Hoshizaki CRES98 Specifications
CRES98
Commercial Series
Low-Profile Refrigerated Equipment Stand
W x D x H
98” x 33.25” x 26”*
*to work surface with 4” casters
CRES98
02/10/16
Item # 13383
Item #:
Project:
Qty:
AIA#:
Features
Dimensions / Capacity
Overall Width x Depth
Height To Work Surface
Depth with Drawer Fully Open (including 1.5" rear bumper)
Pan Capacity (12" x 20")
Maximum Pan Depth
Maximum Load Capacity
Crated Shipping Weight
Crated Height x Width x Depth
(including 4" casters)
Electrical / Refrigeration
Voltage
HACR Breaker
Electrical Connection
Voltage Range
Ambient Temp. Range
Control Setpoint Range
Amperage
Energy Consumption
Heat Rejection (BTU/Hr.) @NSF
Approx. Nominal Compres. BTU/HR (HP)
Refrigerant / Charge Amount (g) (oz)
(NEMA)
(kWh/day) @NSF
Options
HS-4007 - Drawer divider bars
HS-5180 - Condenser Filter
Printed in the U.S.A.
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
Model CRES98
*
Two Section
CRES98
98" x 33.25"
26"
55.75"
12
6"
1500 lbs
646 lbs
28.75" x 100" x 34.50"
Two Section
CRES98
115/60/1
15.0 Amps
5-15P
104-126
45° to 100°F
28° to 45°F
4.3
3.8
535
1386 (1/5HP)
R-134a / (242g) (8.5 oz)
Warranty
3 Year - parts and Labor on
*
entire machine.
5 Year - Parts on Compressor
Valid in United States, Canada, Puerto
Rico and U.S. Territories. Contact
factory for warranty in other countries.
Heavy duty 16 gauge stainless steel top
with marine edge (front/rear), drip
edge (sides)
Ceramic heat shield integral to top
protects food from high heat
1500 pound capacity provides sturdy
base for cooking equipment
• Stainless steel exterior front, sides and top
• Anodized aluminum interior sides and back with
stainless steel interior floor
• Solid state digital controller with temperature alarms
and LED display (Fahrenheit or Celsius)
• Cabinet and drawers are insulated with 2” CFC free
foamed in place polyurethane
• Stainless steel exterior drawer with stainless steel
interior
• Drawer slides are constructed of 14 gauge stainless
steel with acetal rollers and drawer stops
• Drawers will accommodate (3) 12” x 20” x 6” deep
pans (pans by others)
• Drawer frames are formed of 14 gauge stainless steel
and securely fastened to cabinet
• Drawers are equipped with finger cut-outs for easy
removal of pans
• Extruded aluminum flush mount drawer handles
• Magnetic drawer gasket is easily removable for
cleaning
• Removable stainless steel end panel for access to
refrigeration system
• Enamel coated evaporator coil
• Energy efficient automatic hot gas condensate
evaporator
• Standard with (8) 4" casters all with brakes
• 8 ft. cord and plug
Hoshizaki reserves the right to change specifications without notice.
Cabinet Construction
Drawer Construction
Refrigeration System
CRES98
Commercial Series
Low-Profile Refrigerated Equipment Stand
CRES98
02/10/16
Item # 13383
FRONT VIEW
PLAN VIEW
98”
98”
33.25”
4”
55.75”
1”
26”
SIDE VIEW
54.25”
31.75”
20.25”
CLEARANCE
• Top: A minimum of 4” (11cm) clearance is required
between the bottom of the cooking equipment heating
element and the appliance top
• Sides: 1” (25mm) clearance
• Rear: The factory installed rear bumpers must be in
place to ensure proper rear clearance.
1.5”
27”
16 gauge stainless steel
top with 1” drip edge
The exterior cabinet front, sides, and top are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior
walls and ceiling are anodized aluminum. The floor is constructed of heavy gauge stainless steel with coved corner construction. Heavy duty ABS thermal breaks are used
to reduce heat transfer in the frames. Cabinet walls and drawers are insulated with 2" of environmentally friendly R-134a, CFC free, foamed in place polyurethane. 4" heavy
duty platform casters (all with brakes) are standard and installed at the factory.
Drawer fronts are constructed of high grade stainless steel with stainless steel interior and are insulated with R-134a CFC free foamed in place polyurethane. Each drawer
accommodates (3) 12” X 20” X 6” deep pans (pans by others). (Drawers will also accept 1/6th, 1/3rd, and 1/2 size pans with optional adapter bars). Drawer module frames
are formed of 14 gauge stainless steel all welded construction and securely fastened in the cabinet. The drawer slides are constructed of heavy duty 14 gauge stainless steel
with durable acetal rollers with stainless steel ball bearings to prevent metal to metal contact. The drawer slides have been life tested (fully loaded) three hundred thousand
cycles without showing significant wear. The flush mount handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable and easily removed
for cleaning.
Solid state digital controller with temperature alarms maintains optimum cabinet temperature. A LED display shows the cabinet temperature and is adjustable to Fahrenheit
or Celsius. The CRES98 has a front breathing refrigeration system. The high efficiency refrigeration system is standard with an enamel coated evaporator for extended life.
Condensate removal is accomplished with an energy efficient hot gas condensate evaporator system. A capillary tube controls the flow of environmentally friendly R-134a
refrigerant through the evaporator. Refrigeration system utilizes a heated defrost to eliminate any ice on the evaporator coil. 115 volt units are equipped with an eight foot
cord and plug (20.0 amps or less).
© HOSHIZAKI AMERICA, INC.
Printed in the U.S.A.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
Loading...