DTP-800 SERIES
Balanced Snake, DB25 to 1/4 in TRS, 8 ch
Available in the following lengths:
2m (6.6 ft.), 3m(9.9 ft.), 4m(13.2 ft.), 5m(16.5 ft.), 7m(23.1 ft.).
Pinout Diagram
NOTE: this view is from the “INSIDE” of the Multi-pin
(D-Sub) connector. It depicts the view as seen from the solder terminals. The MALE pins are on the other side. This is essentially a “Mirror” view.
25 |
13 |
=> n/a |
|
|
|
13 |
|
|
|
|
25 |
=> Ground |
Channel 1 |
|
|
12 |
=> Negative |
|
|
|
24 |
=> Positive |
|
|
|
11 |
=> Ground |
Channel 2 |
|
|
23 |
=> Negative |
TIP = POSITIVE |
|
|
10 |
=> Positive |
|
|
|
22 |
=> Ground |
Channel 3 |
RING = NEGATIVE |
|
9 |
=> Negative |
||
|
8 |
=> Ground |
|
SLEEVE = GROUND |
|
21 |
=> Positive |
|
|
|
20 |
=> Negative |
Channel 4 |
|
|
7 |
=> Positive |
|
|
|
19 |
=> Ground |
Channel 5 |
|
|
6 |
=> Negative |
|
|
|
18 |
=> Positive |
|
|
|
5 |
=> Ground |
Channel 6 |
|
|
17 |
=> Negative |
|
|
|
4 |
=> Positive |
|
|
YXM-12 |
16 |
=> Ground |
Channel 7 |
|
3 |
=> Negative |
|
||
|
15 |
=> Positive |
|
|
|
2 |
=> Ground |
Channel 8 |
|
|
14 |
=> Negative |
|
|
14 |
1 |
=> Positive |
|
|
1 |
|
|
|
|
|
|
|
|
Enlarged, Not To Scale.
DTP-800 SERIES
HOSA TECHNOLOGY , 6650 CABALLERO BLVD., BUENA PARK, CA 90620 |
PHONE: 714.522.8878 FAX: 714.522.4540 |