Hoshizaki CR49A Specifications

CR49A

49” Low-Profile Refrigerated Chef Base

W x D x H

49” x 32.25” x 26”*

*to work surface with 4” casters

CR49A

12/17/18

Item # 13488

Item #:

Item #:

Project:

Project:

Qty:

Qty:

AIA#:

AIA#:

Features

Heavy duty 16 gauge stainless steel top
with marine edge (front/rear), drip
edge (sides)

Ceramic heat shield integral to top
protects food from high heat

700 pound capacity provides sturdy
base for cooking equipment

Dimensions / Capacity

Interior Storage Capacity (CF)
Interior Storage Capacity (CF) (AHAM)
Overall Width x Depth
Overall Height (including 4” casters)
Height To Work Surface (including 4” casters)
Depth with Drawer Fully Open (including 1” bumper)
Drawer Opening Width
Pan Capacity
Maximum Pan Depth
Maximum Load Capacity
Crated Shipping Weight
Crated Length x Width x Height

Electrical / Refrigeration

Voltage
HACR Breaker
Electrical Connection
Voltage Range
Ambient Temp. Range
Control Setpoint Range
Amperage
Energy Consumption
Heat Rejection (BTU/Hr.) @NSF
Approx. Nominal Compres. BTU/HR (HP)
Refrigerant / Charge Amount (oz)

(12” x 20”) per drawer

(including 1” bumper)

(NEMA)

(kWh/day) @NSF

Options

HS-4007 - Drawer divider bars
HS-5180 - Condenser Filter

© HOSHIZAKI AMERICA, INC.

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com

One-Section CR49A

3

10.60 ft

3

9.52 ft
49” x 33.25”
27”
26”

55.75”

36.75”
2

total / 2.5 per drawer

6”
700 lbs.
339 lbs.
51” x 34.5” x 30.5”

One-Section CR49A

115/60/1

15.0 Amps
5-15P
104-126
45° to 100°F
32° to 52°F

2.7

2.1
303
1354(1/5HP)
R290(3.5 oz)

3 Year - parts and Labor on

*

5 Year - Parts on Compressor

Valid in United States, Canada, Puerto

Rico and U.S. Territories. Contact

factory for warranty in other countries.

Warranty

entire machine.

• Environmentally friendly R290 hydrocarbon refrigerant

*

• Stainless steel exterior front, sides and top

• Stainless steel interior sides and back with stainless
steel interior floor

• Solid state digital controller with temperature alarms
and LED display (Fahrenheit or Celsius)

• Cabinet and drawers are insulated with 2” CFC free
foamed in place polyurethane

• Stainless steel exterior drawer with stainless steel
interior

• Drawer module frames, acetal rollers, and drawer stops
are formed of heavy duty stainless steel all welded
construction and securely fastened in the cabinet

• Drawers will accommodate (2) 12” x 20” x 6” deep
pans and (2) 1/2 long pan 6” deep (pans by others)

• Drawers are equipped with finger cut-outs for easy
removal of pans

• Extruded aluminum flush mount drawer handles

• Magnetic drawer gasket is easily removable for
cleaning

• Removable stainless steel end panel for access to
refrigeration system

• E-coated evaporator coil

• Energy efficient automatic hot gas condensate
evaporator

• Standard with (6) 4" casters all with brakes

• 10 ft. cord and plug

Hoshizaki reserves the right to change specifications without notice.

CR49A

49” Low-Profile Refrigerated Chef Base

CR49A

12/17/18

Item # 13488

FRONT VIEW

PLAN VIEW

49”

49”

33.25”

4”

55.75”

26”

SIDE VIEW

54.75”

1”

20.25”

32.25”

1”

27”

CLEARANCES

• Top: A minimum of 4” (11cm) clearance is required

between the bottom of the cooking equipment heating
element and the appliance top

• Sides: 1” (25mm) clearance

• Rear: The factory installed rear bumpers must be in

place to ensure proper rear clearance.

16 gauge stainless steel
top with built in heat shield
and 1” drip edge

Cabinet Construction

The exterior cabinet front, sides, and top are constructed of high quality stainless steel. The exterior back and bottom are constructed of coated steel. The cabinet interior
walls and ceiling are stainless steel. The floor is constructed of heavy gauge stainless steel with coved corner construction. Heavy duty ABS thermal breaks are used to
reduce heat transfer in the frames. Cabinet walls and drawers are insulated with 2” of environmentally friendly CFC free, foamed in place polyurethane. 4” heavy duty
platform casters (all with brakes) are standard and installed at the factory.

Drawer Construction

Drawer fronts are constructed of high grade stainless steel with stainless steel interior and are insulated with CFC free, foamed in place polyurethane. Each drawer
accommodates (1) 12” X 20” X 6” deep pans and (2) 1/2 size long pan (pans by others). (Drawers will also accept 1/2, 1/3
Drawer module frames are formed of heavy duty stainless steel all welded construction and securely fastened in the cabinet. The drawer slides are constructed of heavy
duty stainless steel with durable acetal rollers with stainless steel ball bearings to prevent metal to metal contact. The drawer slides have been life tested (fully loaded) three
hundred thousand cycles without showing significant wear. The flush mount handles are constructed of extruded aluminum. Snap-in magnetic drawer gaskets are durable
and easily removed for cleaning.

Refrigeration System

Solid state digital controller with temperature alarms maintains optimum cabinet temperature. A LED display shows the cabinet temperature and is adjustable to Fahrenheit
or Celsius. The CR49A has a front breathing refrigeration system. The high efficiency refrigeration system is standard with an E-coated evaporator for extended life.
Condensate removal is accomplished with an energy efficient hot gas condensate evaporator system. A capillary tube controls the flow of environmentally friendly R290
refrigerant through the evaporator. Refrigeration system utilizes an automatic, time-initiated, heated defrost to eliminate any ice on the evaporator coil. 115 volt units are
equipped with a ten foot cord and plug (20.0 amps or less).

rd

and 1/6th size pans with optional adapter bars).

© HOSHIZAKI AMERICA, INC.

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com