common Slot Titanium Hot Plug Power
Supply Kit (697581
HPE Generic Part Number
697579-001
HPE
Input Voltage Range ( V rms ) 200 - 240
Frequency Range (Nominal) ( Hz )
50 - 60
Nominal Input Voltage ( Vrms )
200
208
220
230
240
Maximum Rated Output Wattage Rating
750
750
750
750
750
Nominal Input Current ( A rms )
4.0
3.9
3.7
3.5
3.3
Maximum Rated Input Wattage Rating ( Watts )
803 802 800
799
798
Maximum Rated VA ( Volt-Amp )
806 805 804
803
803
Efficiency ( % )
93.4
93.5
93.7
93.8
93.9
Power Factor
0.996
0.995
0.996
0.995
0.994
Leakage Current ( mA )
0.50
0.75
0.79
0.83
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS ) 0.2
Maximum British Thermal Unit Rating ( BTU-Hr )
2739
2735 2731
2728
2724
HPE 460W Common Slot Platinum Plus Hot Plug
Power Supply Kit (656362
HPE Generic Part Number
643931
HPE Spares Part Number
660184
Input Voltage Range ( V rms )
100
Frequency Range (Nominal) ( Hz )
50
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
460
460
HPE Generic Part Number
643931-001
HPE
-B21)
Spares Part Number
700287-001
-B21)
-001
-001
- 240
- 60
Spares Part Number
660184-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 12
460
460
460
460
460
Nominal Input Current ( A rms )
5.2
4.3
2.5
2.4
2.3
2.2
2.1
Maximum Rated Inp
517
509
496
496
495
495
494
Maximum Rated VA ( Volt
524
515
503
502
502
501
500
Efficiency ( % )
89.0
90.4
92.7
92.8
92.9
93.0
93.1
Power Factor
0.998
Leakage Current ( mA )
0.42
0.50
ut Wattage Rating ( Watts )
-Amp )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 13
0.83
0.87
0.92
0.96
1.00
Maximum
30
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU
1764
1736
1694
1692
1689
1687
1686
Input Voltage Range ( V rms )
100 - 240
Frequency Range (Nominal) ( Hz )
50 - 60
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
460
460
460
460
460
460
460
Nominal Input Current ( A rms )
5.2 4.3 2.5 2.4 2.3 2.2 2.1
Maximum Rated Input Wattage Rating ( Watts )
517 509 496 496 495 495 494
Maximum Rated VA ( Volt-Amp )
524
515
503
502
502
501
500
Efficiency ( % )
89.0
90.4
92.7
92.8
92.9
93.0
93.1
Power Factor
0.998
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS ) 20
Maximum British Thermal Unit Rating ( BTU-Hr )
1764
1736
1694
1692
1689
1687
1686
HPE 750W Common Slot Platinum Plus Hot Plug
Power Supply Kit (656363
HPE Generic Part
643932
HPE Spares Part Number
660183
Input Voltage Range ( V rms )
HPE
HPE Spares Part Number
660183-001
Inrush Current ( A peak )
-Hr )
-001
-001
Number
-B21)
Generic Part Number
643932-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 14
100
Frequency Range (Nominal) ( Hz )
50
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
750
750
750
750
750
7
750
Nominal Input Current ( A rms )
8.5
7.0
4.1
3.9
3.7
3.6
3.5
Maximum Rated Input Wattage Rating ( Watts )
843
831
811
811
809
808
821
Maximum Rated VA ( Volt
855
842
822
821
820
819
- 240
50
- 60
-Amp )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 15
832
Efficiency ( % )
88.9
90.3
92.4
92.5
92.7
92.8
91.3
P
0.998
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU
2878
2834
2769
2766
2762
2758
2803
Input Voltage Range ( V rms )
100 - 240
Frequency Range (Nominal) ( Hz )
50 - 60
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
750 750 750 750 750 750 750
Nominal Input Current ( A rms )
8.5 7.0 4.1 3.9 3.7 3.6 3.5
Maximum Rated Input Wattage Rating ( Watts )
843
831
811
811
809
808
821
Maximum Rated VA ( Volt-Amp )
855
842
822
821
820
819
832
Efficiency ( % )
88.9
90.3
92.4
92.5
92.7
92.8
91.3
ower Factor
-Hr )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 16
Power Factor
0.998
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS ) 20
Maximum British Thermal Unit Rating ( BTU-Hr )
2878 2834
2769
2766
2762 2758
2803
HPE 1200W Common Slot Platinum Plus Hot Plug
Power Supply Kit (656364
HPE Generic Part Number
643933
HPE Spares Part Number
660185
Input Voltage Range ( V rms )
100
Frequency Range (Nominal) ( Hz )
50
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
800
900
1200
1200
1200
1200
1200
Nominal Input Current ( A rms )
9.1
8.4
6.7
6.4
6.1
5.8
5.5
HPE
HPE Spares Part Number
660185-001
-B21)
-001
-001
- 240
- 60
Generic Part Number
643933-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 17
Maximum Rated Input Wattage Rating ( Watts )
897
999
1321
1319
1317
1315
1314
Maximum Rated VA
909
1012
1338
1337
1334
1332
1331
Efficiency ( % )
89.2
90.1
90.9
91.0
91.1
91.2
91.3
Power Factor
0.998
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS
20
Maximum British Thermal Unit Rating ( BTU
3061
( Volt-Amp )
)
-Hr )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 18
3408
4506
4501
4493
4487
4483
Input Voltage Range ( V rms )
100 - 240
Frequency Range (Nominal) ( Hz ) 50 - 60
Nominal Input Voltage ( Vrms )
100 120 200 208 220 230 240
Maximum Rated Output Wattage Rating
800
900
1200
1200
1200
1200
1200
Nominal Input Current ( A rms )
9.1
8.4
6.7
6.4
6.1
5.8
5.5
Maximum Rated Input Wattage Rating ( Watts )
897
999
1321
1319
1317
1315
1314
Maximum Rated VA ( Volt-Amp )
909
1012
1338
1337
1334
1332
1331
Efficiency ( % )
89.2
90.1
90.9
91.0
91.1
91.2
91.3
Power Factor
0.998
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU-Hr )
3061
3408
4506
4501
4493
4487
4483
HPE 1500W Common Slot Platinum Plus Power
Supply Kit (684532
HPE Generic Part Number
684529
HPE Spares Part Number
704604
Inp
200
Frequency Range (Nominal) ( Hz )
50
Nominal Input Voltage ( Vrms )
200
208
220
230
240
Maximum Rated Output Wattage Rating
1500
HPE Generic Part Number
684529-001
HPE
-B21)
-001
-001
ut Voltage Range ( V rms )
- 240
- 60
Spares Part Number
704604-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 19
1500
1500
1500
1500
Nominal Input Current ( A rms )
8.4
8.1
7.6
7.3
7.0
Maximum R
1661
1659
1655
1652
1649
Maximum Rated VA ( Volt
1681
1679
1675
1672
1669
Efficiency ( % )
90.3
90.4
90.6
90.8
91.0
Power Factor
0.999
0.999
0.999
0.999
0.999
Leakage Current ( mA )
0.50
0.75
0.79
0.83
1.00
Maximum Inrush Current ( A peak )
ated Input Wattage Rating ( Watts )
-Amp )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 20
40
Maximum Inrush Current duration ( mS )
0.2
Maximum British Thermal Unit Rating ( BTU
5667
5661
5648
5637
5627
Input Voltage Range ( V rms ) 200 - 240
Frequency Range (Nominal) ( Hz ) 50 - 60
Nominal Input Voltage ( Vrms )
200
208
220
230
240
Maximum Rated Output Wattage Rating
1500
1500
1500
1500
1500
Nominal Input Current ( A rms )
8.4
8.1
7.6
7.3
7.0
Maximum Rated Input Wattage Rating ( Watts )
1661
1659
1655
1652
1649
Maximum Rated VA ( Volt-Amp )
1681 1679 1675
1672
1669
Efficiency ( % )
90.3 90.4 90.6
90.8
91.0
Power Factor
0.999
0.999
0.999
0.999
0.999
Leakage Current ( mA )
0.50
0.75
0.79
0.83
1.00
Maximum Inrush Current ( A peak )
40
Maximum Inrush Current duration ( mS )
0.2
Maximum British Thermal Unit Rating ( BTU-Hr )
5667 5661
5648
5637
5627
HPE 460W Common Slot Platinum Hot Plug
Power Supply Kit (739252
HPE Generic Part Number
746071
HPE Spares Part N
742515
Input Voltage Range ( V rms )
100
Frequency Range (Nominal) ( Hz )
50
Nominal Input Voltage ( Vrms )
100
120
200
HPE Generic Part Number
746071-001
HPE
-Hr )
-B21)
-001
-001
- 240
- 60
umber
Spares Part Number
742515-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 21
208
220
230
240
Maximum Rated Output Wattage Rating
460
460
460
460
460
460
460
Nominal Input Current ( A rms
5.2
4.3
2.5
2.4
2.3
2.2
2.1
Maximum Rated Input Wattage Rating ( Watts )
517
509
496
496
495
495
494
Maximum Rated VA ( Volt
524
515
503
502
502
501
500
Efficiency ( % )
89.0
90.4
92.7
92.8
92.9
93.0
)
-Amp )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 22
93.1
Power Factor
0.998
Leakage Current ( m
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU
1764
1736
1694
1692
1689
1687
1686
Input Voltage Range ( V rms )
100 - 240
Frequency Range (Nominal) ( Hz )
50 - 60
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
460
460
460
460
460
460
460
Nominal Input Current ( A rms )
5.2
4.3
2.5
2.4
2.3
2.2
2.1
Maximum Rated Input Wattage Rating ( Watts )
517 509 496 496 495 495 494
Maximum Rated VA ( Volt-Amp )
524
515
503
502
502
501
500
Efficiency ( % )
89.0
90.4
92.7
92.8
92.9
93.0
93.1
Power Factor
0.998
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS ) 20
Maximum British Thermal Unit Rating ( BTU-Hr )
1764
1736
1694
1692
1689
1687
1686
HPE 750W Common Slot Platinum Hot Plug
Pow
HPE Generic Part Number
746072-001
HPE Spares Part Number
742516-001
A )
er Supply Kit (739254-B21)
-Hr )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 23
HPE Generic Part Number
746072
HPE Spares Part Number
742516
Input Voltage Range ( V rms )
100
Frequency Range (Nominal) ( Hz )
50
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated
750
750
750
750
750
750
750
Nominal Input Current ( A rms )
8.5
7.0
4.1
3.9
3.7
3.6
3.5
Maximum Rated Input Wattage Rating ( Watts )
843
831
811
811
809
808
821
-001
-001
- 240
- 60
Output Wattage Rating
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 24
Maximum Rated VA ( Volt
855
842
822
821
820
819
832
Efficiency
88.9
90.3
92.4
92.5
92.7
92.8
91.3
Power Factor
0.998
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU
2878
28
2769
2766
2762
2758
2803
-Amp )
( % )
34
-Hr )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 25
Input Voltage Range ( V rms )
100 - 240
Frequency Range (Nominal) ( Hz )
50 - 60
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
750 750 750 750 750 750 750
Nominal Input Current ( A rms )
8.5 7.0 4.1 3.9 3.7 3.6 3.5
Maximum Rated Input Wattage Rating ( Watts )
843
831
811
811
809
808
821
Maximum Rated VA ( Volt-Amp )
855
842
822
821
820
819
832
Efficiency ( % )
88.9
90.3
92.4
92.5
92.7
92.8
91.3
Power Factor
0.998
Leakage Current ( mA )
0.42 0.50 0.83 0.87 0.92 0.96 1.00
Maximum Inrush Current ( A peak ) 30
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU-Hr )
2878
2834
2769
2766
2762
2758
2803
HPE 1200W Common Slot Platinum Hot Plug
Power Supply Kit (748287
HPE Generic Part Number
746073
HPE Spares Part Number
748896
Input Voltage Range ( V rms )
100
Frequency Range (Nominal) ( Hz )
5
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
800
900
1200
1200
1200
1200
1200
HPE Generic Part Number
746073-001
HPE
-B21)
-001
-001
- 240
0 - 60
Spares Part Number
748896-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 26
Nominal Input Current ( A rms )
9.1
8.4
6.7
6.4
6.1
5.8
5.5
Maximum Rated Input Wattage Rating ( Watts )
897
999
1321
1319
1317
1315
1314
Maximum Rated VA ( Volt
909
1012
1338
1337
1334
1332
1331
Efficiency ( % )
89.2
90.1
90.9
91.0
91.1
91.2
91.3
Power Factor
0.998
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
-Amp )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 27
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU
3061
3408
4506
4501
4493
4487
4483
Input Voltage Range ( V rms )
100 - 240
Frequency Range (Nominal) ( Hz )
50 - 60
Nominal Input Voltage ( Vrms )
100 120 200 208 220 230 240
Maximum Rated Output Wattage Rating
800
900
1200
1200
1200
1200
1200
Nominal Input Current ( A rms )
9.1
8.4
6.7
6.4
6.1
5.8
5.5
Maximum Rated Input Wattage Rating ( Watts )
897
999
1321
1319
1317
1315
1314
Maximum Rated VA ( Volt-Amp )
909
1012
1338
1337
1334
1332
1331
Efficiency ( % )
89.2
90.1
90.9
91.0
91.1
91.2
91.3
Power Factor
0.998
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU-Hr )
3061
3408
4506
4501
4493
4487
4483
HPE 1200W Common Slot Platinum Hot Plug
Power Supply Kit (578322
HPE Generic Part Number
570451
HPE Spares Part Number
579229
Input Voltage Range ( V rms )
100
Frequency Range (Nominal) ( Hz )
50
Nominal Input Voltage ( Vrms )
HPE Generic Part Number
570451-101
HPE
-Hr )
-B21)
-101
-001
- 240
- 60
Spares Part Number
579229-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 28
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
800
900
1200
1200
1200
1200
1200
Nomi
9.3
8.6
6.7
6.5
6.1
5.8
5.6
Maximum Rated Input Wattage Rating ( Watts )
889
989
1290
1290
1290
1290
1290
Maximum Rated VA ( Volt
927
1031
1345
1345
1345
1345
1345
Efficiency ( % )
90
91
93
nal Input Current ( A rms )
-Amp )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 29
93
93
93
93
Power Factor
0.9
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS )
10
Maximum British Thermal Unit Rating ( BTU
3033
3375
4403
4403
4403
4403
4403
Input Voltage Range ( V rms ) 100 - 240
Frequency Range (Nominal) ( Hz ) 50 - 60
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
800
900
1200
1200
1200
1200
1200
Nominal Input Current ( A rms )
9.3
8.6
6.7
6.5
6.1
5.8
5.6
Maximum Rated Input Wattage Rating ( Watts )
889
989
1290
1290
1290
1290
1290
Maximum Rated VA ( Volt-Amp )
927 1031 1345 1345 1345 1345 1345
Efficiency ( % )
90 91 93 93 93 93 93
Power Factor
0.97
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS )
10
Maximum British Thermal Unit Rating ( BTU-Hr )
3033 3375
4403
4403
4403
4403
4403
7
-Hr )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 30
HPE 460W Common Slo
Supply Kit (503296
HPE Generic Part Number
499249
HPE Spares Part Number
511777
Input Voltage Range ( V rms )
100
Frequency Range (Nominal) ( Hz )
50
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
460
460
460
460
460
460
460
Nominal Input Current ( A rms )
5.5
4.5
2.6
2.5
2.4
2.3
2.2
Maximum Rated Input Wattage Rating ( Watts )
526
520
505
505
HPE Generic Part Number
499249-001
HPE
t Gold Hot Plug Power
-B21)
-001
-001
- 240
- 60
Spares Part Number
511777-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 31
503
503
503
Maximum Rated VA ( Volt
548
542
527
527
524
5
524
Efficiency ( % )
524
88.5
91
91
91.5
91.5
91.5
Power Factor
0.97
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU
1794
1773
1725
1725
1715
1715
1715
24
-Amp )
-Hr )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 32
Input Voltage Range ( V rms )
100 - 240
Frequency Range (Nominal) ( Hz )
50 - 60
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
460
460
460
460
460
460
460
Nominal Input Current ( A rms )
5.5
4.5
2.6
2.5
2.4
2.3
2.2
Maximum Rated Input Wattage Rating ( Watts )
526 520 505 505 503 503 503
Maximum Rated VA ( Volt-Amp )
548
542
527
527
524
524
524
Efficiency ( % )
524
88.5
91
91
91.5
91.5
91.5
Power Factor
0.97
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS ) 20
Maximum British Thermal Unit Rating ( BTU-Hr )
1794
1773
1725
1725
1715
1715
1715
NOTE:
Power Advisor tool be used to estimate power requirements for this server as power efficiency ma
option kit. The HPE Power Advisor tool can be downloaded at: http://www.hp.com/go/hppoweradvisor.
HPE 750W Common Slot Gold Hot Plug Power
Supply Kit (512327
HPE Generic Pa
506821
HPE Spares Part Number
511778
Input Voltage Range ( V rms )
100
Frequency Range (Nominal) ( Hz )
50
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
750
HPE Generic Part Number
506821-001
HPE
The table above provides power specifications for this power supply; however, it is recommended that the HPE
-B21)
-001
rt Number
Spares Part Number
-001
- 240
- 60
y vary when using this
511778-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 33
750
750
750
750
750
750
Nominal Input Current ( A rms )
8.9
7.4
4.3
4.1
3.9
3.7
3.6
Maximum Rated Input Wattage Rating ( Watts )
857
847
824
824
820
820
820
Maximum Rated VA ( Volt
894
884
859
859
854
854
854
Efficiency ( % )
87.5
88.5
91
91
91.5
91.5
91.5
Pow
0.97
Leakage Current ( mA )
0.42
er Factor
-Amp )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 34
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU
2925
2892
2812
2812
2797
2797
2797
Input Voltage Range ( V rms )
100 - 240
Frequency Range (Nominal) ( Hz )
50 - 60
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
750 750 750 750 750 750 750
Nominal Input Current ( A rms )
8.9 7.4 4.3 4.1 3.9 3.7 3.6
Maximum Rated Input Wattage Rating ( Watts )
857
847
824
824
820
820
820
Maximum Rated VA ( Volt-Amp )
894
884
859
859
854
854
854
Efficiency ( % )
87.5
88.5
91
91
91.5
91.5
91.5
Power Factor
0.97
Leakage Current ( mA )
0.42 0.50 0.83 0.87 0.92 0.96 1.00
Maximum Inrush Current ( A peak ) 30
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU-Hr )
2925
2892
2812
2812
2797
2797
2797
NOTE:
Power Advisor tool be used to estimate power requirements for this server as power efficiency may vary when using this
option kit. The HPE Power Advisor tool can be downloaded at: http://www.hp.com/go/hppoweradvisor.
HP
Supply Kit (500172
HPE Generic Part Number
490594-001
HPE Spares Part Number
498152-001
Input Voltage Range ( V rms ) 100 - 240
Frequency Range (Nominal) ( Hz ) 50 - 60
-Hr )
The table above provides power specifications for this power supply; however, it is recommended that the HPE
1200W Common Slot Silver Hot Plug Power
-B21)
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 35
Nominal Input Voltage ( Vrms )
100
120
200
208
220
230
240
Maximum Rated Output Wattage Rating
800
900
1200
1200
1200
1200
1200
Nominal Input Current ( A rms )
9.7
9.0
7.0
6.8
6.4
6.1
5.9
Maximum Rated Input Wattage Rating ( Watts )
930 1034 1348 1348 1348 1348 1348
Maximum Rated VA ( Volt-Amp )
970 1079 1406
1406
1406
1406
1406
Efficiency ( % )
86
87
89
89
89
89
89
Power Factor
0.97
Leakage Current ( mA )
0.42
0.50
0.83
0.87
0.92
0.96
1.00
Maximum Inrush Current ( A peak )
30
Maximum Inrush Current duration ( mS ) 20
Maximum British Thermal Unit Rating ( BTU-Hr )
3174 3530
4600
4600
4600
4600
4600
HPE 750W Common Slot
Supply Kit (63667
HPE Generic Part Number
619671
HPE Spares Part Number
639173
Input Voltage Range ( V rms )
36
Frequency Range (Nominal) ( Hz )
DC
Nominal Input Voltage ( Vrms )
36
48
72
Maximum Rated Output Wattage Rating
750
750
750
Nominal Inp
23
17
12
Maximum Rated Input Wattage Rating ( Watts )
840
820
830
HPE Generic Part Number
619671-401
HPE
-48VDC Hot Plug Power
3-B21)
-401
-001
- 72
ut Current ( A rms )
Spares Part Number
639173-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 36
Maximum Rated VA ( Volt
840
820
830
Efficiency ( % )
92
94
92
Power Factor
N/A
Leakage Current ( mA )
N/A
Maximum Inrush Current ( A peak )
24
Maximum Inrus
15
Maximum British Thermal Unit Rating ( BTU
2865
2796
2830
Input Voltage Range ( V rms )
36 - 72
Frequency Range (Nominal) ( Hz )
DC
Nominal Input Voltage ( Vrms )
48
Maximum Rated Output Wattage Rating
750
750
750
Nominal Input Current ( A rms )
23
17
12
Maximum Rated Input Wattage Rating ( Watts )
840
820
830
Maximum Rated VA ( Volt-Amp )
840
820
830
Efficiency ( % ) 92 94 92
Power Factor
N/A
Leakage Current ( mA )
N/A
Maximum Inrush Current ( A peak )
24
Maximum Inrush Current duration ( mS )
15
Maximum British Thermal Unit Rating ( BTU-Hr )
2865
2796
2830
HPE 1500W Common Slot 48VDC Hot Plug Power
Supply Kit (746708
HPE
746703-001
HPE
HPE Spares Part Number
794734-001
h Current duration ( mS )
-Amp )
Generic Part Number
-B21)
-Hr )
36
Generic Part Number
72
746703-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 37
HPE Spares Part Number
794734
Input Voltage Range ( VDC )
-
Frequency Range (Nominal) ( Hz )
DC
Nominal Input Voltage ( VDC )
-
-
-
Maximum Rated Output Wattage Rating ( Watts )
1500
1500
1500
Nomin
40.5
33.5
22.2
Maximum Rated Input Wattage Rating ( Watts )
1621
1607
1598
Maximum Rated VA ( Volt
1621
1607
1598
Efficiency ( % )
92.6
93.3
93.9
Power Factor
N/A
Leakage Current ( mA )
N/A
Maximum Inrush Current ( A pe
-001
40 to -72
40
48
72
al Input Current ( ADC )
-Amp )
ak )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 38
63
Maximum Inrush Current duration ( mS )
10
Maximum British Thermal Unit Rating ( BTU
5530
5484
5451
Input Voltage Range ( VDC )
-40 to -72
Frequency Range (Nominal) ( Hz )
DC
Nominal Input Voltage ( VDC )
-40
-48
-72
Maximum Rated Output Wattage Rating ( Watts )
1500
1500
1500
Nominal Input Current ( ADC )
40.5 33.5 22.2
Maximum Rated Input Wattage Rating ( Watts )
1621 1607 1598
Maximum Rated VA ( Volt-Amp )
1621
1607
1598
Efficiency ( % )
92.6
93.3
93.9
Power Factor
N/A
Leakage Current ( mA )
N/A
Maximum Inrush Current ( A peak ) 63
Maximum Inrush Current duration ( mS ) 10
Maximum British Thermal Unit Rating ( BTU-Hr )
5530
5484
5451
HP 1200W Common Slot 380VDC Hot Plug Power
Supply Kit (684539
HPE Generic Part Number
677721
HPE Spares Part Number
704603
Input Voltage Range ( V rms )
240
Frequency Range (Nominal) ( Hz )
DC
Nominal Input Voltage ( Vrms )
240
380
Maximum Rated O
1200
HPE Generic Part Number
677721-101
-Hr )
-B21)
-101
-001
- 380
utput Wattage Rating
HPE Spares Part Number
704603-001
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 39
1200
Nominal Input Current ( A rms )
5.6
3.5
Maximum Rated Input Wattage Rating ( Watts )
1320
1302
Maximum Rated VA ( Volt
1335
1317
Efficiency ( % )
90.9
92.1
Power Factor
1.000
1.000
Leakage Current ( mA )
N/A
Maxi
8
Maximum Inrush Current duration ( mS )
0.2
Maximum British Thermal Unit Rating ( BTU
4505
4444
Input Voltage Range ( V rms )
240 - 380
Frequency Range (Nominal) ( Hz )
DC
Nominal Input Voltage ( Vrms )
240 380
Maximum Rated Output Wattage Rating
1200
1200
Nominal Input Current ( A rms )
5.6
3.5
Maximum Rated Input Wattage Rating ( Watts )
1320
1302
Maximum Rated VA ( Volt-Amp )
1335
1317
Efficiency ( % ) 90.9 92.1
Power Factor 1.000
1.000
Leakage Current ( mA )
N/A
-Amp )
mum Inrush Current ( A peak )
-Hr )
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 40
Maximum Inrush Current ( A peak )
8
Maximum Inrush Current duration ( mS )
0.2
Maximum British Thermal Unit Rating ( BTU-Hr )
4505
4444
HP
ot Plug Power
Supply Kit (717359
HPE Generic Part Number
703247-101
HPE Spares Part Number
714349-001
Input Voltage Range ( V rms ) 200 - 277
Frequency Range (Nominal) ( Hz )
50-60
Nominal Input Voltage ( Vrms )
200
208
220
230
240
277
Maximum Rated Output Wattage Rating
1200
1200
1200
1200
1200
1200
Nominal Input Current ( A rms )
6.7 6.4 6.1 5.8 5.6 4.8
Maximum Rated Input Wattage Rating ( Watts )
1328 1327 1324 1322 1320 1314
Maximum Rated VA ( Volt-Amp )
1343 1342 1339 1337 1335 1330
Efficiency ( % )
90.3
90.4
90.6
90.8
90.9
91.3
Power Factor
1.000
1.000
1.000
1.000
1.000
0.999
Leakage Current ( mA )
0.50
0.75
0.79
0.83
0.87
1.00
Maximum Inrush Current ( A peak )
8
Maximum Inrush Current duration ( mS ) 0.2
Maximum British Thermal Unit Rating ( BTU-Hr )
4532 4526
4518 4511 4504
4484
HP
Supply Kit (717364
HPE Generic Part Number
666375-101
HPE Spares Part Number
674890-001
Input Voltage Range ( V rms )
200 - 277
Frequency Range (Nominal) ( Hz )
60
Nominal Input Voltage ( Vrms )
200
208
220
230
240
277
Maximum Rated Output Wattage Rating
750
750
750
750
750
750
Nominal Input Current ( A rms )
4.1 4.0 3.8 3.6 3.4 3.0
Maximum Rated Input Wattage Rating ( Watts )
820
818
817
815
814
811
Maximum Rated VA ( Volt-Amp )
829
827
826
824
824
821
Efficiency ( % )
91.5
91.7
91.8
92.0
92.1
92.5
Power Factor
1.000
1.000
1.000
1.000
0.999
0.999
Leakage Current ( mA )
0.50
0.75
0.79
0.83
0.87
1.00
Maximum Inrush Current ( A peak ) 8
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU-Hr )
2796
2792
2786
2782
2778
2767
Hold Up Time (ms)
10.0
10.0
10.0
10.0
10.0
10.0
HP 500W Common Slot 277VAC Hot Plug Power
Supply Kit (717362
HPE Generic Part Number
633680-101
HPE Spares Part Number
638549-001
Input Voltage Range ( V rms )
200 - 277
Frequency Range (Nominal) ( Hz ) 50-60
Nominal Input Voltage ( Vrms )
200 208 220 230 240 277
Maximum Rated Output Wattage Rating
500
500
500
500
500
500
1200W Common Slot 277VAC H
-B21)
750W Common Slot 277VAC Hot Plug Power
-B21)
-B21)
QuickSpecs
HPE Common Slot Power Supplies
Po
wer Specifications
Page 41
Nominal Input Current ( A rms )
2.7 2.6 2.5 2.4 2.3 2.0
Maximum Rated Input Wattage Rating ( Watts )
540
540
539
539
538
537
Maximum Rated VA ( Volt-Amp )
547 546 545 545 544 544
Efficiency ( % )
92.6 92.7 92.8 92.8 92.9 93.2
Power Factor
0.999
0.999
0.999
0.999
0.999
0.998
Leakage Current ( mA )
1.00
1.00
1.00
1.00
1.00
1.00
Maximum Inrush Current ( A peak )
8
Maximum Inrush Current duration ( mS )
20
Maximum British Thermal Unit Rating ( BTU-Hr )
1843
1841
1839
1837
1836
1831
Hold Up Time (ms)
10.0 10.0 10.0 10.0 10.0 10.0
QuickSpecs
HPE Common Slot Power Supplies
Technical Specifications
Page 42
All AC Power Supplies:
Operating Temperature
41° to 122°F (5° to 50°C)
Operating Relative
Humidity (%)
5% to 95%, non-condensing
Operating Elevation
0 to 5,000ft (1,524m) with no derating;
Maximum inlet air temperature derat
(3,048m) msl
Storage Temperature
-40° to 185°F (-40 to 85°C)
Storage Relative Humidity
(%)
5% to 95%, non-condensing
Storage Elevation
0 to 50,000ft (0 to 15,240m)
Input Voltage
Low Line - Rated: 100V; Min 90V to Max 132V
High Line
(model 684532
High Line
717364-B21 supported)
Input Frequency
Rated: 50 to 60Hz; Min 47Hz to Max 63Hz
FCC EMI Certification
FCC Class A (models 578322-B21, 684532-B21, 697581-B21, 717359-B21, 717362-B21, 717364-B21,
739252-B21, 739254-B21, and 748287-B21 only); All other models are Class B certified
Mechanical Dimensions
(WxHxD)
1.5 x 3.4 x 7.5 in (3.81 x 8.63 x 19.05 cm) for all models
Unit Weight
2.5 lb (1.13 kg) for models 656362-B21, 656364-B21, 697581-B21, 717359-B21, 717362-B21, and 717364B21
3.0 lb (1.36 kg) for model 684532
2 lb (0.91 kg) for all other VAC models
Shipping Dimensions
(WxHxD)
16.56 x 7.38 x 5.75 in (42.06 x 18.75 x 14.61) for model 684532-B21
15.5 x 7.25 x 5.5 in (39.37 x 18.44 x 13.97 cm) for models 656362
12 x 8 x 4.5 in (30.48 x 20.32 x 11.43 cm) for all other VAC models
Shipping Weight
3.98 lb (1.81 hg) for model 684532-B21
3.5 lb (1.59 kg) for models 656362
B21 only
3 lb (1.36 kg) for all other VAC models
Kit Contents
All models except 697581-B21, 717359-B21, 717362-B21, and 717364-B21 ship with:
(1) Power supply unit, (1) IEC C13
717359-B21, 717362-B21, 717364-B21 do not include a power cable
All DC Power Supplies:
Operating Temperature
41° to 122°F (5° to 50°C)
Operating Relative
Humidity (%)
5% to 95%, non-condensing
Operating Elevation
0 to 5,000ft (1,524m) with no derating;
Maximum inlet air temperature derated linearly down to 40°C from 5000f
(3,048m) msl
Storage Temperature
-40 to 85°C
Storage Relative Humidity
(%)
5% to 95%, non-condensing
Storage Elevation
0 to 50,000ft msl
Input Voltage
48VDC to 54VDC (nominal); Min 36VDC to Max 72VDC (model 636673-B21)
240VDC to 380VDC(nominal); Min 180VDC to Max 420VDC (model 684539-B21 only)
Input Frequency
DC input
Conformance Standards
CE Mark, UL, CSA, IEC, EN, CNS, KCC, BSMI, CCC, C-tick, TUV, FCC Class A (model 684539-B21 only)
ed linearly down to 40°C from 5000ft (1,524m) to 10,000ft
- Rated: 200 - 240V; Min 180V to Max 264V
-B21 and 697581-B21 supports High Line only)
- Rated: 200 - 277VAC; Min 180VAC to Max 305VAC (only models 717359-B21, 717362-B21,
-B21
-B21, 656364-B21, and 697581-B21 only
-B21, 656364-B21, 697581-B21, 717359-B21, 717362-B21, and 717364-
-C14 jumper cable, installation/safety guide - models 697581-B21,
t (1,524m) to 10,000ft
QuickSpecs
HPE Common Slot Power Supplies
Technical Specifications
Page 43
Mechanical Dimensions
(WxHxD)
1.5 x 3.4 x 7.5 in (3.81 x 8.63 x 19.05 cm)
Unit Weight
2.5 lb (1.13 kg) (model 636673-B21)
2.25 lb (1.02 kg) (model 746708-B21)
Shipping Dimensions
(WxHxD)
4.4 X 12.25 X 8 in (11.18 x 31.12 x 20.32 cm) (model 636673-B21)
15.5 x 7.25 x 5.5 in (39.37 x 18.44 x 13.97 c
16.56 x 7.38 x 5.75 in (42.06 x 18.74 x 14.6 cm) (model 746708-B21)
Shipping Weight
3.2 lb (1.45 kg) (model 636673-B21)
3.5 lb (1.59 kg) (model 684539
3.98 lb (1.8 kg) (model 746708-B21)
Kit Contents
Models 636673-B21and 684539-B21 ship with:
(1) Power supply unit, installation/safety guide
Model 746708-B21 ships with:
(1) Power supply unit, installation/safety guide
Environment
Products and Approach
End
and Recycling
Hewlett Packard Enterprise offers end-of-life Hewlett Packard Enterprise
product return
For trade
recycle your produ
contact your nearest
returned to
disposed of in a respons
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the
Hewlett Packard Enterprise
These instructions may be used by recyclers and other WEEE treatment
facilities as well as
who integrate and re-sell Hewlett Packard Enterprise equipment.
-friendly
-of-life Management
m) (model 684539-B21)
-B21)
, trade-in, and recycling programs in many geographic areas.
-in information, please go to: http://www.hp.com/go/green. To
ct, please go to: http://www.hp.com/go/green or
Hewlett Packard Enterprise sales office. Products
Hewlett Packard Enterprise will be recycled, recovered or
ible manner.
web site at: http://www.hp.com/go/green.
HEWLETT PACKARD ENTERPRISE OEM customers
QuickSpecs
HPE Common Slot Power Supplies
Summary of Changes
Page 44
Date
Version History
Action
Description of Change
23-Oct-2017
From Version 13 to 14
Changed
Care Pack naming and Service and Support- Parts and
Materials updated.
19-Feb-2016
From Version 12 to 13
Changed
Models, Related Options, Power Specifications, and Technical
Specifications were revised.
30-Mar-2015
From Version 11 to 12
Added
Added HPE 1500W Common Slot -48V Hot Plug Power
VDC Power Cables were added to Related Options section.
Changed
What's New changed to:
Specifications sections were revised.
Removed
460W Common Slot Platinum Hot Plug Power supply kit,
removed from Models.
29-Sep-2014
From Version 10 to 11
Removed
DC Power Cable kits was removed from Related Options.
18-Feb-2014
From Version 9 to 10
Changed
Changes made to the What's New section:
support for HPE Power Discovery Services).
19-Aug-2013
From Version 8 to 9
Added
HPE 750W Common Slot Titanium Hot Plug Power Supply
Mentions of Titanium power supplies were added throughout
07-Jun-2013
From Version 7 to 8
Changed
Changes made to the Related Options Section - DC Power
Cable Kits
13-May-2013
From Version 6 to 7
Added
Power Specifications: Added HPE 1500W Common Slot
Supply Kit (717359-B21).
Changed
Overview: Updated Image descriptions, What's New with
Kit supporting DC power infrastructure from 200V to 380V
Supply Kit
New 1500W -48VDC 94% efficient Common Slot power
supply options with Phoenix connectors (no support for HPE
Power Discovery Services).
Models in Overview section was revised.
Service and Support, Power Specifications, and Technical
750W Common Slot Platinum Hot Plug Power supply kit,
460W Common Slot Gold Hot Plug Power supply kit, and
750W Common Slot Gold Hot Plug Power supply kit were
New Platinum-certified 460W, 750W, and 1200W Common
Slot power supply options with standard C14 connectors (no
Kit and HPE 500W and 750W Common Slot 227VAC Hot Plug
Power Supply Kits
Platinum Plus Hot Plug Power Supply Kit (684532-B21), HPE
1200W Common Slot 380VDC Power Supply Kit (684539-B21)
and HPE 1200W Common Slot 277VAC Hot Plug Power
New HPE 1500W Common Slot Platinum Plus Hot Plug Power
Supply Kit supporting high-line AC input voltages, up to 94%
power efficiency (80+ Platinum-certified), and HPE Power
Discovery Services
New 1200W Common Slot 380VDC Hot Plug Power Supply
QuickSpecs
HPE Common Slot Power Supplies
Summary of Changes
Page 45
with up to 94% efficiency
Power Specification: Updated entire section
25-Mar-2013
From Version 5 to 6
Changed
Updated What New with New HPE 1200W Common Slot
277VAC Hot Plug Power Supply Kit (717359-B21)
19-Feb-2013
From Version 4 to 5
Changed
Change made to Models in the Overview section.
13-Aug-2012
From Version 3 to 4
Changed
Change made in the Overview and Related Options sections.
10-May-2012
From Version 2 to 3
Changed
Change made in the Related Options section.
26-Mar-2012
From Version 1 to 2
Added
Enablement Kits was added to Related Options.
Sign up for updates
Rate this document
© Copyright 2017 Hewlett Packard Enterprise Development LP. The information contained herein is
subject to change without notice. The only warranties for Hewlett Packard Enterprise products and
services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as con
shall not be liable for technical or editorial errors or omissions contained herein.
c04111541
Overview: cont. Updated Models section with 684532-B21,
717359-B21 and 684539-B21
Standard Features: Updated note in the 80Plus Certification
and Enabling Power Discovery Services.
Related Options: Updated Enablement Kits to Common Slot
Power Supply Enablement Kits and DC Power Cable Kits with
D4J67A.
277VAC Hot Plug Power Supply Kit supporting an AC input
voltage range from 200V to 277V with up to 94% power
efficiency
Changed HPE Power Supplies, 80Plus Certification, and
Power line communication (PLC) Power Cables.
Added HPE 750W Common Slot -48VDC Hot Plug Power
Supply Kit (636673-B21) and HPE 1200W Common Slot
stituting an additional warranty. Hewlett Packard Enterprise
- 14209 - Worldwide - V14 - 23-October-2017
Loading...