Hotpoint NSWM863CW Instruction manual

4 (2)
Hotpoint NSWM863CW Instruction manual

Quick Guide

THANK YOU FOR PURCHASING A HOTPOINT PRODUCT.

To receive more comprehensive assistance, register the appliance on

www.hotpoint.eu/register

GB

Before using the appliance carefully read the Health and Safety guide.

Before using the machine, it is imperative that the transport bolts are removed. For more detailed instructions on how to remove them, see the Installation Guide.

CONTROL PANEL

1.

ON/OFF button

1

2

3

4

2.

CHILD LOCK button

 

 

 

 

3.

EXTRA TOUCH button

 

 

 

 

4.

EXTRA TOUCH indicator lights

 

 

 

 

5.

START/PAUSE button and indicator light

 

DISPLAY

 

 

6.

OPTION button and indicator light

 

 

 

 

 

 

 

7.DELAY START button

8.SPIN button

9.TEMPERATURE button

10.WASH CYCLE SELECTOR KNOB

10

9

8

7

6

5

WASH CYCLE TABLE

Maximum load 8 kg

 

 

 

 

 

 

Detergents and

Recommended

Power input in off mode 0.5 W / in left-on mode 8 W

 

 

 

 

Additives

detergent

 

 

 

 

Temperature

Max.

Max.

Duration

Wash

Fabric

 

 

 

 

Wash cycle

 

spin speed

load

softener

Powder

Liquid

 

 

 

 

Default

Range

(rpm)

(kg)

(minutes)

1

2

 

 

1

 

Mixed

 

40°C

- 40°C

1600

8

**

 

 

 

 

 

2

 

Eco Cotton

(1)

60°C

60°C

1600

8

225

 

 

 

 

 

40°C

1600

8

220

 

 

 

 

 

 

 

 

 

3

 

Cotton (2)

 

40°C

- 60°C

1600

8

220

 

 

 

 

4

 

Synthetics (3)

40°C

- 60°C

1200

4,5

175

 

 

 

 

5

 

Delicates

 

40°C

- 40°C

1000

4,5

**

 

 

 

6

 

Wool

 

40°C

- 40°C

800

2

**

 

 

 

7

 

White

 

40°C

- 90°C

1600

8

**

 

 

 

8

 

Duvet

 

30°C

- 30°C

1000

3,5

**

 

 

 

9

 

Rapid 30 min

30°C

- 30°C

800

4,5

**

 

 

 

10

 

Full Load 45 min

40°C

- 40°C

1200

8

**

 

 

 

11

 

Shirts

 

40°C

- 40°C

600

2

**

 

 

 

12

 

Baby

 

40°C

- 40°C

800

4

**

 

 

 

13

 

Anti Stain 40°

40°C

- 40°C

1600

8

**

 

 

 

14

 

Anti Allergy

 

60°C

- 60°C

1600

5

**

 

 

 

 

 

 

Spin & Drain *

1600

8

**

15

 

16

 

Rinse & Spin

 

1600

8

**

 

Required dosage

Optional dosage

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Residual dampness %

Energy consumption kWh

44

1,08

44

1,03

44

1,03

53

0,54

 

 

Total water l

55

92

92

55

The cycle duration indicated on the display or instruction manual is an estimate based on standard conditions. The actual duration may vary in relation to several factors, such as the temperature and pressure of the incoming water, ambient temperature, amount of detergent, load quantity and type, load balancing and any additional options selected.

1) Test wash cycle in compliance with regulation 1061/2010:

This cycle is designed for normally soiled cotton loads and is the most efficient in terms of both electricity and water consumption; it should be used for garments washable at 60°C or at 40°C. The actual washing temperature may differ from the indicated value.

For all testing institutes:

2)Long cotton cycle: set programme 3 at temperature 40°C.

3)Long synthetics cycle: set cycle 4 at a temperature of 40°C.

*By selecting the 15 cycle and excluding the spin cycle, the washing machine will drain only.

**The duration of the wash cycles can be checked on the display.

***If “Steam Hygiene” option is set, the duration of the wash cycles will increase.

PRODUCT DESCRIPTION

1.Top

2.Detergent dispenser drawer

3.Control panel

4.Handle

5.Porthole door

6.Drain pump (behind the plinth)

7.Plinth (removable)

8.Adjustable feet (2)

 

1.

2.

3.

 

4.

 

5.

 

6.

7.

 

 

8.

DETERGENT DISPENSER DRAWER

Compartment *:

B

A

Do not insert detergent in this compartment.

 

 

Compartment 1: Washing detergent (powder

 

 

or liquid)

 

 

If liquid detergent is used, the removable plastic

 

2 * 1

partition A (supplied) should be used for proper

 

dosage.

 

 

If powder detergent is used, place the partition

 

 

into slot B.

 

 

Compartment 2: Additives (fabric softeners, etc.)

 

 

The fabric softener must not exceed the “MAX” level.

!Use powder detergent for white cotton garments, for pre-washing, and for washing at temperatures over 60°C.

!Follow the instructions given on the detergent packaging.

WASH CYCLES

Follow the instructions on the symbols of the garment’s wash care label. The value indicated in the symbol is the maximum recommended temperature for washing the garment.

Mixed

For washing lightly to normally soiled resistant garments in

cotton, linen, synthetic fibres and mixed fibres.

Eco Cotton

Suitable for washing moderately soiled cotton garments. At

40°C and 60°C it is the standard cycle for washing cotton garments, and is the most efficient in terms of combined water and electricity

consumption.

Cotton

Suitable for washing towels, underwear, table cloths, etc. made of

resistant linen and cotton that are moderately to heavily soiled.

Synthetics

Suitable for washing moderately soiled garments made of synthetic fibres

(e.g. polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton fibres.

Delicates

Suitable for washing lightly soiled garments made of synthetic fibres (e.g.

polyester, polyacrylic, viscose, etc.) or mixed synthetic-cotton fibres.

Wool - Woolmark Apparel Care - Green:

The“Wool” wash cycle is approved by theWoolmark Company

for washing wool garments classified as“hand-washable”, provided that the wash complies with the instructions appearing on the garment’s label and with those provided by

the manufacturer of this washing machine. (M1127)

White

For heavily soiled whites and resistant colours.

Duvet

Suitable for washing clothing padded with goose down, such as single duvets (weighing under3,5 kg), cushions or down jackets. Duvets should be loaded into the drum with their edges folded inwards and no more than ¾ of the total drum volume should be used up. For best results, it is

advisable to use liquid detergent to be poured into the detergent drawer.

Rapid 30 min

For washing lightly soiled garments in a short time. Not suitable for wool,

silk and garments to be washed by hand.

Full Load 45 min

Suitable for washing a full load of cotton clothes moderately soiled in 45

minutes.

Shirts

Use the special wash cycle to wash shirts in different fabrics and colours

to guarantee they receive the best possible care.

Baby

Use the special wash cycle to remove the soiling typically caused by babies, while removing all traces of detergent from nappies in order to prevent the delicate skin of babies from suffering allergic reactions. The cycle has been designed to reduce the amount of bacteria by using a greater quantity of water and optimising the effect of special disinfecting

additives added to the detergent.

Anti Stain 40°

the programme is suitable to heavily-soiled garments with resistant colours. It ensures a washing class that is higher than the standard class (A class). When running the programme, do not mix garments of different colours. We recommend the use of powder detergent. Pre-treatment with

special additives is recommended if there are particularly obstinate stains.

Anti Allergy

Suitable for removing major allergens such as pollen, mites and cat or

dog hair.

Spin & Drain

Spins the load then empties the water. For resilient garments. If you

exclude the spin cycle, the machine will drain only.

Rinse & Spin

Rinses and then spins. For resilient garments.

DISPLAY

The display is useful when programming the washing machine and provides plenty of information.

h

The duration of the available wash cycles and the remaining time of a running cycle appear (the display will show the maximum duration of the cycle chosen, which may decrease after several minutes, since the effective duration of the programme varies depending on the wash load and the settings chosen); if the DELAY START option has been set, the countdown to the start of the selected wash cycle will appear.

Pressing the corresponding button allows you to view the maximum spin speed and temperature values attained by the machine during the set wash cycle, or the values selected most recently, if these are compatible with the set wash cycle.

Locked door indicator

When lit, the symbol indicates that the door is locked. To prevent any damage, wait until the symbol turns off before opening the door.

To open the door while a cycle is in progress, press the START/PAUSE

button ; if the symbol is off, the door can be opened.

FIRST-TIME USE

Once the appliance has been installed, and before it is used for the first time, run a wash cycle with a very little detergent and no laundry, by

setting the “Auto-Clean” cycle. (see “CARE AND MAINTENANCE”)

DAILY USE

Prepare the laundry by following the suggestions appearing under the “TIPS AND SUGGESTIONS” section.

- Press the ON/OFF button ; the indicator light relative to START/PAUSE will flash slowly green.

-Open the door. Load the laundry while making sure not to exceed the maximum load quantity indicated in the wash cycle table.

-Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments, as described in the “DETERGENT DISPENSER DRAWER” section.

-Close the door.

-The machine automatically displays the maximum temperature and spin speed values for the selected cycle, or the most recently used settings if

they are compatible with the selected cycle. Pressing the

60°

button

 

40°

 

gradually reduces the temperature down to the cold wash “OFF” setting. Pressing the button gradually reduces the spin speed until it is completely excluded (“OFF” setting). Pressing the buttons further restores the maximum allowed values for the selected cycle.

-Select the desired wash cycle.

-Select the desired options.

- Press the START/PAUSE button to start the wash cycle; the relative

indicator light will light up steady green and the door will lock ( symbol on).

PAUSING A CYCLE

To pause the wash cycle, press the START/PAUSE button again; the indicator light will flash amber. To start the wash cycle from the point at

which it was interrupted, press the START/PAUSE button again.

OPENING THE DOOR, IF NECESSARY

Once a cycle starts, the symbol turns on to signal that the door cannot be opened. While a wash cycle is running, the door remains locked. To open the door while a cycle is under way, for example, to add or remove

garments, press the START/PAUSE

 

button to pause the cycle; the

indicator light will flash amber. If the

symbol is not lit, the door may be

opened. Press the START/PAUSE

button again to continue the cycle.

CHANGING A RUNNING WASH CYCLE

To change a wash cycle while it is in progress, pause the washing machine using the START/PAUSE button (the relative indicator light will flash amber), then select the desired cycle and press the START/PAUSE button again.

! To cancel a cycle that has already begun, press and hold the ON/OFF

button. The cycle will be stopped and the machine will switch off.

AT THE END OF THE WASH CYCLE

This will be indicated by the word “END” on the display; when the symbol switches off, the door may be opened. Open the door, unload the laundry and switch off the machine. If you do not press ON/OFF button, the washing

machine will switch off automatically after about a half of an hour.

OPTIONS

- If the selected option is not compatible with the set wash cycle, the indicator light will flash and the option will not be activated.

Extra Rinse

Selecting this option allows for enhancing rinsing efficiency and fully removing the detergent. It is particularly useful for sensitive skin.

EXTRA

 

TOUCH Extra Touch

 

After pushing the button for the 1st time, option “Rapid Option”

is

selected and the cycle duration will be reduced.

 

After pushing the button for the 2nd time, option “Steam Hygiene”

 

enhances washing performance by generating steam during the wash cycle to remove any bacteria from the fibres, which are treated at the same time.

! The steam generated during the operation of the washing machine may cause the porthole door to become hazy.

Loading...
+ 2 hidden pages