Hoshizaki DCM500BAH Specsheet

DCM-500B_H

W x D x H

TM

26" x 22

SD-450

1/4

26

" x 22" x 32

SANITARY CUBELET ICE MACHINE/DISPENSER

1/2

" x 40”

1/2

”

DCM-500B_H

3/31/17

Item # 13226

Item #:

Project:

Qty:

AIA#:

Features

Durable stainless steel exterior

SD-500

9/10

25

" x 22" x 32

DCM-500BAH

Air-Cooled

Shown with optional

SD-500 Stand

DCM-500BWH

Water-Cooled

3/4

”

Stainless steel auger with greaseless
bearing

• Up to 618 lbs. of ice production per 24 hours, with
40 lbs.* built-in storage

• Every 12 hours, unit performs 20 minute purge to rid
itself of impurities

• Corrosion resistant stainless steel exterior

• Easy to chew, cubelet ice

• Self-contained design reduces oppportunities for
cross contamination

• Protected by H-GUARD Plus
Antimicrobial Agent

• Dispenses ice and water

• R-404A Refrigerant

Warranty:

3 Year Parts & Labor on entire machine.
5 Year Parts on Compressor; air-cooled condenser coil.
Valid in United States, Canada, Puerto Rico and U.S. Territories. Contact factory for
warranty in other countries.

*Rated in accordance with AHRI Standard 820 (I-P)

CleanCycle12 design

ICE PRODUCTION

Condenser

Air-Cooled

Water-Cooled

Model

DCM-500BAH

DCM-500BWH

Air / Water Temp

Lbs. per 24 hours

70°/ 50°F 90°/ 70°F

618

590

Cubelet Dimensions*

450

512

Type of Ice

(Hardness Rating)

Cubelet (88)

Cubelet (88)

Operating Limits

• Ambient Temp Range 45 - 100°F

• Water Temp Range 45 - 90°F

• Water Pressure 10 - 113 PSIG

• Voltage Range 104 - 127V

Service

• Allow 6” (15 cm) clearance at rear and sides for
proper air circulation and ease of maintenance/
service should they be required. Allow 24” (61 cm)

Printed in the U.S.A.

© HOSHIZAKI AMERICA, INC.

* approximate size in inches, image not to scale

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com

clearance at top to allow for removal of the auger.

WATER USAGE

Potable

Gal. per 100 lbs.

90°/ 70°F 90°/ 70°F

12.0 N/A 20A 7,000 253 lbs.115V/60/1

12.0 112 20A 6,000 253 lbs.115V/60/1

Condenser

Gal. per 100 lbs.

kWh Used

per 100 lbs.

90°/ 70°F

5.62

4.48

ELECTRICAL

Max. Fuse Size

or HACR

Circuit Breaker

Amperage

12.9A

12.6A

Plumbing

• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent

• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe or
Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)

• Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent

• Condenser Drain/Return Line: Minimum 1/4” Nominal ID Hard
Pipe (open drain system) or Copper Water Tubing (closed loop
system) or Equivalent

Hoshizaki reserves the right to change specifications without notice.

Voltage

Heat

Rejection

BTU/hr.

Shipping

Weight

ENERGY

STAR

®

DCM-500B_H

SANITARY CUBELET ICE MACHINE/DISPENSER

DCM-500B_H

03/31/17

Item # 13226

inch

[mm]

Front

AIR-COOLED

AIR-COOLED

WATER-COOLED

Front

WATER-COOLED

REAR VIEW SIDE VIEW FRONT VIEW

AIR-COOLED

TOP VIEW

Front Front

AIR-COOLED

© HOSHIZAKI AMERICA, INC.

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com

WATER-COOLED

WATER-COOLED

Printed in the U.S.A.