HOTPOINT/ARISTON MTAA 24S User Manual

MTAA 24S

English

Operating Instructions

2-DOOR FRIDGE

Contents

Operating Instructions, 1 Assistance,2

Description of the appliance, 3 Reversible doors, 4 Installation, 5

Start-up and use, 6 Maintenance and care, 6 Precautions and tips, 7 Troubleshooting, 7

Français

Mode d’emploi

REFRIGERATEUR 2 PORTES

Sommaire

Mode d’emploi, 2 Assistance, 2

Description de l’appareil, 3

Rιversibilitι des portes, 4

Installation, 8

Mise en marche et utilisation, 9 Entretien et soin, 9 Précautions et conseils, 10 Anomalies et remèdes, 10

AR

يﺰﯿﻠﺠﻧإ

ﻞﯿﻐﺸﺘﻟا تﺎﻤﯿﻠﻌﺗ بﺎﺑ 2 ﺔﺟﻼﺛ

تﺎﯾﻮﺘﺤﻤﻟا

1 ،ﻞﯿﻐﺸﺘﻟا تﺎﻤﯿﻠﻌﺗ 4,ةﺪﻋﺎﺴﻤﻟا

9 ،زﺎﮭﺠﻟا ﻒﺻو

17 ،ﺐﻠﻘﻠﻟ ﺔﻠﺑﺎﻘﻟا باﻮﺑﻷا

18 ،ﺐﯿﻛﺮﺘﻟا

19 ،ماﺪﺨﺘﺳﻻاو ﻞﯿﻐﺸﺘﻟا ءﺪﺑ

19 ،ﺔﯾﺎﻨﻌﻟاو ﺔﻧﺎﯿﺼﻟا

20 ،ﺢﺋﺎﺼﻨﻟاو ﺮﯿﺑاﺪﺘﻟا

20 ،ﻞﻠﺨﻟا ﻰﻠﻋ رﻮﺜﻌﻟا

Assistance

Before calling for Assistance:

Check if the malfunction can be solved on your own (see Troubleshooting).

If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre

Communicating:

type of malfunction

appliance model (Mod.)

serial number (S/N)

This information can be found on the data plate located on the bottom left side of the refrigerator compartment.

Never call on unauthorized technicians and always refuse spare parts which are not originals.

Assistance

Avant de contacter le centre d’Assistance :

Vérifiez si vous pouvez résoudre l’anomalie vous-même (voir Anomalies et Remèdes).

Si, malgré tous ces contrôles, l’appareil ne fonctionne toujours pas et si l’inconvénient persiste, appelez le service après-vente le plus proche.

Signalez-lui :

le type d’anomalie

le modèle de l’appareil (Mod.)

le numéro de série (S/N)

Vous trouverez tous ces renseignements sur l’étiquette signalétique placée dans le compartiment réfrigérateur en bas à gauche.

Ne vous adressez jamais à des techniciens non agréés et exigez toujours l’installation de pièces détachées originales.

- model - modèle

- serial number

- numéro de série

2

HOTPOINT/ARISTON MTAA 24S User Manual

Description of the appliance

Overall view

The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages.

1Levelling FEET•

2FRUIT and VEGETABLE bin

3SHELVES•

4TEMPERATURE REGULATING Knob

5FREEZER and STORAGE compartment

6Removable lidded shelf with EGG TRAY

7Removable multipurpose SHELVES•

8Compartiment for a 2 LITRE BOTTLE

9BOTTLE shelf

• Varies by number and/or position. * Available only on certain models.

Description de l’appareil

Vue d’ensemble

Ces instructions d’utilisation s’appliquent à plusieurs modèles, il se peut donc que les composants illustrés présentent des différences par rapport à ceux de l’appareil que vous avez acheté. Vous trouverez dans les pages suivantes la description des objets plus complexes.

1PIED de réglage

2Bac FRUITS et LEGUMES

3CLAYETTE•

4Commande pour RÉGLER LA TEMPÉRATURE

5Compartiment CONGELATION et CONSERVATION

6Balconnet amovible à abattant, contenant un SUPPORT A OEUFS

7Balconnet amovible PORTE-OBJETS

8Compartiment pour une bouteille de 2 LITRE

9Balconnet BOUTEILLES

• Leur nombre et/ou leur emplacement peut varier. * N’existe que sur certains modèles.

5

6

4

7 3

8

2

9

1

3

Reversible doors

If it is necessary to change the direction in which the doors open,

please contact the Technical Assistance Centre.

Réversibilité des portes

Si une inversion du sense d’ouverture des portes s’avère nécessaire, faire appel à notre service d’assistance technique.

4

Installation

!Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance.

!Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.

4.Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

5.In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

The appliance is earthed and the plug is compliant with the law.

The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

TEMPERATURE Indicator light*: to identify the coldest area in the refrigerator.

1.Check that OK appears clearly on the indicator light (see diagram).

2.If the word “OK” does not appear it means that the temperature is too high: adjust the REFRIGERATOR

OPERATION knob to a higher position (colder) and wait

approximately 10 hours until the temperature has been GB stabilised.

3.Check the indicator light again: if necessary, readjust it following the initial process. If large quantities of food have been added or if the refrigerator door has been opened frequently, it is normal for the indicator not to show OK. Wait at least 10 hours before adjusting the REFRIGERATOR OPERATION knob to a higher setting.

Start-up and use

Starting the appliance

!Before starting the appliance, follow the installation instructions (see Installation).

!Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate.

1.Insert the plug into the socket and ensure that the internal light illuminates.

2.Turn the TEMPERATURE ADJUSTMENT knob to an average value. After a few hours you will be able to put food in the refrigerator.

Setting the temperature

The temperature inside the refrigerator compartment automatically adjusts itself according to the position of the TEMPERATURE ADJUSTMENT knob.

1 = warmest 5 = coldest We recommend, however, a medium position.

The cooling section of the refrigerator is located inside the back wall of the refrigerator compartment for increased space and improved aesthetics. During operation, the back wall will be covered in frost or water droplets depending on whether the compressor is operating or paused. Do not worry, the refrigerator is functioning normally.

If the TEMPERATURE ADJUSTMENT knob has been set on high values with large quantities of food and with a high

ambient temperature, the appliance can operate continuously, resulting in excessive frost formation and excessive energy consumption: compensate for this by shifting the knob towards lower values (defrosting will occur automatically). In static appliances, the air circulates in a natural way: the colder air tends to move downwards as it is heavier. The food should be

stored as follows:

Using the refrigerator to its full potential

Use the TEMPERATURE ADJUSTMENT knob to adjust the temperature (see Description).

Place only cold or lukewarm foods in the compartment, not hot foods (see Precautions and tips).

Remember that cooked foods do not last longer than raw foods.

Do not store liquids in open containers. They will increase humidity in the refrigerator and cause condensation to form.

SHELVES: with or without grill.

Due to the special guides the shelves are removable and the height is adjustable (see diagram), allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf.

5

GB

Using the freezer to its full potential

Do not re-freeze food that is defrosting or that has already been defrosted. These foods must be cooked and eaten (within 24 hours).

Fresh food that needs to be frozen must not come into contact with food that has already been defrosted. Fresh food must be stored above the grill in the freezer compartment and if possible be in direct contact with the walls (side and rear), where the temperature drops below -18°C and guarantees rapid freezing.

Do not place glass bottles which contain liquids, and which are corked or hermetically sealed in the freezer because they could break.

The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical

properties located on the bottom left side of the refrigerator compartment (for example: Kg/24h: 4)

!Do not open the door during freezing.

!If there is a power cut or malfunction, do not open the freezer door. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9 -14 hours.

!If the room temperature drops below 14°C for an extended period of time, the ideal temperature will not be reached in the

freezer compartment and food preservation will be reduced.

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply.

It is not sufficient to set the temperature adjustment knobs (appliance off) to eliminate all electrical contact.

Cleaning the appliance

The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. Do not use solvents, abrasive products, bleach or ammonia.

The removable accessories may be soaked in warm water and soap or dishwashing liquid. Rinse and dry them carefully.

The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance.

Avoiding mould and unpleasant odours

The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly.

If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open.

Defrosting the appliance

! Follow the instructions below.

Do not speed up the defrosting process by using any devices or tools other than the scraper provided, you may damage the refrigeration circuit.

Food hygiene

1. Once you have bought your food, remove all external

packaging made of paper/cardboard or other wrappers, which could introduce bacteria or dirt inside your refrigerator.

2.Protect the food, (especially easily perishable items and those that have a strong smell), in order to avoid contact between them, thereby removing both the possibility of germ/bacteria contamination as well as the diffusion of strong odours inside the fridge.

3.Store all food in such a way as to ensure air can circulate freely between different items.

4.Keep the inside of your fridge clean, taking care not to use oxidiser or abrasive products.

5.Remove all food past its expiry date from the refrigerator.

6.For the correct preservation of food, all easily perishable items (soft cheeses, raw fish, meat, etc.) should be stored in the coldest zone of the fridge compartment, i.e. just above the salad crisper where the temperature indicator is situated.

Defrosting the refrigerator compartment

The refrigerator has an automatic defrosting function: water is ducted to the back of the appliance by a special discharge outlet (see diagram) where the heat produced by the compressor causes it to evaporate. It is necessary to clean the discharge hole regularly so that the water can flow out easily.

Defrosting the freezer compartment

If the frost layer is greater than 5 mm, it is necessary to defrost manually:

1.the TEMPERATURE ADJUSTMENT knob to the position

.

2.Wrap frozen foods in newspaper and place them in another freezer or in a cool place.

3.Leave the door open until the frost has melted completely. This can be made easier by placing containers with lukewarm water in the freezer compartment.

4.Clean and dry the freezer compartment carefully before switching the appliance on again.

5.Wait for approximately 2 hours, i.e. until the ideal storage conditions have been restored, before placing food in the freezer compartment.

Replacing the light bulb

To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Follow the instructions below.

Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover (15W or 25W).

1

2

6

Loading...
+ 14 hidden pages