Product End-of-Life Disassembly Instructions
Product Category: Inkjet Printers
Marketing Name / Model
[List multiple models if applicable.]
DJ30 series / C7790D, C7790E, C7790F
DJ70 / Q6655A
DJ90 series / Q6656A, Q6656B, Q6656C
DJ100 plus / C7796C
DJ110 plus series / C7796D, C7796E
DJ130 series / C7791C, C7791D, C7791E
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
Item Description Notes
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries All types including standard alkaline
Mercury-containing components For example, mercury in lamps,
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT) 0
Capacitors / condensers (Containing PCB/PCT) 0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords Power cable and Comm & Power
Gas Discharge Lamps 0
Plastics containing Brominated Flame Retardants 0
With a surface greater than 10 sq
cm
and lithium coin or button style
batteries:
display backlights, scanner lamps,
switches, batteries
Includes background illuminated
displays with gas discharge lamps
Placed in Power Supply 2
Cables for ARSS in some models
Quantity of items
included in product
14 (C7791E)
13 (C7791D, C7796E)
10 ( C7790F)
9 ( C7790E)
8 ( C6656C)
7 ( Rest of models)
0
0
0
3 ( C7796E & C7790F)
1 (Rest of models)
Components and parts containing toner and ink, Option of 4 or 6 pens (cartridges & 12 (DJ70, DJ100 & DJ110)
EL-MF877-00 Page 1
Template Revision A
including liquids, semi-liquids (gel/paste) and toner printheads)
16 (Rest of models)
Tubes, Service Stations, ISS and
Spittoon assemblies
Components and waste containing asbestos 0
Components, parts and materials containing
0
refractory ceramic fibers
Components, parts and materials containing
0
radioactive substances
2.0 Tools Required
Tool Description Tool Size (if applicable)
Nut Driver with attachements 3/16 inch and 5.5 mm
Long Torx Screwdriver with attachments 8-9-10-15-20-15L
Small flat-blade screwdriver
3.0 Product Disassembly Process
3.1 List of the basic steps:
1. Follow the Graphic instruction 1 to segregate components containing ink (#2 & #3).
2. Follow the Graphic instruction 2 & 3 to disassembly external covers.
3. Follow the Graphic instructions 1, 4, 5, 6, 7 & 8 to segregate PCA, PCB and condensers depending on the printer
model.
4. Follow the Graphic instructions 4 & 7 to segregate parts of the showed assemblies containing ink.
3.2 Graphics.
Graphic 1
:
EL-MF877-00 Page 2
Template Revision A
Graphic 2
: (only applicable to Designjet 30 series)
Graphic 3
: (applicable to the rest of models)
EL-MF877-00 Page 3
Template Revision A