SERENITY SERIES CUBELET ICE MACHINE
Modular Head Unit
W x D x H
22" x 16
Remote Unit Dimension
35
Installation Dimension*
38” x 29" x 37"
Remote Air-Cooled
1/2
” x 26"
SRC-10J
3/4
” x 23
1/2
” x 22”
SRC-10J
*Dimensions include legs
FS-1022MLJ-C
Shown
FS-1022MLJ-C
08/08/18
Item # 13271
Item #:
Project:
Qty:
AIA#:
Features
Quiet operation - perfect for dining
area
TM
Advanced CleanCycle24
Stainless steel auger with greaseless
bearing
• Up to 889 lbs. of ice production per 24 hours
• Durable stainless steel exterior
• EverCheckTM alert system
• Less heat in the kitchen
• Minimized noise
• 2 second flush cycle every hour
• Flush cycle removes sediment for cleaner ice
• Slim depth - easier to clean dispenser
• Front and back serviceability
• 8 ft. power cord with NEMA 5-15P plug
• R-404A Refrigerant
design
ICE PRODUCTION
Air / Water Temp
Condenser
Remote
Condenser
Remote
†
Line sets require refrigerant. Refer to instruction manual for installation and electrical requirements. See instruction manual for wiring diagram.
Model
SRC-10J
Model
FS-1022MLJ-C
LINE SETS - Brazing Required
25’ Length
†
HS-5299
Cubelet Cube Dimensions*
Lbs. per 24 hours
70°/ 50°F 90°/ 70°F
889
35’ Length
HS-5300† HS-5301
55’ Length
Operating Limits
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 104-127V/187-253V*
730
TEMP RANGE
†
Service
• Allow 6” (15 cm) clearance at rear, sides, and top for
proper air circulation and ease of maintenance/service.
• Allow 24” (61 cm) clearance on left side for removal of
cube guides
Printed in the U.S.A.
© HOSHIZAKI AMERICA, INC.
* approximate size in inches, image not to scale
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
• Panels easily removed and all components accessible
for service.
WATER USAGE ELECTRICAL
Potable
Gal. per 100 lbs.
90°/ 70°F 90°/ 70°F
12.0 N/A 3.5 oz. 110/150
Ambient
(Outdoor Use)
-20° - 122°
FS-1022MLJ-C
Condenser
Gal. per 100 lbs.
Voltage
Range
187-253VAC
FS-1022MLJ-C
* Voltage supply for FS Ice Maker is
supplied from the SRC Remote Condenser
kWh Used
per 100 lbs.
Min. Circuit
Amp - Max.
Fuse/Breaker
20A
90°/ 70°F
Warranty:
3 Year Parts & Labor on entire machine. 5 Year Parts on Compressor; air-cooled
condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories.
Contact factory for warranty in other countries.
Shipping: (LxWxH)
Amperage
5.10
ELECTRICAL
Amperage
9.3A
27” x 24.5” X 32” 12.25ft
Voltage
115V/60/1*
3.1A
Voltage
Plumbing
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe
or Equivalent
Service-
• Allow 24” (61 cm) clearance in both front and rear for proper
air circulation and ease of maintenance/service.
• For best performance the Remote Condenser should not be
more than 33 feet above the icemaker or no more than 10 feet
below it. These distances are measure from fitting to fitting.
(including ground)
See remote
condenser
Circuit
Wires
(including ground)
4
FS-1022MLJ-C
SRC-10J
Hoshizaki reserves the right to change specifications without notice.
Circuit
Wires
Volume:
Charge Amount
* Voltage supply for FS Ice Maker is
supplied from the SRC Remote Condenser
Heat
Rejection
BTU/hr.
9,800208-230V/60/1
3
Refrigerant
Refrigerant
Charge Amount
15 lb. 14 oz.
Net / Ship
Weight (lbs.)
Net / Ship
Weight (lbs.)
225 /270
Power cord included.
SERENITY SERIES CUBELET ICE MACHINE
REMOTE AIR-COOLED
FS-1022MLJ-C
08/08/18
Item # 13271
mm
[inches]
Front
REMOTE AIR-COOLED
REMOTE AIR-COOLED
Front
SRC-10J Remote Condenser (Sold Separately)
3/4
35
1/2
” x 23
” x 37” (W x D x H with legs)
For Use with FS-1022MLJ-C
BOTTOM VIEW REAR VIEW SIDE VIEW FRONT VIEW
REMOTE AIR-COOLED
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
Suction Line
Liquid line
Brazed Line Sets
(Sold Separately)
25’ HS-5299
35’ HS-5300
55’ HS-5301
Voltage supply for the FS Ice Maker
is supplied from the SRC Remote Condenser.
23.5”
35.75”
22”
37”
Electrical
supply hole
Wire harness
connection
38”
29”
Printed in the U.S.A.