The HP StorageWorks 2000fc Modular Smart Array (MSA2000fc) represents the fibre channel model of the MSA2000 family (which
includes the MSA2000i iSCSI model and future SAS-connect versions ), a new generation of HP storage arrays specifically designed
for entry-level customers and features the very latest in functionality and technology at highly affordable price points.
The MSA2000fc is a 4Gb Fibre Channel connected 2U storage area network (SAN) or direct connect solution designed for small to
medium size deployments or remote locations. It comes in three models - a basic single controller model for low initial cost with the
ability to upgrade later; a model with dual controllers standard; and a high performance model with dual enhanced controllers for
the most demanding entry-level situations. Each model comes standard with twelve drive bays able to simultaneously accommodate
3.5-inch enterprise-class SAS drives and archival-class SATA drives. Additional capacity can easily be added when needed by
attaching up to three MSA2000 12 bay drive enclosures. Maximum raw capacity ranges from 5.4TB SAS or 12TB SATA in the base
cabinet, to over 21.6TB SAS or 48TB SATA with the addition of the maximum number of drive enclosures. Larger capacity drives are
continually in qualification, providing for even greater capacity. It has been fully tested up to 64 hosts.
additional hidden charges, licenses or fees as you add enclosures or hosts and users.
The MSA2000 offers many distinct features such as the ability to mix SAS and SATA RAID sets (VDisk) within the same enclosure
greatly increases the flexibility and economy of assigning mission-critical data and archival data to the proper drive type. The wide
variety of RAID levels supported assures the user of just the right level of performance and protection demanded by their application.
The capability of implementing controller-based snapshots and clones affordably brings enterprise-class functionality into smaller
departments, remote locations, and small but growing companies.
NOTE:
NOTE:
NOTE:NOTE:
There are no
The MSA2000fc is a member of HP StorageWorks Modular Smart Array offerings, delivering simple and affordable storage
technology to meet today's demanding and growing IT needs. These storage solutions offer excellent price/performance and
availability features for direct attach environments, small clusters, workgroups and entry-level SAN environments. Each solution is
designed to be easy to deploy, secure, with low management costs, while driving rapid return on investment.
What's New
What's New
What's NewWhat's New
HP MSA2 450GB 3G 15K 3.5 inch SAS HDD
MSA2000fc
MSA2000fc
MSA2000fcMSA2000fc
DA - 12991 EMEA — Version 5 — September 15, 2008
Page 1
QuickSpecs
Overview
Models
Models
ModelsModels
HP StorageWorks
HP StorageWorks
HP StorageWorksHP StorageWorks
MSA2000fc Modular
MSA2000fc Modular
MSA2000fc ModularMSA2000fc Modular
Smart Array
Smart Array
Smart ArraySmart Array
HP StorageWorks 2012fc Single Controller Modular Smart Array
HP StorageWorks 2012fc Dual Controller Modular Smart Array
HP StorageWorks 2212fc Dual Enhanced Controller Modular Smart Array
HP StorageWorks 2000fc Modular Smart Array Controller (for the 2012fc)
HP StorageWorks MSA2000 Single I/O 3.5 in 12 Drive Enclosure (w/ two .6m SAS
cables)
HP StorageWorks MSA2000 Dual I/O 3.5 inch 12 Drive Enclosure (w/ two .6m SAS
cables)
HP StorageWorks MSA2000 Drive Enclosure I/O Module
Highly efficient consolidation and sharing of storage geared to departmental and small to medium business requirements
Flexibility in drives (MSA2000 family-specific) Cost efficient plus high-availability choices
Enterprise-class SAS or archival-class SATA drives as the need and budget dictate
Dual-ported SAS drives for enterprise needs
Large capacity SATA drives for inexpensive archival storage
Able to mix SAS and SATA drives within the same drive enclosure
Choose either single or dual controller array models
Choice of low cost single I/O or high-availability dual I/O drive enclosure models
Customer Benefits
Customer Benefits
Customer BenefitsCustomer Benefits
The HP StorageWorks 2000 Modular Smart Array family manages growing storage requirements across multiple HP ProLiant
servers for customers who need a centralized dedicated storage solution for applications. SANs allow for controlled, costeffective growth and increased protection of data.
Its ease of management allows a department or small company to effectively handle growing storage requirements with a
minimum of complexity.
The MSA2000fc extends the benefits of shared storage resources (e.g. SAN) to first time implementers on a limited budget
The modular design allows the user to start relatively small but supports future growth to hundreds of users and up to 21.6TB
of SAS or 48TB of SATA storage
The optional controller-based snapshot and clone capability of the MSA2000 family allows the smaller departmental user or
company to implement functionality once only available to much larger firms with expensive arrays.
HP MSA2000fc Models At a Glance:
HP MSA2000fc Models At a Glance:
HP MSA2000fc Models At a Glance:HP MSA2000fc Models At a Glance:
High performance Modular Smart Array controller(s), each with two 4Gb Fibre Channel ports
Single and dual controller models
Dual Enhanced Controller model with more powerful processor (700MHz Pentium II vs. Celeron 566 MHz), ideal for video
streaming and large file writes, especially true for small block sizes
Standard model performance is measured at greater than 90K IOPs from cache and 865MB/s sustained throughput from
disk. The Dual Enhanced controller model measures at greater than 120,000 IOPs from cache and 1,150 MB/s throughput
from disk.
1 GB transportable cache per controller - battery-free cache backup with super capacitors and compact flash
256 LUNs with 16TB LUNs supported
2U rack mount chassis combining both the controller and disk shelf
Twelve 3.5 inch dual-ported SAS or SATA drive bays (supports mixing of drive types in a single shelf)
Supports expansion to 3 additional enclosures for a total of 48 disks
Redundant power supplies and fans are standard
RAID levels 0, 1, 3, 5, 6, 10, 50
Non-disruptive on-line controller code upgrade (requires dual controllers w/ multi-pathing software)
Heterogeneous support for 32-bit and 64-bit Windows, Red Hat and SuSE
Qualified and certified for Windows and Linux clustering
Optional controller-based snapshot and clone functionality
CapacityCapacity
Minimum / with maximum
additional drive
enclosures
Controller Cache
Controller Cache
Controller CacheController Cache
Host connect
Host connect
Host connectHost connect
MSA2000 has 1 or 2
controllers, EVA has 2
controllers standard
Maximum Drives
Maximum Drives
Maximum DrivesMaximum Drives
Maximum host supported
Maximum host supported
Maximum host supportedMaximum host supported
Snapshot, remote
Snapshot, remote
Snapshot, remoteSnapshot, remote
replication
replication
replicationreplication
Use for Storage
Use for Storage
Use for StorageUse for Storage
NOTE:
NOTE:
NOTE:NOTE:
LUNs and LUN size.
Product Technology
Product Technology
Product TechnologyProduct Technology
(raw)
maximum available storage capacity depends on the RAID level being implemented, and is based on maximum number of
MSA2000fc
MSA2000fc
MSA2000fcMSA2000fc
5.4TB SAS or 12TB SATA
w/ 3 drive enclosures:
21.6TB SAS or 48TB
SATA
1 GB per controller1 GB per controller1 GB per controller2 GB per controller
Two 4Gb
Fibre Channel ports
per controller
48484896
6416
Snapshot, cloneSnapshot, cloneSnapshot, clone
Primary Storage with SAS
Secondary with SATA
4Gb Fibre Channel
4Gb Fibre Channel
4Gb Fibre Channel4Gb Fibre Channel
technology
technology
technologytechnology
Modular Chassis
Modular Chassis
Modular ChassisModular Chassis
Drives available
Drives available
Drives availableDrives available
Scalability
Scalability
ScalabilityScalability
LUNs
LUNs
LUNsLUNs
RAID 0, 1, 3, 5, 6, 10,
RAID 0, 1, 3, 5, 6, 10,
RAID 0, 1, 3, 5, 6, 10,RAID 0, 1, 3, 5, 6, 10,
50.
50.
50.50.
MSA2000i
MSA2000i
MSA2000iMSA2000i
5.4TB SAS or 12TB SATA
w/ 3 drive enclosures:
21.6TB SAS or 48TB
SATA
Two 1GbE
iSCSI ports
per controller
Primary Storage with SAS
Secondary with SATA
Two host ports per controller, shipped with SFPs. the MSA2000 controller
can run in either point-to-point or FCAL (loop). The default is FCAL which is
used in Direct Connect, particularly with two controllers. The PtP (fabric)
mode is used with almost all switches.
2U, 12 Large Form Factor drive bays, accommodating SAS and SATA.
Comes standard with one or two controllers.
Serial Attached SCSI (SAS) enterprise-class drives designed for high volume,
24x7 usage. Serial-ATA (SATA) are usually reserved for archival of data as
they are both relatively inexpensive and are available in very large capacities.
The MSA2000 family of arrays can accommodate both SAS and SATA drives
within the same enclosure making it ideal to have both business-critical, high
activity files on SAS drives while using snapshot or clone capability to keep
back-up data on the less expensive drives.
SAS drive performance can be approximately 30%greater than SATA
performance on sequential host IO. SAS performance excels in sequential
lower latency response time and random IO per second transaction
performance due to higher rpm disk speeds yielding lower seek times. SAS
random performance is greater than 2x SATA.
NOTE:
NOTE:
NOTE: NOTE:
MSA2000 family.
Up to 5.4TB SAS or 12TB SATA, expandable to 21.6TB SAS or 48TB SATA
with the addition of a maximum of three MSA2000 3.5 inch Drive
Enclosures.
The MSA2000 family of arrays supports 256 LUNs and LUN sizes up to
16TB. The arrays support LUN expansion and deletion of any LUN.
In addition to the usual RAID levels, the MSA2000 family features several
important additional levels. RAID 6 is the highest level of RAID protection. It
allocates two sets of parity data across drives and allows simultaneous write
MSA2 3.5" Large Form Factor (LFF) drives are for use only in the
MSA2000sa
MSA2000sa
MSA2000saMSA2000sa
5.4TB SAS or 12TB SATA
w/ 3 drive enclosures
21.6TB SAS or 48 TB
SATA
Two 3Gb
SAS ports
per controller
4
Primary Storage with SAS
Secondary with SATA
EVA4400
EVA4400
EVA4400EVA4400
5.4TB FC or 12TB FATA
w/ 8 drive enclosures
43TB FC or 96 TB FATA
Two 4Gb
Fibre Channel ports
per controller
Snapshot, clone,
remote data replication
Primary Storage with FC
Secondary with FATA
512
DA - 12991 EMEA — Version 5 — September 15, 2008
Page 4
QuickSpecs
Family Information
Performance
Performance
PerformancePerformance
Configuration and
Configuration and
Configuration andConfiguration and
Management Tools
Management Tools
Management ToolsManagement Tools
Hot Plug Expansion and
Hot Plug Expansion and
Hot Plug Expansion andHot Plug Expansion and
Replacement Support
operations. It can withstand two simultaneous drive failures without downtime
or data loss. RAID 10 is mirroring and striping without parity. It is the most
popular of the
performance in most cases and superior fault tolerance. RAID 50 combines
the block striping and parity of RAID 5 with the straight block striping of RAID
0, yielding higher performance than RAID 5 through the addition of RAID 0,
particularly during writes.
Performance numbers are a guideline as established by tests in a lab
environment. Forty-eight 300GB 15K SAS drives were used in
dual controller configurations of four vDisks with 12 physical drives per
vDisk. Each vDisk presented a
single volume of maximum capacity according to RAID level.
Number and type of applications, number of hosts will affect overall
performance.
MSA2000 RAID 10 Performance Results (rounded)
Random Reads IOPs
Random Writes IOPs
Random Mix IOPs 60/40 read/write
Sequential Reads MB
Sequential Writes MBs
MSA2000 RAID 5 Performance Results (rounded)
Random Reads IOPs
Random Writes IOPs
Sequential Reads MBs
Sequential Writes MBs
Random Mix IOPs 60/40 read/write
HP StorageWorks MSA Storage Management Utility (SMU). Management
access, out-of-band: WEB GUI, CLI. Interface Types: Mini DB9 RS232,
10/100 Ethernet Protocols Supported SNMP, SSL, SSH, SMTP, HTTP, Telnet
The MSA2000fc supports hot plug expansion and replacement of redundant
controllers, enclosures, fans, power supplies, and I/O modules for simple,
fast installation and maintenance.
Optional controller based functionality. Offers higher levels of data
protection, enabling an almost instant recovery from data failure or
corruption. Offers alternative development testing of 'offline' production data
and the ability to backup snapped/cloned data.
multiple
Workload
Workload
WorkloadWorkload
RAID levels, allowing large arrays with high
MSA2012fc
MSA2012fcMSA2212fc
MSA2012fcMSA2012fc
10,60011,200
5,0007,800
6,7008,900
650
330470
10,20010,700
1,7002,400
670
380580
3,5005,700
MSA2212fc
MSA2212fcMSA2212fc
1,000
1,000
DA - 12991 EMEA — Version 5 — September 15, 2008
Page 5
QuickSpecs
Family Information
Overview
Overview
OverviewOverview
Server Compatibility
Server Compatibility
Server CompatibilityServer Compatibility
Industry Standard X86
Industry Standard X86
Industry Standard X86Industry Standard X86
servers support
servers support
servers supportservers support
OS Support
OS Support
OS SupportOS Support
Oracle
Oracle
OracleOracle
Web Browser support
Web Browser support
Web Browser supportWeb Browser support
The MSA2000fc comes integrated with web browser based software for storage and RAID management,
setup, configuration and troubleshooting. This reduces the cost of ownership by reducing the training
and technical expertise necessary to install and maintain your HP storage solution.
Supports most HP ProLiant servers including
HP ProLiant DL, ML
HP ProLiant c-Class Blade Servers
Supports most multi-vendor industry standard 32-bit Intel and AMD based (x86) servers. HP
requires the Third-Party Server to be logo'd and listed on the Microsoft Windows Server Catalog.
Refer to the Microsoft website:
HP StorageWorks Division recommends that the Third-Party Server Vendor is an active member of
TSANet. Refer to the TSANet website for details:
Microsoft Windows Server 2008 IA32 (Standard, Enterprise, Datacenter)
Microsoft Windows Server 2008 x64 (Standard, Enterprise, Datacenter)
Microsoft Windows 2003 and 2003 R2
Microsoft Windows 2003 X64
Red Hat Linux 4 & 5 (32/64)
SuSE SLES 9 & 10 (32/64)
VMware ESX 3.0.1, 3.0.2, 3.5
Integrated Citrix XenServer HP Enterprise. Citrix Xen Enterprise 4.1.0-7846 (AMD64, EMT64)
Supported with Oracle single instance and cluster configurations for Oracle 9i, 10g, and 11g
Windows 2008 is supported with Single Instance but not RAC. This functionality is not yet
supported by Oracle.
RHEL5 Kernel Versions Including Oracle Enterprise Linux, OEL
NOTE:
NOTE:
NOTE:NOTE:
MSA2000fc supports target based management, and includes a Web interface and a telnet
interface, and requires a web browser for management. Only Microsoft Internet Explorer V6.X and
above, and Mozilla Firefox 1.0.7 or later are supported
MSA2000 Snapshot andMSA2000 Snapshot and
Volume Copy Software
Volume Copy Software
Volume Copy SoftwareVolume Copy Software
Path failover (MPIO)
Path failover (MPIO)
Path failover (MPIO)Path failover (MPIO)
Product Features
Product Features
Product FeaturesProduct Features
Data Protection
Data Protection
Data ProtectionData Protection
Snapshots create up to 64 point-in-time pictures of data
Volume Copies create up to 128 point-in-time copies of data
Recovery is instant - revert data from any previous Snapshot or Volume Copy
Backup 'snapped' data to disk, virtual tape, or physical tape without a backup window
Data Testing
Data Testing
Data TestingData Testing
Snap or clone data to test the performance of a software application on 'offline' production data
Snap or clone data to test how a software patch or enhancement will function on 'offline;
production data
HP StorageWorks 2000 Modular Smart Array Snapshot 64 Software LTU
HP StorageWorks 2000 Modular Smart Array Snapshot 8 Software LTU
HP StorageWorks 2000 Modular Smart Array Snapshot 8 to 64 Upgrade Software
MPIO Basic Failover for Windows provides a single multi-path solution for HP StorageWorks
MSA2000fc Modular Smart Array on HP ProLiant servers by providing basic path failover. Supports
Windows 2003, Windows 2003 R2, and Windows 2003 X64 operating systems.
HP StorageWorks StorageHP StorageWorks Storage
Mirroring
Mirroring
MirroringMirroring
HP MPIO Full Featured DSM for MSA2000fc v2.2.0.22
Microsoft Windows 2008: Microsoft MPIO is bundled with Windows Server 2008 and must be
installed as an operating system feature.
Failover support for Linux is with Device Mapper 4.0.
Xen: Inbox Device Mapper
HP StorageWorks Storage Mirroring Software provides host-based, continuous replication for customers
seeking a low-cost alternative to fabric or array-based replication. Patented replication and failover
technology continuously captures byte-level data changes as they happen and replicates those changes
to one or more target servers at any location without geographic limitations. By replicating only the bytes
that change, Storage Mirroring Software uses the absolute minimum bandwidth on your existing LAN or
WAN to replicate your data. Storage Mirroring also provides server failover where a production server
can automatically be ‘replaced’ by the storage mirroring server in the event of failure. Couple Storage
Mirroring with MSA2000 Snapshots and/or Volume Copy to achieve an Enterprise class data protection
strategy creating different data recovery points using continuous data protection with Storage Mirroring
and point-in-time data protection with Snapshots and/or Volume Copy.
Storage Mirroring Software supports:
Any DAS, NAS, and SAN storage device.
Any Windows ProLiant server including all ML, DL, and BL platforms
Many Windows platforms including Windows Server 2000, Windows Server 2003, Windows
Server 2003 R2, Windows Storage Server 2003, Windows Storage Server 2003 R2, 64bit
Windows, and Windows on Itanium
For more information visit
HP StorageWorks Storage Mirroring Software Windows Server Edition 1 LTU