Integrated
Washing Machine
HJA8501
HJA8511
User & installation Guide
Built-In Appliances
Dear Customer,
Congratulations on your choice of washing machine which has been designed to give you excellent service.
The user manual will help you use your machine quickly and safely.
•Please read this user manual before installing and using the machine.
•Always follow the safety instructions.
•Keep this user manual within easy reach for future reference.
•Please read any other documents supplied with the product.
Explanation of symbols
Throughout this user manual the following symbols are used:
Important information or useful hints about usage.
Warning for hazardous situations with regard to life and property.
Warning for electric shock.
This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment.
02_
User manual HJA8501 / HJA8511
Index
01 - Your washing machine |
4 |
Overview |
4 |
Technical specifications |
4 |
02 - Warnings & safety information |
5 |
General Safety |
5 |
First Use |
5 |
Intended use |
5 |
Safety instructions |
5 |
If there are children in your house |
6 |
03 - Installation |
7 |
Appropriate installation location |
7 |
Removing packaging reinforcement |
7 |
Removing the transportation locks |
7 |
Connecting water supply |
8 |
Connecting to the drain |
9 |
Adjusting the feet |
9 |
Electrical connection |
10 |
Electrical Requirements |
10 |
Fitting a Different Plug |
10 |
First use |
11 |
Disposing of packaging material |
11 |
Transportation of the product |
11 |
Disposing of the old product |
11 |
04 - Preparation |
12 |
Things to be done for energy saving |
12 |
Sorting the laundry |
12 |
Preparing laundry for washing |
13 |
Correct load capacity |
13 |
Loading the laundry |
14 |
Detergents and softeners |
14 |
Tips for efficient washing |
16 |
05 - Selecting a Programme & |
|
Operating Your Machine |
17 |
Control panel |
17 |
Display symbols |
18 |
Turning the machine on |
18 |
Programme selection |
18 |
Main Programmes |
18 |
Additional programmes |
19 |
Special programmes |
20 |
Temperature selection |
20 |
Spin Speed selection |
20 |
Programme and consumption table |
21 |
Auxiliary functions |
22 |
Time display |
23 |
Starting the Programme |
23 |
Progress of programme |
23 |
Changing the selections after |
|
the programme has started |
24 |
Switching the machine to standby mode |
24 |
Child-proof lock |
25 |
Ending the programme through cancelling 25
Programme in rinse hold mode |
25 |
End of programme |
25 |
06 - Maintenance & Cleaning |
26 |
Detergent drawer |
26 |
Body and Control panel |
26 |
Inlet water filters |
27 |
Draining remaining water and |
|
cleaning pump filter |
27 |
07 - Troubleshooting |
28 |
08 - Built-in Installation |
34 |
Standard height door & false drawer |
34 |
Full height door |
34 |
Adjustable feet |
34 |
Filler Strip |
34 |
09 - Guarantee |
36 |
Contents _ 03
Built-In Appliances
01 - Your washing machine
Overview
1
8
2
3 7 
1.Power cable
2. |
Top lid |
6 |
|
3. |
Control panel |
|
|
4. |
Filter cap |
|
|
5. |
Adjustable feet |
|
|
6. |
Door |
|
|
7. |
Detergent drawer |
|
4 |
8. |
Drain hose |
|
|
|
|
||
|
|
|
5 |
Technical specification |
|
||
|
|
HJA8511 |
HJA8501 |
Maximum Dry Capacity (kg) |
7 |
7 |
|
Height (cm) |
82 |
82 |
|
Width (cm) |
60 |
60 |
|
Depth (cm) |
54 |
54 |
|
Net Weight (+/- 4Kg.) |
73 |
72 |
|
Electrical Input (V/Hz) |
230V / 50Hz |
230V / 50Hz |
|
Total Current (A) |
10 |
10 |
|
Total Power (W) |
2200 |
2200 |
|
Spin Speed (rpm max.) |
1600 |
1400 |
|
Stand-by Mode Power (W) |
1.40 |
1.40 |
|
Off Power Mode (W) |
0.20 |
0.20 |
|
Technical specifications may be changed without prior notice to improve the quality of the product. Figures in this manual are schematic and may not match the product exactly.
Values stated on the product labels or in the documentation accompanying it are obtained in laboratory conditions in accordance with the relevant standards. Depending on operational and environmental conditions of the product, these values may vary.
04_ Your Washing Machine
User manual HJA8501 / HJA8511
02 - Warnings & safety information
Failure to read and follow these guidelines may result in personal injury or damage to the machine which may not be covered and void the guarantee.
General Safety
•Never place your machine on a carpet covered floor. Otherwise, lack of airflow below your machine may cause electrical parts
to overheat and cause problems with your washing machine.
•If the power cable or mains plug is damaged you must call Authorized Service for repair.
•Check water hoses for wear. Do not use old/ used water inlet hoses. These may cause stains on your laundry.
•Fit the drain hose into the discharge housing securely to prevent any water leakage and to allow machine to discharge water as required. It is very important that the water intake and drain hoses are not folded, squeezed, or broken when the appliance is pushed into place after it is installed or cleaned.
•Your washing machine is designed to continue operating after the event of a power interruption. You cannot cancel any programme by pressing the “On/Off button.” Your machine will not resume its
programme when the power restores. Press the “Start/Pause/Cancel” button to cancel the programme (See Page. 25)
•There may be some water in your machine when you receive it. This is from the quality control process and is normal. It is not harmful to your machine.
•Some problems you may encounter may be caused by the software. Press “Start/Pause/ Cancel” button for 3 seconds to cancel the programme set in your machine before calling the authorized service.
First Use
•Before washing your 1st load please run the machine on the ‘Machine Clean’ programme.
•Ensure that the cold water connection has been made correctly when installing your machine. Otherwise, your laundry may come out hot at the end of the washing process and may wear out faster.
•If the fuse or circuit breaker is less than 16
Amperes, please have a qualified electrician install a 16 Ampere fuse or circuit breaker.
•Please be sure that the tap water supply and water drainage systems are appropriate. If they are not, call a qualified plumber to have any necessary arrangements carried out.
Intended use
•This product has been designed for home use.
•The appliance may only be used for washing and rinsing of textiles that are marked accordingly.
•Only detergents, softeners and supplements suitable for washing machines may be used.
•Observe the care instructions labelled on textile products and any other instructions given by companies that produce detergents for your machine.
•This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Safety instructions
•This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity.
•The supply and draining hoses must always be securely fastened and remain in an undamaged state.
•Never open the door or remove the filter while there is still water in the drum. Otherwise, there may be the risk of flooding and possible injury due to the hot water.
•Never force open the locked door! The door will be ready to open just a few minutes after the washing cycle comes to an end.
•Unplug the machine when it is not in use.
•Never wash down the appliance with a water hose! There is the risk of electric shock! Always disconnect from the mains by unplugging before cleaning.
•Never touch the plug with wet hands. Never unplug by pulling on the cable, always pull out from the plug only. Do not operate the machine if the power cord or plug is damaged.
Warning and safety information _ 05
Built-In Appliances
•Never attempt to repair the machine yourself. Otherwise, you may be putting your and other’s lives in danger.
•For malfunctions that cannot be solved by information in the operating manual turn off the machine, unplug it, turn off the water tap and contact an authorized service agent.
If there are children in your house
•Electrical appliances may be dangerous for the children. Keep children away from the machine when it is operating. Do not let them tamper with the machine.
•Close the door when you leave the area where the machine is located.
•Store all detergents in a safe place out of reach of the children.
06_ Warning and safety information
User manual HJA8501 / HJA8511
03 - Installation
To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out.
Preparation of the location and electrical, tap water and waste water installations at the place of installation is customer’s responsibility.
Installation and electrical connections of the product must be carried out by the suitably qualified persons. Manufacturer shall not be held liable for damages that may arise from installation procedures.
Prior to installation, visually check if the product has any damage on it. If so, do not have it installed. Damaged products may cause risks for your safety.
Make sure that the water inlet and discharge hoses as well as the power cable are not folded, kinked or crushed while pushing the product into its place after installation or cleaning procedures.
Appropriate installation location
•Place the machine on a rigid floor. Do not place it on a long pile rug or similar surfaces.
•Total weight of the washing machine - with full load - is approx. 80 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!
•Do not install the product where temperature may fall below 0ºC.
•Place the product at least 1 cm away from the edges of other furniture.
Removing packaging reinforcement
Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.
Removing transportation locks
Do not remove the transportation locks before taking out the packaging reinforcement.
Remove the transportation safety bolts before operating the washing machine, otherwise, the product will be damaged.
1.Loosen all the bolts with a spanner until they rotate freely (C).
2.Remove transportation safety bolts by turning them gently.
Installation _ 07
Built-In Appliances
Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.
1. Connect the special hose supplied with the product to the water inlet on the product.
3. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel.
Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.
Never move the product without the transportation safety bolts properly fixed in place!
Connecting water supply
The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1MPa). It is necessary to have 10 – 80 litres of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher.
Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product will switch to protection mode and will not operate.
Ensure that the cold water connection is made correctly when installing the product.
2.Tighten hose nut by hand. Never use a wrench when tightening the nut.
3.Open the tap completely after making the hose connection to check for water leaks at the connection point. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.
08_ Installation
User manual HJA8501 / HJA8511
Connecting to the drain
•The end of the drain hose must be directly connected to the wastewater.
Your floor will be flooded if the hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot come out.
•The hose should be attached to a waste pipe height of at least 40 cm, and 100 cm at most.
•If the hose is too high or too low problems with water retention and discharge will be encountered.
•To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not push waste hose too far into waste pipe and ensure an ‘S’ bend is formed with the hose.
•The end of the hose should not be bent, it should not be stepped on and the hose must not be kinked between the drain and the machine.
Adjusting the feet
In order to ensure that the product operates silently and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move and suffer vibration problems
1.Loosen the lock nuts on the feet by hand.
2.Adjust the feet until the product stands level and balanced.
3.Tighten all lock nuts again by hand.
•If the hose is too short it may be extended to a Max. Length of 3.2m. Ensure all joints are tight to avoid leaks.
Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
Installation _ 09
Built-In Appliances
Electrical connection
Connect the product to an earthed outlet protected by a fuse complying with the values in the “Technical specifications” table. Our company shall not be liable for any damages that will arise when the product is used without earthing in accordance with the local regulations.
•Do not make connections via extension cables or multi-plugs.
Damaged power cables must be replaced by qualified persons
Electrical requirements
Before you insert the plug into the wall socket make sure that the voltage and the frequency shown
in the rating label corresponds to your electricity supply.
We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket in a readily accessible position.
This appliance must be earthed
If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted.
Destroy the old plug, which is cut off as a plug with a bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.
The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted.
Important Fitting a different plug
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals on your plug, proceed as follows:
1.Connect the green - yellow or green (earth) wire to the terminal in the plug marked ‘E’ or with the symbol f or coloured green and yellow or green.
2.Connect the blue (neutral) wire to the terminal in the plug marked ‘N’ or coloured black.
3.Connect the brown (live) wire to the terminal in the plug marked ‘L’ or coloured red
With the alternative plugs a 13A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.
10_ Installation
|
|
User manual HJA8501 / HJA8511 |
|
|
|
|
|
First use |
Transportation of the product |
||
|
|
|
|
Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections “Important safety instructions” and “Installation”.
To prepare the product for washing laundry, perform first operation with ‘Machine Clean’ programme. Before starting the programme, put max. 100 g of powder into the main wash detergent Compartment (compartment No. II). If using tablets, put only one tablet into compartment No. II. Dry the inside of the door seal with a clean piece of cloth after the programme has come to an end.
Use detergent suitable for automatic washing machines.
Disposing of packaging material
Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach of the children.
Packaging materials of the product are manufactured from recyclable materials. Dispose of them properly and sort in accordance with recycled waste instructions. Do not dispose of them with normal domestic waste.
1.Drain any remaining water in the product completely; see, “Draining remaining water and cleaning the pump filter”.
2.Install transportation safety bolts in the reverse order of removal procedure; see, “Removing the transportation locks”.
Never move the product without the transportation safety bolts properly fixed in place!
Disposing of the old product
Dispose of the old product in an environmentally friendly manner.
Refer to your local dealer or solid waste collection centre in your area to learn how to dispose of your product.
For children’s safety, cut the power cable and break the locking mechanism of the door so that it will be nonfunctional before disposing of the product.
Installation _ 11
Built-In Appliances
04 - Preparation
Things to be done for energy saving
Following information will help you use the product in an ecological and energy-efficient manner.
•Operate the product to the highest capacity allowed by the programme you have selected, but do not overload; see, “Programme and consumption table”.
•Always follow the instructions on the detergent packaging.
•Wash slightly soiled laundry at low temperatures.
•Use faster programmes for small quantities of lightly soiled laundry.
•Do not use prewash and high temperatures for laundry that is not heavily soiled or stained.
•If you plan to dry your laundry in a dryer, select the highest spin speed recommended during washing process.
•Do not use detergent in excess of the amount recommended on the detergent package.
Sorting the laundry
•Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature.
•Always obey the instructions given on the garment tags.
Washing water |
Wash with sensitive, |
temperature |
.short programmes |
Bleach can be |
Do not use bleach |
used |
|
Suitable for drier |
Do not dry with drier |
Hang without |
Can be ironed with |
spinning |
hot iron |
Non machine-washable |
Do not wash |
|
|
|
|
|
|
|
|
|
|
|
Dry-cleanable |
Do not dry-clean |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dry horizontally |
Can be ironed |
with warm iron |
Dry on a hanger |
Do not iron |
12_ Preparation
Loading...