Hoshizaki CR1SHSL, CR2SHS, CR3SHS, CF1SFSL, CF1SHSL User Manual

Instruction Manual

Commercial Series

Refrigerated Kitchen Equipment

Models

Reach-In S-Series

					hoshizakiamerica.com	Issued: 5-17-2016

WARNING

Only qualified service technicians should install and service the appliance. To obtain the name and phone number of your local Hoshizaki Certified Service

Representative, visit www.hoshizaki.com. No installation or service should be undertaken until the technician has thoroughly read this Instruction Manual. Likewise, the owner/manager should not proceed to operate the appliance until the installer has instructed them on its proper operation. Failure to install, operate, and maintain the appliance in accordance with this manual may adversely affect safety, performance, component life, and warranty coverage. Proper installation is the responsibility of the installer. Product failure or property damage due to improper installation is not covered under warranty.

Hoshizaki provides this manual primarily to assist qualified service technicians in the installation, maintenance, and service of the appliance.

Should the reader have any questions or concerns which have not been satisfactorily addressed, please call, send an e-mail message, or write to the Hoshizaki Technical Support Department for assistance.

Phone: [phone]

Fax: [phone]

E-mail: [e-mail]

HOSHIZAKI AMERICA, INC.

618 Highway 74 South

Peachtree City, GA 30269

Attn: Hoshizaki Technical Support Department

Web Site: www.hoshizaki.com

NOTE: To expedite assistance, all correspondence/communication MUST include the following information:

•Model Number

•Serial Number

•Complete and detailed explanation of the problem.

2

IMPORTANT
This manual should be read carefully before the appliance is installed and
operated. Read the warnings and guidelines contained in this booklet carefully as
they provide essential information for the continued safe use and maintenance of
the appliance. Retain this booklet for any further reference that may be necessary.
CONTENTS
Important Safety Information..................................................................................................	4
I. Installation Instructions........................................................................................................	7
A. Location.........................................................................................................................	7
B. Checks Before Installation.............................................................................................	7
C. Setup.............................................................................................................................	8
D. Door Reversal................................................................................................................	9
E. Unit Leveling..................................................................................................................	9
F. Electrical Connection....................................................................................................	10
G. Final Checklist..............................................................................................................	11
II. Operating Instructions......................................................................................................	12
A. Important Notes About Usage ....................................................................................	12
B. Startup.........................................................................................................................	13
C. Controls and Adjustments............................................................................................	14
1. Temperature Display...............................................................................................	14
2. Adjusting the Temperature Setpoint........................................................................	14
3. Changing the Temperature Display Scale (°F or °C)..............................................	15
4. Light Switch for Glass Door Models.......................................................................	15
D. Control Module Icons...................................................................................................	15
E. Defrost.........................................................................................................................	16
F. Food Storage................................................................................................................	16
G. Alarm Safeties.............................................................................................................	17
H. Safety Devices.............................................................................................................	18
I. Cooling Performance.....................................................................................................	18
J. Cabinet Condensation..................................................................................................	18
III. Cleaning and Maintenance Instructions..........................................................................	19
A. Cleaning.......................................................................................................................	19
1. Exterior...................................................................................................................	19
2. Cabinet Interior.......................................................................................................	19
3. Door Gaskets.........................................................................................................	19
4. Shelves...................................................................................................................	19
5. Glass Door.............................................................................................................	19
B. Maintenance/Troubleshooting......................................................................................	20
1. Condenser..............................................................................................................	20
2. Condensate Drain Boot..........................................................................................	20
3. Power Supply Connection......................................................................................	21
IV. Preparing the Appliance for Periods of Non-Use.............................................................	22
V. Disposal............................................................................................................................	23

3

Important Safety Information

Throughout this manual, notices appear to bring your attention to situations which could result in death, serious injury, damage to the appliance, or damage to property.

,
WARNING	Indicates a hazardous situation which could result in death or
	serious injury.
NOTICE	Indicates a situation which could result in damage to the
	appliance or property.
IMPORTANT	Indicates important information about the use and care of the
	appliance.

WARNING

This appliance should be destined only to the use for which it has been expressly conceived. Any other use should be considered improper and therefore dangerous.

The manufacturer cannot be held responsible for injury or damage resulting from improper, incorrect, and unreasonable use. Failure to install, operate, and

maintain the appliance in accordance with this manual will adversely affect safety, performance, component life, and warranty coverage.

To reduce the risk of death, electric shock, serious injury, or fire, follow basic precautions including the following:

•Only qualified service technicians should install and service this appliance.

•This appliance must be installed in accordance with applicable national, state, and local codes and regulations.

•To reduce the risk of electric shock, do not touch the power switch or plug with damp hands.

•Make sure the power switch is in the "OFF" position before plugging in or unplugging the appliance to reduce the risk of electric shock.

•Before servicing, move the power switch to the "OFF" position. Unplug the appliance from the electrical outlet.

•This appliance requires an independent power supply of proper capacity. See

the nameplate for electrical specifications. Failure to use an independent power supply of proper capacity can result in a tripped breaker, blown fuse, damage to existing wiring, or component failure. This could lead to heat generation or fire.

•115VAC Models: THIS APPLIANCE MUST BE GROUNDED: This appliance is equipped with a NEMA 5-15 three prong grounding plug to reduce the risk of potential shock hazards. It must be plugged into a properly grounded,

independent 3-prong wall outlet. If the outlet is a 2-prong outlet, it is your personal responsibility to have a qualified electrician replace it with a properly grounded, independent 3-prong wall outlet. Do not remove the ground prong from the plug and do not use an adapter plug. Failure to follow these instructions may result in death, electric shock, or fire.

4

WARNING, continued

•208-230VAC Models: THIS APPLIANCE MUST BE GROUNDED: This appliance is equipped with a NEMA L14-20 four-prong locking, grounding plug to reduce the risk of potential shock hazards. It must be plugged into a properly grounded, independent 4-prong wall outlet. If the outlet is a 3-prong outlet or a 4-prong non locking outlet, it is your personal responsibility to have a qualified electrician replace it with a properly grounded, independent 4-prong locking wall outlet. Do not remove the ground prong from the plug and do not use an adapter plug. After plugging in, twist the plug clockwise to lock it into place. Failure to follow these instructions may result in death, electric shock, or fire.

•Do not use an extension cord.

•Do not use an appliance with a damaged power cord. The power cord should not be altered, jerked, bundled, weighed down, pinched, or tangled. Such actions could result in electric shock or fire. To unplug the appliance, be sure to pull the plug, not the cord, and do not jerk the cord. Before unplugging a 4-prong plug, rotate the plug counter-clockwise to unlock it.

•The GREEN ground wire in the factory-installed power cord is connected to the appliance. If it becomes necessary to remove or replace the power cord, be sure to connect the power cord's ground wire.

•Do not splash, pour, or spray water directly onto or into the appliance. This might cause short circuit, electric shock, corrosion, or failure.

•Do not make any alterations to the appliance. Alterations could result in electric shock, injury, fire, or damage to the appliance.

•This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

•Children should be properly supervised around this appliance.

•Do not climb, stand, or hang on the appliance or door or allow children or animals to do so. Do not climb into the appliance or allow children or animals to do so. Death or serious injury could occur or the appliance could be damaged.

•Be careful not to pinch fingers when opening and closing the doors. Be careful when opening and closing the doors when children are in the area.

•Open and close the doors with care. Doors opened too quickly or forcefully may cause injury or damage to the appliance or surrounding equipment.

•Do not use combustible spray or place volatile or flammable substances in or near the appliance. They might catch fire.

•Keep the area around the appliance clean. Dirt, dust, or insects in the appliance could cause harm to individuals or damage to the equipment.

•Do not throw anything onto the shelves or load any single shelf with more than

120 lb. (54.5 kg) of product. They might fall off and cause injury.

•Do not place anything on top of the appliance. Foreign objects or moisture could enter the appliance and result in electric shock or fire.

5

WARNING, continued

•This appliance is designed only for storage of food. Employ sanitary methods. Use for any other purposes (for example, storage of chemicals or medical supplies such as vaccine and serum) could cause deterioration of stored items.

•Do not block the cabinet air inlet or outlet, otherwise cooling performance may be reduced.

•Do not tightly pack the cabinet. Allow some space between items to ensure good air flow. Also allow space between items and interior surfaces.

•Do not place any product on the floor of the cabinet. All product must be placed on properly installed shelves.

•Do not put warm or hot foods in the cabinet. Let them cool first, or they will raise the cabinet temperature and could deteriorate other foods in the cabinet or overload the appliance.

•All foods should be wrapped in plastic film or stored in sealed containers. Otherwise foods may dry up, pass their smells onto other foods, cause frost to develop, result in poor appliance performance, or increase the likelihood of cross contamination.

Certain dressings and food ingredients, if not stored in sealed containers, may accelerate corrosion of the evaporator, resulting in failure.

•Do not store items near the air outlet. They might freeze up and crack or break causing a risk of injury or contamination of other food.

•To maintain proper product temperature on glass door models, allow at least 5"

(13 cm) of space between items and LED light strips when lights are in use.

NOTICE

•Protect the floor when moving the appliance to prevent damage to the floor.

•Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction. Do not place anything on top of the appliance. Blockage of airflow could negatively affect performance and damage the appliance.

•To prevent deformation or cracks, do not spray insecticide onto the plastic parts or let them come into contact with oil.

•To avoid damage to the gasket, use only the door handle when opening and closing.

6

I. Installation Instructions

WARNING

•This appliance must be installed in accordance with all applicable national, state, and local regulations.

•Appliance is heavy. Use care when lifting or positioning. Work in pairs when needed to prevent injury or damage.

•Do not tilt the appliance more than 45°.

A.Location

WARNING

•This appliance is not intended for outdoor use.

•Normal operating ambient temperature:

–Refrigerators and Solid Door Freezers 45°F to 100°F (7°C to 38°C)

–Glass Door Freezers 45°F to 80°F (7°C to 27°C)

Operation of the appliance, for extended periods, outside of this normal temperature range may affect appliance performance.

For best operating results:

•The appliance should not be located next to ovens, grills, or other high heat producing equipment.

•The location should provide a firm and level foundation for the appliance.

•The appliance should not be located in a corrosive environment.

•Minimum Clearance:

Side	Top	Rear
3" (8 cm)	12" (31 cm)	1" (3 cm)
B. Checks Before Installation
		WARNING
Refer to the nameplate for electrical specifications. The nameplate is located on
the right side wall of the cabinet interior. For more electrical connection details, see
"I.F. Electrical Connection." We reserve the right to make specification and design
changes without prior notice.
		Nameplate

7

•Visually inspect the exterior of the shipping package and immediately report any damage to the carrier. Upon opening the package, any concealed damage should also be immediately reported to the carrier.

•Remove the shipping carton, tape, and packing material. Remove the protective plastic film from the exterior panels on all models and from the interior door panels on solid door models. If the appliance is exposed to the sun or to heat, remove the film after the appliance cools.

•Remove all accessory containers before discarding the packing materials. Dispose of all packing materials in a proper and environmentally responsible manner.

•Check for missing or damaged accessories.

C. Setup

1. Remove the Appliance from the Pallet and Install the Casters

1)Move as close to the final location as possible.

2)Remove the 2 bolts securing the unit to the pallet, then remove the unit from the pallet. Block the unit securely at a height of

8" (20 cm) off the floor. Do not lay the unit down. NOTICE! Do not allow the door(s) to bear the weight of the appliance.

3)Attach the casters to the bottom of the unit. Locking casters should be attached to the front of the unit. See Fig. 1.

4)While supporting the appliance to keep it from tipping, lower the casters to the floor.

Door

Locking Casters in Front

Fig. 1

2.Check the Refrigeration Circuit

•Visually check that the refrigerant lines do not rub or touch other lines or surfaces and that the condenser fan blade turns freely.

•Check that the compressor is snug on all mounting pads.

3.Position the Appliance and Lock the Front Casters

The front casters on the appliance are lockable. After positioning the appliance in its final location, lock the front casters.

4. Install the Shelves

Shelf support clips are provided in the accessory pack.

1.Place the shelf support clips into the pilasters (4 shelf support clips per shelf). Indexing holes are provided on the pilasters in evenly spaced intervals to assist you in positioning the support clips at the same height. See Fig. 2.

2.Place the shelves in position on the shelf support clips.

Indexing

Holes

Pilaster

Shelf

Shelf

Support

Fig. 2 Clip

8