HP 275 User Manual

QuickSpecs

Overview

42U Rack with HP ProLiant BL25p System Installed

42U Rack with HP ProLiant BL25p System Installed42U Rack with HP ProLiant BL25p System Installed

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

1.

BL p-Class interconnects (2) in HP BladeSystem p-Class server blade enclosure (interconnect switch shown)

2.

HP ProLiant BL25p server blades (8) in HP BladeSystem p-Class server blade enclosure

3.

HP BladeSystem p-Class 3U power enclosure with hot-plug power supplies (6)

What's New

What's NewWhat's New

Support for AMD Opteron 200 series Dual-Core processors

Models 275 (2.2GHz), 270 (2.0GHz) and 265 (1.8GHz)

1MB L2 cache per core New HP BladeSystem p-Class 1U Power Enclosure Up to two 2.6GHz AMD Opteron Processors with 1M L2 cache Up to 16GB ECC PC3200 DDR (8 DIMM slots) Integrated Smart Array 6i Plus with optional BBWC

DA - 12160 North America — Version 7 — June 27, 2005

Page 1

QuickSpecs

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Overview

At A Glance

At A GlanceAt A Glance

Performance dual processor server blade designed with enterprise availability HP ProLiant BL25p server blade includes: AMD Opteron 200 series single and dual-core processors (dual capability)

Models 275 (2.2GHz), 270 (2.0GHz), 265 (1.8GHz), 252 (2.6GHz) and 250 (2.4GHz) HP ProLiant BL25p Dual Port Fibre Channel Adapter (2-Gb) option for SAN connectivity AMD 8131 and 8111 Chipsets 1024-MB or 2048-MB PC3200 Registered ECC 400MHz DDR memory, (2 x 1 Interleaved Memory), expandable to 16 GB Five total network adapters:

Four PCI-X Gigabit Server NICs (embedded) with WOL and PXE (two single-port NC7781 and one dual-port NC7782)

Plus one additional 10/100 NIC dedicated to iLO Management Smart Array 6i (integrated on system board Controller with optional battery-backed write cache) Wide Ultra320 SCSI Drive Cage standard supports up to two 1" Wide Ultra320 hot plug hard drives Integrated Lights-Out (iLO) Advanced Management (ASIC on motherboard) Plugs vertically into 6U enclosure, 8 BL25p server blades per enclosure Cisco Gigabit Ethernet Switch Module (CGESM) option for Gigabit Ethernet network adapter consolidation. Integrated Access Tool for blade management and enhanced server blade documentation including Best Practices and Common Procedures guides HP BladeSystem p-Class Server Blade Enclosure:

HP BladeSystem p-Class Server Blade Enclosure:

HP BladeSystem p-Class Server Blade Enclosure:HP BladeSystem p-Class Server Blade Enclosure:

Server blades and interconnects blind mate into server blade enclosures for network connection and power

Server blade enclosure is 6U and holds up to 8 HP ProLiant BL25p server blades and 2 interconnects

Types of interconnects available: GbE Interconnect Switches, GbE2 and CGESM Interconnect Switches with optional

Fibre Channel pass through, Patch Panels or Patch Panel 2 with Fibre Channel pass through HP BladeSystem p-Class Power Enclosures:

HP BladeSystem p-Class Power Enclosures:

HP BladeSystem p-Class Power Enclosures:HP BladeSystem p-Class Power Enclosures:

Use BL p-Class sizing tool to determine power based on your configuration

http://h30099.www3.hp.com/configurator/calc/Power%20Calculator%20Catalog.xls

BL p-Class power enclosure provides shared, external, redundant power

Choose the HP BladeSystem p-Class 3U power enclosure or the HP BladeSystem p-Class 1U power enclosure

Choose single-phase or three-phase power

HP BladeSystem power enclosures with power supplies are not needed if using facility -48VDC ± 10%, in this case

purchase facility DC option kit HP BladeSystem p-Class Power Distribution (only required with the 3U power enclosure):

HP BladeSystem p-Class Power Distribution (only required with the 3U power enclosure):

HP BladeSystem p-Class Power Distribution (only required with the 3U power enclosure):HP BladeSystem p-Class Power Distribution (only required with the 3U power enclosure):

Distributes power from the power enclosure to the server blade enclosures

Four power distribution choices:

BL p-Class scalable bus bar

BL p-Class mini bus bar

BL p-Class power bus box

Dual power input kit for mini bus bar (required for support of two power enclosures) HP ProLiant BL25p server blade, and p-Class server blade enclosure, interconnects and power enclosure protected by a limited three year warranty with optional service uplifts available

NOTE:

NOTE: NOTE:

Power requirements for a HP BladeSystem p-Class-: 200V - 240V AC, 30 amp or facility DC -48V ± 10%.

.

DA - 12160 North America — Version 7 — June 27, 2005

Page 2

QuickSpecs

Overview

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

++++

HP BladeSystem p-Class Server Blade Enclosure

HP BladeSystem p-Class Server Blade EnclosureHP BladeSystem p-Class Server Blade Enclosure

++++

DA - 12160 North America — Version 7 — June 27, 2005

Page 3

QuickSpecs

Overview

OR

OROR

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Patch Panel (shown) or

Patch Panel 2

BL p-Class Interconnects

BL p-Class InterconnectsBL p-Class Interconnects

GbE Interconnect Switch (shown) or GbE2 Interconnect Switch or

CGESM Interconnect Switch (fiber or copper-based)

++++

BL p-Class power enclosures and power supplies

BL p-Class power enclosures and power suppliesBL p-Class power enclosures and power supplies

OR

OROR

HP BladeSystem p-Class 1U power enclosure and power supplies

HP BladeSystem p-Class 1U power enclosure and power suppliesHP BladeSystem p-Class 1U power enclosure and power supplies

OR

OROR

Facility DC

Facility DCFacility DC

DA - 12160 North America — Version 7 — June 27, 2005

Page 4

QuickSpecs

Overview

OR

OR OR

OROR

OR

OROR

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Scalable bus bar

HP BladeSystem p-Class power distribution (only required with the 3U power enclosure)

HP BladeSystem p-Class power distribution (only required with the 3U power enclosure)HP BladeSystem p-Class power distribution (only required with the 3U power enclosure)

Configuration Steps

Configuration StepsConfiguration Steps

For a complete configuration of the HP ProLiant BL25p server blade, do the following:

1.

Select desired model, configuration and quantity of HP ProLiant BL25p server blades.

PLUS

PLUSPLUS

2.

Decide how many HP BladeSystem p-Class Server Blade Enclosures to purchase (each enclosure can hold up to 8 HP ProLiant BL25p server blades):

Mini bus bar

Bus boxes

Dual power input kit for mini bus bar

HP BladeSystem p-Class server blade enclosure with enhanced backplane components with 8 Rapid Deployment Pack licenses (281404-B22) Or HP BladeSystem p-Class server blade enclosure with enhanced backplane components with 8 Rapid Deployment Pack trial (243564-B22) Or HP BladeSystem p-Class server blade enclosure with enhanced backplane components with 8 HP BladeSystem Management Suite licenses (380625-B22) - includes: a single copy of Systems Insight Manager (SIM) and 8 licenses for each of the following products: Rapid Deployment Pack (RDP), Performance Management Pack (PMP) and the Vulnerability and Patch Management Pack (VPM)

NOTE:

NOTE:NOTE: server blade model is selected. NOTE:

NOTE:

NOTE:NOTE:

Or

HP BladeSystem p-Class Enhanced Server Blade enclosures may be required depending on which HP ProLiant BL25p

The HP BL25p server blade does not currently support PMP. Future support is planned.

DA - 12160 North America — Version 7 — June 27, 2005

Page 5

QuickSpecs

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Overview

HP BladeSystem p-Class Server Blade Enclosure Upgrade Kit (option)(354100-B21)

NOTE:

NOTE: NOTE: upgrade of a blade enclosure to support BL p-class blades and provide a single, physical iLO port for the enclosure.

PLUS

PLUSPLUS

3.

Select an Interconnect Kit. Each Interconnect Kit contains a pair of interconnects except the Cisco GESM which contains a single Switch per kit. One pair of interconnects is required with each blade enclosure: RJ-45 Patch Panel 2 with Fibre Channel pass through (required for Fibre Channel connectivity on HP ProLiant BL20p G3 when using the patch panel interconnect) (306465-B21) Or RJ-45 Patch Panel (230766-B21) Or Quantity (2) Cisco Gigabit Switch Module for HP BladeSystem p-Class Interconnect Kit (with 16 10/100/1000 T/TX/T downlink ports, 2 RJ-45 10/100/1000 T/TX/T uplink ports, and 4 SFP ports) (378926-B21), with or without any combination of up to 4 10/100/1000 T/TX/T RJ-45 SFP Module (378928-B21) or 1000BASE SX Fiber SFP Module (378929-B21), with or without ProLiant BL p-Class Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for ProLiant BLXXp server blade Fibre Channel connectivity when using the CGESM Interconnect Switch) Or Quantity (2) Cisco Gigabit Switch Module for HP BladeSystem p-Class Interconnect Kit (with 16 10/100/1000 T/TX/T downlink ports, 2 RJ-45 10/100/1000 T/TX/T uplink ports, and 4 SFP ports populated with 2 10/100/1000 T/TX/T SFP modules) (378927-B21), with or without optional ProLiant BL p-Class Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for ProLiant BLXXp server blade Fibre Channel connectivity when using the CGESM Interconnect Switch) Or BL p-Class C-GbE2 Interconnect Kit (with 16 10/100/1000 T/TX/T downlink ports, 6 RJ-45 10/100/1000 T/TX/T uplink ports ) (283192-B21), with or without optional ProLiant BL p-Class Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for ProLiant BLXXp server blade Fibre Channel connectivity when using the GbE2 Interconnect Switch) Or BL p-Class F-GbE2 Interconnect (with 16 10/100/1000 T/TX/T downlink ports, 4 LC 1000 SX and 2 RJ-45 10/100/1000 T/TX/T uplink ports) (283193-B21), with or without optional ProLiant BL p-Class Storage Connectivity Kit (with 16 Fibre Channel connectors) (321745 -B21) (required for BLXXp server blade Fibre Channel connectivity when using the GbE2 Interconnect Switch) Or BL p-Class C-GbE Interconnect Kit (with 4 RJ-45 10/100/1000 T/TX/T uplink ports and 16 RJ-45 10/100 T/TX downlink ports (249655-B21) Or BL p-Class F-GbE Interconnect Kit (with 4 LC 1000 SX uplink ports and 16 RJ-45 10/100 T/TX downlink ports) (279720-B21)

Server Blade Enclosure Upgrade Kit (354100-B21) contains enhanced backplane components and enables a field

PLUS

PLUSPLUS

4.

Select a HP BladeSystem p-Class power enclosure and power supplies based on configuration. Use p-Class sizing tool to help determine power configuration:

NOTE:

NOTE: NOTE:

Single phase 3U power enclosure with four power supplies (Single-phase 3U power enclosure holds a max of four power supplies) (239162-001) Or Three-phase 3U power enclosure with six power supplies (Three-phase 3U power enclosure holds a max of six power supplies) (230769-001)

NOTE:

NOTE: NOTE:

Or 1U power enclosure with six power supplies (378284-B21) Or

Power enclosures and supplies are not needed if using facility DC (-48V ± 10%).

3U Power enclosures and supplies can also be purchased separately see options list

http://h30099.www3.hp.com/configurator/calc/Power%20Calculator%20Catalog.xls

DA - 12160 North America — Version 7 — June 27, 2005

.

Page 6

QuickSpecs

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Overview

1U power enclosure with two power supplies (380314-B21)

NOTE:

Additional power supplies can also be purchased separately - see options list below.

NOTE:NOTE:

PLUS

PLUSPLUS

5.

Select power distribution (only required with 3U power enclosures): Scalable bus bar - Supports up to 5 server blade enclosures* (240560-B21) Or Mini bus bar - Supports up to 3 server blade enclosures* (240559-B21) Or Power Bus Box - Supports only 1 server blade enclosure* (240562-B21) Dual Power Input Kit for Mini Bus Bar - required for support of two power enclosures. (364565-B21) Or HP Modular Distribution Unit 40 Amp (P/N 252663-D75) Or HP Modular Distribution Unit 24 Amp (P/N 252663-D74)

*

NOTE:

Maximum depends upon power input

NOTE:NOTE:

**

NOTE:

The Modular Distribution Unit Kits excludes the extension bars as they are not required with the HP BladeSystem p-

NOTE:NOTE:

class 1U power enclosure.

**

DA - 12160 North America — Version 7 — June 27, 2005

Page 7

QuickSpecs

Standard Features (Server Blade)

Processors

ProcessorsProcessors

Upgradeability

UpgradeabilityUpgradeability

Cache Memory

Cache MemoryCache Memory

Chipset

ChipsetChipset

Memory

MemoryMemory

AMD Opteron Model 252 processor 2.6 GHz/1 GHz - 1MB (single-core) AMD Opteron Model 250 processor 2.4 GHz/800 MHz - 1MB (single-core) AMD Opteron Model 265 processor 1.8GHz/1 GHz (dual-core) AMD Opteron Model 270 processor 2.0GHz/1 GHz (dual-core) AMD Opteron Model 275 processor 2.2GHz/1 GHz (dual-core)

Upgradeable to dual processing.

1-MB Level 2 Cache per core

AMD 8131 and 8111 chipsets

Standard

Maximum

NOTE:

Memory must be installed in pairs.

NOTE:NOTE:

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

1024 MB or 2048 MB of 2-way interleaved PC3200 DDR SDRAM running at 400MHz (depending on model)

16 GB

Network Adapter

Network AdapterNetwork Adapter

Manageability

ManageabilityManageability

Internal Storage

Internal StorageInternal Storage

Five network adapters total: Four PCI-X Gigabit NICs (embedded) with WOL and PXE (two single-port NC7781 and one dual-port

NC7782) One 10/100 iLO NIC dedicated to management

NOTE:

Must use a HP BladeSystem p-class server blade enclosure with enhanced backplane to utilize all

NOTE:NOTE: four NIC's (281404-B22, 243564-B22 or 380625-B22).

Integrated Lights-Out (iLO) Management Advanced (ASIC on the System Board)

Hard Drives Maximum Internal Storage

None ship standard 600 GB (internal drive cage) (2 x 300 GB Wide Ultra320, 1" drive

DA - 12160 North America — Version 7 — June 27, 2005

Page 8

QuickSpecs

Standard Features (Server Blade)

Fiber Channel on the

Fiber Channel on theFiber Channel on the HP ProLiant BL25p server

HP ProLiant BL25p server

HP ProLiant BL25p serverHP ProLiant BL25p server blade

blade

bladeblade

The following items are needed to connect the HP ProLiant BL25p server blade to the SAN:

1. HP ProLiant BL25/45p Dual-port Fibre Channel Adapter plugs into the Server Blades The HP ProLiant BL25/45p dual-port Fibre Channel Adapter is compatible with the new HP

ProLiant BL25p and BL45p server blades (it cannot be used with a HP ProLiant BL20p, HP ProLiant BL30p, HP ProLiant BL35p or HP ProLiant BL40p server blades) Two ports on each Dual-port Fibre Channel Mezzanine Card provide a redundant Fibre Channel connection to each server blade Supports up to 2 Gb/s Fibre Channel equipment Uses the QLogic chipset Includes two small form factor pluggable transceivers with LC connectors for installation into the Patch Panel 2, CGESM or GbE2 Interconnect Switch (with the Storage Connectivity Kit) The HP ProLiant BL25p Dual-port Fibre Channel Adapter Option Kit must be ordered separately. and

2A. BL p-Class Patch Panel 2 (with Fibre Channel pass through) interconnect option

Allows pass through of both Ethernet and Fibre Channel signals Ethernet signals exit out the rear of the RJ-45 Patch Panel G2; Fibre Channel signals exit out the front of the RJ-45 Patch Panel G2 8 Fibre Channel small form factor pluggable (SPF) transceiver slots on the front of each RJ-45 patch panel 2 (16 Fibre Channel connections per server blade enclosure); for insertion of SPF transceivers included with the HP ProLiant BL25p Dual-port Fibre Channel kit or

2B. BL p-Class C-GbE2 or F-GbE2 or CGESM Interconnect Kit plus the optional Storage Connectivity Kit

Allows LAN signal consolidation and pass through of BL20p G3 Fibre Channel signals Both LAN Ethernet signals and SAN Fibre Channel signals exit out the rear of the GbE2 or CGESM Interconnect Switch (with the Storage Connectivity Kit option) via dedicated modular interconnect modules 8 Fibre Channel small form factor pluggable (SPF) transceiver slots on the back of each GbE2 Interconnect Switch (16 Fibre Channel SPF slots per server blade enclosure) SPF transceivers are included with the HP ProLiant BL25p Dual-port Fibre Channel Adapter kit and

3. Compatible SAN Optimized for StorageWorks arrays: HSG80 (MA8000, EMA12000, EMA16000); EVA5000;

EVA3000; XP48, XP128, XP512, XP1024; HP StorageWorks Modular Smart Array 1000 and 1500 Compatible with select 3rd party SANs (please see blade storage page for more details

http://h18000.www1.hp.com/products/servers/proliant-bl/p-class/storage.html

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

)

Expansion Slots

Expansion SlotsExpansion Slots

No PCI slots all features are integrated

I/O cable connectors:

I/O cable connectors:I/O cable connectors:

(2)USB ports, (1) video port, (1) iLO port and (1) kernel debug port (2) I/O cables ship with every server blade enclosure Tested USB devices (keyboard, mouse, floppy) are listed in the "Options" section of this QuickSpecs

DA - 12160 North America — Version 7 — June 27, 2005

Page 9

QuickSpecs

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Standard Features (Server Blade Enclosure and Interconnects)

HP BladeSystem p-Class Server Blade Enclosures and ProLiant BL p-Class Interconnects

HP BladeSystem p-Class Server Blade Enclosures and ProLiant BL p-Class InterconnectsHP BladeSystem p-Class Server Blade Enclosures and ProLiant BL p-Class Interconnects

HP BladeSystem

HP BladeSystemHP BladeSystem p-Class Server Blade

p-Class Server Blade

p-Class Server Bladep-Class Server Blade Enclosures

Enclosures

EnclosuresEnclosures

HP BladeSystem

HP BladeSystemHP BladeSystem p-Class Power

p-Class Power

p-Class Powerp-Class Power Requirements

Requirements

RequirementsRequirements

6U (10.5-inch), 19-inch wide Holds up to 8 HP ProLiant BL25p servers blades 10 bays per server blade enclosure 8 bays for server blades 2 outside bays for interconnect modules (RJ-45 Patch Panel, RJ-45 Patch Panel 2, GbE Interconnect

Switch, GbE2 Interconnect Switch or CGESM Interconnect Switch) Server blades blind mate into the server blade enclosure backplane for power and data connections

NOTE:

NOTE: NOTE: which HP ProLiant BL25p server blade model is selected.

http://www.hp.com/go/bladesystem/enclosure/compatibility

NOTE:

NOTE: NOTE: and enables a field upgrade of a blade enclosure to support specific HP ProLiant BL25p server blade models and provide a single, physical iLO port for the enclosure.

Server blade management module attached to the back of each HP BladeSystem p-Class 6U server blade enclosure to report events all servers and provide asset and inventory information

Redundant 200V - 240V AC, 30 amp single-phase Redundant 208V 30amp 3-phase 4 wire Redundant -48VDC ± 10%

HP BladeSystem p-Class Enhanced Server Blade enclosures might be required depending on

Server Blade Enclosure Upgrade Kit (354100-B21) contains enhanced backplane components

ProLiant BL p-Class

ProLiant BL p-ClassProLiant BL p-Class Interconnect Switch

Interconnect Switch

Interconnect SwitchInterconnect Switch Option

Option

OptionOption

(Every HP BladeSystem pClass server blade enclosure requires two interconnect switches OR two RJ-45 patch panels)

Provides up to a 32 to 1 server networking cable reduction per server enclosure depending on the mix of HP ProLiant BL20p, HP ProLiant BL25p, HP ProLiant BL30p, HP ProLiant BL35p, HP ProLiant BL40p and HP ProLiant BL45p server blades. Each interconnect switch (two per enclosure) reduces up to sixteen internal server network (NIC) ports to six external ports (four on a modular rear mounting interconnect module and two on the switch front panel). This provides a total of twelve external ports per server blade enclosure. Only one to all twelve external ports may be used per server blade enclosure.

The Cisco Gigabit Ethernet Switch Module (CGESM) Interconnect Kits are for applications that require network adapter consolidation to 1000 Mbps (Gigabit Ethernet) in a Cisco infrastructure. The CGESM supports the same and HP ProLiant BL25p Fibre Channel pass-through as the GbE2.

The Cisco Gigabit Ethernet Switch Module Interconnect kit includes one CGESM Interconnect Switch or one CGESM with four (4) RJ-45 10/100/1000 T/TX/T Small Form Factor Pluggable (SFP) Modules Quantity 2 Cisco Gigabit Ethernet Switch Module Interconnect kits provide two CGESM Interconnect Switches providing any combination of up to twelve (12) RJ-45 10/100/1000 T/TX/T or Fiber SX external ports per server blade enclosure. The optional ProLiant BL p-Class Storage Connectivity Kit (321745 -B21) is required for HP ProLiant BL25p Fibre Channel pass-through when using either the CGESM Interconnect Kit.

DA - 12160 North America — Version 7 — June 27, 2005

Page 10

QuickSpecs

Standard Features (Server Blade Enclosure and Interconnects)

The GbE2 Interconnect Kits (C-GbE2 and F-GbE2) are for applications that require network adapter consolidation to 1000 Mbps (Gigabit Ethernet) and HP ProLiant BL25p Fibre Channel pass-through.

The ProLiant BL p-Class F-GbE2 Interconnect Kit includes two GbE2 Interconnect Switches and two QuadSX Interconnect Modules that provide eight (8) LC 1000 SX and four (4) RJ-45 10/100/1000 T/TX/T external ports per server blade enclosure. The ProLiant BL p-Class C-GbE2 Interconnect Kit includes two GbE2 Interconnect Switches and two QuadT2 Interconnect Modules that provide twelve (12) RJ-45 10/100/1000 T/TX/T external ports per server blade enclosure.

The optional ProLiant BL p-Class Storage Connectivity Kit (321745 -B21) is required for HP ProLiant BL25p Fibre Channel pass-through when using either the C-GbE2 or F-GbE2 Interconnect Kit.

The GbE Interconnect Kits (C-GbE and F-GbE) are for applications that require network adapter consolidation to 100 Mbps (Fast Ethernet).

The ProLiant BL p-Class F-GbE Interconnect Kit includes two GbE Interconnect Switches and two DualTSX Interconnect Modules that provide four (4) LC 1000 SX and eight (8) RJ-45 10/100 T/TX external ports per server blade enclosure. The ProLiant BL p-Class C-GbE Interconnect Kit includes two GbE Interconnect Switches and two QuadT Interconnect Modules that provide four (4) RJ-45 10/100/1000 T/TX/T and eight (8) RJ45 10/100 T/TX external ports per server blade enclosure.

Also included (per Interconnect Switch):

One (1) RS-232 DB-9 front panel out-of-band management port Redundant crosslink ports connecting the two interconnect switches Redundant power inputs and on-board redundant fans Hot-plug and hot- remove with configuration retention and no need to cable/re-cable Power ON, management, and per port status and speed LED indicators Reset/power momentary push-button switch HP ProLiant BL Interconnect Switch Management Utilities and User Documentation CD Fully pre-configured for rapid deployment and immediate operation

The GbE Interconnect Kits (C-GbE and F-GbE) are for applications that require network adapter consolidation to 100 Mbps (Fast Ethernet).

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

The ProLiant BL p-Class F-GbE Interconnect Kit includes two GbE Interconnect Switches and two DualTSX Interconnect Modules that provide four (4) LC 1000 SX and eight (8) RJ-45 10/100 T/TX external ports per server blade enclosure. The ProLiant BL p-Class C-GbE Interconnect Kit includes two GbE Interconnect Switches and two QuadT Interconnect Modules that provide four (4) RJ-45 10/100/1000 T/TX/T and eight (8) RJ45 10/100 T/TX external ports per server blade enclosure.

ProLiant BL Interconnect Switch Management System and Utilities: Full featured web-based and scriptable command line (CLI) interfaces, password protected multi-level

user accounts, Telnet, SNMP, BootP client, port mirroring, port-based VLANs and VLAN tagging, EtherChannel compatible multi-port trunking, network time protocol, spanning tree protocol, broadcast/multicast storm control, flow control, human readable/writeable configuration file, TFTP client, IP address security restrictions, auto-MDI/MDIX, auto-negotiation and auto-sensing of speed and duplex mode, and more.

DA - 12160 North America — Version 7 — June 27, 2005

Page 11

QuickSpecs

Standard Features (Server Blade Enclosure and Interconnects)

ProLiant BL p-Class

ProLiant BL p-ClassProLiant BL p-Class Storage Connectivity Kit

Storage Connectivity Kit

Storage Connectivity KitStorage Connectivity Kit Option

Option

OptionOption (Supports two CGESM or GbE2 switches per kit)

ProLiant BL p-Class

ProLiant BL p-ClassProLiant BL p-Class RJ-45 Patch Panel

RJ-45 Patch Panel

RJ-45 Patch PanelRJ-45 Patch Panel (Two patch panels per kit) (Every BL p-Class server blade enclosure requires two Interconnect switches OR two RJ-45 patch panels)

The Storage Connectivity Kit is used if HP ProLiant BL25p Fibre Channel signal pass-through is desired when using the CGESM or GbE2 Interconnect Switch. Therefore, both LAN cable consolidation and SAN connectivity is possible using a single interconnect option. Order one Storage Connectivity Kit per server blade enclosure for Fibre Channel pass through. The Storage Connectivity Kit includes two OctalFC Interconnect Modules that provide sixteen open transceiver slots for the pluggable small form factor transceivers that come with each HP ProLiant BL25/45p Dual port Fibre Channel Adapter. The Storage Connectivity Kit supports up to eight HP ProLiant BL25p server blades (for a total of sixteen Fibre Channel signals).

6U (10.5-inch), Plugs into HP BladeSystem p-Class 6U server blade enclosures

Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections

Supports Gigabit Ethernet network adapters

16 RJ-45 connectors on the back of each BL p-Class 6U RJ-45 Patch Panel (32 RJ-45 connections per server blade enclosure)

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

ProLiant BL p-Class RJ-45

ProLiant BL p-Class RJ-45ProLiant BL p-Class RJ-45 Patch Panel 2

Patch Panel 2

Patch Panel 2 Patch Panel 2 Channel pass through) (Two patch panels per kit) (Every BL p-Class server blade enclosure requires two Interconnect switches OR two RJ-45 patch panels)

NOTE:

The Patch Panel 2

NOTE:NOTE: or a Switch Interconnect Kit is required for SAN connectivity on the HP ProLiant BL25p server blade

Required Network

Required NetworkRequired Network Cabling

Cabling

CablingCabling

(with Fibre

6U (10.5-inch), Plugs into HP BladeSystem p-Class 6U server blade enclosures Used to pass NIC signals from all server blades in server blade enclosure out as RJ-45 connections also

used to pass Fibre Channel signals for SAN connectivity Supports Gigabit Ethernet network adapters 16 RJ-45 connectors on the back of each RJ-45 patch panel 2 (32 RJ-45 connections per server blade

enclosure) Fibre Channel,

Fibre Channel,

Fibre Channel,Fibre Channel, pass through

pass through

pass throughpass through

10Base-T

100Base-TX

1000Base-T

1000Base-SX

NOTE:

NOTE: NOTE:

http://www.compaq.com/products/servers

For cabling information, refer to the Web site at:

Fibre Channel signals travel from a HP ProLiant BL25p server blade with a Dual-Port Fibre Channel Adapter through p-Class server blade enclosure backplane. The Fibre Channel signals are terminated through the RJ-45 Patch Panel 2 in the interconnect bays. To provide redundancy each server blade has two Fibre Channel signals and one Fibre Channel signal terminates through the right RJ-45 Patch Panel 2, one Fibre Channel signal travels terminates through the left RJ-45 Patch Panel 2.

8 Fibre Channel small form factor pluggable (SPF) transceiver slots on the front of each RJ-45 patch panel 2 (16 Fibre Channel connections per server blade enclosure); for insertion of SPF transceivers included with the Dual-port Fibre Channel Adapter

Categories 3, 4 or 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters)

Category 5 UTP (100 meters) EIA/TIA-568 100-ohm STP (100 meters)

50/125 µm Multimode Fiber, 400 MHz/Km (500 meters) 50/125 µm Multimode Fiber, 500 MHz/Km (550 meters)

62.5/125 µm Multimode Fiber, 160 MHz/Km (220 meters)

62.5/125 µm Multimode Fiber, 200 MHz/Km (275 meters)

.

DA - 12160 North America — Version 7 — June 27, 2005

Page 12

QuickSpecs

Standard Features (Power System and Rack Information)

HP BladeSystem

HP BladeSystemHP BladeSystem p-Class Power System

p-Class Power System

p-Class Power Systemp-Class Power System and Rack Information

and Rack Information

and Rack Informationand Rack Information

HP BladeSystem

HP BladeSystemHP BladeSystem p-Class 3U Power

p-Class 3U Power

p-Class 3U Powerp-Class 3U Power Enclosure

Enclosure

EnclosureEnclosure

HP BladeSystem

HP BladeSystemHP BladeSystem p-Class 1U Power

p-Class 1U Power

p-Class 1U Powerp-Class 1U Power Enclosure

Enclosure

EnclosureEnclosure

NOTE:

NOTE: NOTE: Planning Whitepaper and sizing tool at

class/20p/index.html

3U (5.25-inch), 19-inch wide, 29-inch deep (0.48-meter wide, 0.74-meter deep), Dual input single phase and three phase models available.

HP BladeSystem p-Class 3U power enclosure provides external, shared hot-plug power. Each threephase power enclosure houses up to six hot-plug power supplies each single-phase power enclosures hold up to four hot-plug power supplies to power the BL p-Class server blades and interconnects Please use the sizing utility to determine the power needed for each configuration

http://www.hp.com/go/bladesystem/powercalculator

Power enclosures and power supplies are not needed if using facility DC (-48V DC ± 10%). If using facility DC, only Facility DC Power Connection kit part number (240563-B21) is needed.

1U (1.75-inch), 19-inch wide, 29-inch deep (0.48-meter wide, 0.74-meter deep), Multi-input single phase or three phase operation.

HP BladeSystem p-Class 1U power enclosure provides external, hot-plug power. Each 1U power enclosure houses up to six hot-plug power supplies to power up to one server blade enclosure, fully populated with BL p-Class server blades and interconnects. Please use the sizing utility to determine the power needed for each configuration

http://www.hp.com/go/bladesystem/powercalculator.

NOTE: Power enclosures and power supplies are not needed if using facility DC (-48V DC ± 10%). If using facility DC, only Facility DC Power Connection kit part number (240563-B21) is needed.

To determine power configuration please refer to the HP BladeSystem p-Class Overview and

http://h18000.www1.hp.com/products/servers/proliant-bl/p-

.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

.

HP BladeSystem

HP BladeSystemHP BladeSystem p-Class Power

p-Class Power

p-Class Powerp-Class Power Distribution (only required

Distribution (only required

Distribution (only requiredDistribution (only required with 3U power

with 3U power

with 3U powerwith 3U power enclosures)

enclosures)

enclosures)enclosures)

In the HP BladeSystem p-Class infrastructure, redundant -48 VDC power (from the power enclosures or facility DC power) is distributed from the power enclosures to the server blade enclosures through the bus bar system. Hinges attach the HP BladeSystem bus bars to the rails in a rack. The bus bars swing open from the center to enable easy rear access to the server blades and network cables. Power is distributed redundantly through independent A- and B-sided bus bars.

Three different power distribution solutions are available depending on the maximum number of server blade enclosures planned for the rack:

HP BladeSystem p-Class scalable bus bar HP BladeSystem p-Class mini bus bar HP BladeSystem p-Class power bus box

NOTE:

To support a full 42U rack of HP ProLiant BL25p server blades (6 server blade enclosures), two

NOTE:NOTE: mini bus bars are needed.

DA - 12160 North America — Version 7 — June 27, 2005

Page 13

QuickSpecs

Standard Features (Power System and Rack Information)

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Scalable Bus Bar

Scalable Bus BarScalable Bus Bar Mini Bus Bar

Mini Bus Bar

Mini Bus BarMini Bus Bar Power Bus Box

Power Bus Box

Power Bus BoxPower Bus Box

Required Power Source

Required Power SourceRequired Power Source

Power Enclosures Supported

Power Enclosures SupportedPower Enclosures Supported

1 or 2 1 or 2

1

Dual power input kit for mini bus bar option (364565-B21) required to support two power enclosures.

NOTE:

To support a full 42U rack

NOTE:NOTE: of BL p-Class server blades, use two stacked pairs of mini bus bars.

Two 30amp redundant power feeds per power enclosure Connectors

-NEMA receptacles

1-phase L6-30, 250v, 30A 3-wire 3-phase L15-30, 250V, 30A, 4-wire Optimized for power cabling from bottom and network cabling from top

Server Blade Enclosures

Server Blade EnclosuresServer Blade Enclosures

Supported

SupportedSupported

up to 5 up to 3

1

Max. Rack Space Occupied

Max. Rack Space OccupiedMax. Rack Space Occupied

36U 21U

9U

DA - 12160 North America — Version 7 — June 27, 2005

Page 14

QuickSpecs

Standard Features

ProLiant Essentials

ProLiant EssentialsProLiant Essentials Foundation Pack

Foundation Pack

Foundation PackFoundation Pack Software for the ProLiant

Software for the ProLiant

Software for the ProLiantSoftware for the ProLiant BL Server Blades

BL Server Blades

BL Server BladesBL Server Blades

ProLiant Essentials Rapid Deployment Pack

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Rapid Deployment Pack (RDP) is an automated deployment and provisioning solution for all ProLiant servers. RDP includes the Altiris Deployment Solution and ProLiant Integration Module featuring ProLiant server pre-configured events for OS installation, and optimized software drivers, firmware and management agents. Every RDP CD includes 10-node trial licenses for evaluation purposes. RDP requires a license for each server deployed and is available for purchase with blade servers. For more information, visit

http://www.hp.com/servers/rdp

.

HP Systems Insight Manager

Management Agents

Subscriber's Choice

HP Systems Insight Manager (HP SIM) help maximize system uptime and performance and reduce system maintenance costs by providing proactive notification of problems before those problems result in unplanned downtime or reduced productivity. HP SIM is easy to set up to work with the Insight Management Agents, integrated Light-Out and Remote Insight Light-Out Edition, and Version Control Agents to deliver robust fault, configuration, and asset management as well as remote administration. With HP Systems Insight Manager customers will also be able to take advantage of role-based security; the ability to manage ProLiant, Integrity, and HP9000 systems; and plug-ins for storage, client, printer, and power management as well as server rapid deployment, performance management, and workload management. For more details on HP Systems Insight Manager visit

http://www.hp.com/go/hpsim

The Management Agents form the foundation for HP's Intelligent Manageability strategy. They provide direct, browser-based access to indepth instrumentation built into HP servers, workstations, desktops, and portables, and send alerts to HP Systems Insight Manager and other enterprise management applications in case of subsystem or environmental failures. For additional information about the Management Agents and other management products from HP, please visit the management Web site at

http://www.hp.com/servers/manage

Subscriber's Choice Driver and Support Alerts/Notifications is a web-based email subscription service that provides software and driver change notifications for ProLiant products. Sign up at

http://www.hp.com/go/subscriberschoice

and customize your profile to receive various new alerts as they become available, on a weekly or monthly basis.

.

ROMPaq software, and configuration utilities

Insight Diagnostics Online Edition

NOTE:

NOTE: NOTE:

http://www.hp.com/servers/proliantessentials

, support

For more information regarding ProLiant Essentials Software, please see the following URL:

DA - 12160 North America — Version 7 — June 27, 2005

The latest software, drivers, and firmware fully optimized and tested for your ProLiant server and options, available in the RDP CD, SmartStart or downloadable from Software and Drivers download pages, linked from the SmartStart website at

The most advanced configuration analysis, reporting and troubleshooting utilities used by HP and at your fingertips, available in SmartStart.

http://www.hp.com/go/support

.

Page 15

QuickSpecs

Standard Features

Optional ProLiant

Optional ProLiantOptional ProLiant Essentials Value Packs

Essentials Value Packs

Essentials Value PacksEssentials Value Packs

Optional software offerings that selectively extend the functionality of an Adaptive Infrastructure to address specific business problems and needs:

Workload Management Pack - provides easier management of complex environments, improving overall server utilization and enabling Windows® 2000 customers for the first time to confidently deploy multiple applications on a single multiprocessor ProLiant Server. Performance Management Pack - a performance management solution that identifies and explains hardware performance bottlenecks on ProLiant servers and attached options enabling users to better utilize their valuable resources. Intelligent Networking Pack - detects and analyzes network bottlenecks or broken network linkages and steers traffic to the optimum route based on network conditions. Vulnerability and Patch management Pack - identifies and remediates software security vulnerabilities due to missing patches as well operating system configurations that can be exploited by viruses, worms and other blended threats. Virtual Machine Management Pack - provides central management and control of virtual machines from Microsoft and VMware. Integrated approach provides the ability to manage both physical and virtual resources from a single management console.

NOTE:

Flexible and volume quantity license kits are available for ProLiant Essentials Value Packs. Refer

NOTE:NOTE: to

http://www.hp.com/servers/proliantessentials

QuickSpecs for more information.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

or the various ProLiant Essentials Value Pack product

SmartStart

SmartStartSmartStart

OS Support:

OS Support:OS Support: Single-Core

Single-Core

Single-CoreSingle-Core

2.4 GHz and 2.6 GHz

2.4 GHz and 2.6 GHz2.4 GHz and 2.6 GHz models

models

modelsmodels

SmartStart is a tool that simplifies single server setup, providing a rapid way to deploy reliable and consistent server configurations. SmartStart 7.30 and later can now deploy all HP ProLiant BL25p server blades, using the I/O port with an attached USB CD-ROM device. To obtain a copy of SmartStart for your blade server, redeem the coupon that is included with your Blade server or order your copy from the SmartStart web site. For more information, please visit the SmartStart Web site at

http://www.hp.com/servers/smartstart

SmartStart version supported (minimum): SmartStart 6.20

Microsoft Windows 2000 Server Microsoft Windows 2000 Advanced Server Windows Server 2003, Standard Edition Windows Server 2003, Enterprise Edition Red Hat Enterprise Linux 3 Red Hat Enterprise Linux 4 SuSE Linux Enterprise Server 8 SuSE Linux Enterprise Server 9

NOTE:

For a complete and up-to-date listing of supported OSs and versions, please visit our OS

NOTE:NOTE: Support Matrix at: NOTE:

NOTE:

For an up-to-date listing of the latest drivers available for the HP ProLiant BL p-Class, please see:

NOTE:NOTE:

http://h18004.www1.hp.com/support/files/server/us/family/model/5342.html

NOTE:

For a more complete and up-to-date information on Linux support, please visit HP Linux Web

NOTE:NOTE: site at: http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html

http://www.hp.com/go/supportos

.

DA - 12160 North America — Version 7 — June 27, 2005

Page 16

QuickSpecs

Standard Features

OS Support:

OS Support:OS Support: Dual-Core

Dual-Core

Dual-CoreDual-Core

1.8 GHz, 2.0 GHz and

1.8 GHz, 2.0 GHz and1.8 GHz, 2.0 GHz and

2.2 GHz models

2.2 GHz models2.2 GHz models

Intelligent Manageability

Intelligent ManageabilityIntelligent Manageability

Microsoft Windows 2000 Server (licensed by core) Microsoft Windows 2000 Advanced Server (licensed by core) Windows Server 2003, Standard Edition (licensed by processor socket) Windows Server 2003, Enterprise Edition (licensed by processor socket) Red Hat Enterprise Linux 3 Update 5 Red Hat Enterprise Linux 4 Update 2 SuSE Linux Enterprise Server 9 SP1 NOTE:

NOTE:

For a complete and up-to-date listing of supported OSs and versions, please visit our OS

NOTE:NOTE: Support Matrix at: http://www.hp.com/go/supportos NOTE:

NOTE:

For an up-to-date listing of the latest drivers available for the HP ProLiant BL p-Class, please see

NOTE:NOTE:

http://h18004.www1.hp.com/support/files/server/us/family/model/5342.html

NOTE:

For a more complete and up-to-date information on Linux support, please visit HP Linux Web

NOTE:NOTE: site at: http://h18000.www1.hp.com/products/servers/linux/hpLinuxcert.html

Integrated Lights-Out Advanced (iLO)

Virtual Text and Graphical Remote Console * Virtual CD-ROM* Virtual Floppy * Virtual Power Button Control Dedicated LAN Connectivity Automatic IP Configuration via DHCP/DNS/WINS Industry Standard 128-bit Secure Sockets Layer (SSL) Security IML and iLO Event Logging Support for 12 user accounts with customizable access privileges

Automatic Server Recovery-2 (ASR-2) Insight Manager 7 HP Systems Insight Manager Redundant ROM Remote Flash ROM ROM Based Setup Utility (RBSU) Advanced Configuration and Power Interface Specification Ready (ACPI) Server and Interconnect Switch Health Logs Redundant Power Supply Utility Pre-Failure Warranty (covers processors, as well as hard drives and memory) Interconnect Switch Management System and Utilities (Interconnect Switch option) Integrated Management Log (IML) Off-Line Backup Processor capability Dynamic sector repairing and drive parameter tracking (with Smart Array controllers) Network adapter teaming set-up utility

* Advanced features such as Graphical Remote Console and Virtual Floppy are included with the BL pClass server.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

.

:

.

DA - 12160 North America — Version 7 — June 27, 2005

Page 17

QuickSpecs

Standard Features

Availability

AvailabilityAvailability

Power redundancy: Redundant AC feeds into power enclosures, redundant DC feeds from power enclosure to server blade enclosures, N + N redundant power supplies Dual-Port Fibre Channel Mezzanine Card for redundant SAN connection Two hot-plug SCSI hard drive bays and integrated RAID (Smart Array 6i Plus) on every server blade (Battery-backed write cache is optional.) Redundant ROM on each server blade ECC Memory Network adapter teaming (network fault tolerance, transmit load balancing, switch-assisted load balancing) Interconnects Switch Availability

Hot-plug and hot- remove with configuration retention and no need to cable/re-cable Two network connections per server blade bay (four NICs total) routed to two redundant interconnect switches Redundant Ethernet inter-switch communication with two sets of redundant Ethernet uplink ports per each interconnect switch Redundant front panel ports per each interconnect switch for diagnostics, management, and additional uplinks Redundant serial ports Compatibility with PVST+ (CGESM or GbE2 switch) and 802.1D Spanning tree protocol support for loop-free path redundancy Static IEEE 802.3ad (EtherChannel compatible) trunking with automatic port load balancing and failover Redundant configuration files and operating system firmware images in memory (GbE2 switch) Redundant fans per each interconnect switch Redundant 1+1 power to each interconnect switch Support for ProLiant network adapter teaming Redundant configurable community strings and SNMP trap manager hosts Redundant configurable syslog server, DNS server, and default gateways (GbE2 switch)

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Security

SecuritySecurity

Power-on password Administrator's password Integrated Lights-Out has 12 customizable user accounts and SSL encryption Integrated Lights-Out can be disabled via a Global Setting Interconnect switch multilevel user names and passwords, management interface time out period setting, SSH*, SCP secure copy protocol*, port-based IEEE 802.1Q tagged VLANs, RADIUS user authentication and authorization*, and IP address restriction

* CGESM and GbE2 Interconnect Switch only

DA - 12160 North America — Version 7 — June 27, 2005

Page 18

QuickSpecs

Standard Features

Minimum Rack

Minimum RackMinimum Rack Requirements

Requirements

RequirementsRequirements

Rack Airflow

Rack AirflowRack Airflow Requirements

Requirements

RequirementsRequirements

Mounts in ProLiant, and Telco racks and Third Party racks that meet the following criteria:

Compatible with 19-inch Standard EIA rail sets EIA rail-to-rail depth is 29 - 30" Cabinet depth must be at least 36-inch deep overall (Additional min. 3.5-inch clearance from rear RETMA rail to rear door, inclusive in the 36-inch overall depth) Ample room for top and bottom cable egress (approximately 8 square inches for full rack configuration with patch panel) Must be capable of supporting 1600 lb (for full rack configuration) Perforated front and rear doors to accommodate front-to-back cooling Must have 65% open perforation on server blade enclosure doors to support airflow requirements Optimized for use with the HP 10000 Series racks

NOTE:

If using Compaq 7000 Series rack, Rack Extension Kit and High Air Flow Rack Door options are

NOTE:NOTE: required.

Rack 10000 series Cabinets

Rack 10000 series CabinetsRack 10000 series Cabinets The increasing power of new high-performance processor technology requires increased cooling efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

CAUTION:

CAUTION:CAUTION: adequate airflow and to prevent damage to the equipment:

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to permit adequate airflow (equivalent to the required 64 percent open area for ventilation). Side: The clearance between the installed rack component and the side panels of the rack must be a minimum of 2.75 inches (7 cm).

CAUTION:

CAUTION:CAUTION: arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling that can lead to thermal damage.

NOTE:

NOTE: NOTE: provided with the server, or to the server documentation located in the Support section at the following URL:

http://www.hp.com/servers/bl25p

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

If a third-party rack is used, observe the following additional requirements to ensure

Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This

For additional information, refer to the Setup and Installation Guide or the Documentation CD

.

Factory Express Portfolio

Factory Express PortfolioFactory Express Portfolio for Servers and Storage

for Servers and Storage

for Servers and Storagefor Servers and Storage

HP Factory Express offers configuration, customization, integration and deployment services for HP servers and storage products. Customers can choose how their factory solutions are built, tested, integrated, shipped and deployed.

Factory Express offers service packages for simple configuration, racking, installation, complex configuration and design services as well as individual factory services, such as image loading, asset tagging and custom packaging. HP products supported through Factory Express include: a wide array of servers and storage: HP Integrity, HP ProLiant & HP ProLiant Server Blades, HP BladeSystem, HP 9000 servers as well as the MSA1000, VA7xxx, EVA3000 & EVA5000, XP, rackable tape libraries and configurable network switches.

For more information on Factory Express services for your specific server model please contact your sales representative or go to

DA - 12160 North America — Version 7 — June 27, 2005

http://www.hp.com/go/factory-express

.

Page 19

QuickSpecs

Standard Features

Service and Support

Service and SupportService and Support

Three-year limited warranty, including hardware diagnostic support, pre-failure warranty (coverage of hard drives, memory and processors). The warranty is fully supported by HP Services and a worldwide network of resellers and service providers. In addition 90-day's getting started software telephone support may be covered under the warranty or available for an additional fee. Enhancements to warranty services are available through HP Care Pack services.

NOTE:

Sever Blade Limited Warranty includes 3 year Parts, 3 year Labor, 3-year on-site support.

NOTE:NOTE: NOTE:

NOTE:

Server Blade Enclosure and Interconnects Limited Warranty includes 3 year Parts, 3 year Labor,

NOTE:NOTE: 3-year on-site support.

Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical.

A full range of HP Care Pack hardware and software services are available including:

Installation and start up Education courses Extended onsite hardware coverage hours from same business day 13 hours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call To Repair Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials and VMWare-based IT solutions helping to deliver high level of application availability. Response times range from 30 mins for critical problems to 2 hours. System Management, Performance Services and Mission Critical Support Solution

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

HP Care Pack services for ProLiant BL p-Class server blades, cover the server blade and the HP BladeSystem p-Class blade enclosure that the server blade is installed in as well as interconnects, power enclosure with power supplies and power distribution.

NOTE:

For more information on HP Care Pack services, contact any of our worldwide sales offices or

NOTE:NOTE: resellers or visit our worldwide Web site on the internet at: NOTE:

NOTE:

For more complete information on HP Services offerings, customers and resellers, please visit us

NOTE:NOTE: at:

http://www.hp.com/hps

NOTE:

Additional information regarding worldwide limited warranty and technical support is available

NOTE:NOTE: at:

http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html

http://www.hp.com/hps/carepack

DA - 12160 North America — Version 7 — June 27, 2005

Page 20

QuickSpecs

Models

ProLiant BL25p 1.8GHz-

ProLiant BL25p 1.8GHz-ProLiant BL25p 1.8GHz1MB,DC 1GB (1P)

1MB,DC 1GB (1P)

1MB,DC 1GB (1P)1MB,DC 1GB (1P) 392443-B21

ProLiant BL25p 2.0GHz-

ProLiant BL25p 2.0GHz-ProLiant BL25p 2.0GHz1MB, DC 2GB (2P)

1MB, DC 2GB (2P)

1MB, DC 2GB (2P)1MB, DC 2GB (2P) 392441-B21

Processor(s)

Processor(s)Processor(s)

Cache Memory

Cache MemoryCache Memory Memory

Memory

MemoryMemory

Network Adapter

Network AdapterNetwork Adapter

Storage Controller

Storage ControllerStorage Controller Hard Drives

Hard Drives

Hard DrivesHard Drives Internal Storage

Internal Storage

Internal StorageInternal Storage Optical Drive

Optical Drive

Optical DriveOptical Drive Form Factor

Form Factor

Form FactorForm Factor

Processor(s)

Processor(s)Processor(s)

Cache Memory

Cache MemoryCache Memory Memory

Memory

MemoryMemory

Network Adapter

Network AdapterNetwork Adapter

Storage Controller

Storage ControllerStorage Controller Hard Drives

Hard Drives

Hard DrivesHard Drives Internal Storage

Internal Storage

Internal StorageInternal Storage Optical Drive

Optical Drive

Optical DriveOptical Drive Form Factor

Form Factor

Form FactorForm Factor

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

(1) AMD Opteron Model 265 dual-core 1.8 GHz standard (up to 2 supported)

1-MB Level 2 cache per core 1024-MB (Standard) to 16-GB (Maximum) of 2-way interleaved capable

PC3200 DDR SDRAM running at 400MHz (2x512 MB) Four Gigabit NICs (embedded) with WOL and PXE

One additional 10/100 NIC dedicated to iLO Management Smart Array 6i Controller (integrated on system board) None ship standard Up to 600-GB maximum (with optional hard drives) None Plugs vertically into HP BladeSystem p-Class Server Blade Enclosure

(2) AMD Opteron Model 270 dual-core 2.0 GHz standard (up to 2 supported)

1-MB Level 2 cache per core 2048-MB (Standard) to 16-GB (Maximum) of 2-way interleaved capable

PC3200 DDR SDRAM running at 400MHz (4x512 MB) Four Gigabit NICs (embedded) with WOL and PXE

One additional 10/100 NIC dedicated to iLO Management Smart Array 6i Controller (integrated on system board) None ship standard Up to 600-GB maximum (with optional hard drives) None Plugs vertically into HP BladeSystem p-Class Server Blade Enclosure

ProLiant BL25p 2.2GHz-

ProLiant BL25p 2.2GHz-ProLiant BL25p 2.2GHz1MB, DC 2GB (2P)

1MB, DC 2GB (2P)

1MB, DC 2GB (2P)1MB, DC 2GB (2P) 392439-B21

Processor(s)

Processor(s)Processor(s)

Cache Memory

Cache MemoryCache Memory Memory

Memory

MemoryMemory

Network Adapter

Network AdapterNetwork Adapter

Storage Controller

Storage ControllerStorage Controller Hard Drives

Hard Drives

Hard DrivesHard Drives Internal Storage

Internal Storage

Internal StorageInternal Storage Optical Drive

Optical Drive

Optical DriveOptical Drive Form Factor

Form Factor

Form FactorForm Factor

DA - 12160 North America — Version 7 — June 27, 2005

(2) AMD Opteron Model 275 dual-core 2.2 GHz standard (up to 2 supported)

1-MB Level 2 cache per core 2048-MB (Standard) to 16-GB (Maximum) of 2-way interleaved capable

PC3200 DDR SDRAM running at 400MHz (4x512 MB) Four Gigabit NICs (embedded) with WOL and PXE

One additional 10/100 NIC dedicated to iLO Management Smart Array 6i Controller (integrated on system board) None ship standard Up to 600-GB maximum (with optional hard drives) None Plugs vertically into HP BladeSystem p-Class Server Blade Enclosure

Page 21

QuickSpecs

Models

ProLiant BL25p 2.4GHz-

ProLiant BL25p 2.4GHz-ProLiant BL25p 2.4GHz1MB, 1GB (1P)

1MB, 1GB (1P)

1MB, 1GB (1P)1MB, 1GB (1P) 374797-B21

ProLiant BL25p 2.6GHz-

ProLiant BL25p 2.6GHz-ProLiant BL25p 2.6GHz1MB, 1GB (1P)

1MB, 1GB (1P)

1MB, 1GB (1P)1MB, 1GB (1P) 374798-B21

Processor(s)

Processor(s)Processor(s)

Cache Memory

Cache MemoryCache Memory Memory

Memory

MemoryMemory

Network Adapter

Network AdapterNetwork Adapter

Storage Controller

Storage ControllerStorage Controller Hard Drives

Hard Drives

Hard DrivesHard Drives Internal Storage

Internal Storage

Internal StorageInternal Storage Optical Drive

Optical Drive

Optical DriveOptical Drive Form Factor

Form Factor

Form FactorForm Factor

Processor(s)

Processor(s)Processor(s)

Cache Memory

Cache MemoryCache Memory Memory

Memory

MemoryMemory

Network Adapter

Network AdapterNetwork Adapter

Storage Controller

Storage ControllerStorage Controller Hard Drives

Hard Drives

Hard DrivesHard Drives Internal Storage

Internal Storage

Internal StorageInternal Storage Optical Drive

Optical Drive

Optical DriveOptical Drive Form Factor

Form Factor

Form FactorForm Factor

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

(1) AMD Opteron Model 250 single-core 2.4 GHz standard (up to 2 supported)

1-MB Level 2 cache per core 1024-MB (Standard) to 16-GB (Maximum) of 2-way interleaved capable

PC3200 DDR SDRAM running at 400MHz (2x512MB) Four Gigabit NICs (embedded) with WOL and PXE

One additional 10/100 NIC dedicated to iLO Management Smart Array 6i Controller (integrated on system board) None ship standard Up to 600-GB maximum (with optional hard drives) None Plugs vertically into HP BladeSystem p-Class Server Blade Enclosure

(1) AMD Opteron Model 252 single-core 2.6 GHz standard (up to 2 supported)

1-MB Level 2 cache per core 1024-MB (Standard) to 16-GB (Maximum) of 2-way interleaved capable

PC3200 DDR SDRAM running at 400MHz (2x512MB) Four Gigabit NICs (embedded) with WOL and PXE

One additional 10/100 NIC dedicated to iLO Management Smart Array 6i Controller (integrated on system board) None ship standard Up to 600-GB maximum (with optional hard drives) None Plugs vertically into HP BladeSystem p-Class Server Blade Enclosure

ProLiant BL25p 2.6Ghz-

ProLiant BL25p 2.6Ghz-ProLiant BL25p 2.6Ghz1MB, 2GB (2P)

1MB, 2GB (2P)

1MB, 2GB (2P)1MB, 2GB (2P) 374799-B21

Processor(s)

Processor(s)Processor(s)

Cache Memory

Cache MemoryCache Memory Memory

Memory

MemoryMemory

Network Adapter

Network AdapterNetwork Adapter

Storage Controller

Storage ControllerStorage Controller Hard Drives

Hard Drives

Hard DrivesHard Drives Internal Storage

Internal Storage

Internal StorageInternal Storage Optical Drive

Optical Drive

Optical DriveOptical Drive Form Factor

Form Factor

Form FactorForm Factor

DA - 12160 North America — Version 7 — June 27, 2005

(2) AMD Opteron Model 252 single-core 2.6 GHz standard (up to 2 supported)

1-MB Level 2 cache per core 2048-MB (Standard) to 16-GB (Maximum) of 2-way interleaved capable

PC3200 DDR SDRAM running at 400MHz (4x512MB) Four Gigabit NICs (embedded) with WOL and PXE

One additional 10/100 NIC dedicated to iLO Management Smart Array 6i Controller (integrated on system board) None ship standard Up to 600-GB maximum (with optional hard drives) None Plugs vertically into HP BladeSystem p-Class Server Blade Enclosure

Page 22

QuickSpecs

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Configuration Information Factory Integrated Models

NOTE:

NOTE: NOTE: Configure-to-order servers must start with a CTO Chassis.

NOTE:

NOTE: NOTE:

Step 1: Base Server Blade Configuration

Step 1: Base Server Blade ConfigurationStep 1: Base Server Blade Configuration

Models

ModelsModels

Step 2: Choose Required Options (one of the following from each list unless otherwise

Step 2: Choose Required Options (one of the following from each list unless otherwiseStep 2: Choose Required Options (one of the following from each list unless otherwise noted):

noted):

noted):noted):

Processors

ProcessorsProcessors

Memory

MemoryMemory

Communications

CommunicationsCommunications

HP does not allow factory integration of options into standard models listed above.

This product offering does not support HP Factory Express Server Configuration Level 1.

HP ProLiant BL25p CTO Blade Configurable Model ships with:

Configurable Model ships with:

Configurable Model ships with:Configurable Model ships with: One additional 10/100 NIC dedicated to iLO Management Four Gigabit NICs

(embedded) with WOL and PXE

NOTE:

Two can be upgraded to multifunction network adapters)

NOTE:NOTE:

One additional 10/100 NIC dedicated to iLO Management

HP BL25p 0265 1.8GHz DC FIO Base HP BL25p 0270 2.0GHz DC FIO Base HP BL25p 0275 2.2GHz DC FIO Base HP BL25p O252 2.6GHz SC FIO Base HP BL25p O250 2.4GHz SC FIO Base For dual processor configurations choose one of the above FIO choices, plus one of

the matching option kits below: HP BL25p Opteron 2.2GHz-1M DC Processor Option Kit HP BL25p Opteron 2.0GHz-1M DC Processor Option Kit HP BL25p Opteron 1.8GHz-1M DC Processor Option Kit HP BL25p Opteron 2.6GHz-1M SC Processor Option Kit HP BL25p Opteron 2.4GHz-1M SC Processor Option Kit

NOTE:

Two-way memory interleaving is enabled when an identical pair of DIMMs is

NOTE:NOTE: installed.

1GB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 512 MB)

NOTE:

Must install in pairs

NOTE:NOTE:

2GB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 1 GB) 4GB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 2 GB)

NOTE:

NOTE: NOTE:

HP ProLiant BL25/35/45p NIC Mezz FIO Base

Must install in pairs

382731-405

392444-L21 392442-L21 392440-L21 381588-L21 381587-L21

392440-B21 392442-B21 392444-B21 381588-B21 381587-B21

376638-B21

376639-B21 379300-B21

382850-B21

Step 3: Choose Additional Factory Integratable Options

Step 3: Choose Additional Factory Integratable OptionsStep 3: Choose Additional Factory Integratable Options

Fibre Channel Options

Fibre Channel OptionsFibre Channel Options

Step 4: Choose Additional Options for Factory Integration

Step 4: Choose Additional Options for Factory IntegrationStep 4: Choose Additional Options for Factory Integration

NOTE:

NOTE: NOTE: subsystem options, please refer to the "Options" section below.

For additional options, including server blade enclosure with enhanced backplanes, interconnect options and power

FC Adapter Card BL25p/45p

DA - 12160 North America — Version 7 — June 27, 2005

381881-B21

Page 23

QuickSpecs

Options

ProLiant Essentials

ProLiant EssentialsProLiant Essentials Value Pack Software

Value Pack Software

Value Pack SoftwareValue Pack Software

ProLiant Essentials Vulnerability and Patch Management Pack, 1 Server + 10Desktop Bundle License

ProLiant Essentials Vulnerability and Patch Management Pack, Single-Server License ProLiant Essentials Vulnerability and Patch Management Pack, 10-Server License ProLiant Essentials Vulnerability and Patch Management Pack, Flexible-Quantity

License ProLiant Essentials Vulnerability and Patch Management Pack, Tracking License for

New Servers ProLiant Essentials Vulnerability and Patch Management Pack, Tracking License for

Installed servers ProLiant Essentials Server Migration Pack, 25-Server License ProLiant Essentials Server Migration Pack, 50-Server License ProLiant Essentials Server Migration Pack, 100-Server License ProLiant Essentials Server Migration Pack, 10-Server License

NOTE:

This license allows 10 servers to be migrated from a physical server to 10

NOTE:NOTE: virtual machines. Or this license can be used to migrate 10 virtual machines from one virtualization layer i.e. VMware GSX to a different virtualization layer such as VMware ESX or Microsoft Virtual Server 2005.

ProLiant Essentials Server Migration Pack, Single-Server License ProLiant Essentials Server Migration Pack, Flexible-Quantity License ProLiant Essentials Server Migration Pack, Tracking license ProLiant Essentials Virtual Machine Management Pack, SINGLE LIC IP CCAO-

WGR ProLiant Essentials Virtual Machine Management Pack, FLEX LIC IP CCAO-WGR ProLiant Essentials Virtual Machine Management Pack, TRACKING LIC IP CCAO-

WGR ProLiant Essentials Intelligent Networking Pack, Single Server License

NOTE:

NOTE: NOTE: activation key and documentation.

ProLiant Essentials Intelligent Networking Pack, Flexible License

NOTE:

NOTE: NOTE: multiple licenses with a single activation key. The quantity ordered for this part number will be the quantity of licenses included in the kit in the form of a corresponding activation key. Use the same key to activate all licenses in the actual quantity ordered. For a given order, one kit will be delivered with the activation key, and documentation.

ProLiant Essentials Intelligent Networking Pack, Tracking License

NOTE:

NOTE: NOTE: Purchase of this part number entitles the customer to deploy additional licenses of the product under the terms of the existing Activation Key Agreement. NOTE:

NOTE:

Nothing is delivered in conjunction with the purchase of this part number. Visit

NOTE:NOTE:

http://h18004.www1.hp.com/products/servers/proliantessentials/license/akalic.html

for more information on Activation Key Agreements.

ProLiant Essentials Performance Management Pack, Single-Server License

NOTE:

For use with a single server. Contains one license with a unique license

NOTE:NOTE: activation key and documentation.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

For use with a single server. Contains one license with a unique license

For use with multiple servers. This part number can be used to purchase

For use with signed and implemented Activation Key Agreements only.

389941-B21

371645-B21 372029-B21 371646-B21

371647-B21

378372-B21

391674-B21 391675-B21 391676-B21 390739-B21

375345-B21 375346-B21 375347-B21 372214-B21

372215-B21 372216-B21

372906-B21

372950-B21

372951-B21

306696-B21

DA - 12160 North America — Version 7 — June 27, 2005

Page 24

QuickSpecs

Options

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

ProLiant Essentials Performance Management Pack, 10-Server License

NOTE:

For use with up to 10 servers. Contains 10 licenses with one unique license

NOTE:NOTE: activation key and documentation.

ProLiant Essentials Performance Management Pack, Flexible-Quantity License

NOTE:

For use with multiple servers. This part number can be used to purchase

NOTE:NOTE: multiple licenses with a single activation key. The quantity ordered of this part number will be the quantity of licenses included in the kit in the form of a corresponding activation key. Use the same key to activate all licenses in the actual quantity ordered. For a given order, one kit will be delivered with activation key, and documentation.

ProLiant Essentials Performance Management Pack, Tracking license

NOTE:

NOTE: NOTE: Purchase of this part number entitles the customer to deploy additional licenses of the product under the terms of the existing Activation Key Agreement. NOTE:

NOTE:

NOTE:NOTE:

http://h18004.www1.hp.com/products/servers/proliantessentials/license/akalic.html

for more information on Activation Key Agreements.

Rapid Deployment Pack, 10 User, V1.x

NOTE:

NOTE: NOTE: Deployment Server. NOTE:

NOTE:

NOTE: NOTE: Deployment Pack licenses 281404-B21. NOTE:

NOTE:

NOTE: NOTE: NOTE:

NOTE:

NOTE: NOTE: Deployment Server. NOTE:

NOTE:

NOTE: NOTE: Deployment Pack licenses 281404-B21. NOTE:

NOTE:

NOTE: NOTE:

Rapid Deployment Pack, 1 User, V1.x

NOTE:

NOTE: NOTE: Server. NOTE:

NOTE:

NOTE: NOTE: Deployment Pack licenses 281404-B21. NOTE:

NOTE:

NOTE: NOTE: NOTE:

NOTE:

NOTE: NOTE: Server. NOTE:

NOTE:

NOTE: NOTE: Deployment Pack licenses 281404-B21. NOTE:

NOTE:

NOTE: NOTE:

Flexible Quantity License Kit License-Only - for use with a Master License Agreement ProLiant Essentials Workload Management Pack (Featuring Resource Partitioning

Manager version 2.0)

NOTE:

NOTE:NOTE: following URL:

NOTE:

NOTE:NOTE: Value Packs. Refer to URL ProLiant Essentials Value Pack product QuickSpecs for more information.

For use with signed and implemented Activation Key Agreements only.

Nothing is delivered in conjunction with the purchase of this part number. Visit

This license allows 10 servers to be managed and deployed via the

Not necessary if you purchase the server blade enclosure with 8 Rapid

Rapid Deployment pack is now available in Linux only environments. This license allows 10 servers to be managed and deployed via the

Not necessary if you purchase the server blade enclosure with 8 Rapid

Rapid Deployment pack is now available in Linux only environments.

This license allows 1 server to be managed and deployed via the Deployment

Not necessary if you purchase the server blade enclosure with 8 Rapid

Rapid Deployment pack is now available in Linux only environments. This license allows 1 server to be managed and deployed via the Deployment

Not necessary if you purchase the server blade enclosure with 8 Rapid

Rapid Deployment pack is now available in Linux only environments.

For more information regarding ProLiant Essentials Software, please see the

http://hp.com/servers/proliantessentials

Flexible and volume quantity license kits are available for ProLiant Essentials

http://hp.com/servers/proliantessentials

.

or the various

374055-B21

306697-B21

306698-B21

269817-B21

267196-B21

302127-B21 302128-B21 303284-B21

DA - 12160 North America — Version 7 — June 27, 2005

Page 25

QuickSpecs

Options

Processor

ProcessorProcessor

Memory

MemoryMemory (SDRAM DIMMs)

Hard Drives

Hard DrivesHard Drives

HP BL25p Opteron 2.2GHz-1M DC Processor Option Kit HP BL25p Opteron 2.0GHz-1M DC Processor Option Kit HP BL25p Opteron 1.8GHz-1M DC Processor Option Kit HP BL25p Opteron 2.6GHz-1M SC Processor Option Kit HP BL25p Opteron 2.4GHz-1M SC Processor Option Kit

4GB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 2 GB) 2GB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 1 GB) 1GB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 512 MB)

Ultra320 SCSI – Universal Hot Plug

Ultra320 SCSI – Universal Hot PlugUltra320 SCSI – Universal Hot Plug

300-GB 10,000 rpm U320 Universal Hard Drive (1")

146.8-GB 10,000 rpm U320 Universal Hard Drive (1")

72.8-GB 10,000 rpm U320 Universal Hard Drive (1")

72.8-GB 15,000 rpm U320 Universal Hard Drive (1")

146.8-GB 15,000 rpm U320 Universal Hard Drive (1")

36.4-GB 15,000 rpm U320 Universal Hard Drive (1")

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

392440-B21 392442-B21 392444-B21 381588-B21 381587-B21

379300-B21 376639-B21 376638-B21

350964-B22 286716-B22 286714-B22 286778-B22 347708-B22 286776-B22

Storage Controllers

Storage ControllersStorage Controllers

ProLiant BL25/45p Fibre

ProLiant BL25/45p FibreProLiant BL25/45p Fibre Channel

Channel

ChannelChannel Adapter

Adapter

AdapterAdapter

128MB Battery Backed Write Cache Enabler Option Kit

NOTE:

Please see the following Controller QuickSpecs for Technical Specifications

NOTE:NOTE: such as PCI Bus, PCI Peak Data Transfer Rate, SCSI Protocols supported, SCSI Peak Data Transfer Rate, Channels, SCSI Ports, Drives supported, Cache, RAID support, and additional information:

http://h18000.www1.hp.com/products/quickspecs/12030_na/12030_na.HTML

(Smart Array 6i)

Dual port Fibre Channel Adapter (2-Gb) for HP ProLiant BL25p server blade (shared with the HP ProLiant BL45p server blade)

NOTE:

When using this card, the Patch Panel 2, CGESM, or GbE2 Interconnect

NOTE:NOTE: Switch (with Storage Connectivity Kit) must be used to provide the Fibre Channel pass through. NOTE:

NOTE:

The BL30p/35p and BL20p dual-port Fibre Channel adapters are not

NOTE:NOTE: compatible with the HP ProLiant BL25p server blade.

346914-B21

381881-B21

DA - 12160 North America — Version 7 — June 27, 2005

Page 26

QuickSpecs

Options

HP BladeSystem

HP BladeSystemHP BladeSystem p-Class Server Blade

p-Class Server Blade

p-Class Server Bladep-Class Server Blade Enclosures

Enclosures

EnclosuresEnclosures

HP BladeSystem p-Class Server Blade Enclosure with enhanced backplane components and the HP BladeSystem Management Suite

NOTE:

NOTE: NOTE: backplane components, a single copy of Systems Insight Manager (SIM) and 8 licenses for each of the following products: Rapid Deployment Pack (RDP), Performance Management Pack (PMP) and the Vulnerability and Patch Management Pack (VPM). NOTE:

NOTE:

The HP ProLiant BL25p server blade does not currently support PMP. Future

NOTE:NOTE: support is planned.

HP BladeSystem p-Class Server Blade Enclosure with enhanced backplane components (ProLiant Essentials Rapid Deployment Pack Trial)

HP BladeSystem p-Class Server Blade Enclosure with enhanced backplane components (8 ProLiant Essentials Rapid Deployment Licenses)

NOTE:

NOTE: NOTE: backplane components may be required depending on which HP ProLiant BL25p server blade model is selected. For additional information regarding Blade Enclosure Compatibility, please visit the following URL:

HP BladeSystem p-Class Server Blade Enclosure Upgrade Kit (option)

NOTE:

Server Blade Enclosure Upgrade Kit (354100-B21) contains enhanced

NOTE:NOTE: backplane components and enables a field upgrade of a blade enclosure to support BL p-class blades and provide a single, physical iLO port for the enclosure.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Includes a HP BladeSystem p-Class Server Blade Enclosure with enhanced

HP BladeSystem p-Class Enhanced Server Blade Enclosures with enhanced

http://www.hp.com/go/bladesystem/enclosure/compatibility

380625-B22

243564-B22

281404-B22

354100-B21

HP BladeSystem

HP BladeSystemHP BladeSystem p-Class Interconnects

p-Class Interconnects

p-Class Interconnectsp-Class Interconnects

ProLiant BL p-Class RJ-45 Patch Panel 2 with Fibre pass-through (pair) (required for FC connectivity)

NOTE:

NOTE: NOTE:

ProLiant BL p-Class RJ-45 Patch Panel (pair)

NOTE:

NOTE: NOTE:

ProLiant BL p-Class C-GbE2 Interconnect Kit (with pair of GbE2 Interconnect Switches and two QuadT2 Interconnect Modules)

NOTE:

NOTE: NOTE:

ProLiant BL p-Class F-GbE2 Interconnect Kit (with pair of GbE2 Interconnect Switches and two QuadSX Interconnect Modules)

NOTE:

NOTE:NOTE:

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Interconnect Kit Base Unit only

NOTE:

NOTE: NOTE:

Cisco Gigabit Ethernet Switch Module for HP BladeSystem p-Class Interconnect Kit Base Unit (populated with two RJ-45 10/100/1000 T/TX/T Small Form Factor Pluggable (SFP) Modules

NOTE:

NOTE: NOTE:

Cisco RJ-45 10/100/1000 T/TX/T SFP Module Cisco Fiber SX SFP Module ProLiant BL p-Class Storage Connectivity Kit (with pair of OctalFC Interconnect

Modules and two Fibre Channel signal conditioning cards)

Only one interconnect kit required per server blade enclosure.

Two CGESM interconnect kits required per server blade enclosure.

306465-B21

230766-B21

283192-B21

283193-B21

378926-B21

378927-B21

378928-B21 378929-B21 321745-B21

DA - 12160 North America — Version 7 — June 27, 2005

Page 27

QuickSpecs

Options

NOTE:

NOTE: NOTE: CGESM or GbE2 Interconnect Switch. NOTE:

NOTE:

NOTE: NOTE: NOTE:

NOTE:

NOTE: NOTE:

ProLiant BL p-Class C-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two QuadT Interconnect Modules)

NOTE:

Only one interconnect kit required per server blade enclosure.

NOTE:NOTE: NOTE:

NOTE:

The GbE Interconnect Switch supports server NIC speeds to 100 Mbps. It is

NOTE:NOTE: recommended that a patch panel or GbE2 Interconnect Switch option be used if server NIC speeds to 1000 Mbps are required. NOTE:

NOTE:

To meet applicable radio frequency (RF) emission limits, the sidewall panels

NOTE:NOTE: on the ends of any individual rack or a series of coupled racks and the front and rear doors must be installed in any racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.

ProLiant BL p-Class F-GbE Interconnect Kit (with pair of GbE Interconnect Switches and two DualTSX Interconnect Modules)

NOTE:

Only one interconnect kit required per server blade enclosure.

NOTE:NOTE: NOTE:

NOTE:

The GbE Interconnect Switch supports server NIC speeds to 100 Mbps. It is

NOTE:NOTE: recommended that a patch panel option be used if server NIC speeds to 1000 Mbps are required. NOTE:

NOTE:

To meet applicable radio frequency (RF) emission limits, the sidewall panels

NOTE:NOTE: on the ends of any individual rack or a series of coupled racks and the front and rear doors must be installed in any racks containing more than one ProLiant BL p-Class GbE Interconnect Kit.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Required for BL20P G3 Fibre Channel signal pass through when using the

Only one Storage Connectivity Kit required per each GbE2 Interconnect Kit. Only one Storage Connectivity Kit required for (2) CGESM Interconnect Kit.

249655-B21

279720-B21

HP BladeSystem p-Class

HP BladeSystem p-ClassHP BladeSystem p-Class Power Options

Power Options

Power OptionsPower Options

NOTE:

NOTE: NOTE:

http://h30099.www3.hp.com/configurator/powercalcs.asp

Single Phase 3U Power Enclosure with 4 power supplies (Single Phase 3U Power Enclosure holds a maximum of 4 power supplies; no need to order additional power supplies with this option kit)

3 Phase 3U Power Enclosure with 6 power supplies (3 Phase 3U Power Enclosure holds a maximum of 6 power supplies; no need to order additional power supplies with this option kit)

Single Phase 3U Power Enclosure (empty) (Holds up to 4 power supplies; power supplies are not included in this kit)

3 Phase 3U Power Enclosure (empty) (Holds up to 6 power supplies; power supplies are not included in this kit)

Single 3U Power Supply 1U Power Enclosure with six power supplies 1U Power Enclosure with two power supplies Single 1U Power Supply Facility DC Power Connection

Use p-Class sizing tool to help determine power configuration:

239162-001

230769-001

231710-001

231709-001

239161-B21 378284-B21 380314-B21 380312-B21 240563-B21

DA - 12160 North America — Version 7 — June 27, 2005

Page 28

QuickSpecs

Options

Power Distribution (only

Power Distribution (onlyPower Distribution (only required with 3U power

required with 3U power

required with 3U powerrequired with 3U power enclosures)

enclosures)

enclosures)enclosures)

SAN Switches

SAN SwitchesSAN Switches

HP BladeSystem p-Class Scalable Bus Bar HP BladeSystem p-Class Mini Bus Bar HP BladeSystem p-Class Bus Power Box Dual Power Input Kit for Mini Bus Bar HP Modular Distribution Unit 40 Amp HP Modular Distribution Unit 24 Amp

NOTE:

The Modular Distribution Unit Kits excludes the extension bars as they are not

NOTE:NOTE: required with the HP BladeSystem p-class 1U power enclosure.

HP BladeSystem Power Extension Kit

NOTE:

This kit is specifically for HP BladeSystem p-Class customers who want to

NOTE:NOTE: upgrade their standard server blade enclosures to enhanced server blade enclosures and would like to install an additional, redundant 3U power enclosure above the server blade enclosures rather than below them. The option kit consists of two extension cable assemblies - one for each side (A and B).

Brocade 4GB SAN Switch, Base Brocade 4GB SAN Switch, full fabric Brocade 4GB SAN Switch, power pack McDATA 4Gb SAN Switch

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

240560-B21 240559-B21 240562-B21

364565-B21 252663-D75 252663-D74

381686-B21

A7533A A7534A A7535A A8001A

Other Options

Other OptionsOther Options

Tape Libraries

Tape LibrariesTape Libraries

HP BladeSystem p-Class Diagnostic Station

NOTE:

The Diagnostic Station allows access to the ProLiant BL20p server blade and

NOTE:NOTE: the BL p-Class interconnect switch outside of the server enclosure. The option provides power and a data interface so that "offline" upgrade and diagnostic functions may be performed.

HP BladeSystem p-Class Power Enclosure Shipping Bracket Option Kit

NOTE:

NOTE: NOTE:

HP StorageWorks MSL6000 Tape Library

HP StorageWorks MSL6000 Tape LibraryHP StorageWorks MSL6000 Tape Library Ultrium 960 technology

Ultrium 960 technology

Ultrium 960 technologyUltrium 960 technology MSL6030, 1 drive, 30 slots, Ultrium 960 AD606A MSL6030, 2 drive, 30 slots, Ultrium 960 AD607A MSL6030, 1 drive, 30 slots, Ultrium 960, with embedded FC router MSL6030, 2 drive, 30 slots, Ultrium 960, with embedded FC router MSL6060, 2 drive, 60 slots, Ultrium 960 AD610A MSL6060, 2 drive, 60 slots, Ultrium 960, with embedded FC router SDLT 600 technology

SDLT 600 technology

SDLT 600 technologySDLT 600 technology MSL6026, 1 drive, 26 slots, SDLT 600 MSL6026, 2 drive, 26 slots, SDLT 600 MSL6026, 1 drive, 26 slots, SDLT 600, with embedded FC router MSL6026, 2 drive, 26 slots, SDLT 600, with embedded FC router MSL6052, 2 drive, 52 slots, SDLT 600 MSL6052, 2 drive, 52 slots, SDLT 600, with embedded FC router Ultrium 460 technology

Ultrium 460 technology

Ultrium 460 technologyUltrium 460 technology

Used to secure one power enclosure in a rack when moving

230743-B21

365044-B21

AD608A AD609A

AD611A

AD582A AD583A AD584A AD585A AD587A AD588A

DA - 12160 North America — Version 7 — June 27, 2005

Page 29

QuickSpecs

Options

MSL6030, 1 drive, 30 slots, Ultrium 460 AD598A MSL6030, 2 drive, 30 slots, Ultrium 460 AD599A MSL6030, 1 drive, 30 slots, Ultrium 460, with embedded FC router MSL6030, 2 drive, 30 slots, Ultrium 460, with embedded FC router MSL6060, 2 drive, 60 slot Ultrium 460, with embedded FC router

NOTE:

NOTE: NOTE:

http://www.hp.com/go/automation

complete solution; reference current compatibility information at

http://www.hp.com/go/ebs

HP StorageWorks MSL5026S2 Tape Library

HP StorageWorks MSL5026S2 Tape LibraryHP StorageWorks MSL5026S2 Tape Library MSL5026S2, 1 drive, 26 slots, SDLT 320, RM MSL5026S2, 2 drive, 26 slots, SDLT 320, RM MSL5026S2, 1 drive, 26 slots, SDLT 320, RM with embedded FC router MSL5026S2, 2 drive, 26 slots, SDLT 320, RM with embedded FC router

NOTE:

Please reference the MSL5026S2 Tape Library QuickSpecs at

NOTE:NOTE:

http://www.hp.com/go/automation

complete solution; reference current compatibility information at

http://www.hp.com/go/ebs

HP StorageWorks MSL5052S2 Tape Library

HP StorageWorks MSL5052S2 Tape LibraryHP StorageWorks MSL5052S2 Tape Library MSL5052S2, 2 drive, 52 slots, SDLT 320, RM MSL5052S2, 2 drive, 52 slots, SDLT 320, RM with embedded FC router

NOTE:

NOTE: NOTE:

http://www.hp.com/go/automation

complete solution; reference current compatibility information at

http:/www.hp.com/go/ebs

HP StorageWorks ESL E-Series Tape Libraries

HP StorageWorks ESL E-Series Tape LibrariesHP StorageWorks ESL E-Series Tape Libraries ESL Extended 712e Tape Library, 0 drive, 712 LTO slots ESL Extended 630e Tape Library, 0 drive, 630 SDLT slots ESL Extended 322e Tape Library, 0 drive, 322 LTO slots ESL Extended 286e Tape Library, 0 drive, 286 SDLT slots ESL E-Series Ultrium 960 drive kit ESL E-Series Ultrium 460 drive kit ESL E-Series Ultrium 460-FC drive kit ESL E-Series SDLT 320 drive kit ESL E-Series e2400-FC 2G Interface Controller

NOTE:

Please reference the ESL E-Series Tape Libraries QuickSpecs at

NOTE:NOTE:

http://www.hp.com/go/automation

complete solution; reference current compatibility information at

http://www.hp.com/go/ebs

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Please reference the MSL6000 Tape Library QuickSpecs at

for additional information needed to create a

Please reference the MSL5052S2 Tape Library QuickSpecs at

for additional information needed to create a

.

AD600A AD601A AD604A

293472-B22

293472-B23

293472-B24

293472-B25

293474-B21

293474-B24

AA934B AA935B AA939B AA940B

AD595A

AA937A AA941A AA936A AA928A

DA - 12160 North America — Version 7 — June 27, 2005

Page 30

QuickSpecs

Options

Ultra Density Optical

Ultra Density OpticalUltra Density Optical Jukeboxes

Jukeboxes

JukeboxesJukeboxes

Magneto-Optical

Magneto-OpticalMagneto-Optical Jukeboxes

Jukeboxes

JukeboxesJukeboxes

1000ux, 2 drive, 32 slot jukebox 1900ux, 4 drive, 64 slot jukebox 1900ux, 4 mixed drive, 64 slot jukebox 2300ux, 2 drive, 76 slot jukebox 3800ux, 4 drive, 128 slot jukebox 3800ux, 6 drive, 128 slot jukebox 7100ux, 4 drive, 238 slot jukebox 7100ux, 6 drive, 238 slot jukebox 7100ux, 10 drive, 238 slot jukebox 7100ux, 6 mixed drive, 238 slot jukebox

NOTE:

NOTE: NOTE:

http://www.hp.com/go/optical

complete solution.

HP StorageWorks 9.1 GB Mid-range Optical Jukeboxes

HP StorageWorks 9.1 GB Mid-range Optical JukeboxesHP StorageWorks 9.1 GB Mid-range Optical Jukeboxes 300mx, 2 drive, 32 slot jukebox 600mx, 4 drive, 64 slot jukebox

700mx, 2 drive, 76 slot jukebox

NOTE:

Please reference the Magneto-Optical Jukebox data sheets at

NOTE:NOTE:

http://www.hp.com/go/optical

complete solution

HP StorageWorks 9.1 GB High-end Optical Jukeboxes

HP StorageWorks 9.1 GB High-end Optical JukeboxesHP StorageWorks 9.1 GB High-end Optical Jukeboxes 1200mx, 4 drive, up to 128 slots 1200mx, 6 drive, up to 128 slots 2200mx, 4 drive, up to 238 slots 2200mx, 6 drive, up to 238 slots 2200mx, 10 drive, up to 238 slots

NOTE:

Please reference the Magneto-Optical Jukebox data sheets at

NOTE:NOTE:

http://www.hp.com/go/optical

complete solution.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Please reference the Ultra Density Optical Jukebox QuickSpecs at

for additional information needed to create a

AA965A AA966A AA968A AA967A AA969A AA970A AA973A AA971A AA972A AA974A

C1150M C1160M

C1170M

C1104M C1105M C1111M C1107M C1110M

DA - 12160 North America — Version 7 — June 27, 2005

Page 31

QuickSpecs

Options

HP StorageWorks

HP StorageWorksHP StorageWorks Modular Smart Array

Modular Smart Array

Modular Smart ArrayModular Smart Array 1000

1000

10001000

HP StorageWorks

HP StorageWorksHP StorageWorks Modular Smart Array

Modular Smart Array

Modular Smart ArrayModular Smart Array 1500

1500

15001500

Cluster Options

Cluster OptionsCluster Options

HP StorageWorks Modular Smart Array 1000 Modular Smart Array 1000 Controller Modular Smart Array Fibre Channel I/O Module Modular Smart Array hub 2/3 HP StorageWorks Modular Smart Array 1000

NOTE:

Please see the StorageWorks Modular Smart Array 1000 QuickSpecs for

NOTE:NOTE: additional options and configuration information at:

http://h18000.www1.hp.com/products/quickspecs/11033_na/11033_na.HTML

HP StorageWorks Modular Smart Array 1500

NOTE:

NOTE: NOTE: additional options and configuration information at:

http://h18000.www1.hp.com/products/quickspecs/11945_na/11945_na.HTML

HP Serviceguard for Linux License A.11.15 for SUSE SLES 8 / UnitedLinux 1.0 and Red Hat EL 3 (single license version)

HP Serviceguard for Linux ProLiant Cluster A.11.15 for SUSE SLES 8 / UnitedLinux 1.0 and Red Hat EL 3 (2 node license cluster kit).

NOTE:

NOTE: NOTE: please see the following QuickSpecs at:

http://h18000.www1.hp.com/products/quickspecs/11518_na/11518_na.html

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Please see the StorageWorks Modular Smart Array 1500 QuickSpecs for

For additional information regarding the HP Serviceguard for Linux License,

201723-B22

218231-B22

218960-B21

286763-B21

201723-B22

AA986A

307754-B26

305199-B26

USB Options

USB OptionsUSB Options

HP Rack 5000 Series

HP Rack 5000 SeriesHP Rack 5000 Series (Graphite Metallic)

Rack Options for Rack

Rack Options for RackRack Options for Rack 5000 Series

5000 Series

5000 Series5000 Series

USB 1.44-MB External Diskette Drive (Carbonite) USB 2-Button Optical Mouse (Carbonite) USB Optical Scroll Mouse (Carbonite) 256MB HP Drive Key II (USB 2.0)

HP 5642 Rack - Unassembled

Stabilizer Kit for 5642 Rack (Graphite Carbon)

NOTE:

NOTE: NOTE:

Baying Kit for 5642 Rack (Graphite Carbon)

NOTE:

NOTE: NOTE:

The stabilizing kit is used to prevent rack from tipping over.

The baying kit is used to join two or more HP 5642 racks.

DC141B DC172B DD441B

PH657A

358254-B21

374493-B21

374499-B21

DA - 12160 North America — Version 7 — June 27, 2005

Page 32

QuickSpecs

Options

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Rack 10000 Series

Rack 10000 SeriesRack 10000 Series (Graphite Metallic)

Rack, HP Infrastructure 42U (HV) Rack, HP Infrastructure 42U (LV) HP Rack 10842 (42U) - Pallet HP Rack 10842 (42U) - Shock Pallet HP S10614 (14U) Rack Cabinet - Shock Pallet HP Rack 10647 (47U) Cabinet - Pallet HP Rack 10647 (47U) Cabinet - Crated HP Rack 10642 (42U) Cabinet - Pallet HP Rack 10642 (42U) Cabinet - Shock Pallet HP Rack 10642 (42U) Cabinet - Crated HP Rack 10636 (36U) Cabinet - Pallet HP Rack 10636 (36U) Cabinet - Shock Pallet HP Rack 10636 (36U) Cabinet - Crate HP Rack 10622 (22U) Cabinet - Pallet HP Rack 10622 (22U) Cabinet - Shock Pallet HP Rack 10622 (22U) Cabinet - Crated

NOTE:

-B21 (pallet) used to ship empty racks shipped on a truck

NOTE:NOTE:

-B22 (shock pallet) used to ship racks with equipment installed (by custom systems, VARs and Channels)

-B23 (crated) used for air shipments of empty racks Not all HP equipment is qualified to be shipped in the Rack 10000 series.

NOTE:

Please see the Rack 10000 QuickSpecs for Technical Specifications such as

NOTE:NOTE: height, width, depth, weight, and color:

http://h18000.www1.hp.com/products/quickspecs/10995_na/10995_na.HTML

NOTE:

For additional information regarding Rack Cabinets, please see the following

NOTE:NOTE: URL:

http://h18000.www1.hp.com/products/servers/proliantstorage/rack-

options/index.html

379005-001

379006-001

257415-B21

257415-B22

292302-B22

245160-B21

245160-B23

245161-B21

245161-B22

245161-B23

245162-B21

245162-B22

245162-B23

245163-B21

245163-B22

245163-B23

Rack Options for HP

Rack Options for HPRack Options for HP Rack 10000 Series

Rack 10000 Series

Rack 10000 SeriesRack 10000 Series

HP Light kit for 10000 series rack HP Plinth kit for 10000 series rack 42U Side Panel – Graphite Metallic 36U Side Panel – Graphite Metallic 47U Side Panel – Graphite Metallic

NOTE:

NOTE: For additional information regarding Rack Options, please see the following

NOTE:NOTE: URL:

http://h18000.www1.hp.com/products/servers/proliantstorage/rack-

options/index.html

TFT5600 Rack Keyboard Monitor TFT7210R Rack Mounted 17" Monitor

NOTE:

For a complete list of Monitors please view the following URL:

NOTE:NOTE:

http://h18004.www1.hp.com/products/monitors/

1U Rack Keyboard & Drawer (Carbon)

NOTE:

NOTE: NOTE: URL:

options/index.html

For additional information regarding Rack Options, please see the following

http://h18000.www1.hp.com/products/servers/proliantstorage/rack-

DA - 12160 North America — Version 7 — June 27, 2005

.

361589-B21

251960-B21

246099-B21

246102-B21

255486-B21

221546-001

348373-B21

257054-001

Page 33

QuickSpecs

Options

HP KVM Switch Options

HP KVM Switch OptionsHP KVM Switch Options

Rack Options for Telco

Rack Options for TelcoRack Options for Telco Racks

Racks

RacksRacks

IP Console Switch Box (KVM/IP), 1 x 1 x 16 IP Console Switch Box (KVM/IP) , 3 x 1 x 16 Serial Interface adapter - 1 Pack with power supply Interface adapter - USB 1.0 (single pack) CAT5e Cable 3', 4 pack CAT5e Cable 6', 8 pack CAT5e Cable 12', 8 pack CAT5e Cable 20', 4 pack CAT5e Cable 40', 1 pack

NOTE:

NOTE: NOTE: see the following URL:

http://h18004.www1.hp.com/products/servers/proliantstorage/rackoptions/list.html/#console

ProLiant BL p-Class Bus Bar Telco Rack Kit ProLiant BL p-Class Enclosure Telco Rack Kit

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

For additional information regarding HP KVM Switches and options, please

262585-B21

262586-B21

373035-B21

336047-B21

263474-B21

263474-B22

263474-B23

263474-B24

263474-B25

245249-B21

266076-B21

Service and Support

Service and SupportService and Support Offerings

Offerings

Offerings Offerings Services)

(HP Care Pack

NOTE:

NOTE: The HP Care Pack services for ProLiant BL p-Class server blades, cover the

NOTE:NOTE: server blade and the p-Class blade enclosure that the server blade is installed in as well as interconnects, power enclosure with power supplies and power distribution.

Hardware Services On-site Service

Hardware Services On-site ServiceHardware Services On-site Service Next Business Day On-site Service, 5-Day x 9-Hour Coverage,

3 Years Next Business Day On-site Service, 5-Day x 9-Hour Coverage,

3 Years, Electronic 4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years

4-Hour On-site Service, 5-Day x 13-Hour Coverage, 3 Years, Electronic

4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years 4-Hour On-site Service, 7-Day x 24-Hour Coverage, 3 Years, Electronic 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years 6-Hour Call to Repair, On-site Service, 7-Day x 24-Hour Coverage, 3 Years,

Electronic

UA203A

UA203E

UA204A

UA204E

UA205A

UA205E

UA206A

UA206E

DA - 12160 North America — Version 7 — June 27, 2005

Page 34

QuickSpecs

Options

Installation & Start-up Services

Installation & Start-up ServicesInstallation & Start-up Services ProLiant BL p-Class Blade Server Hardware Installation

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

UA219A

ProLiant BL p-Class Blade Server Hardware Installation, Electronic ProLiant BL p-Class Enclosure and Server Blade Hardware Installation ProLiant BL p-Class Enclosure and Server Blade Hardware Installation, Electronic Provides for the Installation and Start-up of ProLiant Essentials Rapid Deployment Pack

on a Customer supplied server designated as a Deployment Server. Includes the deployment of a single server. This new server will be deployed using either one of the pre-configured scripts or an image. In addition, the service will provide for the capture and storage of the configuration of the newly deployed server and orientation on product usage. To be delivered during standard office ours, standard office days.

Provides for the Installation and Start-up of ProLiant Essentials Rapid Deployment Pack on a Customer supplied server designated as a Deployment Server. Includes the deployment of a single server. This new server will be deployed using either one of the pre-configured scripts or an image. In addition, the service will provide for the capture and storage of the configuration of the newly deployed server and orientation on product usage. To be delivered during standard office ours, standard office days. Electronic.

Provides for the Installation and Start-up of Rapid Deployment Pack Implementation of Rapid Deployment Pack (Basic)

Provides for the Installation and Start-up of Rapid Deployment Pack Implementation of Rapid Deployment Pack (Basic) (Electronic)

Provides for the Installation and Start-up of System Insight Manager Provides for the Installation and Start-up of System Insight Manager (Electronic) Provides for the Installation and Start-up of System Insight Manager Agents Provides for the Installation and Start-up of System Insight Manager (Electronic)

NOTE:

For more information, customer/resellers can contact

NOTE:NOTE:

http://www.hp.com/hps/carepack/services/

Software Operating Environment Care Packs

Software Operating Environment Care PacksSoftware Operating Environment Care Packs Microsoft Software Operating Environment Software Telephone 9x5 - 3 incident Microsoft Software Operating Environment Software Telephone 9x5 - 3 incident

(Electronic) Red Hat Software Operating Environment Software Telephone 9x5 - 10 incident Red Hat Software Operating Environment Software Telephone 9x5 - 10 incident

(Electronic) SUSE Software Operating Environment Software Telephone 9x5 - 3 incident SUSE Software Operating Environment Software Telephone 9x5 - 3 incident

(Electronic) ProLiant Essentials Operating Environment, - 5 Day, 8x5,1 year, 3 incident ProLiant Essentials Operating Environment, - 5 Day, 8x5,1 year, 3 incident (Electronic)

UA219E

U4971A

U4971E

U5683A

U5683E

UA042A

UA042E

UA041A

UA041E

UA040A

UA040E

U8169A

U8169E

U3402A

U3402E

U9615A

U9615E

U8222A

U8222E

DA - 12160 North America — Version 7 — June 27, 2005

Page 35

QuickSpecs

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Memory

HP ProLiant BL25p Server Blade (2P Models)

HP ProLiant BL25p Server Blade (2P Models)HP ProLiant BL25p Server Blade (2P Models) Standard Memory

Standard Memory

Standard MemoryStandard Memory 2048-MB PC3200 Registered DDR SDRAM DIMM installed (4 x 512MB SDRAM DIMM)

Standard Memory Plus Optional Memory

Standard Memory Plus Optional MemoryStandard Memory Plus Optional Memory Up to 10240-MB of DDR SDRAM DIMM memory is available with the installation of optional DDR SDRAM DIMM memory expansion kits.

Standard Memory Replaced with Optional Memory

Standard Memory Replaced with Optional MemoryStandard Memory Replaced with Optional Memory Up to 16384-MB of DDR SDRAM DIMM memory is available with the removal of standard memory and the installation of optional SDRAM DDR DIMM memory expansion kits.

Memory

MemoryMemory

1111 2222 3333 4444 5555 6666 7777 8888

Standard

StandardStandard Optional

Optional

OptionalOptional Maximum

Maximum

MaximumMaximum

2048 MB

2048 MB2048 MB 10240 MB

10240 MB

10240 MB10240 MB 16384 MB

16384 MB

16384 MB16384 MB

512 MB 512 MB 2048 MB 2048 MB 2048 MB 2048 MB 2048 MB 2048 MB 2048 MB 2048 MB 2048 MB 2048 MB

Empty Empty 512 MB 512 MB

Following are memory options available from HP:

4096MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 2 GB) 2048MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 1 GB) 1024MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 512 MB)

Slot

SlotSlot

512 MB 512 MB 2048 MB 2048 MB

Empty Empty 512 MB 512 MB

379300-B21

376639-B21

376638-B21

HP ProLiant BL25p Server Blade (1P Model)

HP ProLiant BL25p Server Blade (1P Model)HP ProLiant BL25p Server Blade (1P Model) Standard Memory

Standard Memory

Standard MemoryStandard Memory 1024-MB PC3200 400MHz Registered DDR SDRAM DIMM installed

Standard Memory Plus Optional Memory

Standard Memory Plus Optional MemoryStandard Memory Plus Optional Memory Up to 5120-MB of DDR SDRAM DIMM memory is available with the installation of optional DDR SDRAM DIMM memory expansion kits.

Standard Memory Replaced with Optional Memory

Standard Memory Replaced with Optional MemoryStandard Memory Replaced with Optional Memory Up to 8192-MB of DDR SDRAM DIMM memory is available with the removal of standard memory and the installation of optional DDR SDRAM DIMM memory expansion kits.

Memory

MemoryMemory

Standard

StandardStandard Optional

Optional

OptionalOptional Maximum

Maximum

MaximumMaximum

1024 MB

1024 MB1024 MB 5120 MB

5120 MB

5120 MB5120 MB 8192 MB

8192 MB

8192 MB8192 MB

1111 2222 3333 4444 5555 6666 7777 8888 512 MB 512 MB 2048 MB 2048 MB 2048 MB 2048 MB 2048 MB 2048 MB

Empty Empty Empty Empty Empty Empty 512 MB 512 MB

Slot

SlotSlot

Empty Empty Empty Empty Empty Empty Empty Empty

Following are memory options available from HP:

4096MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 2 GB) 2048MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 1 GB) 1024MB of Advanced ECC PC3200 DDR SDRAM DIMM Memory Kit (2 x 512 MB)

379300-B21 376639-B21 376638-B21

DA - 12160 North America — Version 7 — June 27, 2005

Page 36

QuickSpecs

Technical Specifications

HP BladeSystem

HP BladeSystemHP BladeSystem p-Class Server Blade

p-Class Server Blade

p-Class Server Bladep-Class Server Blade Enclosure

Enclosure

EnclosureEnclosure

Dimensions

DimensionsDimensions

Input Specifications

Input SpecificationsInput Specifications

Individual Server Blade

Individual Server BladeIndividual Server Blade Bay Ratings

Bay Ratings

Bay RatingsBay Ratings

Temperature Range

Temperature RangeTemperature Range

Relative Humidity

Relative HumidityRelative Humidity (non-condensing)

(non-condensing)

(non-condensing)(non-condensing) Wet Bulb Temperature

Wet Bulb Temperature

Wet Bulb TemperatureWet Bulb Temperature

NOTE:

NOTE: NOTE: direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Height Width Depth Rated input voltage Rated input current Rated input Power Rated input voltage Rated input current Rated input Power Operating Non-Operating Operating Non-Operating Operating Non-Operating

Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No

10.5 in (26.67 cm)

17.60 in (44.70 cm)

28.86 in (73.30 cm)

-43 VDC to -53 VDC

62.5 A at -48 VDC 3000 W

-43 VDC to -53 VDC

6.25 A at -48 VDC 300 W 50° to 95° F (10° to 35° C)

-22° to 140° F (-30° to 60° C) 20% to 80% 5% to 95%

82.4° F (28° C)

101.7° F (38.7° C)

Nominal -48 VDC

HP BladeSystem

HP BladeSystemHP BladeSystem p-Class Server Blade

p-Class Server Blade

p-Class Server Bladep-Class Server Blade Enclosure with enhanced

Enclosure with enhanced

Enclosure with enhancedEnclosure with enhanced backplane components

backplane components

backplane componentsbackplane components

Dimensions

DimensionsDimensions

Input Specifications

Input SpecificationsInput Specifications

Individual Server Blade

Individual Server BladeIndividual Server Blade Bay Ratings

Bay Ratings

Bay RatingsBay Ratings

Temperature Range

Temperature RangeTemperature Range

Relative Humidity

Relative HumidityRelative Humidity (non-condensing)

(non-condensing)

(non-condensing)(non-condensing) Wet Bulb Temperature

Wet Bulb Temperature

Wet Bulb TemperatureWet Bulb Temperature

NOTE:

NOTE: NOTE: direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.

Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No

Height Width Depth Rated input voltage Rated input current Rated input Power Rated input voltage Rated input current Rated input Power Operating Non-Operating Operating Non-Operating Operating Non-Operating

10.5 in (26.67 cm)

17.60 in (44.70 cm)

28.86 in (73.30 cm)

-43 VDC to -53 VDC 125 A at -48 VDC 6000 W

-43 VDC to -53 VDC

14.6 A at -48 VDC 700 W 50° to 95° F (10° to 35° C)

-22° to 140° F (-30° to 60° C) 20% to 80% 5% to 95%

82.4° F (28° C)

101.7° F (38.7° C)

Nominal -48 VDC

DA - 12160 North America — Version 7 — June 27, 2005

Page 37

QuickSpecs

Technical Specifications

Operating and

Operating andOperating and Performance

Performance

PerformancePerformance Specifications for RJ-45

Specifications for RJ-45

Specifications for RJ-45Specifications for RJ-45 Patch Panel 2 with Fiber

Patch Panel 2 with Fiber

Patch Panel 2 with FiberPatch Panel 2 with Fiber Channel pass through

Channel pass through

Channel pass throughChannel pass through

Dimensions

DimensionsDimensions

Capability

CapabilityCapability Network Transfer Rate

Network Transfer Rate

Network Transfer RateNetwork Transfer Rate

Fiber Channel SAN

Fiber Channel SANFiber Channel SAN Connector

Connector

ConnectorConnector

Cable Support

Cable SupportCable Support

EMI

EMIEMI

NOTE:

NOTE: NOTE: direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Height Width Depth IEEE 802.2, 802.3, 802.3u 10 Base-T (half-duplex) 10 Base-T (full-duplex) 100 Base-TX (half-duplex) 100 Base-TX (full-duplex) 1000 Base-TX (full-duplex) Velio VC1070 re-timer Network Fiber Channel SAN 10 Base-TX

100 Base-TX 1000 Base-TX Fiber Channel FCC Class A ICES-003 Class A AS/NZS 3548 Class A VCCI Class A

Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No

10.405 in (26.43 cm)

1.535 in (3.899 cm)

27.697 in (70.35 cm)

10 Mbps 20 Mbps 100 Mbps 200 Mbps 1000 Mbps Auto-rate negotiate between 2G and 1G RJ-45 in the back. Pluggable SFP optical slot in the front. Categories 3, 4, or 5 UTP (2 or 4 pair);

up to 328 ft (100 m) Category 5 UTP (2 pair); up to 328 ft/100 m Category 5E (4 pair); up to 328 ft (100 m) SFP optical cable

Operating and

Operating andOperating and Performance

Performance

PerformancePerformance Specifications for RJ-45

Specifications for RJ-45

Specifications for RJ-45Specifications for RJ-45 Patch Panel

Patch Panel

Patch PanelPatch Panel

Dimensions

DimensionsDimensions

Capability

CapabilityCapability Network Transfer Rate

Network Transfer Rate

Network Transfer RateNetwork Transfer Rate

Connector

ConnectorConnector Cable Support

Cable Support

Cable SupportCable Support

Power Requirements

Power RequirementsPower Requirements Temperature Range

Temperature Range

Temperature RangeTemperature Range

DA - 12160 North America — Version 7 — June 27, 2005

Height Width Depth IEEE 802.2, 802.3, 802.3u 10 Base-T (half-duplex) 10 Base-T (full-duplex) 100 Base-TX (half-duplex) 100 Base-TX (full-duplex) 1000 Base-TX (full-duplex) Network 10 Base-TX

100 Base-TX 1000 Base-TX 200 mA at + 5V DC; 500 mA at -48V Operating Non-operating

10.405 in (26.43 cm)

1.535 in (3.899 cm)

27.697 in (70.35 cm)

10 Mbps 20 Mbps 100 Mbps 200 Mbps 1000 Mbps RJ-45 in the back Categories 3, 4, or 5 UTP (2 or 4 pair);

up to 328 ft (100 m) Category 5 UTP (2 pair); up to 328 ft (100 m) Category 5E (4 pair); up to 328 ft (100 m)

50° to 95° F (10° to 35° C)

-22° to 140° F (-30° to 60° C)

Page 38

QuickSpecs

Technical Specifications

Relative Humidity

Relative HumidityRelative Humidity (non-condensing)

(non-condensing)

(non-condensing)(non-condensing) Wet Bulb Temperature

Wet Bulb Temperature

Wet Bulb TemperatureWet Bulb Temperature

Operating and

Operating andOperating and Performance

Performance

PerformancePerformance Specifications for ProLiant

Specifications for ProLiant

Specifications for ProLiantSpecifications for ProLiant BL p-Class GbE

BL p-Class GbE

BL p-Class GbEBL p-Class GbE Interconnect Switch

Interconnect Switch

Interconnect SwitchInterconnect Switch

NOTE:

NOTE: NOTE: direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.

Dimensions

DimensionsDimensions

Weight

WeightWeight Performance

Performance

PerformancePerformance

Forwarding Mode

Forwarding ModeForwarding Mode MAC Addresses

MAC Addresses

MAC AddressesMAC Addresses

Forwarding Table

Forwarding TableForwarding Table Age Time

Age Time

Age TimeAge Time Memory

Memory

MemoryMemory Compliance

Compliance

ComplianceCompliance

Network Transfer Rate

Network Transfer RateNetwork Transfer Rate

Connector

ConnectorConnector

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Operating Non-operating Operating Non-operating

Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No

Height Width Depth

11.5 lb/5.2 kg per interconnect switch

9.6 Gbps external port bandwidth per server blade enclosure (full duplex) Forwarding rate 0.15 million pps per 10/100 port, 1.5 million pps per

gigabit port, (64-byte packets) Non-blocking, full-wire speed for all connections Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex support Store and forward 8,191 per interconnect switch; MAC address based filtering and MAC

address packet priority configuring Maximum age: 1 to 1,000,000 seconds; default: 300 seconds

32MB Main, 6MB flash and 16MB packet buffer per interconnect switch IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3z (F-GbE only), 802.1D,

802.1p, 802.3ac, 802.3ad (Static), and 802.1Q SNMP v1 (RFC 1157) and RMON v1 (RFC 1757) groups 1, 2, 3, and 9 MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface Group MIB (RFC

2863), Ethernet MIB (RFC 1643), 802.1Q Extended Bridge MIB (RFC

2674), Entity MIB (RFC 2037), SNMP Trap Convention (RFC 1215), Bridge Trap (RFC 1493), Remote Monitoring Traps (RFC 1757), and HP Enterprise Switch MIBs and Environmental Traps

IGMP v1 (RFC 1112), IGMP v2 (RFC 2236), SNTP (RFC 1361), Telnet (RFC

854), TFTP client (RFC 783), BootP client, (RFC 2132), DHCP client, (RFC

2131) and ZModem, 10 Base-T (half-duplex) 10 Base-T (full-duplex) 100 Base-TX (half-duplex) 100 Base-TX (full-duplex) 1000 Base-TX (half and

full-duplex) 1000 Base-SX (full-duplex) 12 RJ-45, 2 DB-9 (C-GbE Interconnect Kit)

4 LC fiber, 8 RJ-45, 2 DB-9 (F-GbE Interconnect Kit)

20% to 80% 5% to 95%

82.4° F (28° C)

101.7° F (38.7° C)

10.405 in (26.43 cm)

1.535 in (3.899 cm)

27.697 in (70.35 cm)

10 Mbps 20 Mbps 100 Mbps 200 Mbps 2000 Mbps

2000 Mbps

DA - 12160 North America — Version 7 — June 27, 2005

Page 39

QuickSpecs

Technical Specifications

Cable Support

Cable SupportCable Support

Safety

SafetySafety

Power Requirements

Power RequirementsPower Requirements Temperature Range

Temperature Range

Temperature RangeTemperature Range

Relative Humidity

Relative HumidityRelative Humidity (non-condensing)

(non-condensing)

(non-condensing)(non-condensing) Wet Bulb Temperature

Wet Bulb Temperature

Wet Bulb TemperatureWet Bulb Temperature

NOTE:

NOTE: NOTE: direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

FCC Class A ICES-003 Class A AS/NZS 3548 Class A VCCI Class A UL/CUL Listed Accessory CE

-48VDC: 1050 mA, 50 W maximum (per interconnect switch) Operating Non-operating Operating Non-operating Operating Non-operating

Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No

50° to 95° F (10° to 35° C)

-22° to 140° F (-30° to 60° C) 20% to 80% 5% to 95%

82.4° F (28° C)

101.7° F (38.7° C)

Operating and

Operating andOperating and Performance

Performance

PerformancePerformance Specifications for GbE2

Specifications for GbE2

Specifications for GbE2Specifications for GbE2 Interconnect Switch

Interconnect Switch

Interconnect SwitchInterconnect Switch

Dimensions

DimensionsDimensions

Weight

WeightWeight Performance

Performance

PerformancePerformance

Forwarding Mode

Forwarding ModeForwarding Mode MAC Addresses

MAC Addresses

MAC AddressesMAC Addresses Forwarding Table

Forwarding Table

Forwarding TableForwarding Table Age Time

Age Time

Age TimeAge Time Memory

Memory

MemoryMemory Compliance

Compliance

ComplianceCompliance

Height Width Depth

12.0 lb/5.4 kg per interconnect switch 24 Gbps External port bandwidth per server blade enclosure (full duplex) Forwarding rate 1.5 million pps per gigabit port (64-byte packets) Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex support Store and forward 2,048 per interconnect switch Maximum age: 1 to 65535 seconds; default: 300 seconds

128MB Main, 32MB flash and 2MB packet buffer per interconnect switch IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.3z (F-GbE2 only), 802.1D,

802.3ac, 802.3ad (Static), and 802.1Q SNMP v1 (RFC 1157), MIB-II (RFC 1213), Bridge MIB (RFC 1493), Interface

Group MIB (RFC 2863), Ethernet MIB (RFC 1643), 802.1Q Extended Bridge MIB , Entity MIB (RFC 2037), RADIUS Authentication MIB, 802.3-2002 MIB, SNMP Trap Convention (RFC 1215), Bridge Trap (RFC 1493), Remote Monitoring Traps (RFC 1757) and HP Enterprise Switch MIBs and Environmental Traps

RADIUS (RFC 2138), Telnet (RFC 854), TFTP client (RFC 783), SSH v1.5, SCP v1.5, NTP v2 (RFC 1119), BootP client (RFC 2132), and XModem

10.405 in (26.43 cm)

1.535 in (3.899 cm)

27.697 in (70.35 cm)

DA - 12160 North America — Version 7 — June 27, 2005

Page 40

QuickSpecs

Technical Specifications

Network Transfer

Network TransferNetwork Transfer Rate

Rate

RateRate

Connector

ConnectorConnector

EMI

EMIEMI

Safety

SafetySafety

Power

PowerPower Requirements

Requirements

RequirementsRequirements

Temperature

TemperatureTemperature Range

Range

RangeRange Relative Humidity

Relative Humidity

Relative HumidityRelative Humidity (non-condensing)

(non-condensing)

(non-condensing)(non-condensing) Wet Bulb

Wet Bulb

Wet BulbWet Bulb Temperature

Temperature

TemperatureTemperature

NOTE:

NOTE: NOTE: sunlight. Upper operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/9,144 m or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F/45° C. Altitude maximum for storage is 70 KPa.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

10 Base-T (half-duplex) 10 Base-T (full-duplex) 100 Base-TX (half-duplex) 100 Base-TX (full-duplex) 1000 Base-TX (half and

full-duplex) 1000 Base-SX (full-duplex) 12 RJ-45, 2 DB-9 (C-GbE2 Interconnect Kit)

8 LC fiber, 4 RJ-45, 2 DB-9 (F-GbE2 Interconnect Kit) FCC Class A ICES-003 Class A AS/NZS 3548 Class A VCCI Class A UL/CUL Listed Accessory CE 48VDC: 2040 mA, 98 W maximum (per interconnect switch without Storage

Connectivity Kit) 48VDC: 2355 mA, 113 W maximum (per interconnect switch with Storage Connectivity Kit)

Operating Non-operating Operating Non-operating Operating Non-operating

Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct

10 Mbps 20 Mbps 100 Mbps 200 Mbps 2000 Mbps

2000 Mbps

50° to 95° F (10° to 35° C)

-22° to 140° F (-30° to 60° C) 20% to 80% 5% to 95%

82.4° F (28° C)

101.7° F (38.7° C)

Operating and

Operating andOperating and Performance

Performance

PerformancePerformance Specifications for CGESM

Specifications for CGESM

Specifications for CGESMSpecifications for CGESM Interconnect Switch

Interconnect Switch

Interconnect SwitchInterconnect Switch

Dimensions

DimensionsDimensions

Weight

WeightWeight Performance

Performance

PerformancePerformance

Forwarding Mode

Forwarding ModeForwarding Mode MAC Addresses

MAC Addresses

MAC AddressesMAC Addresses Memory

Memory

MemoryMemory

DA - 12160 North America — Version 7 — June 27, 2005

Height Width Depth

11.5 lb/5.2 kg per interconnect switch 28 Gbps Maximum Forwarding Bandwidth. 38.7mpps Maximum

Forwarding Rate (64 Byte Packets) 9018Bytes Jumbo Frames MTU Non-blocking architecture. Wire Speed Performance on all ports Auto-MDI/MDIX, auto-negotiation and auto-sensing with full-duplex support Store and forward 8000 MAC/physical address Table Size 128MB DRAM Memory. 16MB Flash Memory

10.405 in (26.43 cm)

1.6 in (4.06 cm) 28 in (71.12 cm)

Page 41

QuickSpecs

Technical Specifications

Compliance

ComplianceCompliance

Network Transfer

Network TransferNetwork Transfer Rate

Rate

RateRate

Connector

ConnectorConnector EMI

EMI

EMIEMI

Safety

SafetySafety

Power

PowerPower Requirements

Requirements

RequirementsRequirements Temperature

Temperature

TemperatureTemperature Range

Range

RangeRange

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ad, IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and, IEEE 802.1D Spanning-Tree Protocol, IEEE 802.1p CoS Prioritization, IEEE 802.1Q VLAN, IEEE 802.3 10BASE-T specification, IEEE 802.3u 100BASE-TX specification, IEEE

802.3ab 1000BASE-T specification, IEEE 802.3z 1000BASE-X specification RMON I and II standards, SNMPv1, SNMPv2c, and SNMPv3 (RFC1493) , CISCO-CDP-MIB, CISCO-CLUSTER-MIB, CISCO-CONFIG-

MAN-MIB, CISCO-ENTITY-FRU-CONTROL-MIB, CISCO-ENVMON-MIB, CISCO-FLASH-MIB, CISCO-FTP-CLIENT-MIB, CISCO-IGMP-FILTER-MIB, CISCO-IMAGE-MIB, CISCO IP-STAT-MIB, CISCO-MAC-NOTIFICATIONMIB, CISCO-MEMORY-POOL-MIB, CISCO-PAGP-MIB, CISCO-PING-MIB, CISCO-PROCESS-MIB, CISCO-RTTMON-MIB, CISCO-STP-EXTENSIONSMIB, CISCO-SYSLOG-MIB, CISCO-TCP-MIB, CISCO-VLAN-IFTABLERELATIONSHIP-MIB, CISCO-VLAN-MEMBERSHIP-MIB, CISCO-VTP-MIB, ENTITY-MIB, ETHERLIKE-MIB, IF-MIB (in and out counters for VLANs are not supported), IGMP-MIB, OLD-CISCO-CHASSIS-MIB, OLD-CISCO-FLASHMIB, OLD-CISCO-INTERFACES-MIB, OLD-CISCO-IP-MIB, OLD-CISCOSYS-MIB, OLD-CISCO-TCP-MIB, OLD-CISCO-TS-MIB, RFC1213-MIB (per the agent capabilities specified in the, CISCO-RFC1213-CAPABILITY.my), RFC1253-MIB, RMON-MIB, RMON2-MIB, SNMP-FRAMEWORK-MIB, SNMP-MPD-MIB, SNMP-NOTIFICATION-MIB, SNMP-TARGET-MIB, SNMPv2-MIB, TCP-MIB, UDP-MIB

1000BASE-T ports, 1000BASE-X (SFP), 1000BASE-SX 10 Base-T (half-duplex) 10 Base-T (full-duplex) 100 Base-TX (half-duplex) 100 Base-TX (full-duplex) 1000 Base-TX (half and

full-duplex) 1000 Base-SX (full-duplex) 4 SFP, 2 RJ-45 10/100/1000 T/TX/T, 1 DB-9 FCC Part 15 Class A EN 55022: 1998 (CISPR22)

EN 55024: 1998 (CISPR24) CNS 13438 Class A MIC CD MIC

AS/NZS 3548 Class A CE VCCI Class A UL to UL 60950, Third Edition

C-UL to CAN/CSA C22.2 No. 60950-00, Third Edition TUV/GS to EN 60950:2000 CB to IEC 60950 with all country deviations NOM to NOM-019-SCFI

CE Marking

-48VDC: 1050 mA, 125 W maximum (per interconnect switch)

Operating Non-operating

10 Mbps 20 Mbps 100 Mbps 200 Mbps 2000 Mbps

2000 Mbps

50° to 95° F (10° to 35° C)

-22° to 140° F (-30° to 60° C)

DA - 12160 North America — Version 7 — June 27, 2005

Page 42

QuickSpecs

Technical Specifications

Relative Humidity

Relative HumidityRelative Humidity (non-condensing)

(non-condensing)

(non-condensing)(non-condensing) Wet Bulb

Wet Bulb

Wet BulbWet Bulb Temperature

Temperature

TemperatureTemperature

NOTE:

NOTE: NOTE: sunlight. Upper operating limit is 10,000 ft/3,048 m or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft/9,144 m or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F/45° C. Altitude maximum for storage is 70 KPa.

Operating and

Operating andOperating and Performance

Performance

PerformancePerformance Specifications for

Specifications for

Specifications forSpecifications for Power Enclosures

Power Enclosures

Power EnclosuresPower Enclosures

Dimensions

DimensionsDimensions

Weights

WeightsWeights

Input Requirements

Input RequirementsInput Requirements

Output Voltage

Output VoltageOutput Voltage Specifications

Specifications

SpecificationsSpecifications

Ambient Temperature

Ambient TemperatureAmbient Temperature Range

Range (See

RangeRange

Relative humidity,

Relative humidity,Relative humidity, non-condensing

non-condensing

non-condensingnon-condensing

(See

NOTE

NOTENOTE

Wet Bulb

Wet BulbWet Bulb Temperature

Temperature

TemperatureTemperature

NOTE:

NOTE: NOTE: direct sunlight. Upper operating limit is 10,000 ft (3,048 m) or 70Kpa/10.1 psia. Upper non-operating limit is 30,000 ft (9,144 m) or 30.3 KPa/4.4 psia. Storage maximum humidity of 95% is based on a maximum temperature of 113° F (45° C). Altitude maximum for storage is 70 KPa.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Operating Non-operating Operating Non-operating

Operating temperature has an altitude derating of 34° F/1° C per 1,000 ft/304.8 m. No direct

Height Width Depth No Hot-Plug

Power Supplies All Hot-Plug

Power Supplies Rated input voltage

Rated input frequency Rated input current

per side Rated input power

per side Power cord

Rated output voltage Rated output current Rated output power Nominal power Operating

NOTE

)

NOTENOTE

Shipping

Operating

)

Operating temperature has an altitude derating of 34° F (1° C) per 1,000 ft (304.8 m). No

Non-operating

Operating Non-operating

20% to 80% 5% to 95%

82.4° F (28° C)

101.7° F (38.7° C)

Single-Phase Model

Single-Phase ModelSingle-Phase Model

5.25 in (13.34 cm) 5.25 in (13.34 cm)

27.15 in (68.96 cm) 27.15 in (68.96 cm)

17.60 in (44.7 cm) 17.60 in (44.7 cm)

47.5 lb (21.55 kg) 47.5 lb (21.55 kg)

99.5 lb (45.13 kg)

200 VAC to 240 VAC 200 VAC to 240 VAC

50 Hz to 60 Hz 50 Hz to 60 Hz 24A

5760 W 9976 W

1 NEMA L6-30P per side

-48.8 VDC to -54 VDC -48.8 VDC to -54 VDC 99A 4298 W 8310 W 4158 W at 208 VAC 7202 W at 208 VAC 50° to 95° F

(10° to 35° C)

-22° to 140° F (-30° to 60° C)

20% to 80% 20% to 80%

5% to 95% 5% to 95%

82.4° F (28° C) 82.4° F (28° C)

101.7° F (38.7° C) 101.7° F (38.7° C)

Three-Phase Model

Three-Phase ModelThree-Phase Model

125.5 lb (56.93 kg)

line to line

24A per phase

1 NEMA L15-30 per side

170A

50° to 95° F (10° to 35° C)

-22° to 140° F (-30° to 60° C)

DA - 12160 North America — Version 7 — June 27, 2005

Page 43

QuickSpecs

Technical Specifications

Operating and

Operating andOperating and Performance

Performance

PerformancePerformance Specifications for

Specifications for

Specifications forSpecifications for Power Distribution

Power Distribution

Power DistributionPower Distribution Devices

Devices

DevicesDevices

Power

PowerPower Enclosures or facility DC

Enclosures or facility DC

Enclosures or facility DCEnclosures or facility DC feeds Supported

feeds Supported

feeds Supportedfeeds Supported (3U each)

Server blade enclosures

Server blade enclosuresServer blade enclosures supported

supported

supportedsupported (6U each)

Total rack height of

Total rack height ofTotal rack height of supported enclosures

supported enclosures

supported enclosuressupported enclosures Dimensions

Dimensions

DimensionsDimensions Height Width Depth Weight

Weight

WeightWeight Rated Operating

Rated Operating

Rated OperatingRated Operating Voltage

Voltage

VoltageVoltage Max Total Power

Max Total Power

Max Total PowerMax Total Power Supported

Supported

SupportedSupported Total Max Input Current

Total Max Input Current

Total Max Input CurrentTotal Max Input Current At Minimum Voltage

At Minimum Voltage

At Minimum VoltageAt Minimum Voltage

Total Max Input Current

Total Max Input CurrentTotal Max Input Current At Nominal Voltage

At Nominal Voltage

At Nominal VoltageAt Nominal Voltage

Max Current Per Power

Max Current Per PowerMax Current Per Power Feed

Feed

FeedFeed Max Local Ambient

Max Local Ambient

Max Local AmbientMax Local Ambient Temperature

Temperature

TemperatureTemperature

NOTE:

NOTE: NOTE:

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Power Bus Box

Power Bus BoxPower Bus Box 1 1 2

1 3 5

9U

5.1 in (12.95 cm)

3.6 in (9.14 cm) each

3.25 in (8.26 cm)

3.62 lb (1.64 kg)

-43.2 VDC to -54 VDC -43.2 VDC to -54 VDC -43.2 VDC to -54 VDC

3000 W 9000 W

69.44 A at -43.2VDC

62.5 A at -48VDC

70A 70A

149° F (65° C) 149° F (65° C) 149° F (65° C)

All systems support redundant A & B feeds. Scalable bus bar supports dual A and dual B feeds.

Mini Bus Bar

Mini Bus BarMini Bus Bar

21U 36U

19.45 in (49.40 cm)

19.74 in (50.14 cm) 19.74 in (50.14 cm)

2.2 in (5.59 cm) 2.2 in (5.59 cm)

13.2 lb (5.9 kg)

208.32 A at -43.2 VDC

187.5 A at -48 VDC 312.5 A at -48 VDC

Scalable Bus Bar

Scalable Bus BarScalable Bus Bar

48.57 in (123.37 cm)

26 lb (11.79 kg)

15000 W

347.2 A at -43.2 VDC (equivalent of 175A per feed)

(equivalent of 175A per feed)

210A

Operating and

Operating andOperating and Performance

Performance

PerformancePerformance Specifications for

Specifications for

Specifications forSpecifications for Facility DC

Facility DC

Facility DCFacility DC

Voltage

VoltageVoltage

Nominal input voltage Operating voltage range Max Input voltage slew

rate Redundant feed voltages*

(A & B) Ripple/Noise Overshoot

Voltage transients

DA - 12160 North America — Version 7 — June 27, 2005

-48 VDC

-48VDC ± 10% or -43.2 VDC to -52.8 VDC

0.5V/uS

*A and B feeds must differ by no more than 5VDC during steady state operation

480 mV PARD** Must remain within regulation limits on all feeds

during startup or shutdown Must not exceed -60 VDC

Page 44

QuickSpecs

Technical Specifications

Current

CurrentCurrent

In-rush current

In-rush currentIn-rush current

Input over-current

Input over-currentInput over-current

Max Input Current Slew

Max Input Current SlewMax Input Current Slew Rate

Rate

RateRate Max Rated Power

Max Rated Power

Max Rated PowerMax Rated Power Connections and Cables

Connections and Cables

Connections and CablesConnections and Cables

NOTE:

NOTE: NOTE: feeds.

** Periodic and random noise (PARD). Maximum allowable peak-to-peak ripple and noise (as measured at the load on any output channel). The ripple and noise is measured over a 20 Hz to 100 MHz frequency band. A resistive load (non-electronic) is used for this measurement. Each output is by-passed to return by a 10uF tantalum capacitor with an ESR less than 100 milli-Ohms in parallel with a 0.47 uF ceramic capacitor, at the point of load. The load cable is 12 feet of twisted wire capable of carrying the current. The printed wiring board assembly is installed in its enclosure for this measurement, or the measurement leads are properly shielded with Earth grounds applied to the insert.

HP ProLiant BL25p Server Blade

HP ProLiant BL25p Server BladeHP ProLiant BL25p Server Blade

Max steady state input current

Max steady state current per feed/total

Power bus boxes Mini bus bars Scalable bus bars

Must support up to 2X the maximum operating current per server blade enclosure (125 A) for up to 1.0 mS

Customer provided fusing for facility DC feeds that protects the system from catastrophic over-current within 20 uS. Fuse should sustain all in-rush and operating currents.

1A/uS

3000W per server blade enclosure Compaq provided facility DC cable connection kit:

The facility DC connection kit supports the connection of up to four 48VDC, RETURN pairs and ground

The power cable assemblies consist of 1/0AWG, color-coded, flexible cable rated at 105° C, terminated with bus mating connectors at one end and unterminated at the other end. The cable length provided enables the customer to route to a fuse panel within or adjacent to the rack.

*All systems support redundant A and B feeds. Scalable bus bars support dual A and dual B

62.5A per server blade enclosure installed at 48VDC

70 A/70A 210 A/210A 210 A/350A or equivalent of 175A per feed*

The information contained herein is subject to change without notice.

Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel Corporation.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

DA - 12160 North America — Version 7 — June 27, 2005

Page 45

HP 275 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Overview

Standard Features (Server Blade)

Standard Features (Server Blade Enclosure and Interconnects)

Standard Features (Power System and Rack Information)

Standard Features

Models

Configuration Information Factory Integrated Models

Options

Memory

Technical Specifications