Hotpoint HB 06 UK Operating Instructions Manual

TURBO

EN Operating Instructions

1
2

3

4

5

6

11

9

12

7

10

8

220-240V

600W

HB 06 UK

BA C

44

en

PARTS AND FEATURES

1. Speed-adjusting dial

2. ON/OFF button

3. Turbo button

4. Motor unit

5. Blender attachment

6. Beaker

7. Beaker soft lid

8. Whisk attachment (only on some models)

9. Bowl lid (only on some models)

10. Chopper blade (only on some models)

11. Bowl (only on some models)

12. Bowl soft lid

Read this manual thoroughly before using
and save it for future reference

IMPORTANT INFORMATION
ON SAFETY

Before using the electrical
appliance, the following
basic precautions should
always be followed
including the following:

1. Read all instructions.

2. Before using check
that the voltage of wall
outlet correspond to the
one shown on the rating
plate.

3. Do not operate any
appliance with a
damaged cord or plug
or after the appliance
malfunctions, or is
dropped or damaged
in any manner. Return

appliance to the nearest
authorized service
facility for examination,
repair or electrical or
mechanical adjustment.

4.

If the supply cord
is damaged it must
be replaced by the
manufacturer or a
authorized service

agent or a qualied

technician in order to
avoid a hazard.

5. Unplug from outlet when
not in use, before putting
on or taking off parts,
and before cleaning.
always disconnect the
blender from the supply
if it is left unattended
and before assembling,
disassembling or
cleaning;

6. Do not let cord hang
over edge of table or
hot surface.

7. Do not immerse upper
part of blender into
water as this would give
rise to electric shock.

8.

Close supervision is