Size:
1.59 Mb
Download

GC640IX

GC640WH

GC640BK

GC751TX

GC750X

GC641IX

GCD641IX

GCA641IX

GCB641X

GCB640X

GC641IK

GCL640TK

GCL641TX

GC640TK

GCB751X

English

Operating Instructions

HOB

Contents

Operating Instructions,1

Warnings,2

Assistance,2

Description of the appliance,3

Installation,4

Start-upand use,8

Precautions and tips,8

Maintenance and care,9

Troubleshooting,9

After Sales Service,11

Guarantee,12

 

us

on

 

24

phone 24

your

 

24

 

Please08448activate

to

guarantee

GB

Warnings

WARNING: The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than8 years of age shall be kept away unless continuously supervised. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

WARNING: Unattended cooking on a hob with fat or oilcanbedangerousandmayresultinfire.NEVER try to extinguish a fire with water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.

WARNING:Dangeroffire:donotstoreitemsonthe cooking surfaces.

Never use steam cleaners or pressure cleaners on the appliance.

Remove any liquid from the lid before opening it. Do not close the glass cover (if present) when the gas burners or electric hotplates are still hot.

The appliance is not intended to be operated by means of an external timer or separate remote control system.

CAUTION: the use of inappropriate hob guards can cause accidents.

CAUTION: In case of hotplate glass breakage:

-shut immediately off all burners and any electrical heating element and isolate the appliance from the power supply

-do not touch the appliance surface.

Assistance

Communicating:

The type of problem encountered.

Appliance model (Mod.)

Serial number (S/N)

This information is found on the data plate located on the appliance and/or on the packaging.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

2

Description of the appliance

Overall view

1Support Grid for Cookware

2Gas burners

3Control Knobs for gas burners

4Ignition for Gas burners*

5Safety devices*

Gasburnersdiffer in size and power.Use the diameter of the cookware to choose the most appropriate burner to cook with.

Gasburnerignition* enablesaspecificburnertobelitautomatically.

Control Knobs for gas burners adjust the size of the flame.

Safety device* stops the gas flow if the flame is accidentally extinguished.

* Only available on certain models.

2

2

 

1

1

3

3

5

4

 

3

GB Installation

!Before operating your new appliance please read this instruction booklet carefully. It contains important information for safe use, installation and care of the appliance.

!Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

Positioning

!Keep packaging material out of the reach of children. It can become a choking or suffocation hazard (see Precautions and tips).

!Theappliancemustbeinstalledbyaqualifiedprofessionalaccordingtothe instructions provided. Incorrect installation may cause harm to people and animals or may damage property.

!This unit may be installed and used only in permanently ventilated rooms in accordance with current national regulations. The following requirements must be observed:

• The room must be equipped with an air extraction system that expels any combustion fumes. This may consist of a hood or an electric fan that automatically starts each time the appliance is switched on.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In a chimney stack or branched flue.

Directly to

 

 

 

 

 

(exclusively for cooking appliances)

the Outside

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The room must also allow proper air circulation, as air is needed for combustiontooccurnormally.Theflowofairmustnotbelessthan2m3/h per kW of installed power.

A

Examples of ventilation holes for comburant air.

Adjacent

Room to be

Room

Vented

Enlarging the ventilation slot

between window and floor.

The air circulation system may take air directly from the outside by means of a pipe with an inner cross section of at least 100 cm2; the opening must not be vulnerable to any type of blockages.

The system can also provide the air needed for combustion indirectly, i.e. from adjacent rooms fitted with air circulation tubes as described above. However, these rooms must not be communal rooms, bedrooms or rooms that may present a fire hazard.

Liquidpetroleumgassinkstothefloorasitisheavierthanair.Therefore, roomscontainingLPGcylindersmustalsobeequippedwithventstoallow gas to escape in the event of a leak.As a result LPG cylinders, whether partially or completely full, must not be installed or stored in rooms or storage areas that are below ground level (cellars, etc.). It is advisable to keep only the cylinder being used in the room, positioned so that it is not subject to heat produced by external sources (ovens, fireplaces, stoves, etc. ) which could raise the temperature of the cylinder above 50°C.

Fitting the appliance

The following precautions must be taken when installing the hob:

Kitchen cabinets adjacent to the appliance and taller than the top of the hob must be at least 600 mm from the edge of the hob.

Hoods must be installed according to their relative installation instruction manualsandataminimumdistanceof650mmfromthehob(seefigure).

Place the wall cabinets adjacent to the hood at a minimum height of 420 mm from the hob (see figure).

 

600mm min.

650mmmin.

420mmmin.

If the hob is installed beneath a wall cabinet, the latter must be situated at a minimum of 700 mm above the hob.

Before the installation remove the grids and burners from the hob and turn it upside down, making sure you don’t damage the thermocouples and spark plugs.

Apply the seals that come with the appliance along the outer edges of the hob to prevent any passage of air, humidity and water (see Figure).

For proper application make sure the surfaces to be sealed are clean, dry and free of any grease/oil.

Theinstallationcavityshouldhavethedimensionsindicatedinthefigure.

Fastening hooks are provided, allowing you to fasten the hob to tops that are between 20 and 40 mm thick. To ensure the hob is securely fastened

to the top, we recommend you use all the hooks provided.

55 mm

475 mm

555 mm

Hook fastening diagram

Hooking position for top H=20mm Hooking position for topH=30mm

Front

Hooking position for top H=40mm Back

! Use the hooks contained in the “accessory pack”.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

4

Wherethehobisnotinstalledoverabuilt-inoven,awoodenpanelmust

Thesocketordouble-poleswitchareeasilyaccessiblewhentheappliance

 

GB

be installed as insulation. This must be placed at a minimum distance of

is installed.

 

20 mm from the lower part of the hob.

 

 

 

! The wires in the mains lead are coloured in accordance with the following

Ventilation

code:

 

 

To ensure adequate ventilation, the back panel of the cabinet must be

 

 

 

removed. It is advisable to install the oven so that it rests on two strips of

Green &Yellow

- Earth

wood, or on a completely flat surface with an opening of at least 45 x 560

Blue

- Neutral

mm (see diagrams).

Brown

- Live

.

45

mm.

mm

 

560

 

 

!The hob can only be installed abovebuilt-inovens with a cooling ventilation system.

Where a hob is installed above an oven without a forced ventilation cooling system, adequate ventilation must be provided inside the cabinet by means of air holes through which air can pass (see figure).

Electrical connection

! THISAPPLIANCE MUSTBE EARTHED.

The hob is designed to work with alternating current, the supply voltage and frequency indicated on the rating plate (situated under the hob). Make sure that the local supply voltage corresponds to the voltage indicated on the rating plate.

Connecting the supply cable to the mains electricity supply

For models supplied without a plug, fit a standard plug suitable for the load indicated on the rating plate, onto a cable and connect to a suitable socket. To connect direct to the mains supply, a double pole switch with a contact separation of at least 3mm suitable for the load and complying with current standards and regulations must be fitted between the appliance and the mains supply outlet.

The green-yellowearth wire must not be interrupted by the switch.

The supply cable must be positioned so that no part of it reaches a temperature of 50°C above room temperature. For installation above a built-underoven, the hob and the oven must be connected separately to the electricity supply, both for safetly reasons and for easy removal of the oven for repair, maintenance etc.

DO NOT use adapters as they could cause overheating or burning.

Before connecting to the power supply, make sure that:

The limiter switch and the domestic system can withstand the load from

The appliance (see rating plate).

Thesupplysystemisefficientlyearthedaccordingtostandardsandlaws in force.

As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

ConnecttheGreen&Yellowwiretoterminalmarked“E”oror coloured Green or Green & Yellow.

ConnecttheBrownwiretotheterminalmarked“L”orcolouredRedorBrown.

Connect the Blue wire to the terminal marked “N” or coloured Black or Blue.

FAILURE TO OBSERVE THE ACCIDENT-PREVENTIONREGULATIONS RELIEVESTHE MANUFACTURER OFALLLIABILITY.

Replacing the cable

Use a rubber cable of the type H05RR-Fwith a suitable cross section 3 x 0.75 mm².

The yellow-greenearth wire must be2-3cm longer than the other wires.

Gas connection

The appliance should be connected to the main gas supply or to a gas cylinder in compliance with current national regulations. Before carrying out the connection, make sure the cooker is compatible with the gas supply you wish to use. If this is not the case, follow the instructions indicated in the paragraph “Adapting to different types of gas.”

When using liquid gas from a cylinder, install a pressure regulator which complies with current national regulations.

!Checkthatthepressureofthegassupplyisconsistentwiththevaluesindicated inTable1(“Burnerandnozzlespecifications”).Thiswillensurethesafeoperation andlongevityofyourappliancewhilemaintainingefficientenergyconsumption.

Connection with a rigid pipe (copper or steel)

! Connection to the gas system must be carried out in such a way as not to place any strain of any kind on the appliance.

There is an adjustable L-shapedpipe fitting on the appliance supply ramp and this is fitted with a seal in order to prevent leaks. The seal must always be replaced after rotating the pipe fitting (seal provided with appliance).The gas supply pipe fitting is a threaded 1/2 gas cylindrical male attachment.

Connecting a flexible jointless stainless steel pipe to a threaded attachment

Thegassupplypipefittingisathreaded1/2gascylindricalmaleattachment.

These pipes must be installed so that they are never longer than 2000 mm when fully extended. Once connection has been carried out, make sure that theflexiblemetalpipedoesnottouchanymovingpartsandisnotcompressed.

! Only use pipes and seals that comply with current national regulations.

Checking the tightness of the connection

! When the installation process is complete, check the pipe fittings for leaks using a soapy solution. Never use a flame.

Adapting to different types of gas

To adapt the hob to a different type of gas other than default type (indicated on the rating plate at the base of the hob or on the packaging), the burner nozzles should be replaced as follows:

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

5

 

1.

Remove the hob grids and slide the burners off their seats.

GB

2.

Unscrew the nozzles using a 7 mm socket spanner, and replace them

 

 

with nozzles for the new type of gas (see table 1 “Burner and nozzle

 

 

 

 

characteristics”).

3.Reassemble the parts following the above procedure in the reverse order.

4.Once this procedure is finished, replace the old rating sticker with one indicating the new type of gas used. Sticker are available from any of our Service Centres.

Replacing the Triple ring burner nozzles

1.Remove the pan supports and lift the burners out of their housing. The burner consists of two separate parts (see pictures).

2.Unscrew the nozzles using a 7 mm socket spanner. Replace the nozzles withmodelsthatareconfiguredforusewiththenewtypeofgas(seeTable

1). The two nozzles have the same hole diameter.

3.Replace all the components by completing the above operations in reverse order.

Adjusting the burners’primary air

Does not require adjusting.

Setting the burners to minimum

1.Turn the tap to the low flame position;

2.Remove the knob and adjust the adjustment screw, which is positioned in or next to the tap pin, until the flame is small but steady.

3.Havingadjustedtheflametotherequiredlowsetting,whiletheburneris alight, quickly change the position of the knob from minimum to maximum and vice versa several times, checking that the flame does not go out.

4.Someapplianceshaveasafetydevice(thermocouple)fitted.Ifthedevice fails to work when the burners are set to the low flame setting, increase this low flame setting using the adjusting screw.

5.Once the adjustment has been made, replace the seals on the by-passesusing sealing wax or a similar substance.

!If the appliance is connected to liquid gas, the regulation screw must be fastened as tightly as possible.

!Once this procedure is finished, replace the old rating sticker with one indicating the new type of gas used. Stickers are available from any of our Service Centres.

!Should the gas pressure used be different (or vary slightly) from the recommended pressure, a suitable pressure regulator must be fitted to the inlet pipe (in order to comply with current national regulations).

DATA PLATE

Electrical

see data plate

connections

This appliance conforms to the following

European Economic Community directives:

-2006/95/EEC dated 12/12/06 (Low Voltage) and subsequent amendments

-2004/108/EEC dated 15/12/04 (Electromagnetic Compatibility) and

subsequent amendments

- 93/68/EEC dated 22/07/93 and subsequent amendments.

- 2009/142/EEC dated 30/11/09 (Gas) and subsequent amendments.

- 2012/19/EC and subsequent amendments.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

6

Burner and nozzle specifications

 

 

 

 

 

 

 

 

 

 

GB

Table 1

 

 

 

Liquid Gas

 

 

 

Natural Gas

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Burner

Diameter

Thermal

Thermal

By-pass

Nozzle

Flow*

Thermal

Nozzle

 

Flow*

 

 

 

power

power

1/100

1/100

(g/h)

 

power

1/100

 

(l/h)

 

 

 

kW

kW

 

 

 

 

 

kW

 

 

 

 

 

 

 

(p.c.s.*)

(p.c.s.*)

 

 

 

 

 

(p.c.s.*)

 

 

 

 

 

 

(mm)

Reduced

Nominal

(mm)

(mm)

***

 

**

Nominal

(mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fast (R)

100

0.70

3.00

39

86

218

 

214

3.00

132 (H)

 

286

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Reduced Fast (RR)

100

0.70

2.60

39

80

189

 

186

2.60

122 (H)

 

248

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Semi Fast (S)

75

0.40

1.65

28

64

120

 

118

1.65

96 (Z)

 

157

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Auxiliary (A)

55

0.40

1.00

28

50

73

 

71

1.00

79 (6)

 

95

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Triple Crown (TC)

130

1.50

3.30

61

65x2

240

 

236

3.60

103x2

 

343

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ultrarapid (UR)

100

0.70

3.40

39

91

247

 

243

3.40

138 (H)

 

324

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Supply pressures

 

Nominal (mbar)

 

28-30

 

37

 

20

 

 

 

 

 

 

Minimum (mbar)

 

20

 

25

 

17

 

 

 

 

 

 

Maximum (mbar)

 

35

 

45

 

25

 

 

 

 

*At 15°C and 1013,25 mbar - dry gas

**Propane P.C.S. = 50.37 MJ/Kg

***Butane P.C.S. = 49.47 MJ/Kg Natural P.C.S. = 37.78 MJ/m³

RR

S

RR

 

S

 

A

A

 

 

R

S

RR

TC

UR

 

 

TC

 

 

 

 

 

 

 

 

A

S

A

 

S

 

S

S

 

GC750X

 

GC751TX

 

 

GC640IX

 

GC640TIX

 

GC751X

 

 

 

 

GC640WH

GCL640TK

 

 

 

 

 

 

GC640BK

GCL641TX

 

 

 

 

 

 

GC641IX

 

GC640TK

 

 

 

 

 

 

GCD641IX

 

 

 

 

 

 

 

GCA641IX

 

 

 

 

 

 

 

GCB641X

 

 

 

 

 

 

 

GCB640X

 

 

 

 

 

 

 

GC641IK

 

 

 

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

7

GB Start-upand use

! The position of the corresponding gas burner is shown on every knob.

Gas burners

Each burner can be adjusted to one of the following settings using the corresponding control knob:

Off

Maximum

Minimum

To light one of the burners, hold a lit match or lighter near the burner and, at the same time, press down and turn the corresponding knob anti-clockwiseto the maximum setting.

Since the burner is fitted with a safety device, the knob should be pressed for approximately 2-3seconds to allow the automatic device keeping the flame alight to heat up.

! Ifaflameisaccidentallyextinguished,turnoffthecontrolknobandwaitfor at least 1 minute before trying to relight it.

To switch off the burner, turn the knob in a clockwise direction until it stops

(when reaches the “●” position).

Practical advice on using the burners

To ensure the burners operate efficiently:

Useappropriatecookwareforeachburner(seetable)sothattheflames do not extend beyond the bottom of the cookware.

Always use cookware with a flat base and a cover.

Whenthecontentsofthepanreachboilingpoint,turntheknobtominimum.

Burner

 

Ø Cookware Diameter (cm)

 

 

 

Fast (R)

 

24 - 26

 

 

 

Reduced Fast (RR)

 

24 - 26

 

 

 

Semi Fast (S)

 

16 - 20

 

 

 

Auxiliary (A)

 

10 - 14

 

 

 

Triple Crown (TC)

 

24 - 26

 

 

 

Pans to be used on 60 cm hobs

 

Burner

 

Ø Cookware Diameter (cm)

 

 

 

Reduced Rapid (RR)

 

24 - 26

Semi-Rapid(S)

 

16 - 20

 

 

 

Auxiliary (A)

 

10 - 14

 

 

 

Triple Crown (TC)

 

24 - 26

 

 

 

Ultra Rapid (UR)

 

24 - 26

 

 

 

Pans to be used on 75 cm hobs

 

To identify the type of burner, refer to the designs in the section entitled, “Burner and Nozzle Specifications”.

Precautions and tips

! This appliance has been designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.

General safety

This is a class 3 built-inappliance.

Gas appliances require regular air exchange to maintain efficient operation. When installing the hob, follow the instructions provided in the paragraph on “Positioning” the appliance.

These instructions are only valid for the countries whose symbols appear in the manual and on the serial number plate.

Theappliancewasdesignedfordomesticuseinsidethehomeandisnot intended for commercial or industrial use.

Theappliancemustnotbeinstalledoutdoors,evenincoveredareas.Itis extremely dangerous to leave the appliance exposed to rain and storms.

Donottouchtheappliancewithbarefeetorwithwetordamphandsand feet.

Theappliancemustbeusedbyadultsonlyforthepreparationoffood, inaccordancewiththeinstructionsoutlinedinthisbooklet.Anyother use of the appliance (e.g. for heating the room) constitutes improper use and is dangerous. The manufacturer may not be held liable for any damage resulting from improper, incorrect and unreasonable use of the appliance.

Ensurethatthepowersupplycablesofotherelectricalappliancesdonot come into contact with the hot parts of the oven.

The openings used for ventilation and dispersion of heat must never be covered.

Alwaysmakesuretheknobsareinthe“”/“” position when the appliance is not in use.

Whenunpluggingtheappliancealwayspulltheplugfromthemainssocket, do not pull on the cable.

Nevercarryoutanycleaningormaintenanceworkwithouthavingdetached the plug from the mains.

Incaseofmalfunction,undernocircumstancesshouldyouattempttorepair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance. Contact a Service Centre (see Assistance).

Alwaysmakesurethatpanhandlesareturnedtowardsthecentreofthe hob in order to avoid accidental burns.

Donotclosetheglasscover(ifpresent)whenthegasburnersorelectric hotplates are still hot.

Donotleavetheelectrichotplateswitchedonwithoutapanplacedonit.

Do not use unstable or deformed pans.

Remove any liquid from the lid before opening it.

The appliance should not be operated by people (including children) with reduced physical, sensory or mental capacities, by inexperienced individuals or by anyone who is not familiar with the product. These individuals should, at the very least, be supervised by someone who assumes responsibility for their safety or receive preliminary instructions relating to the operation of the appliance.

Do not let children play with the appliance.

The appliance is not intended to be operated by means of an external timer or separate remote-controlsystem.

Disposal

Whendisposingofpackagingmaterial:observelocallegislationsothatthe packaging may be reused.

The European Directive 2012/19/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers may take their old appliance to public waste collection

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

8

areas, other communal collection areas, or if national legislation allows return it to a retailer when purchasing a similar new product. All major household appliance manufacturers are active in the creation of systems to manage the collection and disposal of old appliances.

Maintenance and care

Switching the appliance off

Disconnect your appliance from the electricity supply before carrying out any work on it.

Cleaning the appliance

!Do not use abrasive or corrosive detergents such as stain removers, anti-rustproducts, powder detergents or sponges with abrasive surfaces: these may scratch the surface beyond repair.

!Never use steam cleaners or pressure cleaners on the appliance.

It is usually enough to wash the hob with a damp sponge and dry it with absorbent kitchen roll.

The removable parts of the burners should be washed frequently with warm water and soap and any burnt-onsubstances removed.

Forhobswhichligthautomatically,theterminalpartoftheelectronicinstant lighting devices should be cleaned frequently and the gas outlet holes should be checked for blockages.

Stainless steel can be marked by hard water that has been left on the surfaceforalongtime,orbyaggressivedetergentscontainingphosphorus. After cleaning, rinse and dry any remaining drops of water.

Gas tap maintenance

Over time, the taps may become jammed or difficult to turn. If this happens, the tap must be replaced.

! Thisproceduremustbeperformedbyaqualifiedtechnicianauthorised by the manufacturer.

The burner does not remain lit when set to minimum.

GB

Check to make sure that:

The gas holes are not blocked.

There are no draughts near the appliance.

The minimum setting has been adjusted properly.

The cookware is unstable.

Check to make sure that:

The bottom of the cookware is perfectly flat.

The cookware is positioned correctly at the centre of the burner.

The pan support grids have been positioned correctly.

Troubleshooting

It may happen that the appliance does not function properly or at all. Before calling the service centre for assistance, check if anything can be done. First, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas valves for the mains are open.

Theburnerdoesnotlightortheflameisnotevenaroundtheburner.

Check whether:

The gas holes on the burner are clogged.

All the movable parts that make up the burner are mounted correctly.

There are draughts near the appliance.

Theflamediesinmodelswithasafetydevice.

Check to make sure that:

You pressed the knob all the way in.

You keep the knob pressed in long enough to activate the safety device.

The gas holes are not blocked in the area corresponding to the safety device.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

9

GB

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

10

After Sales Service

GB

No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the manufacturer.

Essential Contact Information

Hotpoint Service

We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service.

UK: 08448 224 224

Republic of Ireland: 0818 313 413 www.hotpointservice.co.uk

Please note: Our advisors will require the following information:

Model number:

Serial number:

Parts and Accessories

We supply a full range of genuine replacement parts as well as accessory products that protect and hygienically clean your appliance to keep it looking good and functioning efficiently throughout its life.

UK: 08448 225 225

Republic of Ireland: 0818 313 413 www.hotpointservice.co.uk

Appliance Registration

We want to give you additional benefits of Hotpoint ownership. To activate your free 5 year parts guarantee you must register your appliance with us.

UK: 08448 24 24 24

Republic of Ireland: 01 230 0800 www.hotpointservice.co.uk

Indesit Company UK Ltd. Morley Way, Peterborough, PE2 9JB

Indesit Company Unit 49 Airways Industrial Estate, Dublin 17

Recycling and Disposal Information

As part of Hotpoint’s continued commitment to helping the environment, Hotpoint reserves the right to use quality, recycled components to keep down customer costs and minimise material wastage.

Please dispose of packaging and old appliances carefully. To minimise the risk of injury to children, remove the door, plug, and cut the mains cable off flush with the appliance. Dispose of these parts separately to ensure that the appliance can no longer be plugged into mains socket, and the door cannot be locked shut.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

11

195097584.04

01/2014 - XEROX FABRIANO

GB Guarantee

12 months Parts and Labour Guarantee

Your appliance has the benefit of our manufacturer’s guarantee, which covers the cost of breakdown repairs for twelve months from the date of purchase.

This gives you the reassurance that if, within that time, your appliance is proven to be defective because of either workmanship or materials, we will, at our discretion, either repair or replace the appliance at no cost to you.

This guarantee is subject to the following conditions:

-The appliance has been installed and operated correctly and in accordance with our operating and maintenance instructions.

-The appliance is used only on the electricity or gas supply printed on the rating plate.

-The appliance has been used for normal domestic purposes only.

-The appliance has not been altered, serviced, maintained, dismantled, or otherwise interfered with by any person not authorised by us.

-Any repair work must be undertaken by us or our appointed agent.

-Any parts removed during repair work or any appliance that is replaced become our property.

-The appliance is used in the United Kingdom or Republic of Ireland.

The guarantee does not cover:

-Damage resulting from transportation, improper use, neglect or interference or as a result of improper installation

-Replacement of any consumable item or accessory. These included but not limited to: plugs, cables, batteries, light bulbs, fluorescent tubes and starters, covers and filters.

-Replacement of any removable parts made of glass or plastic.

THIS GUARANTEE WILL NOT APPLY IF THE APPLIANCE HAS BEEN USED IN COMMERCIAL OR NONDOMESTIC PREMISES.

5 Year Parts Guarantee

Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time. To activate the extra parts warranty on your appliance, simply call our registration line on

08448 24 24 24 (Republic of Ireland 01 230 0800)

Extended Guarantees

We offer a selection of protection plans that enable you to fully cover yourself against the expense of repair bills for the life of your policy. To find the ideal plan for you please call our advice line on 08448 226 226 (Republic of

Ireland 01 230 0233).

Free Helpdesk Service

We have a dedicated team who can provide free advice and assistance with your appliance if you experience any technical difficulties within the first 90 days of ownership. Simply call our Hotpoint Service Hotline on 08448 224 224 (Republic of Ireland 0818 313 413) for telephone assistance, or, where necessary, to arrange for an engineer to call.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

12