HOTPOINT/ARISTON ZHU6 F1C XI Daily Reference Guide

Read the Instructions for Use carefully before using the appliance.

1 2

QUICK START GUIDE

PROFREEZE FREEZE CONTROL indicator

ProFreeze / Freeze Control is an advanced technology that reduces freeze burns and food preserves its original quality and color.

ON/STANDBY button

To put the product in Stand-by, press and hold for 3 seconds. All the icons turn off except On/Standby indicator

. To reactivate the appliance

press once (briefly) this button.

TEMPERATURE DISPLAY

FAST FREEZE button

To activate/deactivate the Fast Freeze function simply press Fast Freeze button (see the Instructions for Use). The Fast Freeze function switches off automatically after 50 hours.

1. Control panel *

2. Light (LED system) *

3. Ice packs*

4. Ice Mate* or Ice tray*

5. Drawer divider*

6. Bottle rack*

7. Glass shelves

8. Rating plate with commercial name *

9. Door reversibility kit *

10. Area for freezing fresh food or to store

frozenfood

11. Area for storing frozen foods

12. Door seal

* Available on selected models

HOW TO START THE APPLIANCE

After plugging the appliance to the mains, it starts the operation automatically. After starting the appliance, wait at least 4-6 hours before placing food into the appliance. When the appliance is connected to the power supply, the display lights up and all the icons appear on the display for approximately 1 second. The default (factory) values of the freezer compartment settings light-up.

HOW TO REVERSE DOOR SWING

- see enclosed Instructions for Use (Version_2) Is recommended to reverse door swing by two persons. There is not foreseen door reversibility for:

- models with integrated handle

- models with glass panel on the door.

Specifications, technical data and images mayvary from model to model.

ECO NIGHT FUNCTION (NIGHT TIME RATE) / FREEZE CONTROL button Eco Night Function

Press to activate/deactivate the Eco Night function. The Eco Night function enables appliance energy

STOP ALARM button

Press in case of alarm (see the below Alarm Table).

consumption to be concentrated in the reduced rate hours, generally at night (see the Instructions for Use).

TEMPERATURE SETTING button

The appliance is normally factory-set for operation at the recommended temperature of -18°C. The internal temperature

BLACK OUT ALARM

Long Black-out Alarm indicator. (see

the Instructions for Use) can be adjusted between -16°C and -24°C, proceeding as follows:

• Press to change the set point (°C). The storage temperature

can be changed by -1°C with each pressure of the button: the value changes cyclically between -16°C and -24°C.

ALARMS TABLE

ALARMS TYPE Signal Cause Cure

Door open alarm

Temperature alarm

Long Black-Out alarm

Malfunction The letter “F” blinks on the display (°C). Product malfunction. Contact the After-sales Service.

The acoustical alarm is activated and the Alarm Indicator

The Temperature display blinks (°C) and the Alarm Indicator

The Black Out Alarm icon

Temperature display (°C) blinks, showing the maximum temperature reached during

blackout.

remains on, the Alarm indicator blinks and the

blinks.

remains on.

The door has remained open for more than 2 minutes. Close the door or press the Stop Alarm to mute the acoustical alarm.

The inside temperature is not adequate.

Prolonged power failure, able to cause the inside temperature to increase to 0°C.

Press the Stop Alarm button

blinks and the Alarm Indicator

Press the Stop Alarm button

blinks and the Alarm Indicator

; the acoustical alarm stops, the Temperature Display (°C)

remains on until a temperature < -10°C is reached.

; the acoustical alarm stops, the Temperature Display (°C)

remains on until a temperature < -10°C is reached.

To receive the assistance call the number shown on the warranty booklet or follow the instruction on the web site www.hotpoint.eu

Printed in Italy 04/16- Whirlpool

19514479500