Hoshizaki DB-130H User Manual

Hoshizaki America, Inc.

Hoshizaki

Ice Dispensing Bin

Models
DB-130H

“A Superior Degree

of Reliability”

www.hoshizaki.com

INSTRUCTION MANUAL

®

Issued: 6-5-2001
Revised: 12-10-2003

IMPORTANTIMPORTANT

IMPORTANT

IMPORTANTIMPORTANT

Only qualified service technicians should attempt to install, service or maintain this
ice dispenser. No installation, service or maintenance should be undertaken until the
technician has thoroughly read this Instruction Manual. Likewise, the owner/
manager should not proceed to operate the ice dispenser until the installer has
instructed them on its proper operation.

HOSHIZAKI provides this manual primarily to assist qualified service technicians in the
installation, maintenance and service of the ice dispenser.

Should the reader have any questions or concerns which have not been satisfactorily
addressed, please call or write to the HOSHIZAKI Technical Support Department for
assistance.

HOSHIZAKI AMERICA, INC.
618 Highway 74 South
Peachtree City , GA 30269

Attn: HOSHIZAKI T echnical Support Dep artment

Phone: [phone] T echnical Service

[phone]

Fax: [phone]

NOTE: T o expedite assistance, all correspondence/communication MUST include the following

information:

• Model Number

• Serial Number

• Complete and detailed explanation of the problem

2

• Please review this manual. It should be read carefully before the ice dispenser is
installed and operated. Only qualified service technicians should install, service and
maintain the ice dispenser. This manual should be made available to the technician
prior to installation, maintenance or service.

• Keep this manual with the dispenser for later reference.

CONTENTSCONTENTS

CONTENTS

CONTENTSCONTENTS

PAGE

I. SPECIFICATIONS .................................................................................................... 4

1. NAMEPLATE RATING ........................................................................................... 4

2. DIMENSIONS/CONNECTIONS .............................................................................. 5

II. INSTALLATION AND OPERATING INSTRUCTIONS............................................. 6

1. CHECKS BEFORE INSTALLATION ...................................................................... 6

2. LOCATION.............................................................................................................. 7

3. SET UP ................................................................................................................... 8

4. ELECTRICAL CONNECTION .............................................................................. 10

5. DRAIN CONNECTIONS ....................................................................................... 11

6. FINAL CHECK LIST .............................................................................................. 11

7. START UP ............................................................................................................ 13

8. PREPARING THE ICE DISPENSING BIN FOR LONG STORAGE ..................... 1 3

III. CLEANING AND MAINTENANCE INSTRUCTIONS............................................ 14

1. CLEANING INSTRUCTIONS ............................................................................... 14

[a] CLEANING PROCEDURE .............................................................................. 14

[b] SANITIZING PROCEDURE............................................................................. 16

2. MAINTENANCE .................................................................................................... 16

3

I. SPECIFICATIONSI. SPECIFICATIONS

I. SPECIFICATIONS

I. SPECIFICATIONSI. SPECIFICATIONS

1. NAMEPLATE RATING1. NAMEPLATE RATING

1. NAMEPLATE RATING

1. NAMEPLATE RATING1. NAMEPLATE RATING

See NAMEPLATE for electrical specifications. The nameplate
is located on the upper part of the right side panel.

We reserve the right to make changes in specifications and design without prior notice.

4

2. DIMENSIONS/CONNECTIONS2. DIMENSIONS/CONNECTIONS

2. DIMENSIONS/CONNECTIONS

2. DIMENSIONS/CONNECTIONS2. DIMENSIONS/CONNECTIONS

5

II. INSTALLATION AND OPERATING INSTRUCTIONSII. INSTALLATION AND OPERATING INSTRUCTIONS

II. INSTALLATION AND OPERATING INSTRUCTIONS

II. INSTALLATION AND OPERATING INSTRUCTIONSII. INSTALLATION AND OPERATING INSTRUCTIONS

1. CHECKS BEFORE INSTALLATION1. CHECKS BEFORE INSTALLATION

1. CHECKS BEFORE INSTALLATION

1. CHECKS BEFORE INSTALLATION1. CHECKS BEFORE INSTALLATION
IMPORTANTIMPORTANT

IMPORTANT

IMPORTANTIMPORTANT

1. This ice dispensing bin is designed and intended to be used in combination
with a Hoshizaki Modular Crescent Ice Cuber, Models KM-280M,
KM-500M, or KM-630M.
It cannot be recommended to use this ice dispensing bin in combination
with any cuber or flaker other than a Hoshizaki Modular Crescent Ice
Cuber.

2. Remove shipping carton, tape(s) and packing to prevent damage to the ice
dispensing bin.

3. Ensure all components, fasteners and thumbscrews are securely in place.

1) Remove the Front panel to prevent damage before installing.

2) Remove the package containing the accessories.

3) Remove the protective plastic film from the Side Panels. If the ice dispensing bin has

been exposed to the sunlight or to direct heat, it should be allowed to cool before

removing the protective film.

4) See the Nameplate, located on the upper part of the Right Side Panel. Check that

the voltage supplied corresponds with the voltage specified on the Nameplate.

6